? indicator on 6300

I have nokia 6300 that works fine but there is just one problem. very often, when i restart my phone, i see a ? indicator on screen and it disappears after restarting the phone for serveral times. this ? indicator is the one that appears with files with unknown formats. i cant understand why it appears where indicators are supposed to appear on main screen when i restart the phone (it doesnt happen always but very often) can someone tell me the reason and solution?

i never used any picture as wallpaper. i am using the default nokia theme. even if i remove the wallpaper it keeps appearing on blank white screen. so i have to resrart it for several times.it doesnt't harm me, but ofcourse, bothers a lot as i love my cute screen of 6300 and this indicator spoils its beauty.

Similar Messages

  • 6300 and an indicator that is not described in the...

    Hi
    I have the Nokia 6300 and the day after I got the phone a symbol/indicator turned up on my display screen and no body knows what it is. The manual tells nothing. It kind of looks like a printer in fact its a square on top of a rectangle. It only appears on the display screen when you go into the menu it disappears.
    Can anyone help its annoying and the orange shop say this is the second phone they've seen with the symbol and they don't know what it is.

    If you are talking about the yellow line symbol, this means that you have the voice clarity feature switched on - this is supposed to reduce background noise whilst making calls in crowded or noisy places.
    To switch it off, Menu > Settings > Call > Voice Clarity > Inactive

  • 6300 - Call Indicator - What is it?

    When I answer a call on my Nokia 6300, a yellow indicator appears next to the 'G' icon as a wavy line (almost like a 'W').
    Can anyone tell me what this is?
    I've had a look around but can't find the answer....
    Thanks
    Steve
    P.S. The only change I have made recently is put a new MicroSD Card in the phone.

    Thanks a lot. Once read your answer I could obviously find zilions of same answered questions on the Internet.
    I'd probably find it out myself if it looked just a little bit like sinus wave but it's pretty triangular. Wouldn't like to listen to such a "clear" voice
    Seems this icon has been forgotten in the manual which local Nokia support asked me to read.
    Regards
    MP
    Message Edited by miroslavpragl on 07-Apr-2008 10:12 AM

  • 6300 strange indicator resembling a cassette or fi...

    I'm just getting started with a new Nokia 6300.
    I need lots of help, being old.
    On the screen there's an Indicator symbol looking like the end view of a roll of flim or a cassette tape. It's not in the manual (why not ?) , should i try to remove this?
    Also I have a Mac. (OSX, version 10.3.9) Can I use the 'PC Suite' ? I've just printed off the Users Guide, but that's all.
    I have dowloaded some free MP3 pieces to use as ringtones (the ones supplied are useless) - so how can I transfer them into my phone.?
    ps
    Why was there no good loud continous ring on this phone, I'm going to miss calls if I use these tinkly soft tunes
    Solved!
    Go to Solution.

    I have the same indicator on my Nokia 6300. It does look like voicemail notification, but I have checked my voice message box and there are no new or saved messages.
    Has anyone got any idea how I can get rid of this indicator.  It is disturbing my sense of order!
    Thanks...

  • "No Internet Access" indicator, but internet access works

    We've got a few machines at a couple different clients that have the windows networking systray exclamation mark indicating limited network connectivity.  The supposed error is "no internet access", though the internet works fine in every
    case.  It is a very visible issue generating a lot of complaints, and the clients have a tendency to associate it with all kinds of other unrelated problems.
    To clarify:
    Not all machines have the icon
    Problem machines all have the same basic setup as non-problem machines
    Some problem machines are win8, some win7
    They don't share common hardware specs
    I have tried several things, including:  reset ip stack, give manual ip settings to network adapter, disable ipv6, disable/re-enable adapter, all without success.
    I don't know where to go to troubleshoot this.  Is there a log with this info?  Is the network connectivity check process well documented somewhere?

    The issue occurs on ethernet and wireless.  I haven't been able to tell what the problem machines have in common.  The issue is basically permanent.  Sometimes an IP stack reset will "cure" the problem temporarily, but it returns.
    Here's an ipconfig /all from one of the trouble machines:
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : XXXXXXX
       Primary Dns Suffix  . . . . . . . : klc.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : klc.local
    Wireless LAN adapter Wireless Network Connection 2:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : 
       Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
       Physical Address. . . . . . . . . : 24-77-03-9E-xx-x1
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Wireless LAN adapter Wireless Network Connection:
       Connection-specific DNS Suffix  . : klc.local
       Description . . . . . . . . . . . : Intel(R) Centrino(R) Ultimate-N 6300 AGN
       Physical Address. . . . . . . . . : 24-77-03-9E-xx-x2
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::edb8:5d03:14cc:3f8d%13(Preferred) 
       IPv4 Address. . . . . . . . . . . : 10.100.30.105(Preferred) 
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Tuesday, October 07, 2014 10:35:54 AM
       Lease Expires . . . . . . . . . . : Wednesday, October 08, 2014 12:08:32 AM
       Default Gateway . . . . . . . . . : 10.100.30.1
       DHCP Server . . . . . . . . . . . : 10.100.20.100
       DHCPv6 IAID . . . . . . . . . . . : 237270787
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-CA-29-8A-D0-67-E5-54-28-5C
       DNS Servers . . . . . . . . . . . : 10.100.20.100
       Primary WINS Server . . . . . . . : 10.100.20.100
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Local Area Connection:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : klc.local
       Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connection
       Physical Address. . . . . . . . . : D0-67-E5-54-xx-xx
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes

  • 6300 (7.21 firmware) constantly asks me for permis...

    Hi,
    I bought a second-hand 6300.  After having to send it away to get it unblocked, I got it back and the first thing I did was update from the old (4.something) firmware to the latest.  Then I installed some apps.  Almost all apps are not allowed to access the smart card, even though they're installed on it.  The options for "always allow" are greyed out when I select them in the application settings.  Some applications ask every single time - and this is ridiculous because for a map application, or a media player, I'm literally hitting "Yes, please allow access" hundreds of times in a row.
    Is this because I upgraded to the latest firmware?  Is there anything I can do to stop having to manually allow access to the smart card every single time ?
    Thank you.

    well I have the exact same problem, like an idiot I updated for the sake of it, found this thread "during" the update and thought oh no.
    The first time the battery indicator worked so I thought no pronlem, but now after a charge it is staying on full after 2 days, either the firmware improved battery consumption or its now broken as usually it will be going down by now.
    How do I report this bug as the other guy posted here 2 years ago and still no new firmware to fix it, I would consider it unfair I would have to buy a new phone to fix this.

  • MSI 990FXA-GD65 + AMD FX-6300 + 16GB 1866MHz RAM Won't Boot

    Hello,
    Today I received parts for my new gaming system (sans water cooler, using the stock heatsink+fan until then), however I'm experiencing problems with the setup.  The specs are as follows:
    - MSI 990FXA-GD65
    - AMD FX-6300 CPU
    - GSKILL 16GB (2x8GB) 1866MHz DDR3 RAM
    - Kingston SSDNow V300 120GB SSD
    - 2x MSI GeForce GTX 660 Ti
    - EVGA NEX750B1 PSU
    - BitFenix Comrade case
    Upon powering on (after assembly), the Phase Indicator only has the first two LEDs lit up (Phase 2 Power Mode, according to the manual).  No output is displayed on screen.  I've tried removing and re-inserting the CPU and removing one of the graphics cards, to no avail.
    I would appreciate any help/advise that could be offered, that I might get this system up and running!
    Kind Regards

    Try to run this system out of the case on non conductive area (e.g. plain cardboard) with 1 stick of RAM only, 1 GPU (try without any graphics cards too), single HDD/SSD, PSU of course, CPU+cooler and monitor+keyboard and mouse. When booting spam Delete and it should take you to the BIOS where you have to change timings of RAM suggested in the post about GSkill memory.
    If possible, borrow different brand of RAM to test your PC with.
    Make sure that if you're running single GPU, that video cable is connected to the card. If no GPU, then to the motherboard.

  • Nokia 6300 - Blue Lights Always Faintly On ??

    Hi there
    I have a nokia 6300 and I'm not sure what the deal is but when I lock the phone and it goes to sleep mode, the blue LED lights on the side are faintly/half on
    Why is this?

    Hi,
    Not entirely sure about this but I think it is similar to N81/N96/5610 light function - does the blue led breatheThat's the term). It is normal for the led to breathe since it is mainly used as an indicator and for notifications - perhaps something used to beautify the phone?
    Message Edited by nj15 on 15-Jan-2009 07:14 PM

  • Nokia 6300 - Blue Lights Faintly On ??

    Hi there
    I have a nokia 6300 and I'm not sure what the deal is but when I lock the phone and it goes to sleep mode, the blue LED lights on the side are faintly/half on
    Why is this?

    Hi,
    Not entirely sure about this but I think it is similar to N81/N96/5610 light function - does the blue led breatheThat's the term). It is normal for the led to breathe since it is mainly used as an indicator and for notifications - perhaps something used to beautify the phone?
    Message Edited by nj15 on 15-Jan-2009 07:14 PM

  • T430 2349 WLAN Indicator always on

    Hi everyone,
    I have a problem with the LED-Indicator of my T430 2349: It is always on.
    As soon as I power on the laptop (windows has not yet booted), the LED-Indicator is constantly on. When Windows is booted, Fn+F7 and switching off the WLAN does not turn off the LED indicator. Only the hardware switch, that powers off the WLAN-Card, switches off the indicator LED. The indicator does not blink when data is received.
    I already searched the community, and though there is one other case where this problem was reported, the solution is not relevant for me, as it implied switching of the WWAN card which I do not have. (see: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/WLAN-LED-indicator-stuck-on/m-p/294486/high...
    I also already tried creating the registry entry "LedMode" - no success either.
    The W-Lan adapter is an Intel 6300 Ultimate.
    Every advice is much appreciated.
    Best wishes,
    KeepOnTalking

    Hi
    Remove the battery and AC adaptor.
    Wait some hours (2-3 hours) and then press Power button.
    Then insert the battery and connect AC adaptor and check if the indicator would be on even if the WLan is disabled.

  • Network Signal Indicator

    For some reason, the network signal indicator on the right side "task bar" on my W510 no longer lights up in green or changes shape to differentiate between an Ethernet versus wireless connection.  Any ideas?

    Hello mate,
    Try to reinstall access connection : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73682
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Delivery Completed Indicator  - Open PO Quantity Issue

    Hi All,
    I have an issue relating to our Open Purchase Order Report.  I have some POs which are appearing on the report eventhough they are marked, 'Delivery Complete' ie NOT open. The example of a PO is where the PO Quantity is 100 and the Goods Receipt is 99.  The user knows that there will be no further deliveries and therefore marks the PO 'Delivery Complete'
    In the Extractor to BI we have extracted this field ELIKZ 'Delivery Completed Indicator'.  The structure of our datamodel is
    PSA -> DSO (Write Optimised DSO) -> Cube
    We calculate the Open PO Qty by taking 'PO Qty' minus 'Goods Receipt Quantity' I have checked the example PO in the cube & DSO.  I can see that for the infoobject 'Delivery Complete Indicator' that it has been marked 'X' but only on the records relating to the Goods Receipt for this PO.  The original PO record is added to the cube eg on 1st Jan and then the Goods Receipt record, including the delivery complete indicator is added to the cube on 31st Jan, but the original record is not updated by this indicator.  Therefore at the moment I cannot use this to filter out records in my query.  See below how it looks in the Cube;
    Created Date - PO No - PO Line - Del Complete Indicator - PO QTy - Goods Receipt Qty
    01.01.2011       123      10             (Blank)                             100
    31.01.2011       123      10                 X                                                         99
    What should I do?  How have you created this report?
    Just to let you know I have already read the post Delivery Completed Indicator(ELIKZ:0COMPL_DEL) in 2LIS_02_SCL
    Many thanks for your help,
    Michelle

    Hi Kalyan,
    Thanks very much for your message,
    In my case if the Order Qty is not equal to receipted this does not always mean that it is open.  Sometimes the receipted quantity can be over or under (not equal) and the PO can be closed.  What do you mean by confirmed quanity?  Also, this is a Purchase Order report not a Sales report.
    You have said...
    "Then I would suggest to still keep the condition on the Net ord qty and Net confirmed qty and exclude the del compl indicator as X and also the status as open "
    I don't understand how this will work.  My issue is that the indicator is not on all the records of a PO only the receipted records.
    Can you help again please?
    Many thanks
    Michelle

  • How can I delete an E-Mail account in Nokia 6300

    I have setup an E-Mail account (e.g Gmail) on my Nokia 6300. I would like to delete this account which is no longer needed. I couldn’t find any delete option there. Before Nokia 6300, I have used Nokia E-50. It has a very simple option in Connect folder to delete or manage these E-mail accounts. Waiting for you response.
    Waqas Zubair.Message Edited by pespilost on 11-May-200712:37 PM

    Simply enter the configurations menu from settings, go to personal config and the account should be listed there, select options and delete.
    Simple! :-)
    iPhone 5 32GB
    MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

  • In list view in ibooks i have an indicator that looks like a media stop eg || in a circle on many lines. What is it

    All of a sudden using Ibooks on my Ipad - many lines in list view have this indicator || inside a circle appearing on the far right and the books no longer open.  I can find nothing about this in help. What is it and what does it mean
    Peter Rowan

    Hi John, I'm guessing that icon is created and updated by an extension. I'm not sure which one, though. Maybe something that is tracking the trackers, like Lightbeam? Have you tried hovering your mouse over the icon to see whether a tooltip appears, or clicking it?

  • Deactivate Goods receipt indicator on PO Delivery Tab

    Dear Experts
    My client would like that system would not require goods receipt (non-GR based PO) for PO line items of respective material group (services) - goods receipts should even not be possible so GR indicator on the delivery tab should be ticked-off.
    Since the client is using one-client system with multiple company codes on same client this requirement should be valid not on a client- but on a company code- or plant-level.
    Please advise how to approach to this challenge. Is it possible to set it up via customizing or some programming is required.
    Thank you in advance for any hint.
    Best regards
    Miha Egart

    Hi Jürgen,
    I have checked the Network, it is not stock managed.
    But there is another PO in which the network is not stock managed but The GR indicator is set for the PO.
    I am doing PR conversion through ME59 just against info record not against contract.
    Instead of automatically converting PR through ME59/ME59N, if I am trying to do it directly through ME21N, the GR tick is set. But the client will not do this, they will do automatic conversion of PR's only.
    Can you please suggest some other possibilities.
    Regards,
    Krishna Bharadwaj.

Maybe you are looking for