Indstalling new SSD in my MBP mid 2010

Hi All,
Recently I have planned to install new 500gb SSD in my MacBook Pro Mid 2010.
I already have time-Machine Backup taken in a separate Hard-drive before I go for new SSD installation.
My question is, how would I be able to re-install ios YOSEMITE back into my new SSD.
Or I may be wrong here as I already have time machine back-up, would that backup already restore my new os Yosemite? or I will need to download it again from App store?

Similar Messages

HT204032 Why is Powernap not available for other MB's such as the MBP mid 2010 model for example?

Why is Powernap not available for other MB's such as the MBP mid 2010 model for example?

I have a 2010 MBP 6,2 with an aftermarket SSD. My machine gets mail and notifications while asleep, but I do not have any powernap pref box in energy savings under 10.9.1
I do not have an Apple SSD. I have a Crucial M4-CT512M4SSD2
Apple did replace my MB last Fall under the video fault problem (for free after 3 years.....thanks Apple), but it stills identifies as a 6,2 Boot ROM MBP61.0057.B0F
I wish I could shut off this powernap feature, but have no access to it.

MBP mid 2010 - 15" 2,4Ghz (Battery Problem)

Hi guys.
I have a MBP mid 2010. My battery wont last more that 4.30 hours.
I have tried more than enough times to test' it.
Last Night with fully charged battery I was able to get 4.40 Hours.
Bluetooth OFF
Low monitor brightness
Low keyboard illumination
Air Port was on.
Basically web browsing and 4 or 5 youtube videos.
Did not make any software instalation or updates.
4.30 hours its just to low.
BTW it as 37 full charges
My work laptop wich is a Dell Latitude E6400 with a 9cell battery I get more than 5 hours. And it as way more full charge cycles.

Certainly not... but I'd rather source a complete antiglare clamshell lid and slap it on myself thus upgrading the machine, as long as I know I wouldn't have to replace the logic board as well... I've done plenty of surgery on notebooks, from removing a stuck business-card shaped CD from a 12" PowerBook G4 (requiring *complete* disassembly of the machine) to swapping ThinkPad T61 motherboards into T60 chassis creating a 15" 4:3 IPS FrankenPad which can take 8GB of ram... so I can handle swapping a display.
Local apple store hasn't told me clearly whether or not it's possible, just that they will only replace it with the original screen...
I can only find one logic board part # for a 2.4GHz mid-2010 15" MBP, which suggests to me that upgrading the screen should be no problem, but I'd love to hear from someone who's done it or can give a definitive answer as to whether or not it's possible...

Can I system restore a purchased mbp mid 2010 but keep the upgraded OS?

I purchased a used MBP mid 2010 and had the seller meet me at the apple store. After I verified the computer was not stolen I asked to have it factory wiped, but they said I needed an appointment. Now I've read directions on this forum on how to restore it myself, is it the same technique they use in the store? Can I restore this machine and keep mavericks or must it be restored to the original OS?

fastcash124,
when Mavericks is downloaded from the Mac App Store, it is non-transferable; the seller should have wiped it from the internal drive before selling it to you. Once you’ve done a clean reïnstallation of Snow Leopard and run Software Update to get it to Mac OS X 10.6.8, you can then download and install your own (non-transferable) copy of Mavericks from the Mac App Store.

Hi! I use MBP mid 2010. as per apple. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem. Help please?

Hi! I use MBP mid 2010. I upgraded my ram to 8gb 1066 mhz as per apple. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem. Help please?

Hi! I use MBP mid 2010. I upgraded my ram to 8gb 1066 mhz as per apple. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem. Help please?

My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
Thanks in adavnce for help.

Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
"Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

My MBP Mid 2010 with 1066mhz 8gb ram freezes and restarts while using safari. Any help?

Hi! I use MBP mid 2010. I upgraded my ram to 8gb 1066 mhz as per apple instructions. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem.

Corsair has two part numbers regarding 8GB 1066MHz DDR3 RAM.
See image below - first image is for non Apple notebook/laptop - second image is for Macbook and Macbook Pro.
Which RAM did you buy?

After ML upgrade, MBP mid 2010 crashes or freezes when connecting/disconnecting apple cinema display, specially when is put to sleep.

After upgrading to ML, when I connect my MBP mid 2010 to my Cinema Display system crashes, if I close the mac to put it to sleep, it freezes, if I pull the power cord and then disconnect the cinema display, it freezes to black.
Bottom line... MBP + ML + Cinema Display = Useless aluminum can.
Any Help??? .... Please????

I have exactly the same problem. I found that unplugging the Cinema display (both from the MB and power) and re-connecting did exactly nothing, but that the MS Windows solution works: Reboot your machine.
Note: the problem comes up when the display sleeps, not the computer.
We are really making progress here with the evolution of OSX! NOT!

My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Pleas

My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Please advice what shall I do.

Do you have a 15" mid-2010? If so then your problem is surely...
Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton

New ssd install in MBP 5,3 (mid 2009 model)

Hello,
New to ssd installing and terminology used in some of the discussion forums I have been reading!
About to install my new ssd and have a few questions before starting. (ssd is a crucial M500 480gb)
I'll try to be a blunt as I can because I tend to ramble on.......
1. Do I upgrade/downgrade efi? (Read in other discussions)
2. Do I enable/disable trim? (Read in other discussions)
3. I am currently running 10.6.8 and wanted to purchase the newest OS possible to install. I've read of a few issues of ML and the battery drain issues. Is it best to just stay with my 10.6.8 for now?
4. I also purchased an 8gb ram upgrade over the current 4gb ram to do at the same time. Don't I have to reset something once I power the MBP back up to recognize the ram?
5. I purchased an external case to put the (currently in the computer) hdd in once I take it out. I planned on installing the ssd, putting the current hdd in the case, and migrating only my contacts, iTunes library, iPhoto library, and my flip videos from it. I have the original install disc from my MBP-can't I just install it onto the ssd from the DVD drive? (I hear of people installing the OS from USB-is there any disadvantage/advantage to this over my install disc?). I'm just wondering if it will give me the option of installing from the DVD drive once the ssd is installed and blank. ??
6. Is there anything else I should consider migrating to my new ssd?
I think that's it. Thanks!!

This maybe too late, but here it goes:
1. Do I upgrade/downgrade efi?
- do not mess about with that. I have a mid 2009 MacBook Pro and am running 2x SSD drives inside without a problem. Only look in to EFI upgrading if the Negotiated Link Speed in System Information (Under Sata) is not reported as 3 Gigabit but rather as 1.5, once you install the SSD
2. Do I enable/disable trim? (Read in other discussions)
- some people report advantage from trim being enabled. I've personally noticed lockups during shutdown so keep it off. Typical SSD these days have grabage collection, but it is up to you in the end of the day.
3. I am currently running 10.6.8 and wanted to purchase the newest OS possible to install.
- don't purchase anything and download Mavericks for free, battery life will improve
4. I also purchased an 8gb ram upgrade over the current 4gb ram to do at the same time. Don't I have to reset something once I power the MBP back up to recognize the ram?
- the mac will recognise the ram anyway. You should however rest SMC see: http://support.apple.com/kb/HT3964
5. I purchased an external case to put the (currently in the computer) hdd in once I take it out. I planned on installing the ssd, putting the current hdd in the case, and migrating only my contacts, iTunes library, iPhoto library, and my flip videos from it. I have the original install disc from my MBP-can't I just install it onto the ssd from the DVD drive? (I hear of people installing the OS from USB-is there any disadvantage/advantage to this over my install disc?). I'm just wondering if it will give me the option of installing from the DVD drive once the ssd is installed and blank. ??
- yes by inserting the Disk in to the optical drive and holding 'C' during startup wil take you to the boot options, where you can format the SSD drive and install the OS
- advantage of OS on USB is faster install (quicker read speed) and for those people like me who substituted the optical drive for another HDD or SSD.
6. Is there anything else I should consider migrating to my new ssd?
- depending on your previous HDD size (and file sizes - looks like you have lots of photos and videos), make sure you watch what files you are bringing over as you can quickly run out of space on the SSD. You can use OmniDiskSweeper for example, to tell you wat files on your disk use the most space etc.
Hope this helps. And I am sure someone else will come up withh more suggestions

Ssd not mounted after reboot (mbp mid 2010)

I Have a question regarding an issue with my macbook pro mid 2010.
I Just reached home and opened my macbook and decided to restart it after a days work (normally i put it to sleep by closing the lid).
to my suprise, it won't boot anymore. First a grey screen with a prohibited sign, then after rebooting again the recovery is launched. When I check disk utility the SSD is recognized, but appears not mounted and renamed to disks2. I checked the sata connectors, which appeared to be fine.
macbook got 8gb ram; ssd=500 evo, which I installed about a monh ago without any problems. Clean installed yosemite last week.
Anyone an idea what is wrong and what can be done?

It would appear that the SSD is faulty. Replace it with another one.
Ciao.

15" MBP Mid-2010 (6,2) SMC 1.7 Broke my MBP

Hi All,
My beloved 15" Mid 2010 MacBook Pro is not well and is sitting on life support and is only barely amongst the living. On the 23rd Feb 2013 I noticed the SMC 1.7 firmware update in my AppStore App (this firmware was released on the 13th of Feb if I can recall correctly) and unfortunately I clicked install.
The update started to install and then stated that my Battery should be charged (it was 100%) and power plugged in (it was) and requested a reboot to which I clicked yes. Started rebooting and installing the firmware and rebooted once or twice automatically and then after the final reboot, screen black and no Apple Power boot sound. I left it for 5mins and then thought ok, maybe its powered down. Pressed the Bower button and all I could hear was the CD-Rom powering and no display and no sound. I tried the PRAM reset, SMC reset but nothing. The following day I took it to our only Apple Center (Live in Windhoek,Namibia) in the Country. The next day they phoned and said that my Logic Board is faulty. I told them that my MBP was perfect until the stupid SMC update. They told me that I can leave a kidney and a peace of my liver as for the repair costs will be something like US$900 or I could buy a second hand Logic Board for something like US$500.
This is a no go for me as for all was fine up until the SMC update came through. As for I had nothing to loose now anymore, I opened the MBP and removed the Battery and with the power cord disconnected and holding the Power Button for a couple of seconds and while holding the Power Button, connecting the power cord and after a few seconds releasing the Power Button again, my MBP started up. Problem now is that my Fans run 100% and the keyboard backlight is dead and the battery does not charge nor is seen by the MBP. I can now switch it off an back on and my MBP will power up and boot into OSX. If I do a SMC reset (holding shift control option while pressing power button), I am back where I started - MBP not power on, but battery charges again etc. Doing the whole battery removal again with power button pressing and only then connecting the power cord, it starts again.
After booting into OSX, I had a look at my system profiler and now see that the SMC version is 1.70f6 and as per this page http://support.apple.com/kb/ht1237 , my version should have flash 1.58f17 - Seems like there was a bug in Apple's SMC 1.7 Firmware code it it thought that my 15"MBP was a 17"MBP and now my SMC does not talk propperly with my hardware it seeems. I maild the Apple Guys here in Windhoek about my findings and asked them to get in contact with the Apple Geniouses overseas to find out if they could downgrade the SMC again or if they have a fix, but they don't want to help and just sayed I must have a look on www.apple.com/support and downloads and search for my SMC version and install.
That does not work as for the packages just say its not for my version - well my version is not for my MBP!
Is there maybe somebody that can help me or should I just throw my MBP away, of maybe wait 2 years in hope that another SMC version will come out that will load the propper SMC code onto my MBP? Please Guys and Girls out there - any manual way maybe of forcing a SMC firmware downgrade or reapplying the propper code of version 1.7?
Please and keeping fingers crossed.
Mark

Ok, it has now been three months since the last SMC 1.7 firmware update broke my mid-2010 15” MacBook Pro and having had it at two different Apple “Certified” technical centers and both told me that there is nothing that Apple can do except for replacing the Logic Board for something like US$ 500. I was not going to pay that amount for a 2010 MacBook to have its LogicBoard replaced so I unfortunately went out and bought a new MacBook Pro last month. Why unfortunately ............. BECAUSE I MANAGED TO FIX MY OLD MBP :-)
As of yesterday, I personally see a Apple “Genius” on the same level as the Petrol Attendants here in Africa that fill up your car! They know you need fuel to be able to drive your car, but that is where their knowledge or drive to figure something out stops. Ok, I am still very upset of having to fork out so much money for nothing. And yes, I do not like Apple personnel anymore, but I cannot live without my Apple machine (that is why I bought another when my old one was thought of being pushing up daisies).
I only managed to do this as for I had a brick lying around and I could not live with the idea that nothing can be done by recovering or downgrading the SMC firmware except for replacing the LogicBoard. I can also not imagine that Apple Personnel do NOT have a low level firmware recovery tool for the MBP 2010 and above models.
Ok, how did I fix it? By pure luck and by putting 1 and 1 together and getting 11 and not two :-)
If you happen to have a SMC firmware update that went bad on your machine, in my case the SMC 1.7 has three models SMC updates in one file and it loaded the wrong version onto my MacBook Pro, you can try the following:
Symptom:
MacBook Pro does not want to power up. You can only hear the CDRom making some noise and screen stays black and MBP powers off again.
Do this only if there is no other way around and when our of Warranty. Do this at your own risk.
The Fix:
Disconnect power
Open MBP and disconnect/remove the battery - close the back cover again
While power is still disconnected, press and hold the power button for about 5 seconds and then while pressing and holding the power button, connect the power cable to the MBP.
If you are lucky, your MBP will now power up with the fans blazing at 100% and keyboard backlight will be off. This seems to be a recovery emergency mode or something. If you MBP did not power up, try again. If your MBP does not power up then you have a different problem and don’t need to continue the following steps.
Boot you OSX and go onto the Internet and Download the right SMC firmware version for your MBP from: http://support.apple.com/kb/HT1237
Mount/Open the .dmg file and copy out the “Firmware”.pkg file.
Use Pacifist or the command line to extract the content of the .pkg file.
In my case the Apple SMC update had three models firmware in the .pkg file and the correct one for the Mid-2010 15” model was in the folder SMC18 or something. Find your correct model firmware for your MBP and copy out the following two files: SmcFlasher.efi and 2010MBP15.smc (the 2010MBP15.smc will be different for other MBP models)
Copy those two files onto the OSX disk drive to a location that you can remember like /User/username/Dowloads/smc or where ever.
Google and search for rEFIt . This is a boot loader app the will take over the boot process when you start up your MBP to enable you to go into a shell utility. Read up on how to install and how to activate the refit utility. When installed and enabled, the next time you reboot your MBP you will see the utility start up before your OSX boots.
If you see the rEFIt utility start after you rebooted the MBP, use the arrow on your keyboard and select shell and press enter. The shell.efi utility will start to boot in a “DOS” like window and after you see something where it wants to configure or setup something, just press ESC to cancel that.
After the util booted, you need to first change to your internel disk with the command “ fs1:” that is F S ONE Colon then Enter, standing for filesystem 1
Now you can change to the folder to where you copied the two firmware files like :
cd Users
cd username
cd Downloads
cd smc
There are different ways of going to the folder or find the place where you put the files.
After finding the folder with the two files you can start the update process.
First need to get the SMC into the right state
SmcFlasher.efi -reset 1
Your MBP fans should now quiet down.
Lets Flash :-)
SmcFlasher.efi -force -LoadApp 2010MBP15.smc -norestart
Your SMC should now be flashing with the right version. Once done, power down the MBP. Power the MBP back on and do a SMC reset and all should be fine now. You can now connect the battery again and start using your MBP.
Hope this helps somebody. No Warranty and this is done AT OWN RISK!

How to stop MBP mid 2010 having lots of Kernel Panics?

I got my first MBP in mid 2010...by that time it was the high end 15' MBP (Processor 2.66 GHz Intel Core i7, Memory 4 GB 1067 MHz DDR3, Graphics NVIDIA GeForce GT 330M 512 MB). After 4-5 months of purchasing it I started having a lot of crashes out of the blue (so called Kernel Panic). First, I thought it was related to the iDVD app, but later it was crashing randomly. At Apple Store they formatted the computer, repaired permissions and all that kind of stuff, no luck. After that Apple made a complete restoration of the entire system, no luck. Apple then changed the HD, no luck. Then they said it should be something on the logic board, but the store manager was kindly enough to replace the laptop for a completely new one!!! After Mavericks came out (might be just a coincidence) I started having crashes again. At first, they were very rare so I didn't care that much. However, it started to crash all the time that make it impossible to work with (5 times in a row). I decided to take the computer to an Apple authorised repair shop. After running all the tests they told me that the HD data cable and also the HD was failing. Replaced it all by myself, which was very easy, installed OS 10.9.5 and guess what? Still crashing...I tried all sorts of tests: 1) Run the OS from an external HD, crashes! 2) reinstall the system many times, crashes! 3) I did not install any third party apps, still crashes!....and no luck whatsoever....as a matter of fact it crashes most frequently with Safari app previous ones and now the 7.1 version. After researching I noticed that this model might have a problem with the graphics (which was no detected in the Apple authorised repair shop, cause I asked the representative many times about it)... After all this, I guess the problem could be a bug with Mavericks (but that could be just a coincidence) or this MBP model was destined to suffer from this and it is just a matter of "when" it will happen (maybe poor graphics?). I'm felling frustrated and hopeless....Any thoughts to stop this problem will be much appreciated. Thanks,

Thanks in advance for any help! I hope I got right all the info you requested. There you go:
Thu Sep 18 23:46:27 2014
panic(cpu 2 caller 0xffffff7f82fa4f7c): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0x0a2910de 0x00100000 0x00000000, BAR0 0xd2000000 0xffffff811ca7c000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 2), Frame : Return Address
0xffffff810aafb6b0 : 0xffffff8000c22f79
0xffffff810aafb730 : 0xffffff7f82fa4f7c
0xffffff810aafb800 : 0xffffff7f81626f1b
0xffffff810aafb8c0 : 0xffffff7f816f050a
0xffffff810aafb900 : 0xffffff7f816f057a
0xffffff810aafb970 : 0xffffff7f8196f056
0xffffff810aafbaa0 : 0xffffff7f81713ba9
0xffffff810aafbac0 : 0xffffff7f8162d96d
0xffffff810aafbb70 : 0xffffff7f8162b478
0xffffff810aafbd70 : 0xffffff7f8162c518
0xffffff810aafbe50 : 0xffffff7f815d92de
0xffffff810aafbeb0 : 0xffffff7f82f764e6
0xffffff810aafbf00 : 0xffffff7f82f7520e
0xffffff810aafbf20 : 0xffffff8000c4a20a
0xffffff810aafbfb0 : 0xffffff8000cd7607
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7f82f96000->0xffffff7f82fa9fff
            dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f82f8e000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8152c000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f812bf000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f81584000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f82f91000
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f815d7000->0xffffff7f8183ffff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f812bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f815c7000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f81584000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f8184a000->0xffffff7f81af3fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f815d7000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f812bf000
         com.apple.driver.AGPM(100.14.34)[B40DF46A-AA80-39C2-BBC6-DA5DF93509AC]@0xffffff 7f82f73000->0xffffff7f82f85fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f812bf000
            dependency: com.apple.driver.IOPlatformPluginFamily(5.7.1d6)[67BEDCC9-E9AB-3F32-82CE-84729F B82C0A]@0xffffff7f82018000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f815c7000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f81584000
            dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f82f6d000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x0000000000a00000
Kernel text base: 0xffffff8000c00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 832920646542
last loaded kext at 245909754292: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f830ae000, size 65536)
last unloaded kext at 306500391916: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f830ae000, size 57344)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.GeForceTesla 8.2.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleLPC 1.7.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleIRController 325.7
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1

320Gb HD to a 512Gb SSD on 13" MBP (late 2010)

I have a 13" MBP (late 2010) with a 320Gb HD. I would like to upgrade to a 512Gb SSD. Any recommendations? Thoughts?

Thank you for you input! I appreciate it!
Would you happen to know what else would change with a new SSD? I read that they have a few inconveniences relatig to how many times you can rewrite over a same spot on the SSD that regular HD's don't have... but the fact that it would run cooler, be somewhat faster really makes me want to buy it! I guess I'll wait until the prices lower a bit more so I can get a good deal on more Gb's.
Thanks again!
S.

Problems with Cloning Old SSD to new SSD on i7 MBP

Alright, I'll try to be as brief as possible.
I recently transferred or am in the process of transferring my old info from a Mac Pro Tower to a new 2.8 i7 MBP. Previously, I had a 40GB SSD drive with my OS and Apps and it ran perfectly fine, however I needed more space. I ended up buying a Crucial M4 128GB SSD and upgraded the RAM to 16GB and have since had problems with the Crucial. I just now updated the firmware but that didn't seem to fix a thing.
So what I've done is initialized the M4 SSD w/ Disk Utility via Mac OS Extended (Journaled) and I've done a clone using Time Machine (it worked but it was really slow and would occasionally lag for 30 seconds out of nowhere with a beach ball) and I've also done a clone using Carbon Copy and that was ridiculously slow (I would get a beach ball every 5-10 seconds and just opening a new window in the finder would cause a beach ball).
I don't know what could be the problem. I've since made a bootable SD card with both Leopard and Lion, thinking I'd just install a brand new OS onto the new SSD, but those aren't working for some reason.
So yes, I'm currently using the previous and well-working 40GB SSD, but I'm lost and would appreciate anyone's help!
Thanks in advance!

Csound1 wrote:
Shootist007 wrote:
Csound1 wrote:
Shootist007 wrote:
On NEW Macbook Pro's to boot from the Online Recovery HD system you hold down Command+Option+r.
I believe that it is cmd-r, no option key.
On new MBPs, late 2011 models (At least on mine) to access the Online recovery system you have to hold down Command+Option+r. Of course this was with Lion installed and a real Lion Recovery HD partition on the hard drive.
I can't find documentation anywhere for that, and my 2011 iMac goes to recovery using cmd-r and ignores cmd-opt-r, may I ask you to post the documentation?
Right there is none. As stated on my Late 2011 MBP 15" with hard drive installed with Lion and recovery HD partition in place to boot from the Online recovery system I must hold down Command+Option+r.
Now if I had no recovery HD partition maybe Command+r would work. I don't remember if I tried that, although I think I have and as far as I can recall it is the same.
This has been covered before with others doing tests and IIRC all others with NEW MBPs need to hold down those 3 key to access the online system. Note that this is on NEW, late 2011, MBPs. Not sure about early 2011 models or late 2010 models with the updated firmware.
In any event holding down those 3 keys if the other command, Command+r, doesn't work won't cause any harm to the computer. It's not like the computer will self destruct if you hold down those keys.
On the same Mac to boot the Online Apple Hardware Test, which is normally holding down the d key, I have to hold Option+d. There's no documentation on that either.

Indstalling new SSD in my MBP mid 2010

Similar Messages

Maybe you are looking for