Individual and Collective Indicator in MRP 4 View and BOM Expl.No

Hi
Please get back to me on the below queries
a) I am using Planning Strategy u2013 40, do we need to maintain Individual or collective Indicator in MRP 4 view?? If I maintain what will be the impact and if I do not what will happen to the dependent requirements.
b) What is BOM Explosion No?? please let me know this functionality and the configuration steps if any..
Thanks

Hi,
u2022Individual requirements
Requirement quantities of the dependent material are stated individually.
u2022Collective requirements
Requirement quantities of the dependent material are grouped together.
BOM Explosion Number:
1) Starting from the MRP menu, choose Master data -> BOM explosion number -> Edit.
The system displays the initial screen for maintaining the BOM explosion number.
2) Choose Execute.
The screen for maintaining the BOM explosion numbers now appears.
3) Choose New entries.
A screen now appears where you can enter new BOM explosion numbers.
Enter data as required.
BOM explosion number - The BOM explosion number is the object for which the following data is maintained. It can be entered alphanumerically.
Fixed key date - The fixed key date determines which bill of material is exploded.
Plant - You can also specify a BOM explosion number for a specific plant. Enter the appropriate plant in this case.
Material - You can specify a BOM explosion number for a specific material. Enter the appropriate material in this case.
Status - You can set the BOM explosion number to active or inactive using the status field. Only active BOM explosion numbers are used in the planning run.
4) Save your entries.
Regards,
Sulabh

Similar Messages

Individual / collective indicator in MRP 4

What is the use of this indicator and when to use individual and colloective option ?

Hi,
If you maintain Individual requirement seeting in MRP 4 view , always a PR or Planned order is generated aginst the WBS element based on Procurement type setting ( E or F). If a PR is genearated, and is converted to PO and when we do GR of the item , for a valuated stock , Stock and price will be in project stock not in actual cost. ( can see report in T-code GR55. Report Z6P2.)
If you maintain collective requirement seeting. Always a reservation is created against the network activity. Once the item is issued against the reservation , cost is debited from the activity and item is consumed. No stock. Cost will booked to actual cost.
Can check the same by testing with same material ....
first have seeting as a Individual requirement. Genrate PR , convert to PO , do GR and check MMBE (stock report) and GR55 cost reprot.
next time same material , change setting to collective requirements, Reservation is created , DO GI against that resevation. Check MMBE ( No stock should be there ) , Check GR55 cost should be booked in actual cost.
No change in costs. Only change in the flow of qnty and cost.
Thanks
Saikishore Ganga
P.S : Kindly confirm as soon as you try this.

What is the functionality of Bom explosion individual/collective in MRP 4 View

Hi Experts.Please give idea about what is the use of functionality of BOM explosion Individual/collective in MRP view 4.How this function will work in strategy 10 and 20.
thanks in advance.

Hi,
This is a very generic question...If you explore in forum or net you will get lot of information...
This is normally used in make to order strategies like 20, 50 etc...
The individual/collective indicator in the material master record determines
whether a component is procured for a special customer requirement in the
individual segment.
The indicator "1" for individual requirements means that the material is being
specially manufactured or procured for a sales order. A special individual segment
is created for each requirement. An individual requirement is only created if the
higher-level material does not create a collective requirement.
The indicator "2" for collective requirements means that the material is produced
or procured for various requirements. You can find these requirements in the net
requirements segment.
The indicator "blank" means that the component is to be planned in the same way
as the higher-level assembly.
In the above example, two individual segments are created for the shaft for sales
orders A and B.
Thanks
Kumar

MRP4 View: Significance of Individual/Collective indicator

Hi,
Ref : MRP 4 view , Field : "Individual/Coll."
Request to give the significance of the above field.
I am not able to understand the help data available for the filed in SAP.
If possible request to give example to elaborate the significance
Regards
Nitin

Hi,
This indicator is useful in case of sales order planning.
If u enter 2, in collective/individual for component, then in component stock requirement list u can see there is no reference to sales order.
That is commom stock will be consider by system.
If u enter indicator 1 or no entry, in MTO after creation of sales order, for component sales order stock will be created. U can see the sales order in component stock requirement list. The common stock of component will not consider the common stock. Pr will be generated for the component/ For this situation u have to transfer common stock material to sales order stock.It depends of the requirement of company. Where to check common stock or sales order stock.
Check the above & reward if found suitable.
Regards,
Suhas

Individual Collective indicator

Hi
Is there any report abt Individual collective indicator
I need a report regarding the requirements created on each date for the collective requirement of the material
I have maintained collective indicator for the material
Regards
Anand Srinivasan

Dear Anand,
There's no standard report regarding the individual/Collective Requirements.
But still if you want the list of materials with 1 - Individual Requirements only or 2 - Collective Requirements
only,you can get it from the table MARC in T code SE16.
Regarding your second part of question i'm sure whether you are l;ooking for this,
If you want the total Requirements for those materials,then go to T code MD73 - give the Requirements
Plan as * and enter the plant and the date range and proceed.
Regards
Mangalraj.S

MRP 4 View

Hi All
In MRP-4 View I am seeing the Individual/Collective Indicator.
What it does?
If I select 1 [Individual Requirements] what is the impact in PP?
If I select 2 [Collective Requirements] What is the impact?
If I select '' '' [Individual/collective Requirements] What is the impact?
please help me to know the logic behind this.
Thanks in Advance.

Individual requirements
Requirement quantities of the dependent material are stated individually.
Collective requirements
Requirement quantities of the dependent material are grouped together.
Ex:
A assembly contains A1 & A2 components.
B assembly contains A1 & A3 components
If 1 indicator is used in A & B then dependent requirements will be as under:
Req 1 for A1
Req 2 for A2
Req 3 for A1
Req 4 for A3
If 2 indicator is used then in A & B then dependent requirement will be as under:
Req 1 for A1 (total required qty will be merged in one)
Req 2 for A2
Req 3 for A3

Input values not saved in MRP 2 view

Hi Gurus,
we have a new new Z field called "Vendor material class" created in "MRP 2 view" as per the customer requirement . we maintained the values all the values via a Z transation code. but when you want to save a value for this filed in MM02 it is not getting saved and a message " No changes made" in our Production system.
but where are in our test box we were able to save the values. the program versions are same in both the systems. let me know if i am missing any congigurations for this field which saves the value in Production system.
appreciate your help on this.
Thanks,
Nagesh.

Hi Nagesh,
I think you may check the SAP note:
44410 Integrating cust.-specific fields in matl master
to see if you have done all the pre-requisition to correctly integrate your own fields in material master, then you may compare this between your test system and production system to see if you missed anything.
Regards,
Rachel

List display based on PR collective indicator.

Hi all
I am able to use the function "PR collective indicator" in project definition for grouping the items in respective PR.
I have defined the grouping like MECH and ELEC.
Is there any display of PR's to have selection by this value MECH or ELEC for the respective project?
Can we have list display like ME5J to have selection based on this grouping?
warm regards
ramSiva

hello Zaafran Ahmed ,
I populate the list items as in your example..I populate the list items as follows,
My Code is :
/* WHEN-NEW-FORM-INSTANCE Trigger*/
DECLARE
rg_countries RECORDGROUP;
vTemp NUMBER;
BEGIN
rg_countries:=CREATE_GROUP_FROM_QUERY('rg_countries',
'SELECT country_name NAME, COUNTRY_ID VALUE FROM COUNTRY ORDER BY 2');
vTemp:=POPULATE_GROUP(rg_countries);
POPULATE_LIST('BLOCK3.COUNTRIES', rg_countries);
END;
In the WHEN-LIST-CHANGED Trigger of the COUNTRIES list item i write as follows :
/* WHEN-LIST-CHANGED Trigger */
DECLARE
rg_states RECORDGROUP;
vTemp NUMBER;
BEGIN
rg_states:=CREATE_GROUP_FROM_QUERY('rg_states',
'SELECT STATE_NAME NAME, COUNTRY_ID VALUE FROM STATE WHERE COUNTRY_ID = '||:BLOCK3.COUNTRIES||'ORDER BY 2');
vTemp:=POPULATE_GROUP(rg_states);
POPULATE_LIST('BLOCK3.STATES', rg_states);
DELETE_GROUP(rg_states);
END;
My problem is now, When i select a country in "COUNTRIES" list item [ For example I select India], The "STATES" list item shows all the states belongs to india..But i cant select states from that..Only the first value in "STATES" list item
can be selected..Other values can't be select by me..What can i do..
My table structures:
SQL> desc country
Name Null? Type
COUNTRY_ID NOT NULL VARCHAR2(30) [This is primary key]
COUNTRY_NAME VARCHAR2(30)
SQL> desc state
Name Null? Type
COUNTRY_ID VARCHAR2(30) [This is foreign key ]
STATE_NAME VARCHAR2(30)
My example datas:
SQL> select*from country
2 /
COUNTRY_ID COUNTRY_NAME
002 usa
001 india
select*from state
COUNTRY_ID STATE_NAME
001 tn
001 kerala
001 bangalore
002 ca
002 NY
002 la

P.O - DIFF. BETWEEN INDIVIDUAL RELEASE & COLLECTIVE RELEASE

Dear All ,
Kindly explain the difference individual release & collective release , as i m using ME29N to release here this P.O is to be released by 3 persons - execut. Mgr & G.M , what is scenario in Collective rel procedure
sap11

Hi
It is not possible to release all POs in one time through ME28.
Through by this Tcode you can view list of all unreleased POs under one released code then one by one you can release all POs.
In SAP, there is not any provision to release all POs in one time.
Vishal...

Verifying understanding on Strategy group (MRP 3 View)

Hello Forum,
As per my understanding, if we don't have any independent requirement or customer order for semi-finished or packaging products then there is no need to maintain any Strategy group (MRP 3 View) field @ material master .
Am I correct or you foresee any reason to maintain it ?
Cheers
Sam

Dear Sam Das,
For semi finished material if you leave the strategy group than it is ok if you do not run mrp. In case of mrp run and your semi finished product have different requirement than make to stock scenario than in that case it is necessary. If you leave it blank and run mrp system will consider it as 10.
Regards,
Saurabh Kumar

Individual shipment & Collective shipment

Hi Friends,
In simple terms, what is difference between an Individual shipment & Collective shipment.
Thank you

Dear Jamie
In following functions are available:
·   Creating Individual Shipments
·   Changing Individual Shipments
·   Displaying Individual Shipments
Using these transportation planning functions you can:
·   Manually enter information on shipment header fields
·   Manually select deliveries
·   Include deliveries in a shipment
·   Get the system to propose the tour data (vehicle, trailer, driver, passenger) from the tour master by entering a route and sequence number in the shipment header.
is the function lets you create shipments automatically in the system (either in the foreground or background). You can define simple rules as to how deliveries are to be grouped into shipments.
Collective processing normally entails three steps:
- Definition of selection variants
Define which deliveries are to be considered in the creation process. The same selection criteria as those in the individual creation process can be used here.
- Definition of grouping criteria
You can define which fields in the deliveries must be identical so that those deliveries can be grouped together into one shipment. You can also define in which order the deliveries appear in the shipment and enter capacity limits for those shipments that are to be considered. To define grouping and sort criteria, you can choose from over 80 delivery header fields in the field catalog.
- Set default shipment data
You can define shipment data, such as forwarding agents or deadlines, that should appear in each shipment you create.
thanks
G. Lakshmipathi

HT4314 I have 4 iPads and one apple Id. Two the devices record clash of clans and dragonvale individually and the other two are tied to the other two. Drives my kids nuts. How do I fix this?

I have 4 iPads and one apple Id. Two the devices record clash of clans and dragonvale individually and the other two are tied to the other two. Drives my kids nuts. How do I fix this?

Also, I'd prefer to keep the same ID on both so I will keep access to my calendar/contacts/etc on both devices. Would I be able to share reminders and voice memos and the like as well? And how often would they update each other? If I edit a contact on the 5, and the 4 is in wifi, assuming they're both on my same ID, will the contact update on the 4?

I'm attempting to sync several albums from itunes to iphoto. When select to sync all albums it copies over the previous recorded album. I tried to sync the Albums individually and the same thing happens. Any ideas on how to sync my albums?

I'm attempting to sync several albums from itunes to iphoto. When select to sync all albums it copies over the previous recorded album. I tried to sync the Albums individually and the same thing happens. Any ideas on how to sync my albums?

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

MRP 2 view - service level field

Hello colleagues.
Can anybody explain me what's the usage of the field "service level (%)" in the MRP 2 view of the material master ?
The SAP help does not help that much ...
Regards,
Fernando

Dear,
In MRP2 view thers is field service level % where you can define the percentage of present stock will be in safety stock.
hope it will works for u
Service level
Percentage specifying what proportion of the requirement is to be covered by the warehouse stock.
Use
The system uses the service level to calculate the safety stock.
The higher the service level, the higher will be the safety stock calculated by the system to compensate for additional consumption or delays in delivery.
Regards,
Alok Tiwari

Is it possible to render the clips individually and relink- such as with Color/fcp?

I'm fairly new to Ae/ PP, and am trying to figure out a good workflow for grading (using resolve lite) Basically, I need to denoise my footage first (neat video) and then send that footage to Resolve, then back to pp. Now, this works fine with Resolve's scene detector as it can cut up the footage, but if there are any dissolves, etc, then I need to do this via xml instead.
What I would like to do is: Edit in PP. Send to AE to denoise, render (the denoise need to happen before grading) and replace the original files with the new denoised clips in pp. Then send the xml to Resolve. So far this would work if it wasn't for AE rendering everything into one clip, eliminating the cuts/layers.
Is it possible to render the clips individually and relink- such as with Color/fcp? If not, any other workflow that could work for me?
Hope someone can help- dynamic link is driving me up the wall.

Simply use Dynamic Link to send your whole timeline to AE or use AE's Premiere project import. Then once you have a working AE project, you can use scripts like rdPreCompose to create separate sub-comps for each clip which in turn you then can render separately. Still, the limitation will always be the kind of transitions you use. Essentialyl you should avoid anything that isn't a hard cut or simple cross dissolve 'cos there's no way to recreate it in AE without eating up the handle of your footage. You'd essentialyl be shooting yourself in teh foot if you jump ahead too far in Premiere and already add too much finishing there.
Mylenium

Individual and Collective Indicator in MRP 4 View and BOM Expl.No

Similar Messages

Maybe you are looking for