Industries and Bussiness partner in IS-U

Hi sap guru's,
  I am sivakumar, i am doing project on IS-U and CRM, but i am new for these concepts, any one tell me what is installation (ES30 Tcode), Industry, and Bussiness Partner(BP Tcode) and what is the relation between these three things,
Thanks & Regards,
Sivakumar.

In the SAP Menu u will have Utility Industry
BMD ::  Business Master Data
TMD :: Technical Master Data.
Create Contract account throught CAA1 tcode.
Then u have to create Technical Master Data.
Connection Object  :: ES55
Premise     :   ES60
Installation  :  ES30
then EC50E to create a move in document
then automatically contract will be create.
if u want to assign multiple contracts to contract account then
create another installation and give the same premise ( if u want you can create a new one also) and give contract account number and save it.
It will creates a another contract.
Please allot points if it helps.
Regards,
Shiva.

Similar Messages

  • Creation of bussiness partner using idoc CRMXIF_PARTNER_SAVE

    Hi,
              how create a bussiness partner using the idoc CRMXIF_PARTNER_SAVE

    Hello!
    This is not easy, but still...
    0. Generate Idoc interface if not done already.
    1. Define Idoc port in WE20 transaction, allowing inbound processing of this Idoc type.
    2. In WE19 (test Idoc) transaction, you could create Idoc with necessary data. For field reference and some internal commands - visit http://ifr.sap.com and locate appropriate RFC.
    3. Test it!
    For real samples - you could configure some middleware sites in CRM and assign them to XIF - Idoc interface.  With test program CRMXIF_PARTNER_TEST you could unload Idoc to this destination site.
    Good source of Information - Michael Van Geet has some guidelines on how to set up a XIF site. These manuals describes required actions in details.
    My best regards, Andrei Dirotchka

  • Activation of Discrete Industries and Mill Products in existing IDES system

    Dear Sir,
    I want to activate Discrete Industries and Mill Products in my existing IDES system (EHP4 FOR SAP ERP 6.0 / NW7.01)
    Can some one help me with what steps i need to follow.
    Also does it will effect the existing data in IDES....?
    Thanks in advance .
    Regards

    Hi Sunnny,
    Thanks for your reply.
    as i checked in IDES , facility to activate the addtional packages are there.
    with transaction SFW5, i can select the required package and activate it.
    but during this process system is giving some warning,
    *Note, that not all Business Function Sets or Business Functions provided with SAP ECC 6.0,might be covered by the respective customers' license and maintenance agreement. Use of and access to said software components provided with SAP ECC 6.0 may be subject to additional fees and conditions as stated in SAP's then current list of prices and conditions.
    Caution: When you activate an industry solution, this results on the following restrictions on your system. Note that you cannot generally combine one industry solution with other industry solutions or add-ons. Furthermore, an activated industry solution cannot be deactivated. The release strategy note for the desired industry solution can be found in note 838003. The release strategy note contains a reference to the installation note. Read the note on installing/activating the industry solution before beginning activation*
    so i want to know what will happen if i click I agree for this warning message.
    just by following this process its possible to activate the required bussiness function...?
    Thanks
    Regards

  • Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.

    Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.?

    I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
    What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
    Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
    Thanks again for "anyone" that can help me!!!

  • I have 2 iPhones sharing an apple ID (mine and my partner). we have just created separate ID's now that family sharing is available. but the partner's ID wouldn't let her update apps purchased on my ID! Help Please

    I have 2 iPhones sharing an apple ID (mine and my partner). we have just created separate ID's now that family sharing is available. but the partner's ID wouldn't let her update apps purchased on my ID! Help Please

    This is happening to me also but only with certain apps. The message I get with the apps that won't update is "Update Unavailable with This Apple ID. This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled".

  • Me and my partner have just brought a new MacBook. We both have individual iTunes and iCloud accounts, is there any way we can access both accounts on one computer?

    Me and my partner have just brought a new MacBook. We both have individual iTunes and iCloud accounts, is there any way we can access both accounts on one computer?

    Set up 2 accounts one for each of you.

  • How to change Sales office in Bussiness partner details

    Hi ,
          I am unable to make changes in Bussiness partner details ie in Tcode BP .Since the Sales area data has been desabled .
    So can any one guide me how to change sales office in BP
    regards,
    divya

    Dear Anirudh ,
    When i checked the org Structure ,there same user has been assigned to two sales offices.
    So when it is taking the sales area data ,it is capturing the data from jammu sales office rather than Chandigarh.
    I can't change the User that has been assigned for more than 2 sales offices b'cos of the restriction of User-id
    So please help me.
    regards,
    divya

  • BP change documents ( linking problem between Object id and Business Partner)

    Hi,
    We need to create a report for documents changed for a Business partner.
    This will be done in sap bw.
    on source side I have created the datasource with function module changedocument_read and I am getting most of the information
    which I want. Only missing part is Business Partner number.
    Can somebody suggest , how I would be able to link Object Id to business partner.
    I need to pull everything that is changed at BP level and the Object class selection around 30 in number.
    So I am looking for any standard function module which can provide me the link between Object id and Business partner.
    If I establish the rules to determine the Business partner from Object id , its getting bit difficult.
    Can somebody please help/suggest.
    I have gone through many documents and scn posts but unable to find anything on this.
    Thanks !

    Hi, looking at the change history header table CDHDR it seems that object ID simple equals the internal format of the business partner number.

  • Validation for Profit Center and Trading Partner

    Hi Gurus,
    Please help me in creating validation for Profit Center and Trading Partner.
    I want system to give an error if we use Trading Partner related to particular profit centers.
    Please revert asap.
    Thank You

    Hello,
    Please use T.code OB28 and select the call up point 2.
    Than go to Prerequisite in expert mode and say
    Prerequisite  :           BSEG-VBUND <> ' '
      Check:               BSEG-PRCTR = ' '
      Error Message.: xyz
    I have created Validation understanding if someone gives Trading Partner and also Profit center while posting a doc than it will generate an error message.
    however if you have some diff req please change it accordingly/ take Abapers helps if not very clear.
    I hope this helps
    Regards
    Shireesh

  • Business Partner Role  and Business Partner Grouping

    Hello Everybody!
    Business Partner Role  and Business Partner Grouping.
    Which correlation ist between this attributes existing.
    In which table are this infos stored, In order create I can use
    e.g. BUPA_CREATE_FROM_DATA
    but how is the way inversely. Suppose I want to abtain the information
    about a existing business partner which group he has etc.
    Regards
    sas

    Dear Sas,
    Business Partner Grouping is used to determine the number ranges to be used by the business partner at the time of creation.
    Business Partner Role determines the subset of all the data available to be shown and edited.
    I will give you a very simple (but imaginary) example for understanding the role concept: the business partner in a role of employee might allow you to enter a department id. So this field should be available to you for input when you edit the business partner in the role of employee. But suppose the same business partner is also a person who is your customer. And your customer will require a default payment term. So this field should be available for input when you edit the business partner in the role of a customer. Also, some applications use these roles to determine if the business partner is suitable for particular transaction. In the above example, Payroll application will only allow those Business Partner to be used if they are maintained as an employee. Similarly the sales application can mandate that you can only sell a product to a business partner if he is maintain in a 'customer' role.
    Please understand the example above is not real but given for the understanding of the concept of role.
    You can use the function module 'BUPA_CENTRAL_GET_DETAIL' to find the business partner group. And you can use the function 'BUPA_ROLES_GET' to find the role assigned to a Business Partner.
    Regards, Rakesh

  • Sender and receiver partner number,

    Hi All,
    In the control section of an idoc, there are two fields - sender and receiver partner number. If my application sends an inbound idoc to Sap R/3, the two fields are not necessary? I have noticed the logical system has been assigned to the client.
    If somebody can explain the usage of sender and receiver partner, I would be much appreciated.
    Thanks,
    Dennis

    Hello,
    Can you please check the documentation: SAPBCSapAdapterGuide in your packges -> SAP -> Doc direcotry? The Chapter: 6
    This should explain you how to set up the Routing.
    Best regards,
    Dezso

  • Customer and Vendor Partner Functions ?

    What are the different Customer and Vendor Partner Functions ?

    Hi Manoj,
    I guess most of ur questions are related to SAP Business One (Functional) rather than the SDK. So please post ur questions in the SAP Business One forum rather than in the SAP Business One SDK forum. Then u'll get quick replies.
    Vasu Natari.

  • Trading partner and Trading partner business area tables

    Hi Sap Experts,
    Trading partner and Trading partner business area if both are master data in which table both will be stored.
    Please give me advise.
    Regards,
    Prabhakar
    double post

    Hi,
    Please refer to the below links :
    For Trading Partner:
    http://help.sap.com/saphelp_45b/helpdata/en/d7/0753e743b911d189ee0000e81ddfac/frameset.htm
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/01/a9b4e3455711d182b40000e829fbfe/content.htm
    For External Manufacturer:
    http://help.sap.com/saphelp_di46c2/helpdata/en/7f/a7e7464d6011d2b438006094b9c9be/content.htm
    Regards,
    Kiron Kumar T.

  • FAGLFLEXT table not updating Transaction type  and Trading Partner

    Hi,
    The document which i post is development system is posted to FAGLFLEXT table properly along with the transaction type and trading Partner; however in the quality and production the document is getting posted in the table FAGLFLEXT but the transaction type and Trading partner fields are not getting updated for these documents it is coming as blank.
    Please give us answer ASAP.
    Thanks,
    Anil.B

    Hi,
    I got it. Just ask BASIS to Open the QAS system client and delete all scenarios which was assigned in DEV and transported in to QAS system and reassigned itand saved in QAS system and then its worked. all fields are getting populated.
    Go to IMG Fin Acc (New) -> Fin Acc Global Setting (New) -> Ledgers -> Ledger -> Assign Scenario
    Thanks,
    Anil.B
    Edited by: SAP FICO on Nov 12, 2009 5:09 PM

  • Updating and deleting Partner functions for functional location

    Hi ,
    I am having a requirement of updating and deleting partner function for functional location .
    If anyone can suggest some BAPI or function module for same .
    Thanks n Regards
    Manik

    Hi Fritz,
    Thank you for your response,
    My need is to create a PARTNERS for the FUNCTIONAL LOCATION.
    LET ME DESCRIBE IT.
    WHEN I AM CREATING A FUNCTION LOCATION USING IL01, AS I ENTER A FUNCTIONAL LOCATION AND PRESS ENTER IN THE NEXT SCREEN.
    AND
    I NEED TO ENTER THE PARTNERS FROM THE DROP DROWN MENU  GOTO ->PARTNERS
    WHICH TAKES ME TO THE NEXT SCREEN WHERE I NEED TO FILL THE INFORMATION IN THE TWO FIELDS : FUNCT & PARTNER.
    I need a partner for the functional location that i mentioned above.and i need to upload that information in through Emigall.
    So my query was that can we customize that partner for this functional location and if yes, what should the constraints,
    what are steps required? Do we require a custom service module?
    Regards,
    Robert.

Maybe you are looking for