Indirect evaluation, 2 change the default amount against a wagetype in IT8

Hi Experts,
After providing the paysccale str in IT0008 the default wagetype for stipend is coming along with its amount (in change mode ) but when i am chnaging the amount and trying to save it the amount regains that default value. My requirement is I should be able to change the default amount comimg and then save it.
How it is possible.
Regards,
Tomesh

Hi,
Go to table V_T511 for the wagetype. Tick the Rewritable field. This will allow your INVAL to be chnages in IT0008
Regards,
Devojit

Similar Messages

How to ... change the default for "patch name" when doing the assemlby?

Hi all,
how to change the default settings for the "patch name" in the assembly step?
By default the name will be set to <trackID>.<timestamp> and I would like to have something else ...
Best regards
and thanks for any help
Michael

I don't think you can - there's nothing in the documentation indicating how you can change the default. I wouldn't be surprised if there was a configuration file somewhere that contained an assembly name template, but altering it (assuming it exists) would certainly be at your own risk.
You could always open an OSS note against BC-CTS-CMS and ask.

How may I change the format to enter new contacts? I need to add a business name and would like to change the defaults to work rather than home.

I am entering new contacts into the contact app. I need to add a business name and would like to change the default for phone numbers from home to work. I am entering a large amount of business cards

rcolbroth wrote:
Is there anyway of creatiing a different name for this Folder rather than 2013?
If you are using one of Lightroom's "date-based" folder templates, then the folders are created in accordance with the image capture date, not the date that you happen to import it. If you specifically want to use the import date for your folder names then you probably don't want to use the Lightroom date template, and instead you'll need to setup your folder names manually.
The vast majority of users that use date-based folder naming schemes will use a standard Lightroom template, i.e. based on the much more meaningful image capture date.

How do I really(!!) change the default ringtone?

I have a ringtone on my IPhone 3GS which appears correctly amongst the other tones. When I click upon it, a check mark appears and the sound plays successfully. It is 29 seconds long. But when my phone rings, a different tone (which is marked 'default') is used for the ring instead of the checked one. That different one is marked 'default'. I had thought that clicking upon the ringtine sets it as the default. How can I change the default so that this tone is used instead of the one marked default. Online web instructions say that clicking ought to be enough to select the ringtone used. When I click upon other tones listed, the 'default' designation does not change to them as well.
Although I do not believe that it is relavant, the following additional information is supplied: Please note that this ringtone was made by me from a downloaded piece of music. Once before, I had made this into a ringtone, and that time successfuly. But I lost it when I inadvertently reset the phone. Since then, ITunes has changed four times, and this time it would not load the ringtone, even though the ITunes itself had made it. That is why I resorted to an external program. (Yes, I did follow the renaming instructions contained in some of them to verify it ended in 'R'.) An external program, IFunBox was used. It found the file, recognized it as a ringtone, and copied it into the IPhone, where it shows up as a ringtone within Settings.
I believe if I could find a way to make it the 'default', the phone would use it..
Thank you

Jon:
Dragging the thumbnails to the desktop and exporting are essentially the same process, producing copies of the full sized image file. Exporting gives you other options, however. Once you get the photos out of iPhoto you can run PhotoInfo on them and then import as new files. iPhoto will see those new files with the correct date. If you try running PhotoInfo on files already in iPhoto, you can change the EXIF Capture Date in the file but iPhoto won't recognize the changes.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

[svn:bz-trunk] 20609: Change the default max object nest level from 1024 to 512.

Revision: 20609
Revision: 20609
Author:   [email protected]
Date:     2011-03-04 10:23:41 -0800 (Fri, 04 Mar 2011)
Log Message:
Change the default max object nest level from 1024 to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Update documentation for the max object nest level setting to reflect the new default.
Add documentation for the new max collection nest level setting.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/trunk/resources/config/services-config.xml

You should be able to get some more precise information from your Xorg logs, but I would bet it is related to the evdev driver. Some of the options in your xorg.conf no longer work with the latest version. For now you should be able to either map your mouse directly to the appropriate /dev/event* entry or change to the standard mouse driver, both of those methods should be in the wiki.
You are supposed to be able to use the evdev driver without the input section of your xorg.conf by using dbus/hal autodetection, but AFAIK at the moment the xorg-server package still isn't compiled with hal support, so you would have to patch and rebuild the package.

Do you change the default RAW conversion settings?

I have used Sony (and formerly used Panasonic MFT) cameras (a900, a850) for two or three years and never had any reason to change the default RAW conversion settings. Five weeks ago I started using Sony's new a77, and for the first time am not satisfied with Aperture's default RAW conversion. (I recalibrated all my monitors -- twice -- thinking that something in my color workflow had got busted.) The default a77 RAW file conversion results in an overly-saturated, "Disneyfied" picture. I have found that by sliding "Boost" almost to zero, and cutting "Hue Boost" by half, I end up with a much more life-like, atmospheric, picture -- and one that closely matches the default rendering of RAW files from the a850 and a900.
1. Do you change the default RAW conversions settings? Why?
2. To what units, specifically, do the scales of these controls refer?
3. It seems that Hue Boost provides a range of settings that corresponds to the print settings "Perceptual" (= zero hue boost) to "Relative Colorimetric" (= full hue boost); does that make sense?
The User Manual, as usual, provides a solid concise explanation of the RAW Fine Tuning Brick.
Any experience you can share is appreciated. Thanks.
(Added:
(It seems conceptually wrong to me to have these controls be part of the RAW converter. Are there other adjustments in Aperture that do the same thing?)
--Kirby.
Message was edited by: Kirby Krieger

William -- many thanks for your help. I will almost certainly change the default for my a77 (as well as for the Nex-7 I used for a week).
Are there is any other adjustments mathematically similar to the "Boost" or "Hue Boost" sliders in the RAW Fine Tuning Brick? I ask for two reasons:
- Mostly I'm just trying to figure out what they do, and strengthen with knowledge my quiver of Aperture effects. According the the User Manual, they change the overall contrast, and the amount to which the hue is changed as the overall contrast is increased.
- In practice, it makes sense to me to have the RAW conversion produce the "flattest", least "effected" image possible -- to leave _aesthetic_ adjustments to me. I don't want to use the RAW Fine Tuning controls as part of my workflow; I want to know how to get the same increase in contrast and control of hues using other adjustments (that, specifically, don't require de-mosaic'ing). Apple seems to indicate that the use of the RAW Fine Tuning controls may be the best approach:
For images that consist of saturated primary and secondary colors, such as an image of flowers in a lush garden, shifting the hues to their true values has a desirable visual effect. However, this is not visually desirable for images containing skin tones.
The implication is spelled out in the sentencesthat follow: use the max setting for flowers, and the minimum setting for portraits. Isn't it odd that this recommendation is left to the RAW converter, and is buried deep in the User Manual?

Can we change the default file format 'BIN' of system to 'ASC' using table

can we change the default file format u2018BINu2019 of system to u2018ASCu2019 using table TSOPE
if possible:will it affect any system performance

Hello Vincent,
BIN(Binary) is default selection.and so we have to select ascii.to make myself more clear my queries is like:
first for setting ascii what we need to enter in text box that is against ASCII.and
secondly if we select ASCII will it affect system performance in anyways.

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

Power view in SharePoint - Changing the default save location?

Is it possible to change the default location when saving Power view back into SharePoint?
Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
When saving their reports, the default location is always the same location where the data source is. This is described here also:
https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
Quote from the link: "The first time you save the
report, the default location will be the folder where the model is located."
Ok, understood. But is it possible to change this???

Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Office 2013 - Is there a way to when installing that you can change the default save location without having to configure it within the client?

So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!

You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do you change the default save as directory when saving a PDF file to your hard drive?

This is the on-line help instructions on this site:
Downloading a PDF file to your hard drive
You can download a PDF file to the hard drive from a web page's link. Downloading PDF files doesn't require the ActiveX plug-in file to be installed. (If you want to open and view the PDF file after downloading it, you must have Acrobat, Adobe Reader, or Acrobat Reader installed.)
To download a PDF file from a link:
1. Right-click the link to a PDF file, and then choose Save Target As from the pop-up menu.
2. In the Save As dialog box, select a location on your hard drive, and then click Save.
My issue: I want to save several pdf files (from the Adobe Reader in my browser) one at a time and each time it defaults the save as directory to the desktop and I have to go looking for the directory I last saved a pdf file in. I got lots of directories and I wish I could change the default setting for the save as directory. Just a minor thing but irritating as other programs usually will allow you to switch the default save as directory to one of your choosing.

There is not a way to set the default location from all the forums i searched in the last couple days.
Russ

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

When I change the default folder to save downloads in the options menu, it later reverts to the default folder even though I have made not changes in options. Any ideas? thanks!

In the Options menu I changed the default download location (folder) to a folder I have on my desktop and saved the changes. But this option reverts to the default folder when I turn on my computer and open FF the next day.

Thank you for your response.
I do use CCleaner and just ran it. It did not change the download option folder that I had changed from the default so it appears that this is not cause.
Any other suggestions would be appreciated. Thanks again!

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

http://support.apple.com/kb/ht5621

How do you change the default font in Illustrator CS5?

I have upgraded my Illustrator to CS5 and my default font has changed to a strange font. In Photoshop and InDesign, I was told that all you have to do is change the font in the Character menu to the font that you wish to be set as "default" and it will be the font that you always start with.
NOTE: Does this mean that if I use a different font in a different document, the font will stay that font unless I change it back? Isn't there a way to make a particular font the font that I would always what I start with? All this setup means, is that the "default font" will always be whatever the last font that was being used was. There has to be a way to make a default font that I will always start with no matter what the last font that was being used was.
Illustrator gives you no option on font type, unless a file is open. Then, if you change the font and close the file, next time you start a file, it will go back to what is was to begin with. There has to be a way to change the default font for all of these programs to where the font always stays the same unless you change it. Mine is just set to use a weird font that I would probably never use.
I just never thought it would be that big of a deal to change default settings for the font.

Okay, I basically made three different documents and I made sure that I had everything chosen in each. I then saved the three to that file and they now appear in the list:
Settings for all 3:
72psi, 150psi and 300psi
Rulers Visable
Times New Roman
12pt
14.4pt
I then went in and started three new documents. I used the three different New Document Profile's that I made and they all had Rulers, their sizes were correct, but the font stayed Myriad Pro. Did I miss anything? And, Yes, I did change the font and the setting before I saved them in the New Document Profile.
One other thing, I did create a file in the folder, but it was spelled incorrectly. I then went into the folder, erased it and made a second. Then, I went to open it in IllustratorCS5 and it was still listed. I went to the file and it wasn't there anymore, but it was still listed in the New Document Profile. Is there a way to get it off of the list or is all I have to do is restart Illustrator?

Indirect evaluation, 2 change the default amount against a wagetype in IT8

Similar Messages

Maybe you are looking for