Individual cell data buttons for each app keep turning on by themselves?

I have a 4S iPhone, OS 7.0.6, and my problem is that the individual cell data buttons for each app keep turning on by themselves. I'll go in and turn them all off and the next time I look (whether in 5 min or 5 hrs) they are all turned back on again? I want to leave my cell data on so that I receive my iMessages but usually don't want everything else turned on until I get to a wifi zone. I used to be able to keep them all off until I did the last couple iOS updates. Help!

Hey there Tylyssanna,
It sounds like your cellular data options are not saving correctly. I recommend starting by turning off Cellular Data in Settings first. Then close all the running apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone, turn it back on, and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Cheers,
Sterling

Similar Messages

Why can't I get the text labels for each app to go away? I only see 9 app buttons now; used to see 30 or 40

Text labels started showing up next to my app buttons going across toolbar. Because the names are fairly long (I don't need them per se); I can now only see about 10 buttons. I made sure the the box in the toolbar preferences menu which says "show text labels for each app." was unchecked. I even tried checking it, then unchecking it.
I can't get the labels to go away. I used to be able to see and therefore USE EASILY about 30 -40 app buttons. I just downloaded the latest update to firefox 8.

I am having something similar going on and can't sort out what it is doing:
ldiffs:
dn: automountMapName=auto_master,dc=example,dc=edu
objectClass: top
objectClass: automountMap
automountMapName: auto_master
dn: automountKey=/foo,automountMapName=auto_master,ou=Mounts,dc=soe,dc=ucsc,
dc=edu
objectClass: automount
automountKey: /foo
automountInformation: auto.foo,dc=example,dc=edu -rw,resvport,
hard,intr,nosuid,tcp
Second one:
dn: automountMapName=auto.foo,dc=example,dc=edu
objectClass: top
objectClass: automountMap
automountMapName: auto.foo
dn: automountKey=tstaff,automountMapName=auto.foo,dc=example,dc=edu
objectClass: top
objectClass: automount
automountInformation: fileserver:/export/foo/tstaff
automountKey: tstaff
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 name=tstaff[] map=auto.foo,dc=example,dc=edu opts=rw,resvport,hard,intr,nosuid,tcp path=/foo direct=0
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 getmapent_ds called
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 getmapent_ds: key=[ tstaff ]
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 ds_match called
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 ds_match: key =[ tstaff ]
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 ds_match: Searching for tstaff,automountMapName=auto.foo,dc=example,dc=edu
9/25/09 11:45:25 AM automountd[1101] ds_search failed
exiting ...
It seems like it can't find the trigger point tstaff. It is looking for:
ds_match: Searching for tstaff,automountMapName=auto.foo,dc=example,dc=edu
which isn't what the DN is in ldap:
Distinguished Name: automountKey=tstaff,automountMapName=auto.foo,dc=example,dc=edu
any thoughts?
regards,
Derek

Cellular data only for specific apps

Is there a way by which i can enable cellular data only for specific apps? Lets suppose i want only mail and viber to run on cellular. So how do i enable cellular network only for viber and mail

Hello all,
I have been using the iPhone 4S for about a year and I never had problems untill a few days back. Since about a week, my 3G settings for applications installed automatically reset.
Path >> iPhone screen >> Settings >> Mobile(Cellular) >> Use Mobile Data For >> "List of all apps installed"
Against each application, you have an option to either enable / disable the mobile data usage:
Eg:
App Store          (swipe left to disable || swipe right to enable)
Contacts          (swipe left to disable || swipe right to enable)
Facebook          (swipe left to disable || swipe right to enable)
Facetime          (swipe left to disable || swipe right to enable)
Weather          (swipe left to disable || swipe right to enable)
You Tube          (swipe left to disable || swipe right to enable)
etc...
Problem:
If I don't want You Tube to use mobile data, I would normally swipe left to disable thus the application will not start / stream any music if its on 3G/4G. Since a few days, whenever I disable the option for any app... go back to the main screen and recheck the settings, I see its enabled again!
The error I see when I start the app is:
MOBILE DATA IS TURNED OFF FOR "YOU TUBE"
You can turn on mobile data for this app in settings
<Settings>     <OK>
When I go back to settings... I see the option is enabled.
Now I dont know what and how this happened all of a sudden. I have tried resetting the network settings for my iPhone, and it has not helped me.
My iPhone is updated to OS 7.0.4 and all apps are updated.
Anyone can help me on this error and how do I fix this?
FYI... I have no problems connecting to WiFi at all!

When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... please help

When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... than I have to wait 2 - 3 minutes and call again.
please help

Has nothing to do with the SIM or master reset. This has been done to my phone. The SIM once and the factory reset many times over. You all just sold us a bad piece of equipment and have us by the tail with our contracts so none of us can get a new phone without paying full price or re-upping our contract. I just got off the phone last night with your high up tech people (you know, the hidden number we get once we tear into your support people enough), they went into my phone again and still didn't find anything wrong. I about got fired from my job for not getting my calls and texts. The BBB has now been contacted, and I feel your end should shore this up for all of us!

How to create buttons for each slide in slideshow

I currently have a slideshow working with prev and next buttons,
but would like to add numbered buttons for each slide at bottom of images,
with a static number for the active slide that has a colored circle around that number.
I can create static number with colored circle in Photoshop and add that to a layer,
but it's labor intensive to do that for all numbers.
Is there a better way to create the highlighted numbers for active slide?
For numbered buttons that link to non-active slides, I can create numbers in Photoshop and import images into Flash,
then convert to symbols and assign actions for them,
But that too is labor intensive to do for all the numbers.
Is there a better way to create numbered buttons for non-active slides?
I'd also like to have a hover function on the numbered buttons,
that changes from plain image of number to number with colored circle like I want to use for active slide.
How do I assign a hover function to button symbol, that will load another image or symbol?

Try to think in terms of having reusable symbols. Think it thru before you try it.
Use a movieclip symbol instead of a button. Have a dynamic textfield in that movieclip for the number, and set the textfield to not be selectable. Have one frame of this movieclip where it displays as the highlighted (selected) one and have the movieclip go there where you are on that slide.
Use the textfield for the number--assign it dynamically so that you don't have to import an image for it. Use as many of these movieclips as you need to for all your buttons.
Have functions that reset all the buttons at once so that when you move to a new slide, the previously selected one goes back to mormal... follow that with setting the newly selected one to be in its "selected" frame.

How to take a single data point for each trigger pulse ( synchronous acquisition).

hi
          im using the pci-mio-16E1 card, with the IDE VC++, so im looking for an example to explicate me how to make an synchronous acquisition data using an external timing, so the idea is to acquire (take) a single data point for each trigger pulse from one input channel ,and saving the data in a file .
now im making a code using the AI_setup and DAQ_op functions, im getting a speed acquisition (it is the start of acquisition data), and it is a synchronous acquisition just for one trigger pulse, and me i looking for an acquisition for each trigger pulse.
so to  understand my problem you can see my code :
iStatus = Timeout_Config(iDevice, lTimeout);
         iRetVal = NIDAQErrorHandler(iStatus, "Timeout_Config", iIgnoreWarning);
   // configuration and selection of signal trigger
         iStatus = Configure_HW_Analog_Trigger(iDevice, ND_ON, iLowValue,iHighValue, ND_ABOVE_HIGH_LEVEL, ND_THE_AI_CHANNEL);
        iRetVal = NIDAQErrorHandler(iStatus, "Configure_HW_Analog_Trigger", iIgnoreWarning);
iStatus = Select_Signal(iDevice, ND_IN_CONVERT, ND_PFI_2,ND_HIGH_TO_LOW);
         iRetVal = NIDAQErrorHandler(iStatus, "Select_Signal", iIgnoreWarning);
    iStatus = AI_Setup(iDevice, iChannel, iGain);
   iRetVal = NIDAQErrorHandler(iStatus, "AI_Setup", iIgnoreWarning);
   while ((iReadingAvail != 1) && (iStatus == 0)) {
/* Wait until reading is available. */
         iStatus = AI_Check(iDevice, &iReadingAvail, &iReading);
        iRetVal = NIDAQYield(iYieldON);
       // Acquire data from a single channel
    iStatus = DAQ_Op (iDevice, iChannel, iGain, piBuffer, ulCount, dSampRate);
   while ((iDAQstopped != 1) && (iStatus == 0)) {
        iStatus = DAQ_Check(iDevice, &iDAQstopped, &ulRetrieved);
        iRetVal = NIDAQYield(iYieldON);
       iStatus = DAQ_VScale(iDevice, iChannel, iGain, dGainAdjust, dOffset,ulCount, piBuffer, pdVoltBuffer);
      iRetVal = NIDAQErrorHandler(iStatus, "DAQ_VScale",iIgnoreWarning);
   /* Set analog trigger mode back to initial state. */
       iStatus = Configure_HW_Analog_Trigger(iDevice, ND_OFF, iLowValue,iHighValue, ND_ABOVE_HIGH_LEVEL, ND_THE_AI_CHANNEL);
/* Set PFI line back to initial state. */
       iStatus = Select_Signal(iDevice, ND_IN_START_TRIGGER,ND_AUTOMATIC, ND_DONT_CARE);
          iStatus = DAQ_Clear(iDevice);
/* Plot acquired data */
      iRetVal = NIDAQPlotWaveform(pdVoltBuffer,ulCount, WFM_DATA_F64);
so this is the data acquired -0.900879,-0.900879,-0.900879,-0.900879,-0.900879,-0.900879,-0.900879,-0.900879 and i think that is a noise because all time i get this data.
tank you very mutch fo your help

Hello,
Please see the responses to this thread at the following post.
http://forums.ni.com/ni/board/message?board.id=250&message.id=13686
Also, please only post one thread per issue.
Regards,
Sean C.

I still have ilife '09. How can i update to the new ilife? Do i have to pay for each app seperately in order to update?

I still have ilife '09. How can i update to the new ilife? Do i have to pay for each app seperately in order to update?
I am an Aperture user and I am tired of managing my old iphoto library seperately. In order to use the new combined aperture/iphoto abilities i need a newer version of iphoto. Apple says that the new iphoto is free, however my iphoto (version 8.1.2) did not update. How do i update iphoto so that i can use the library with Aperture?

iPhoto, iMovie and Garageband are free. However, you must be running Mavericks in order to download and use them. Mavericks is free also. Therefore your Mac must be capable of running Mavericks:
The following is from: Apple - Upgrade your Mac to OS X Mavericks.
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
iWork is not as it's an upgrade and not an update. Upgrades for iWork have always had to be purchased. However, the previous iWork apps will work fine with Mavericks.
OT

Using Firefox 26. How do I get a close button for each tab at the top of the screen?

Some time ago, I had a close tab button for each tab on the top of the screen. I want that back. I have no additional add ons and the close tab is set to 1. Changing it to 2 does nothing.

Do you have installed this extension?
*Firefox/Tools > Add-ons > Extensions
If you do not have the extension and also have no need for the feature that it provides then you can ignore this.
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
You can use one of these to start Firefox in <u>Safe Mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I currently have 2 Apps for each App. ie: Photoshop CC and Photoshop CC (2014). How can I delete the Older versions from my List ?

I currently have 2 Apps for each App. ie: Photoshop CC and Photoshop CC (2014). How can I delete the Older versions from my List ?

CC 2014 uses NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

I'm using a 16GB iPhone 4s, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out a

I'm using a 16GB iPhone 4S, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out and come back in, all the native apps I turned cellular off for are back on again. Kindly help me

Exact same question as ankit1986, specifically with the photos while on cellular-only, and as simple as it sounds, I tried the hard reboot Ingo2711 suggested. Still experiencing the same error with the native apps reverting to on. It's killing our shared data-plan (2GB).

When I tap on Top 25 button for the app store I get a window that says "to many HTTP redirects" it also happens when I tap on the categories button

When I tap on Top 25 button for the app store I get a window that says "to many HTTP redirects" it also happens when I tap on the categories button

Restart your device
Reset All Settings (Settings > General > Reset)
Backup and Restore
Do all of those in order - although I almost guarantee you won't need to perform the last step.
Sounds like your phone is just getting a resource error.

How do I prompt a date parameter for each piece of equipment?

Hi,
I've developed a report that displays all of the invoices, over a selected date range, for each piece of equipment. There are 25 pieces of equipment. At present, when the report is run there is just one date range parameter. I select the date range and get all invoices that are within the date range. However, if I want to ensure the invoice-related data from January 31, 2012 (for example) for Equipment #2 is returned I need to have January 31, 2012 in my date range. However, I wanted the cutoff date fro Equipment #1 to be January 28, 2012. Under the current design the result set for Equipment #1 will include invoice data up to January 31, 2012.
I would like to select a unique date range PER piece of equipment within the same report.
For example:
Equipment #1 - January 1, 2012 to January 28, 2012
Equipment #2 - January 1, 2012 to January 31, 2012
and so on.
Is this possible? Basically, how do I tell the report the data range I want for each piece of equipment?
thx!
Mark

Hi,
I am not sure of how you would be able to filter records using 2 different parameters.
You can get 2 different parameters for Date dynamically with 2 different data sets.
You need to create 2 formula in Business View Manager , data foundation as below:
if {Customer.Country}='Australia' then {Customer.Customer ID}
and
if {Customer.Country}='Brazil' then {Customer.Customer ID}
Here instead of Country you can use your Equipment Field and respective values.
Save the Data Foundation
In Business Element create 2 Business Elements for these above formula.
And Create 2 LOVs for these Business Element above and schedule them.
Now in crystal reports you can create 2 Dynamic Parameter and use the above created LOV respectively.
I am not sure how you would be able to filter and link the parameters to your report.
Hope this may work or give you a thought.
Cheers,
Kiran.

Are there any apps for having seperate volume controls for each app if multiple apps are playing at the same time?

Are there any apps for having seperate volume controls for each app if multiple apps are playing at the same time?

I don't think you can do that the volume is universal, but maybe turn down the volumes in the app settings?

Mobileprovision files for each app?

Do I need to creat new mobileprovision files for each app our company creates?

Yes, you need to create mobileprovision files for each app. The mobileprovision files include information in the App ID that you set up in the Apple iOS Developer Portal. If your app includes push notifications, you also need push certificates (.p12) for each app. But you can use the same .p12 developer and distribution certificates for all your apps.
Here's what my certificate folder structure looks like for my apps:
dev.bringhurst.p12
dist.bringhurst.p12
<DPS Tips folder>
     dev_dpstips.mobileprovision
     dist_dpstips.mobileprovision
     push_dev_dpstips.p12
     push_prod_dpstips.p12
<NW_Scenery folder>
     dev_nws.mobileprovision
     dist_nws.mobileprovision
     push_dev_nws.p12
     push_prod_nws.p12

HT5616 Do I have to have a different password for each app?

Hi, Do I need a seperate password for each app on my iPod Touch?

Try resetting your password
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
Also, unless you created the ID by:
Creating Apple ID without credit card: Apple Support Communities
You need a valid payment method even for free apps.

Individual cell data buttons for each app keep turning on by themselves?

Similar Messages

Maybe you are looking for