Indicator: Storage costs per day

Hi,
In the SNP Optimiser input logs, if you go to ET- LOCMAT (Location Products), there is a 5th column Ind: Storage Costs Per Day.
Where do you set this indicator?
Nitin Thatte

Hi
In the Optimiser Profile itself there is a setting that either "penalises" you for the storage cost per bucket or per each day within the bucket.
It depends on your system as to exactly where it is, for example in SCM 5.0 it is on the "Model Params" tab under the section "Bucket Length", the settings you want is "Average Stock on Hand"
Not very intuative I know, but it will then set that indicator in ET_ARCMAT for you.
Regards
Ian

Similar Messages

Reg :Production order cost report day wise.

Dear Expert,
1.We want a report for a particular Production order cost day wise.
The scenario is like this Production order is Released for 100 Qty.
Today they confirmed only 50 Qty.
Tomorrow they will confirm 50 qty.
Now they want to see the cost for today confirmation and tomorrows confirmation.
Reason being daily the Raw Material cost is changed and they want to track the variance.
Is there any standard report we can achieve this or do we have go for development
2. And also i need to know daily how many production orders have been released.
Thank u in advance.

A day is not a controlled cost object. You could write a report to look at costs gathered in a day (by reporting date), but I strongly suggest that if you need to analyze costs per day you switch to daily orders.
You'll find then that all the standard processes work for you.

Please note that i am seeking some assistance with adding the followng resource: A maximum of 4 resources can be added at an additional cost of $500 per day per resource.

Hi, Please note that i am seeking some assistance with adding the following resource to a task in Microsoft Project 2010:
A maximum of 4 resources can be added at an additional cost of $500 per day per resource.

Hi Clemence,
Your post has quite little details, but as far as I understand, you want to add 4 resources on a task, each resource costing 500$ a day. Since it is not mentionned if it is generic resources (skill or role) or named resources, I'll assume that it is generic
resources. Based on this understanding, here is a proposal:
Go to the resource sheet,
Create a work generic resource ("type" field set to "work", "generic" field to "yes"), typing in the resource name field the skill name,
In the max unit field, enter 400% for 4 resources (for just 4 if your Project 2010 is configured to display units in decimals),
Since the rate is an hourly rate, make the calculation : 500$ per day / 8 hours a day = 62,5$ per hour,
Go back to the Gantt Chart, split the window (click "detail" in the view tab of the ribbon),
Select your task and assign the newly created resource with a given % units.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

My credit limit is$700US per day .How can I pay for an item costing $815?

My credit limit is $700 per day. I have purchased an item for$815.How can I pay for it?

If you tried to make a purchase from Apple.com, they offer you the opportunity to add a second credit card if you have one. If you do not have one, then you need to contact the back or institution that handles your credit card for them to approve the purchase.
Just so you know, you are not addressing Apple here, we are users like you.

Report needed for storage costs in WM

Hi All,
I need a report for the storage costs for utilising the warehouse by plants. Cost of space utilised per m3 will be provided in selection screen. For each material the volume should taken from material master. Warehouse will be utilised by three plants and report needed to calculate the space occupied by the materials in warehouse per plant per month. I am not able to find the logic to calculate average space utilised(as day to day there will putaways,transfer postings and picking).All stocks to be taken into consideration.Let me know how to proceed.
Regards,
Manik

Dear Experts,
Cud u plz throw some light on this...
Regards,
Manik

HT4847 If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free? So that you are rewarded for the additional devices?

If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free? So that you are rewarded for the additional devices?
If this multi purchase if devices is not rewarded with a larger cloud storage being available, would it then be best to have several separate cloud accounts?
Would you lose the ability to mesh data between devices??? Of could you choose to share a smaller part of the data and yet save the rest of the device data to their own cloud? So in other words, split a devices stored data between 2 different icloud accounts? One community iCloud account for partial data and individual account for data that does not need to be shared with the other devices, however it needs to be backed up. The simpler solutions would be If you have several Apple devices feeding to the same iCloud account, an amount of storage made available per device (ie: 5 units of storage free per device)
~ So that you are rewarded for the additional Apple devices by giving 5 more units of storage or backup space per device

Nobody here is an Apple employee, and my Christmas Season has been great, thanks very much. Neither am I jealous, I just abhor the fact that so many people these days expect more and more for free, in addition to what they already get for free. First world problems...
Obviously Apple do consider people with multiple devices, since the whole purpose of the service is to keep data in sync across multiple devices. Clearly, after consideration, Apple decided to give 5GB of storage for free and provide customers with the option to buy more storage if they want/need more, in line with competing services.
Everyone has their own set of unique circumstances but does that mean everyone should be rewarded with extras for free? At what point should it be considered acceptable to actually pay for additional extras you want?
And by the way, somebody expressing a different opinion, and discussing people's expectations is not being rude. Aren't you from the country that supposedly takes 'freedom of speech' rather seriously?

HP OfficeJet Pro 8600 - The Really High Cost Per Page

On February 6, 2014 I bought an HP OfficeJet Pro 8600 all-in-one, including the OPTIONAL tray 2.
I use it in my home office with five computers. One is a new Apple MacBook Pro OS 10.9.5, another is a three year old HP Laptop on Windows 7, and another is a five year old Dell Desktop still on Windows XP.
I bought the printer to . . . print. I thought I might be a nice convenience to write business correspondence and print an envelope, without the need to change paper, or otherwise touch the printer until I was ready.
The printer is advertised, even in the user manual and box, to be capable of 1200 dpi printing, even though it uses the below average PCL Print Driver and not Post Script.
The printer works fine, but the HP driver and utility software must be written for a different printer. If I put HP Inkjet 20# paper in tray 2, and #10 envelopes in a locked tray 1, I can print at the "best print setting" which still isn't great. But it works.
If I put HP Premium Presentation Paper 32# paper in tray 2 ($8.00 per 100 sheets), and the same quality #10 envelope in tray 1, the printer software loses it's mind. It performs the same on all five computers.
When I try to print a business letter and envelope the print driver and HP utility grays out tray 2, and it grays out the "best" print setting. In short the only choice is NOT to use HP brand papers, or remove tray 2, print the business letters, and then remove the 8.5X11 HP Premium Paper, install envelopes, and print again. Not what I had in mind.
I've been in touch with HP as the printer is still under warranty. They offered a replacement, that will have the same printer an utility problems, or to buy it back at $175.
I bought the original printer for $249, tray 2 for $125, and 5 XL print cartridges for $149. That is a total of $588. If I sell it back to HP check out the cost per page. At $588 - $175 = $413/2742 total pages = 15 cents a page! Owch!!!
There is nothing wrong with the printer as such. The problem is the HP Utility and Driver. When did HP stop using a traditional warranty, and give pennies on the dollar, when they clearly have a software problem, they refuse to fix?

Hi there @Oceankey , welcome to the forums
I understand your Officejet 8600 is no longer copying an entire page from the scanner bed.
I am unsure of which troubleshooting steps you have tried for this problem however, I would suggest updating the firmware (if needed), power resetting the printer and to ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Getting the Latest Firmware and Product Updates
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a wonderful day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Firefox crashes multiple times per day

Hello all!
As of the last month or two, Firefox now crashes multiple times per day (even in Safe Mode). Firefox is fully updated, as are my Add-ons and Extensions.
Yesterday alone, it crashed 14 times (which is about average).
System Info:
Windows 7 Home Premium
Intel Core i7-3610QM CPU @ 2.30 GHz
8.00 GB RAM
64-bit OS
Troubleshooting details:
"application": {
"name": "Firefox",
"version": "30.0",
"userAgent": "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:30.0) Gecko/20100101 Firefox/30.0",
"supportURL": "https://support.mozilla.org/1/firefox/30.0/WINNT/en-US/"
"crashes": {
"submitted": [
"id": "bp-56f4b9d3-7646-4804-b1f0-6b86a2140712",
"date": 1405205216202,
"pending": false
"id": "bp-252f490e-dbc4-4b6c-89bb-abc7a2140712",
"date": 1405205139899,
"pending": false
"id": "bp-728dabc3-d5ae-42cc-a7b3-5ef922140712",
"date": 1405204414387,
"pending": false
"id": "bp-f4cf2971-3a0d-4737-b3e4-81c2f2140712",
"date": 1405204325838,
"pending": false
"id": "bp-717ff5d6-7edf-49c7-956f-247e52140712",
"date": 1405204300027,
"pending": false
"id": "bp-e0f0c131-39c9-40e3-b6aa-45c312140712",
"date": 1405184955514,
"pending": false
"id": "bp-8f6e4e47-0363-48d2-a7ff-875b92140712",
"date": 1405184937698,
"pending": false
"id": "bp-9245429c-ccfc-41fa-9edd-79baa2140712",
"date": 1405184884426,
"pending": false
"id": "bp-5e91822b-8fc3-411c-bcf7-c753f2140712",
"date": 1405184798033,
"pending": false
"id": "bp-db406fb0-7045-41a5-b42c-522db2140712",
"date": 1405183704121,
"pending": false
"id": "bp-6c913909-d1ef-4773-9712-fa1b92140712",
"date": 1405183678385,
"pending": false
"id": "bp-65a30f3e-da4a-406b-9bfa-8cec72140712",
"date": 1405178435488,
"pending": false
"id": "bp-11fbb2a8-923f-4ab3-b577-6dbe32140712",
"date": 1405178411720,
"pending": false
"id": "bp-968183f6-086d-430a-a993-f1d892140712",
"date": 1405127322874,
"pending": false
"id": "bp-017688f8-afc7-4b90-8fa7-2be692140711",
"date": 1405040514173,
"pending": false
"id": "bp-342b9f6c-3ffd-489e-ae1c-b5ac62140711",
"date": 1405037808744,
"pending": false
"id": "bp-62c1ea5a-24da-421f-9983-9b09c2140711",
"date": 1405037772426,
"pending": false
"id": "bp-a7227128-b4dd-4cd5-997c-b9f132140711",
"date": 1405037229671,
"pending": false
"id": "bp-2d0b1114-0d86-4f2b-ba7d-20f902140711",
"date": 1405037207333,
"pending": false
"pending": 1
"modifiedPreferences": {
"accessibility.typeaheadfind.flashBar": 0,
"accessibility.browsewithcaret": true,
"browser.cache.disk.capacity": 358400,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.disk.smart_size.use_old_max": false,
"browser.cache.disk.smart_size_cached_value": 358400,
"browser.places.smartBookmarksVersion": 7,
"browser.sessionstore.upgradeBackup.latestBuildID": "20140605174243",
"browser.startup.homepage_override.mstone": "30.0",
"browser.startup.homepage": "https://www.bing.com/",
"browser.startup.homepage_override.buildID": "20140605174243",
"dom.mozApps.used": true,
"extensions.lastAppVersion": "30.0",
"font.internaluseonly.changed": false,
"gfx.direct3d.last_used_feature_level_idx": 0,
"network.cookie.prefsMigrated": true,
"network.cookie.cookieBehavior": 2,
"places.database.lastMaintenance": 1405257179,
"places.history.expiration.transient_current_max_pages": 104858,
"plugin.state.npitunes": 0,
"plugin.state.npesnsonar": 0,
"plugin.state.npesnlaunch": 0,
"plugin.importedState": true,
"plugin.state.npsitesafety": 0,
"plugin.state.npauthz": 0,
"plugin.disable_full_page_plugin_for_types": "application/pdf,application/vnd.adobe.xfdf,application/vnd.fdf,application/vnd.adobe.xdp+xml",
"plugin.state.npwlpg": 0,
"plugin.state.npffwloplugin": 0,
"plugin.state.npdeployjava": 0,
"plugin.state.np_wtapp": 0,
"privacy.cpd.offlineApps": true,
"privacy.cpd.sessions": false,
"privacy.donottrackheader.enabled": true,
"privacy.sanitize.migrateFx3Prefs": true,
"storage.vacuum.last.places.sqlite": 1405258871,
"storage.vacuum.last.index": 0
"graphics": {
"numTotalWindows": 2,
"numAcceleratedWindows": 2,
"windowLayerManagerType": "Direct3D 10",
"windowLayerManagerRemote": false,
"adapterDescription": "Intel(R) HD Graphics 4000",
"adapterVendorID": "0x8086",
"adapterDeviceID": "0x0166",
"adapterRAM": "Unknown",
"adapterDrivers": "igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32",
"driverVersion": "9.17.10.2843",
"driverDate": "8-21-2012",
"adapterDescription2": "NVIDIA GeForce GT 650M ",
"adapterVendorID2": "0x10de",
"adapterDeviceID2": "0x0fd1",
"adapterRAM2": "2048",
"adapterDrivers2": "nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um",
"driverVersion2": "9.18.13.3788",
"driverDate2": "5-19-2014",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.2.9200.16571",
"clearTypeParameters": "Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 100 ",
"webglRenderer": "Google Inc. -- ANGLE (Intel(R) HD Graphics 4000 Direct3D9Ex vs_3_0 ps_3_0)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureSkiaAccelerated": 0,
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10.6",
"version": "4.10.6"
"NSS": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSUTIL": {
"minVersion": "3.16",
"version": "3.16"
"NSSSSL": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSSMIME": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"userJS": {
"exists": false
"extensions": [
"name": "Norton Toolbar",
"version": "2014.7.2.6",
"isActive": true,
"id": "{2D3F3651-74B9-4795-BDEC-6DA2F431CB62}"
"name": "Norton Vulnerability Protection",
"version": "12.2.0.5 - 1",
"isActive": true,
"id": "{BBDA0591-3099-440a-AA10-41764D9DB4DB}"
"name": "Troubleshooter",
"version": "1.1a",
"isActive": true,
"id": "[email protected]"
"name": "Windows Media Player Extension for Firefox",
"version": "1.1",
"isActive": true,
"id": "jid0-nRwp7VvCqZcSRTppwWz2npqGEKw@jetpack"
"name": "HTTPS-Everywhere",
"version": "3.5.3",
"isActive": false,
"id": "[email protected]"
}

Was discussed here - https://support.mozilla.org/en-US/forums/contributors/709022 - in Feb 2013. And Bug #738661 was filed in March of 2012, with the consensus being.
'''"In that case this is more likely a bug in Covenant Eyes than it is a bug in Firefox. If we have no hope of success through engaging with Covenant Eyes and can't blocklist the offending DLL from loading, can we at least get a support article posted instructing users how to work around this issue (ie. removing Covenant Eyes or switching to a different browser)?'''
'''Additionally, I don't see much point in keeping this bug in the NEW state if it's unreasonable to expect that we'll ever fix this."'''

Calculate Per Day Salary Into Text Field

HI,
I want to calculate per day Salary so that i am using Code .i am enter salary in to :P65_SALARY1 text fiedl and calculated per day salary should come into :P65_per_day_salry text field. I have write that code in to item Source and select
Source Used :-Always.replacing any existing value in session state
Souce Type :- PL/SQL Expression or Function
Source value or expression :- Type That below Code
I have created item :P65_MONTH for Select Month
BEGIN
IF :P65_MONTH ='JAN' THEN
:P65_SALARY1/31;
ELSIF :P65_MONTH ='FEB' AND MOD(TO_CHAR(SYSDATE,'YYYY'),4)!=0 THEN
:P65_SALARY1/28;
ELSIF :P65_MONTH ='FEB' AND MOD(TO_CHAR(SYSDATE,'YYYY'),4)=0 THEN
:P65_SALARY1/29;
ELSIF :P65_MONTH ='MAR' THEN
:P65_SALARY1/31;
ELSIF :P65_MONTH ='APR' THEN
:P65_SALARY1/30;
ELSIF :P65_MONTH ='MAY' THEN
:P65_SALARY1/31;
ELSIF :P65_MONTH ='JUN' THEN
:P65_SALARY1/30;
ELSIF :P65_MONTH ='JUL' THEN
:P65_SALARY1/31;
ELSIF :P65_MONTH ='AUG' THEN
:P65_SALARY1/31;
ELSIF :P65_MONTH ='SEP' THEN
:P65_SALARY1/30;
ELSIF :P65_MONTH ='OCT' THEN
:P65_SALARY1/31;
ELSIF :P65_MONTH ='NOV' THEN
:P65_SALARY1/30;
ELSIF :P65_MONTH ='DEC' THEN
:P65_SALARY1/31;
END IF;
END;When i run Page 65 Then Show me error
ORA-06550: line 1, column 27: PLS-00103: Encountered the symbol "BEGIN" when expecting one of the following: ( - + case mod new not null avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp interval date pipe
Error      ERR-1020 Error in PLSQL item processing (function).
Now Please Tell me how can i calculate Per Day Salary And How to remove that Error.
Thanks

HI,
i have to change according to you but that give me error like.
ORA-06550: line 5, column 13: PLS-00103: Encountered the symbol "/" when expecting one of the following: := . ( @ % ; indicator The symbol ":= was inserted before "/" to continue. ORA-06550: line 7, column 13: PLS-00103: Encountered the symbol "/" when expecting one of the following: := . ( @ % ; indicator The symbol ":= was inserted before "/" to continue. ORA-06550: line 9, column 13: PLS-00103: Encountered the symbol "/" when expecting one of the following: := . ( @ % ; indicator The symbol
Error      ERR-1904 Unable to compute item default: type = Function Body computation_type= BEGIN IF :P65_MONTH ='JAN' THEN :P65_SALARY1/31; ELSIF :P65_MONTH ='FEB' AND MOD(TO_CHAR(SYSDATE,'YYYY'),4)!=0 THEN :P65_SALARY1/28; ELSIF :P65_MONTH ='FEB' AND MOD(TO_CHAR(SYSDATE,'YYYY'),4)=0 THEN :P65_SALARY1/29; ELSIF :P65_MONTH ='MAR' THEN :P65_SALARY1/31; ELSIF :P65_MONTH ='APR' THEN :P65_SALARY1/30; ELSIF :P65_MONTH ='MAY' THEN :P65_SALARY1/31; ELSIF :P65_MONTH ='JUN' THEN :P65_SALARY1/30; ELSIF :P65_MONTH ='JUL' THEN :P65_SALARY1/31; ELSIF :P65_MONTH ='AUG' THEN :P65_SALARY1/31; ELSIF :P65_MONTH ='SEP' THEN :P65_SALARY1/30; ELSIF :P65_MONTH ='OCT' THEN :P65_SALARY1/31; ELSIF :P65_MONTH ='NOV' THEN :P65_SALARY1/30; ELSIF :P65_MONTH ='DEC' THEN :P65_SALARY1/31; END IF; END;.
OK
How can i remove this.
Thanks

OSPF problem: Neighbor Down 1-2 times per day

Hi
We have 4 devices are running OSPF (3 cisco routers and 1 Juniper firewall as show in attachment file). In last few months, we got Neighbot Down message almost 1-2 times per day. Network between them interrupt for a short time and even monitoring mechanism does not aware the interruption(down time is too short). Could I have your advice of any possible root cause to this problem?
Timer intervals configured to all devices are same: Hello 10, Dead 40, Wait 40, Retransmit 5
Neighbor A
Neighbor A#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
172.16.255.128 1 FULL/DROTHER 00:00:34 172.16.108.11 GigabitEthernet0/11
172.16.255.130 1 FULL/DR 00:00:33 172.16.108.2 GigabitEthernet0/11
172.16.255.64 1 FULL/DROTHER 00:00:34 172.16.107.1 GigabitEthernet0/12
172.16.255.128 1 FULL/DROTHER 00:00:38 172.16.107.11 GigabitEthernet0/12
172.16.255.130 1 FULL/DR 00:00:38 172.16.107.7 GigabitEthernet0/12
Neighbor A#show log
Mar 16 06:03:33.159: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.128 on GigabitEthernet0/12 from FULL to DOWN, Neighbor Down: Dead timer expired
Mar 16 06:03:50.137: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.128 on GigabitEthernet0/12 from LOADING to FULL, Loading Done
Mar 16 21:15:05.509: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.64 on GigabitEthernet0/12 from LOADING to FULL, Loading Done
Neighbor B
Neighbor B#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
172.16.255.128 1 FULL/DROTHER 00:00:36 172.16.108.11 GigabitEthernet0/11
172.16.255.129 1 FULL/BDR 00:00:35 172.16.108.1 GigabitEthernet0/11
172.16.255.64 1 FULL/DROTHER 00:00:39 172.16.107.1 GigabitEthernet0/12
172.16.255.128 1 FULL/DROTHER 00:00:30 172.16.107.11 GigabitEthernet0/12
172.16.255.129 1 FULL/BDR 00:00:35 172.16.107.6 GigabitEthernet0/12
Neighbor B#show log
Mar 16 06:03:33.143: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.128 on GigabitEthernet0/12 from FULL to DOWN, Neighbor Down: Dead timer expired
Mar 16 06:03:50.122: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.128 on GigabitEthernet0/12 from LOADING to FULL, Loading Done
Mar 16 21:14:58.054: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.64 on GigabitEthernet0/12 from LOADING to FULL, Loading Done
Mar 16 21:15:03.800: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.128 on GigabitEthernet0/12 from LOADING to FULL, Loading Done
Neighbor C
Neighbor C#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
172.16.255.129 1 FULL/BDR 00:00:35 172.16.108.1 FastEthernet0/1/0
172.16.255.130 1 FULL/DR 00:00:38 172.16.108.2 FastEthernet0/1/0
172.16.255.64 1 2WAY/DROTHER 00:00:30 172.16.107.1 FastEthernet0/0/1
172.16.255.129 1 FULL/BDR 00:00:35 172.16.107.6 FastEthernet0/0/1
172.16.255.130 1 FULL/DR 00:00:33 172.16.107.7 FastEthernet0/0/1
Neighbor C#show log
Mar 16 06:03:23.571: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.130 on FastEthernet0/0/1 from FULL to DOWN, Neighbor Down: Dead timer expired
Mar 16 06:03:25.479: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.129 on FastEthernet0/0/1 from FULL to DOWN, Neighbor Down: Dead timer expired
Mar 16 06:03:29.415: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.64 on FastEthernet0/0/1 from EXSTART to DOWN, Neighbor Down: Dead timer expired
Mar 16 06:03:50.112: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.129 on FastEthernet0/0/1 from LOADING to FULL, Loading Done
Mar 16 06:03:50.112: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.130 on FastEthernet0/0/1 from LOADING to FULL, Loading Done
Mar 16 21:14:53.740: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.130 on FastEthernet0/0/1 from FULL to DOWN, Neighbor Down: Dead timer expired
Mar 16 21:15:03.793: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.255.130 on FastEthernet0/0/1 from LOADING to FULL, Loading Done

I think no L2 loops in the network. We have spanning tree configured on switches connecting to router A & B.
VLAN0108
Spanning tree enabled protocol ieee
Root ID    Priority    32876
             Address     5c50.15a3.8480
             This bridge is the root
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority    32876 (priority 32768 sys-id-ext 108)
             Address     5c50.15a3.8480
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
             Aging Time 300 sec
Interface           Role Sts Cost      Prio.Nbr Type
Gi1/0/45            Desg FWD 4         128.45   P2p Edge
Gi1/0/47            Desg FWD 19        128.47   P2p Edge
Gi1/0/48            Desg FWD 4         128.48   P2p Edge
VLAN0107
Spanning tree enabled protocol ieee
Root ID    Priority    32875
             Address     5c50.15ec.f000
             This bridge is the root
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority    32875 (priority 32768 sys-id-ext 107)
             Address     5c50.15ec.f000
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
             Aging Time 300 sec
Interface           Role Sts Cost      Prio.Nbr Type
Gi1/0/45            Desg FWD 4         128.45   P2p Edge
Gi1/0/47            Desg FWD 19        128.47   P2p Edge
Gi1/0/48            Desg FWD 4         128.48   P2p Edge

Manufacturing cost per unit

Hi.. Experts.
My client is in producing Perfumes (Process manufacturing- chemical Industry) and Production wants to know the cost of per unit manufactured in the plant/plants and explains this in form of the following points.
To arrive at manufacturing cost per unit we need to know
1) Per Unit cost of materials inclusive of transport (Raw & packaging material)
2) Conversion cost per unit which will include
a) Energy & other utilities expenses
b) Labor cost per unit (days wages of all in production / units produced)
c) Cost of quality--- including testing outside and chemicals used for testing in plant plus salary per day of people engaged in testing in q.c department.
d) Cost of administration-- employees engaged as well as office expenses like telephone,transport
Please consult me how to configure the above requirements in sap business one.
Regards
Rakhi

hi raakshit
The first point is where would u like to capture these records if its at the time of production order the it is easy
u can create UDF for all related items u have mentioned and fill the value manually and then in the production order either u can write the value manually or u can run A FMS which will sum up all the value and also the value of BoM ITEMS and would reflect in the total field
or if u wana add it in teh sales order i.e u want to show it at the time of sales then u can add all the items in the freight setup
Hope this would suffice your concern.
Regards,
Manish
Edited by: manish.malik on Jul 22, 2010 2:35 PM

Logic to calculate average number of employees per day...

Hi,
In an internal table, i have employee number, start date, end date.
This table shows employee's start and end dates for a cost center.
Now, the requirement is to calculate the average number of employees available per day for a given period...
Lets asume that we would like to calculate average number of employees per day for a given period of 30 days (01.01..2009 to 30.01.2009)....
The above table will have around 20 employees with their start and end date.
Among these 20, some may be present between 1st to 10th Jan only..
In such case, How to calculate average number of employees per day in such case?
Can anyone help me out with a rough sketch of logic for this calculation?
Thanks in Advance,
Pavan

My Logic:
1) First choose dates from which date to which date you are planning to calculate. [Here i am trying to calculate from Jan 1st 2008 to till date - March 3rd 2009 = So total days = 427 days]
2) First try to count number of days worked in organization by each employee. [Lets take employee a = 10 days, b = 182 days, c = 427 days].
3) Then total all the number of days. [abc = 10182427 = 619 days].
4) Total number days / Total number of days worked = 619 / 427 = 1.44 employees per day.
Employee     Emp-Start Date     Emp-End Date     No. of days
a             Jan 1st 2008     Jan 10th 2008     10
b             Jun 1st 2008     Jun 30th 2008     182
c            Jan 1st 2008     3rd March 2009     427
          Total No. of days                     619
     From Jan1st 2008 to Till date 3rd March 09          427
          619 / 427 =     1.449648712
I tried take simple example to recheck the above scenario is correct or not. If 'n' number of employees worked for an organization in a year (365 days) is 730. then per day = 730 / 365 = 2 employees per day worked for organization.
I am not sure my logic is correct or not ... just tried like above.
Regards,
~Satya

Shipment cost per shipment

Hi,
My user requiremnt is they want one time cost per shipment irrespetive of number of deliveries in the shipment.They are using one condition type for his .While vi01 cost should come once per shipment but i have done some changes the cost is coming to each delivery associated to the shipment.could you please assist.
Reagrds,
Debesh

Hi Debesh,
First of all, check your item category used into VI01. E.g. if you go to T_56 trx. check
how it is defined it. e.g. 0002 item linked to shipment type 0001 -> the origin of this item is "shipment header"
(rec. indicator) this setting characterizes the reference to which a shipment costs item refers.
Besides, as my colleagues told, condition type (t_06) and calculation basis defines how costs are based on..
regards,
david
Please refrain from begging for points, it is against forum rules
Edited by: Csaba Szommer on Apr 8, 2011 1:14 PM
Edited by: David Ruiz on Apr 12, 2011 1:40 PM

Regarding Storage Cost Indicators

Hello PP Sapperu2019s,
Can any one guide / brief me with a detailed example about storage cost indicators.
What is storage cost indicator?
Why we need to use the storage cost indicator?
Purpose of maintaining this configuration (OMI4)?
What will be the impact after maintaining this configuration?
What kind of negative impact will be faced after maintaining this configuration?
Requesting you to brief with your valuable points.
Cheers,
Kumar.S

Hi,
Takes costs into account in proportion to the quantity stored and the unit price. It refers to the average stock value.
It is constant for the duration of the stocking-up period. The usual values lie between 15 and 35%.
Use
The storage costs percentage is only used for calculating the lot size for optimizing lot-sizing procedures.
e.g.
If for particular items storage you are incurring any storage costs so by this system you decide what is suitable lot size quantity to optimise the storage costs.
Also check below link:
http://help.sap.com/saphelp_40b/helpdata/fr/7d/c27639454011d182b40000e829fbfe/content.htm
Regards,
Alok Tiwari
Edited by: Alok Kumar Tiwari on Feb 29, 2012 3:28 PM

How many mails i can send at a time per day using APEX mail system?

HI,
I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
can any one help me to know How many mails i can send at a time per day using APEX mail system?
Thanks in advance
Gowthami

Hi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM

Indicator: Storage costs per day

Similar Messages

Maybe you are looking for