Individual fonts not recognized properly when opening a MAC FLA file on PC
I'm getting a missing font warning when opening an FLA file
even though I have all the necessary fonts. The problem is that
while I have MyriadPro-Bold, MyriadPro-BoldIt, MyriadPro-Semibold
on my machine, they only show up in Flash as the Typeface names of
Myriad Pro (first two), and Myriad Pro Light (last one).
I don't want to have to go through an entire file and apply
bold and italics to anywhere they exist, so I'm hoping there is a
way to map these properly. Adobe Type Manager shows all these fonts
properly when I open it, so I don't understand why Adobe's version
of Flash can only see the font family and not the individual fonts.
Hopefully someone out there has had the same problem and can
help me figure this out.
I know this thread is a bit old, but I wanted to share my experience and solution in case anyone else runs into this.
The other day, I spent many hours editing some photos for a client. I saved them all and closed Photoshop. When I tried to open the .PSDs, they all came up with this "Not a valid Photoshop document" error. I was freaking out. I could see the thunmbnails and previews with the MacOS Finder and could see the images just fine in Lightroom, but couldn't open them in Photoshop CC.
Finally, I remembered that these were NOT supposed to be .psd files! They were supposed to be TIFFs. What happened was, when I edited them from within Lightroom into Photoshop, they opened as TIFFs. However, when I did "save as", I wanted to name them similarly to some other files I had. I clicked on one of the existing files to copy the file name in the Save As dialog to make it easier to name the new file I was saving, but I didn't realize it was changing the file extention from ".tif" to ".psd" as well. The older MacOS (version 9 and earlier) didn't rely on file extensions fo identifying file types, so it didn't hit me right away that this would be the problem. When I changed the incorrect .psd file extension to .tiff, the files opened in Photoshop just fine.
SO... if you run into this "Not a valid Photoshop document" error, try figuring out if it's actually another file type (.jpg, .tif, .png, etc) by either getting the file info from another program or just experimenting with different file extensions. Chances are good that your file isn't actually corrupt, but just named improperly!
Similar Messages
-
Fonts are not showing properly when opened through mail?
When sending a PDF via email the Frutiger font does not appear properly on an iPad or iPhone. When viewed on an iPhone all the text appears as gradient boxes and when viewing on an iPad font becomes too light to be legible. Is this a problem with the font in the iOS platform? I also tried opening the file in iBooks and got the same outcome.
Does disabling hardware acceleration have a positive effect or is it still happening?
https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration -
I have a site collection which I am moving from a SharePoint 2013 enterprise server to a SharePoint 2013 foundation server. This all seems fine apart from when I try and access the Site columns page (from Site settings) or when I save a Site as a template
- both times I get the error: Field type TaxonomyFieldTypeMulti is not installed properly
If I look in the SharePoint logs I get the following:
Unable to locate the xml-definition for FieldName with FieldId '249a1c1a-5a3e-4173-abad-779b01892510
Any ideas?
Many Thanks,
JennyI have re-done the migration from Enterprise to Foundation and now get the following error:
Field type RatingCount is not installed properly. Go to the list settings page to delete this field.
However I cannot go to the Site columns page as I get this error so don't see where I can delete this from? Previously I had to delete this field manually from each of the Blog sites but this time there don't
appear to be these fields to delete - I presume because I disabled all the features relating to this premigration?
Any ideas?
Many thanks in advance,
Jenny -
Flash CS5 Crashing when opening a specific .fla file
I just upgraded from Flash Professional CS4 to CS5. Everything seemed to be working fine. After upgrading, I started working on a project I had been creating in CS4 on the new CS5. The file opened originally and I worked on it in the new CS5. My swf works and the video plays. All of the external swf files I load in to the Index swf work great. They were created in the new CS5. I can open the external swf, .fla files without any problem. But when I open the one Index file that was created in CS4, Flash CS5 crashes saying there was an unexpected error. I have uninstalled and installed flash several times. I have tried deleting the com.adobe.flash.plist file and restarting. Nothing has worked. I am really afraid I'm going to lose this file and all the work put in to it. Can anyone help me with some ideas to troubleshoot this? Any help would be greatly appreciated. Thanks.
You're still using 12.0.0, and the current version is 12.0.2.
That looks like a font related crash fixed a while back. -
Document not showing properly when opening in Acrobat 9 Pro
When I create a document in InDesign and export it as a PDF, I want to see what it looks like as the PDF. One of the documents that I opened does not look as it should. It only has the photo on the ad but is missing the red background and the words on the ad. As a thumbnail, it looks correct. But, it is not showing up correctly when I open it in Acrobat. Some of the other ads are fine but this one in particular is not showing me all the elements. What do I do to fix this?
Yes, I have the most current version of AA9. I exported the document from InDesign using the PDF exporter. That is what I have used for years and it has worked fine. I just installed CS4 yesterday.
I think I realized what the problem is but I don't know how to fix it properly. I actually went back to the preferences in AA9 to the document color options in accessibility and changed it back to its original state (which, I believe, is where nothing is checked). I had originally changed it because I was trying to experiment with the background of the program. It's black and when I open a PDF, I can't see the black border. But I mistakenly changed the document color. Which brings me to the question of: how do you change the background color of the page so that I can see the black border on the document? I sell advertising so I need to be sure that when people send me their ads, they have black borders. And I can't tell when it has the background behind the document so dark. Acrobat Reader has a white background.
Additionally, can I still install the latest Acrobat Reader and use that instead of AA9 if I want to? It seems easier. -
When opening flash cs4 fla file it crashes flash cs4 and asks to reopen
Application Basics
Name
Firefox
Version
4.0
User Agent
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:2.0) Gecko/20100101 Firefox/4.0
Profile Directory
Show in Finder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Cooliris
1.12.0.36605
false
[email protected]
Adblock Plus
1.3.5
false
{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.history_expire_days.mirror
180
browser.places.importBookmarksHTML
false
browser.places.importDefaults
false
browser.places.leftPaneFolderId
-1
browser.places.migratePostDataAnnotations
false
browser.places.smartBookmarksVersion
2
browser.places.updateRecentTagsUri
false
browser.startup.homepage
http://www.msn.com/
browser.startup.homepage_override.buildID
20110318052756
browser.startup.homepage_override.mstone
rv:2.0
browser.tabs.loadInBackground
false
browser.tabs.warnOnClose
false
extensions.lastAppVersion
4.0
font.name.serif.x-western
Verdana
font.size.variable.x-western
12
network.cookie.prefsMigrated
true
network.protocol-handler.warn-external.itms
false
places.database.lastMaintenance
1301522435
places.history.expiration.transient_current_max_pages
193273
places.last_vacuum
1296178490
print.macosx.pagesetup-2
PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz4KPCFET0NUWVBFIHBsaXN0IFBVQkxJQyAiLS8vQXBwbGUvL0RURCBQTElTVCAxLjAvL0VO…
print.print_bgcolor
true
print.print_bgimages
true
print.print_command
print.print_downloadfonts
false
print.print_evenpages
true
print.print_footerleft
print.print_footerright
print.print_headerleft
print.print_headerright
print.print_in_color
true
print.print_margin_bottom
0.5
print.print_margin_left
0.5
print.print_margin_right
0.5
print.print_margin_top
0.5
print.print_oddpages
true
print.print_orientation
0
print.print_page_delay
50
print.print_pagedelay
500
print.print_paper_data
0
print.print_paper_height
11.00
print.print_paper_size
0
print.print_paper_size_type
1
print.print_paper_size_unit
0
print.print_paper_width
8.50
print.print_printer
print.print_reversed
false
print.print_scaling
1.00
print.print_shrink_to_fit
true
print.print_to_file
false
print.print_unwriteable_margin_bottom
56
print.print_unwriteable_margin_left
25
print.print_unwriteable_margin_right
25
print.print_unwriteable_margin_top
25
privacy.sanitize.migrateFx3Prefs
true
security.disable_button.openCertManager
false
security.disable_button.openDeviceManager
false
security.warn_viewing_mixed
false
Graphics
Adapter Description
0x22400,0x20400
Vendor ID
0000
Device ID
0000
Adapter RAM
Adapter Drivers
Driver Version
Driver Date
Direct2D Enabled
false
DirectWrite Enabled
false
WebGL Renderer
NVIDIA Corporation -- NVIDIA GeForce 7300 GT OpenGL Engine -- 2.1 NVIDIA-1.6.26
GPU Accelerated Windows
0/2I have a similar issue. I have the CS4 Design Premium with all updates on an iMac running 10.6. All Adobe apps work except for Flash 10.0.2.566. All apps worked perfectly under 10.5. Within seconds of loading a file or clicking 'New' Flash terminates generating an Apple crash report (see exerpt below) - not an Adobe crash report.
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000004
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
(BTW, sometimes a normal Quit is interpreted as a crash by the other CS4 apps. Could this be related?) -
How do I open a mac .fla file in a pc version of Flash?
I have files from a class that I took in 2D animation. There are things that I wanted to fix and finish, but the computers that we did the assignments on were macs. I no longer have access to a mac and my computer at home is a pc but whenever I go to open the file, a pop up tells me that its an unexpected file and will not open. Is there anything I can do? Please help.
Flash CS3 (also know as Flash 9) came out in 2007. So if your class was in the last couple of years you probably used a newer version of Flash to create the file.
I might be possible to find someone who still has CS3 (assuming that was the version) and they could open the file and save it to Flash 8. Flash can save to one version prior to the current version. Flash 10 saves to 9, and 9 saves to 8 and so on. Of course that is assuming that what you made didn't use some feature that was only available in newer versions of Flash. -
PDF file is not created properly when I choose File- Print...- PDF-- Save as PDF
PDF file is not created properly when I choose File->Print...In dialogue box if i select option Save as PDF under PDF button...But it works fine with Safari Browser..
== This happened ==
Every time Firefox opened
== alwaysMy first thought is to make sure the fonts used are common. If there is a substitution, things will be off.
-
Music does not sync properly when updated to latest version. Can see on computer but can't play from ipod.
Hope this helps...
I was having the same problem where only 1.7GB of 10GB of selected music would sync so I decided to start fresh. The following steps worked for me:
1. Open itunes and connect iphone 5 if not already. Uncheck all playlists, artists, etc. till nothing is checked to sync. Then uncheck the sync music box so that all music will be removed from the phone. Sync iphone
2. Eject device. Quit itunes (don't just close). unplug iphone.
3. Restart imac, macbook, or PC.
4. Restart iphone.
5. Now after power up, restart itunes then plug in iphone, check sync music and select music to sync. Sync iphone
6. It worked for me!!! Good luck. -
When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?
iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help
If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.
-
my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges
yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute -
Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help
Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks. -
i am getting error "Office for Mac has determined that your product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error and was working perfectly fine with my sheet.
Could be some Disk Corruption, but...
http://support.microsoft.com/kb/969064 -
Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You
Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!
Maybe you are looking for
-
Querying up AR Customer OA page in read-only mode for a Single Customer
We are building a Custom Form in which associated Customer <defined in AR> would be queried up. Now we want to give an option to the User to view the complete details of the Customer. We would be giving a menu option in Tools 'View Customer' thru whi
-
I have a need to view the entire tag text that will be read aloud to screen readers. If I look at the tag panel, for instance at a P tag, there it will contains something like "This is some sample text that..." I want to see all the text, not just
-
Oracle 11g R1 Installation hangs at Cloning Database .
When I installing Oracle 11g R1 on RHEL 5.4, the installation hangs in Cloning Database step. I have stopped the installation and then executed the scripts mentioned during installation : "Run below as root user /opt1/Oracle/OracleDB/oraInventory/ora
-
Authorization for the menu transactions
Hi, Where can I setting fot the user to use transactions for the several menu types. For example: S002 for administration, MB00, CS00, HUM, HUM_CHANGE, HUM_MD, LE_INB, LE_IS, LE_MASTER, LE_OUTB, LE01, LES, LLVS, LO01, MC00, MCC1, MCC2, MCE0, MCE9, MC
-
Imovie Crashes when copying project/event to external
If I try and copy the project/ and event from within Imovie, Imovie crashes. If I copy them separately to external, it works. I'd like to do it together, as this way is too slow! This only happens on some projects, other copy without a hitch. I will