Industry sector in material master
Dear all,
May I know what are the guide lines to select Industry sector to configure material master.
What are all the SAP standard Industry sector available?
Can we use any indutry sector for any type of business. How to choose this.
please advise.
Thanks
Udaya
Hello Udaya,
Branch of industry.
The industry sector groups together companies according to their activities (for example, plant engineering and construction, mechanical engineering, the chemical industry, and the pharmaceutical industry).
Table-driven program support is provided according to industry sector; for example, for the selection of data fields on-screen, for the sequence of the screens, and for the allocation of a material to a material type.
Industry Sector :
Key that specifies the branch of industry to which the material is assigned.
Use
When you create a material master record, the industry sector you specify determines
which screens appear and in what order
which industry-specific fields appear on the individual screens.
Thanks
Geeta
Similar Messages
-
How to modify industry sector of material master data
dear all:
i have already created a material master data using a wrong industry sector through tcode MM01.
and i have created BOM&ROUTTING for this material.
now ,i want to modify the industry sector of this material.
what should i do for this case?
thank you!
best regards!Hi,
Industry sector is at client level & once you create the material you can't change the industry sector.
However, if you have debug rights then you can change it directly in the table MARA with field MBRSH.
Hope your query get resolved.
Thanx -
How to keep Industry sector and Material Type in Display for Tcode MM01
How to keep Industry sector and Material Type in Display for Tcode MM01( create material Initial screen)
Thanks,Hi
Yes, your requirement is possible using screen variant
1. use tcode SHD0
2. give transaction as MM01
3. goto screen variant tab - assign some name - enter program name and screen name
(from mm01 - F1 help)
4. goto transaction variant tab - assign some name - assign already defined screen variant name
5. goto standad variant tab - transaction variant name already fetched automatically - click on active button (it was placed after transaction variant name
Raju -
How to find Industry sector and material type of created Material
I have created a material by choosing Industry Sector and Material type as "Retail" and "Finished Product".
After creating the material I want to know, what is Industry Sector and Material Type of the created Material?
Please provide the corresponding T-code or solution.
Thanks in ADVANCE.hi
for single material
u can go to mm03 material then basic data1
then click i icon in blue
u will get all details
for range of materials
go to se16
ive table MARA
then enter
go to settings >field selection here select
MTART Material Type
MBRSH Industry Sector
and then click ok
then execute
u will get list of material with ind sec and mat type
regards
kunal
award if helpful -
Industry Sector and Material Type list of values in cFolders
Hi,
How to transfer the List of Values for Industry Sector & Material Type from R/3 to cFolders system?
We have R/3 Production system running for the past 3 years. We are implementing cFolders now. While Material creation in cFolders, the List of Values listed for above mentioned fields are not as per R/3 values. Hence we need to change the same LOV in cFolders as per R/3. How to do it?
Prasanna
9036129381.Hi,
The parameters material type and industry sector are used
to classify a material. They define its possible uses.
For example if you selct indutsry type as retail or mechanical it will classssify the material accordingly. again material type is semifinished then this you can also use as a raw material. In mm02 or MM03 u cant see it.
If you want to see these you can go to SE16 and put table name MARA and can see it.
Hope this will help.
Reward point if helpful.
Thanks,
Raja -
How to un hide Industry type in material Master - mm01
Dear All Experts
Kindly help to unhide Industry Type field in Material Master .
Regards
AlokEdited by: Sridhar Jayavarapu on Aug 4, 2011 5:17 PM
-
BAPIs for populating Industry Sector and Material Type dropdowns
Hi all,
I have a requirement to create WebDynpro appliation,
which is the replica of MM01 Transaction page.
In the first page i want to populate Industry sector
values and Material Type values in 2 dropdowns.
Can anyone please tell me what are the BAPIs i need to
call and how to find the required BAPIs?
ThanksYou can use the function module RFC_READ_TABLE. The tables that you need to read are T137 for industry sector and T134 for material type.
Regards,
Rich Heilman -
What is the concept of view in material master?
Hello sap gurus
Some quetions regarding Material Master
what is the concept of views in material master ?
what is determined by specifying industry sector in material master ?
To sell material which views are material are maintened in Material master?
Regards
AmitHi,
<b>Material master for finished ggods is related with SD, MM & PP departments</b>. If you carefully go through the various screens in MM record you will realize the importance of the respective fields and the department to which they belong.
<b>1.Suppose Base unit of measure</b> in Basic data 1 screen. The production people will keep the stock of the item using this UOM.
<b>2. In Sales:Sales Org.1</b> screen we have sales unit in which we will sell the material.
<b>3. Then we have the plant</b> data in which we enter the delivering plant. Also the taxes are determined from the plant so we have the settings for taxes also - whether this material is fully taxable/50% tax/Tax exempted.
<b>4. Then we have purchasing</b> screen in which the data like the purchasing group, variable units,etc are entered. This will effect the purchasing cycle when we are procuring a material from outside. This is related to MM.
<b>5. The we have MRP</b>, this is related to PP as to how to manufacture the product, the MRP type, the strategy group - whether it is MTO/MTS like that.
<b>5. Sales:Sales Org.2 screen</b> - Here we mainatin the account assignment group which is very important as far as the generation of the accounting document is concerned. This triggers the system where to post the value in which G/L account. Accounting document is generated when we create the invoice in VF01 & save it.
<b>6. Work scheduling</b> - Related with the sceduling of the production as to whether underdelivery or overdelivery is allowed, the storage location
<b>7. Quality</b> - Here you can select for a particular finished item where where it has to be checked for quality during its journey from the raw material stage to the finished goods store as a finished item.
<b>8. Accounting</b> - Related to accounting, product costing, total value of the stock in hand, etc. Also related with FI & PP
So all the screens have data which effects one or more modules for the proper functioning of the system to give the optimum results.
<b>Industry Sector:</b>
Key that specifies the branch of industry to which the material is assigned.
<b>Use</b>
When you create a material master record, the industry sector you specify determines
1. which screens appear and in what order
2. which industry-specific fields appear on the individual screens
<b>Screens for Sales:</b>
Sales:Sales Org.1, Sales:Sales Org.2. But other screens also have data which is related to sales. You cannot just maintain the sales views and save the master. It has to be properly linked with the other modules also for the proper functioning of the system. That is why the system is called as "Enterprise Resource Planning" You have to paln the resources of your company and these resources are related with all the modules.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil -
Set Industry Sector filed as display field in Material Master
Hi folks!!
In MM01 material master creation, I want to make Industry sector field as only display field, can anyone help me how to do this.
Best regards,Dear,
Check this thread where explained in detail your requirement:
How to keep Industry sector and Material Type in Display for Tcode MM01
Regards,
Syed Hussain. -
In creation of material master
hi to all,
I have one issue regarding material master creation in in intial screen.
when i enter the material number, industry sector and material type it gives one error message as "record Z2 01 is not exist in table T133A" and message number as "M3748".
Regards
Raju.Hi
Are you experiencing this after upgrade?
This is something relevant to IS-oil.
However please go through OSS notes 918298 and 868771, you may get a clue.
warm regards
sairam -
LSMW--Create Material master data
Hi,
When I use LSMW to create material master data, I set up all step, but when I go to last step "13 Run Batch Input Session", there is error message like "Select at least one view" in moudle SAPLMGMM, screen 0070, anybody can tell me what is problem, thanks a lot.Hi,
This is due to error while recording for MM01,
Please do a Repeat recording and ensure that once the material number, industry sector and material type is entered, on the next screen you need to select all or at least a single view to create the MMR.
Regards
Merwyn -
How to create a material master with referrence to exsisting material maste
hi experts
how to create the material master with reference to an existing material master ?
please explain in steps
regards
jaiDear,
It is very simple.
Enter MM01 t-code.
Enter your existing material code in field of reference material code.
If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
After enter basic detail system ask you plant/storage location detail and view detail.
Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
Then click on all view, If you want to change some detail change it.
Due to reference material all detail is come from reference material.
Then click on save.
NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
Regards,
Mahesh Wagh -
Is business area and industry sector are same.
Hi All,
is company code is related to industry sector in any way???
is industry sector related thro business area then, or is business area and industry sector are one and the same.
Thanks
SathsihDear Satish,
Business Area - Organizational unit of external accounting that corresponds to a specific business segment or area of responsibility in a company. Movements in value entered in Financial Accounting are assigned to business areas.
Financial statements can be created for business areas for internal purposes.
The definition of the business area organizational unit is optional.
Business areas are used in external segment reporting (over and above company codes), based on the significant areas of operation of a company (for example, product lines, branches).
To define business areas, choose the following in Customizing for the Enterprise Structure: Definition -> Financial Accounting -> Define Business Area.
If you have defined business areas, the transaction figures for the G/L accounts are managed separately for internal evaluation purposes. You can therefore create internal financial statements for business areas.
If you want to create financial statements for business areas, you must make sure that the Business area field is ready for input in all the line items. To do this, proceed as follows in Customizing for Financial Accounting: Financial Accounting Global Settings -> Business Area -> Enable Business Area Balance Sheet.
To post items in a business area, enter the business area when you enter the business transaction. However, the business area can also be derived from other account assignments, such as the cost center. To enable the system to do this, you must define the business area in the cost center master record.
If you enter a cross-company code document, you can post to different business areas across all company codes in one document. As a result, any number of combinations of company code and business area are possible.
Industry Sector - When you create a material master record, you are required to classify the material according to industry sector and material type.
The standard system contains the following industry sectors. The ID used to identify the industry sector internally appears in parentheses.
· Plant engineering and construction (A)
· Chemical industry (C)
· Mechanical engineering (M)
· Pharmaceuticals (P)
The other sectors are for retail.
Regards,
Naveen. -
Label Data view in the material master
Hi all,
I read this SAP help portal that said "The Label Data view in the material master allows you to display or edit label data that is specific to the material. "..
may I know where I can find this view in the material master?
Thanks
KarenDear Karen,
This "Label Data" is one View in Material Master.
While creating the Material using T.Code MM01, when you are on the Selection screen of Various views, it is Last Option.
i.e. Lable Data
If this view is not there while creating the Material. then it is MM Configuration.
That view is assinged to Material Type.
See in Material Master, Industry Sector and Material Types controls these Views. So with the help of MM Consultnat you
have to get that View Configured to your Material Type.
If you find my answer satisfactory, please grant me the points.
Regards,
Amol Joshi -
Batch Management appearing mandatory in material master
Dear Friends ,
I am getting batch management tick mandatory while creating material master , In OMS9 for field sel grp optional 01 ,I have made field reference for mm01 as optional, but still its showing batch management mandatory while creating material master
Thanks in advanceHi,
If you have checked Field reference ROH ( as material created with material type ROM & ROH assigned Field reference ROH),the field selection group 75 optional entry.
Then , now check *Field reference for material master in assigned to industry sector( the material created with) in t.code: OMS3 and here also make selection group 75 optional entry for *Field reference for material master in OMS9
Also make selection group 75 optional entry in OMS9 for for Field reference MM01 & 0001
Now try creating material master.
Regards,
Biju K
Maybe you are looking for
-
We have written the following end routine but performance is too slow because of the number of loops. We have introduced the third loop since we need the records in the specific order to populate ZCUST. Can someone advise on how we can optimize Than
-
Can someone help with itunes, for some reason all of a sudden my iteunes will not open. It wants me to reinstall. I do not want to loose anything. My 2 children have itunes and they have a music list as well as many apps. please help???
-
How to list Deleted parked documents
Hello friends I have a question that I wait you can answer it. I need a report that shows the deleted parked documents. I have been trying through FBV3 and FB03 but don't show documents. I am currently working on a project implementation R / 3 versio
-
Scheduling Agreements-Intersting question
Dear Friends I would like to know whether scheduling agreements can hand purchase order numbers at item level & if so where is it inputted. Thank You Regards N.Rao
-
Security for Offline Interactive Form in Guided Procedure
Hi, I have a senario that require a form to be able to downloaded as an offline form from Guided Procedure with security mechanism. I know that Adobe interactive form able to contain scripting like FormCalc and Javascript. I was thinking whether is i