Industry error while doing replication of customer from R/3 to CRM

Hi,
We have production system already implemented and going for roll out for another company both R/3 & CRM.
We have generated conditional objects while doing roll out phase. From then we are getting this error.
Problem:
Customers are not getting replicated to CRM. And in SMW01 the error log says
"Industry 300 not defined for industry system SAPS
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
Since we are going for roll out we have done initial load of all conditional objects
like 'DNL_COND_A002' etc.
After running we did checked in R3AM1 - everything was DONE - in green colour.
But in SLG1 - Display log - there are several entries in Red colour.
Message text says -
"It is not possible to change client-independent Customizing objects
Diagnosis:
Change of client-independent Customizing objects is not permitted in the client in which the transfer of data for table T682 is executed.
System response:
As table T682 contains client-independent Customizing, data transfer is interrupted.
Procedure for System Administration
Provide users with the appropriate authorization to execute data transfer in a client in which changes to client-independent objects is permitted."
Now queues are pilled up with the industry error and don't know how to correct these errors.
Please help.
Regards,
Dhanraj Dange

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Similar Messages

Error While Doing Physical Inventory (Customer Stock)

While doing the Physical Inventory for the Customer Stock, the following error is coming:
Fld selectn for mvmt type 701 / acct 45500000 differs for Profit Center (042)
Message no. M7093 Diagnosis Comparison of the field selection strings from movement type 701 and G/L account 45500000 has revealed that there is an incompatible field selection combination at one or more points. Field for which the field selection is different: Profit Center Example On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed. System response You cannot post this transaction, unless you have changed the field selection adequately
Pls. help in solving the problem.
Regards,

Hi,
before you go any further you should first check with your finance team that the correct GL account is being proposed. the reason that the fields don't match may be caused by the fact that the wrong GL has been set up in the auto tables (Trans event Key GBB, account modifier INV and whatever valuation area and valuation class is relevant).
If the GL account is found to be the correct one then you need to get someone from the FI team to change the field settings on that account to enable the correct data to be linked to it.
None of this is the domain of an MM consultant apart fron the auto account tables and so please do involve your FI team before you do too much.
Steve B

Error while doing multiple object updation from EP ! object lock error

HI all,
I am doing multiple object updation using a standard RFC(BAPI_PROJECT_MAINTAIN). The RFC i am calling from Enterprise portal. I am sending data to RFC one by one. But the error i am getting is object is locked by user so data can't be save.
Though i am using Lock and unlock method before and after calling RFC the project lock error comes up.
What might be the reason
regards
sandeep

Hi Sandeep,
Is the RFC you use for locking in the same model as the bapi BAPI_PROJECT_MAINTAIN? If it is not then you are using two connections for communication with the sap R/3 backend.
You can do 2 things.
1. You could add the RFCs for locking in the same model as the BAPI_PROJECT_MAINTAIN
2. Instead of adding the RFCs in one model synchronize the connections the models use as follows:
IWDDynamicRFCModel model1 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model1.class);
IWDDynamicRFCModel model2 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model2.class);
model1.setConnectionProvider(model2);
You can do this in the wdDoInit. This will make sure both models use the same connection but closing a connection will close both at the same time.
The same problem applies to commit/rollback functionality.
Regards,
Jeschael

Error while doing transport to Quality from Solman

Dears,
I am using Solman 7.0 SP15.
I have recently configured Charm,Now to test it funcationality I created one transport and as per process released it by solman.
Now I am trying to import this request by Solman into QAS but it is giving error:
TMS communication error with TMSSUP#QAZ.DOMAIN_DEV
Message no. XT153
Diagnosis
There was an error during communication with the RFC destination
TMSSUP#QAS.DOMAIN_DEV
System Response
The exact error message of the system is:
Name or password is incorrect (repeat logon)
Procedure
The function terminates.
Procedure for System Administration
Check your TMS configuration with the transaction STMS.
I checked all RFCs are working fine with authorization test,RFC TMSSUP#QAZ.DOMAIN_DEV is also working fine but its created with clicked logon screen option that i read is OK.
We have one RFC destination to 000 Client of our domain controller DEV.
Please suggest do i nead to create RFC destnations to QAS and PRD also to import requests or what is the root cause of this issue.
Shivam
Edited by: Shivam Mittal on Jan 22, 2009 9:30 AM

Hi,
TMSSUP#QAZ.DOMAIN_DEV Client 000 ...
Looks like the user who performs action "import to qas" does not exist in QAZ (000).
/cheers

Error while doing Transaction data loading from ECC to BW

HI,
I faced error in data records so i corrected it manually by going PSA Maintenance. then now when i am trying to schedule data laod by going to that Data source then right click on Manage then select Request which i have updated with correct records. then Again right click-->UPDATE WITH SCHEDULER .now next screen is SCHEDULER(PSA SUBSQUENT UPDATE) here i am not getting any Data Target means data target field is disabled so i cannot schedule it for load.
Any solution for this error.
Thanks
Nilesh Pathak

Hi,
I guess you have not deleted the request from the InfoCube 'Manage' Screen. If the request is already updated to your InfoCube/ODS ,then it will not show the Data Target in PSA Scheduler.
You can try to re-load the data using 'Only PSA' in the InfoPackage and then correct the errors and load the data using Update option from the Manage screen.
Thanks

ANT error while doing a setup-bpm from the OBPM documentation - antlib err

Hi,
Have anyone see this particular error and found a solution for the following problem:
I've tried using the samples in OBPM Enterprise version for weblogic. It has samples under OBPMWlHome directory samples/interop.
Setup my environment settings so that the ANT command works for regular java compilations and jar builds.
But, when i try to run the ANT with samples/interop/AntTasks build.xml and setting the properties, getting the following error:
build.xml:58: Problem: failed to create task or type antlib:fuego.tools.ant.enterprise:passport
and when i add the ANT_ARGS=-lib c:/oraHome/lib;c:/oraHome/ext a different error msg is displayed.
org/apache/tools/ant/antlib.xml:37: Could not create task or type of type: componentdef
Would you please give any insight into what can be done to resolve this issue.
Thank you and appreciate any help you can provide.
-Arjen

thank you.. it works..
not sure if this is something, that we need to configure differently in ANT1.81.
Apache site and ANT help messages in ant1.8.1 execute command mentions that this is not a bug..
in any case, appreciate your help on this to use ant 1.6.5
regards

Error while doing settlement from WBS to P&L Account

Hello
I am trying to do a settlement from WBS to P&L Account(Expense account). In this case, "Dummy" Prof Ctr is getting derived from 0KE5 (we have maintained a dummy prof ctr). We have set the validations to disallow any postings/settlements to dummy prof ctr. Hence I am getting an error while doing settlement.
Now I am maintaning a Prof ctr in my WBS master data. I am unable to understand why system is deriving dummy prof ctr and not the one maintained on WBS master data. The settlements are working fine when I do them against Balance sheet accounts and proper prof ctr is getting derived, which is being maintained on WBS master data. I am getting trouble only while doing settlement to my P&lL i.e. expense accounts.
can anyone throw some light on this?
Thks
Sarang

Dear Sarang,
You have maintained profit center in WBS master which is not updated at the time settlement to FI that what makes you worried. If you are making FI posting and give WBS as an additional account assignment then Profit center in WBS master will be updated. Here in settlement WBS is sender not the receiver so that profit center will not be updated. In settlement receiver (any) is debited and sender (WBS) is credited so this credit entry will be updated in profit center.
To your second query that when you carry out settlement to balance sheet account right profit center is updated then please make sure, that balance sheet account is maintained in 3KEH with profit center or OKB9.
Your P&L account (expense) receives dummy profit center because it is not able to find cost center which can fetch profit center from the master. So, if you can afford, maintain that cost elements (expense account) with profit center in OKB9.
might help you..........................................................

Error : Contract does not match customer and item information[OSCI.ManufSN]

I need to add Service Call from Service Contract through DIAPI. "Mfr. Serial no" is set as "Unique serial no by" in system general settings.
Creating two Customer Equipment Card from the cfl provided on Service Contract in Item Tab and Internal serial is blank in created Cutomer Equipment Card.
One is terminated and other is active have the same ItemCode but different customers then while adding Service Contract I am paraller generating service call through DIAPI but the system is throughing error - "Contract does not match customer and item information [OSCL.IntrnalSN]"
Thanks
deepak gaur

HI,
Service Contract can be for a specific customer
The contract type cound be (Coverage):
1. including all items (Type Customer) in this case the dates of the coverage is defined in the head!
2. Including specific serial numbers
3. Including item groups
The status every case should have to be Enabled/Approved for valid contract (OCRT.Status = 'A').
In case of Do not forget to set the valid from and valid to dates to define in the system the coverage. (header and items tab from/to dates)
Now, If you create service all, the system will use the first possible Service Contract. IF you have more: you have to select the contract manually.
Ex:
1. One for customer including all items
2. One for a specific serial number
Best Regadrs,
János

Error while doing "Visulaize Plan"

Hi,
Before i did Visualize plan many times without any problem.Now I am getting error while doing so.
I was able to run "Explain Plan" successfully.
I am on HANA revision 60.
I saved above error log and the log information is given below:
I can identify invalid XML tag <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved> but how to fix this issue?
I gone through various blogs related to Visulaization Plan but not found related to this issue.
<Plan xmlns="http://www.sap.com/ndb/planviz" ID="ID_0" Type="Estimated">
<SQL><![CDATA[SELECT KOKRS, BELNR, PERIO, SUM(MEGBTR)
FROM "_SYS_BIC"."raj/AN_VIZ"
GROUP BY KOKRS, BELNR, PERIO]]></SQL>
<CompileTime>
<Start Unit="us">1401281467643661</Start>
<End Unit="us">1401281467658329</End>
</CompileTime>
<RootRelation ID="ID_0" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<ExecutionType>Row Search</ExecutionType>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
   <Exclusive Unit="us">2.12902e+06</Exclusive>
   <Inclusive Unit="us">2.64021e+06</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Projected Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)","Project column0":"NString(4, 0) __trex_field_NVarchar3__() ....... [3]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [0]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [1]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 0 ....... [2]:LOAD:<4/5 (4B)>:","Project column1":"NString(10, 0) __trex_field_NVarchar3__() ....... [8]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [5]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [6]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 1 ....... [7]:LOAD:<4/5 (4B)>:","Project column2":"NString(3, 0) __trex_field_NVarchar3__() ....... [13]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [10]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [11]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 2 ....... [12]:LOAD:<4/5 (4B)>:","Project column3":"Decimal(18, 3) __typecast__() ....... [23]:076:<10/12 (16B)>:
/1/ Fixed16(18, 3) __trex_field_Fixed16__() ....... [19]:043:<6/8 (16B)>:
     /1/ void* \"__rids__\" ....... [15]:NOP:<0/1 (8B)>:
     /2/ int32_t(10, 0) const := 0 ....... [16]:LOAD:<3/4 (4B)>:
     /3/ int32_t(10, 0) const := 3 ....... [17]:LOAD:<4/5 (4B)>:
     /4/ int32_t(10, 0) const := 3 ....... [18]:LOAD:<5/6 (4B)>:
/2/ int32_t(10, 0) const := 18 ....... [21]:LOAD:<8/9 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [22]:LOAD:<9/10 (4B)>:"}]]></Details>
<Child ID="ID_8" >
</Child>
</RootRelation>
<Relation ID="ID_8" TypeName="TREX_SEARCH" Status="Finished">
<Name>Column Search</Name>
<ExecutionType>Column Search</ExecutionType>
<Summary><![CDATA[Aggregation on a single table]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
   <Exclusive Unit="us">511194</Exclusive>
   <Inclusive Unit="us">511194</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved>
<LogicalPlan ID="ID_11" Type="Estimated">
   <RootRelation ID="ID_11" TypeName="PROJECT" Status="Finished">
    <Name>Project</Name>
    <EstimatedCost>
     <Exclusive Unit="us">0</Exclusive>
     <Inclusive Unit="us">0</Inclusive>
    </EstimatedCost>
    <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
    <Child ID="ID_12" >
    </Child>
   </RootRelation>
   <Relation ID="ID_12" TypeName="GROUP_BY" Status="Finished">
    <Name>Aggregation</Name>
    <Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO\nSUM(raj/AN_VIZ.MEGBTR)]]></Summary>
    <EstimatedCost>
     <Exclusive Unit="us">0</Exclusive>
     <Inclusive Unit="us">0</Inclusive>
    </EstimatedCost>
    <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
    <Details><![CDATA[{"Grouping Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO","Aggregation Cols":"SUM(raj/AN_VIZ.MEGBTR)"}]]></Details>
    <Child ID="ID_13" >
    </Child>
   </Relation>
   <Relation ID="ID_13" TypeName="TABLE" Status="Finished">
    <Name>Column View</Name>
    <Schema><![CDATA[_SYS_BIC]]></Schema>
    <ObjectName><![CDATA[raj/AN_VIZ]]></ObjectName>
    <Location>hanasp7:30003</Location>
    <EstimatedCost>
     <Exclusive Unit="us">0</Exclusive>
     <Inclusive Unit="us">0</Inclusive>
    </EstimatedCost>
    <EstimatedOutputCardinality>682404</EstimatedOutputCardinality>
   </Relation>
</LogicalPlan>
</Relation>
</Plan>
Regards
Raj

Hi,
To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
Please go to version 74, if possible.
Regards,
Michael

Error while creating web dynpro project from DTR

Hello,
I am getting following error while creating Web Dynpro project from DTR,
org.eclipse.jdt.core.JavaModelException: File /<track name><DC><package>/.classpath is read-only.
Still project gets created but evenif I check out view , it does not allow me to edit it.
Also I have checked in and activated some changes but active copy in DTR is not reflecting those changes.
I tried Add subtree option in DTR perspective for folders in this project. Is it result of that?
Please help me in this regard.
Thank You
Beena

Hi Beena,
.classpath file should not checked in to DTR(uncheck the Read only properties). It is local file it contains class path for local system.
Generally in webdynpro project only src folder should be checked in DTR.
Regards
Suresh

Error while doing GR for scheduling aggrement

Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
Prasad

Hi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you

Error while doing AIAB Settlement

Hi I am facing the below error while doing AIAB during AUC settlement. Please do the needful.
Data for determination of capitalization not managed in area 01
Message no. AW507
Diagnosis
You have chosen a depreciation area, which does not carry the depreciation data from table COEPBR.
Procedure
Choose a different depreciation area.
Thanks
KC

Hi,
This message could be helpful:
Error AW507
Please check the field T082AVIEWB-AUTHORITY. If it is not on 2 this is the reason.
In this case, you can change the value in T093-VIEW1 using the coding as per SAP note 29706 which you have already discovered. There will be no risk involved in changing this value.
regards Bernhard

Error while doing File to File Scenario

All,
I am trying a simple file to file scenario - where xi picks up the file from a location and maps the message and dumps it in another location.
I am Getting the below error while doing the same .........
Time Stamp Status Description
2009-03-30 14:30:24 Success Channel Test_send_cc: Send binary file "d:\input\input.xml". Size 203 with QoS EO
2009-03-30 14:30:24 Success Application attempting to send an XI message asynchronously using connection AFW.
2009-03-30 14:30:24 Success Trying to put the message into the send queue.
2009-03-30 14:30:24 Success Message successfully put into the queue.
2009-03-30 14:30:24 Success The application sent the message asynchronously using connection AFW. Returning to application.
2009-03-30 14:30:24 Error Attempt to delete file "d:\input\input.xml" after processing failed. Retry
2009-03-30 14:30:24 Success The message was successfully retrieved from the send queue.
2009-03-30 14:30:24 Success The message status set to DLNG.
*+2009-03-30 14:30:24 Error Transmitting the message to endpoint http://filip:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.*
2009-03-30 14:30:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Mar 30 14:35:24 GMT+05:30 2009.
And i cant see the meesages using the SXMB_MONI trasaction
please help me resolve ths issue
Regards,
Mahesh.
Edited by: mahesh uma on May 3, 2008 2:12 PM

Hi Uma,
Go through this links::
Hope these links are useful to you..
Urgent: Message not transmitted from AFW to Integration server
Error with huge file
File to JDBC error
Thanks,
Satya Kumar..

Error while doing MIRO-Overflow for arithmetical operation (type P) in prog

Hi ,
I am getting the error while doing the MIRO as below-
Runtime Errors         COMPUTE_BCD_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
Date and Time          20.05.2009 10:07:03
Short text
     Overflow during the arithmetical operation (type P) in program "SAPLMRMC".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLMRMC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
      caught in
     procedure "MRM_AMOUNT_QUANTITY_PROPOSE" "(FUNCTION)", nor was it propagated by
      a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
Please let me know how can this be removed.

Hi,
There can be some problem with tolerances set in the customizing.
In my case, I was getting this error because of delivery date variance. The difference between delivery date maintained in PO and invoice date was huge and hence the multiplication of price of PO and difference of delivery date was huge and that was the reason for error.
Similarly in your case also, there will be some tolerance limit problem.
Please check your tolerance limits set in customizing.
Regards,
Mihir Popat

Error while doing J1IH (Excise JV) - TR6 Challan posting

I am getting the following error while doing, J1IH (Excise JV) - TR6 Challan posting
Please assist....
Short text
    The COMMIT WORK processing must not be interrupted.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLFACS" had to be terminated because it h
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    During the COMMIT WORK statement, the following are executed:
    - the routines registered with the statement PERFORM .. ON COMMIT,
    - the registered methods for the events of the object services
      and
    - possibly the local update (SET UPDATE TASK LOCAL).
    An exception was raised and caught. The normal sequence of the routines
    was interrupted by this resulting in the program being continued before
    the call of COMMIT WORK. As this can lead to inconsistencies, the
    processing cannot be continued in the normal way.

Thanks Milind...
I am also getting the following error:
Balance in transaction currency
    Message no. F5702
Diagnosis
    A balance has occurred in transaction currency 'INR' with the following
    details:
    Exchange rate '00', amount '       500,000.00' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling
    application.
System Response
    Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please assist

Industry error while doing replication of customer from R/3 to CRM

Similar Messages

Maybe you are looking for