Industry solution and by product classification

Dear All ,
We had recived one SAP fresh implementation project , ie is for bio-chemical company . They have nearly one main product and 3 by product comes in between process . One main product has 6processing methods in that one of the basic raw material will change in each procss , my question is ,
1. Which industry solution will fit for this company?. Processing Industry- Chemical or something else?.
2. Whether we have to go for both baseline pakage + IS - Chemical both?
3.Which production planning we have to choose , Repetative , PP-PI or some thing else ?.
4. How to maintain by product in product structure and material master data ?
If you able to answer any of the above question , then plaese mail to [email protected]
Regards
Raghavendra

Hi,
Your client must have decided what he is buying- IS solution or R/3.
these are decided at the time of MOU itself in implementing partner and client.
every SAP product has a different cost.
Your Presales team or delivery head will have the details.
I am doing an implememnation where IS solution is also available but the client has choosen R/3 at the pilot phase.
Even SRM is kept for other phases.
I know this will not serve your purpose, my suggestion is you get in touch with the delivery team and go through the project scope document. I think your questions will be addressed
Regards
Rajesh

Similar Messages

Looking for a clone solution for Oracle WebCenter Content, Imaging and related products

Hi,
We are looking for a manual or automated cloning solution for Oracle WebCenter Content (UCM), Imaging (ICM) and related products. Oracle FMW has T2P cloning option, but we are looking for more specific to just this product to clone and configure (if needed). Any help is appreciated.
Best Regards

Hi
Assuming you have set up Purchasing with accrual method on receipt (and not on period end), you could enter the PO lines with receipt required. The receipt transactions you are uploading will generate the accounting to charge the expense accounts / or inventory valuation account.
There is no need to interface those also to Payables. In AP enter one invoice with the real monthly amount and match it to the purchase order level or to the receipts level. Approve and pay that invoice.
Dina

Activation of Discrete Industries and Mill Products in existing IDES system

Dear Sir,
I want to activate Discrete Industries and Mill Products in my existing IDES system (EHP4 FOR SAP ERP 6.0 / NW7.01)
Can some one help me with what steps i need to follow.
Also does it will effect the existing data in IDES....?
Thanks in advance .
Regards

Hi Sunnny,
Thanks for your reply.
as i checked in IDES , facility to activate the addtional packages are there.
with transaction SFW5, i can select the required package and activate it.
but during this process system is giving some warning,
*Note, that not all Business Function Sets or Business Functions provided with SAP ECC 6.0,might be covered by the respective customers' license and maintenance agreement. Use of and access to said software components provided with SAP ECC 6.0 may be subject to additional fees and conditions as stated in SAP's then current list of prices and conditions.
Caution: When you activate an industry solution, this results on the following restrictions on your system. Note that you cannot generally combine one industry solution with other industry solutions or add-ons. Furthermore, an activated industry solution cannot be deactivated. The release strategy note for the desired industry solution can be found in note 838003. The release strategy note contains a reference to the installation note. Read the note on installing/activating the industry solution before beginning activation*
so i want to know what will happen if i click I agree for this warning message.
just by following this process its possible to activate the required bussiness function...?
Thanks
Regards

How to find Industry sector and material type of created Material

I have created a material by choosing Industry Sector and Material type as "Retail" and "Finished Product".
After creating the material I want to know, what is Industry Sector and Material Type of the created Material?
Please provide the corresponding T-code or solution.
Thanks in ADVANCE.

hi
for single material
u can go to mm03 material then basic data1
then click i icon in blue
u will get all details
for range of materials
go to se16
ive table MARA
then enter
go to settings >field selection here select
MTART Material Type
MBRSH Industry Sector
and then click ok
then execute
u will get list of material with ind sec and mat type
regards
kunal
award if helpful

How can we configure or use SAP industry solution in ECC IDES

Hi
Hope all are fine and having a nice time. i have read almost all posts relating to above topic, i want to ask from you people, is there any way to use multiple industry solutions in IDES system? because IDES is a learning solution not production and it should open all learning areas. I have seen mant posts but transaction "SFW5" doesn't fullfill our requirements.

Thanks a lot Bill for your kind answer
i would like to know that how can we active desire IS during IDES installation? because while we install ECC IDES, there is no option to active desired IS. by default it set to FI/CX.
Thanks
Usman Tufail

Tcode for planned production and actual production

Hello,
I am working with a report I want to check the values with R/3 for Planned Production and Actual production. Does anybody have any idea how to check?
Thanks in advance

Hey Suman,
i have the same problem, did you find a solution?
thanks

Enabling Installation of CS3 and CS4 products that will not install on Windows 7 64Bit.

Adobe installers are not known for their helpful or forgiving ways & I have more than once had to reinstall Windows when installation of CS3 and CS4 products has failed with patently inscrutable errors.
The background to the current issue that I was attempting to install PS CS4 on a W7 system which already had CS CS3 installed. The CS4 installer threw up inscrutable messages indicating that the installation could not proceed and to contact Adobe (they are joking right ? Their phone & web support is notoriously UN-helpful).
After reading through threads suggesting that I uninstall CS3, apply CS3 and CS4 cleaning scripts I was in exactly same position I have found myself in on least 2 occasions with WinXP. By this time I couldn't event get CS CS3 to reinstall!
Then I decided to review the event log and found a number of installer events thrown up by the Adobe installers resembling "Error 1402. Could not open key: UNKNOWN\Components\xxxxxxxx".
I tracked down this very helpful solution which allowed me to change the registry permissions on the parent key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\ Components and propagate the new permissions down to the child keys.
http://www.okino.com/conv/changing_windows_registry_permissions.htm.
My advice is to follow instructions for "A More All-Encompassing Solution" and propagate the permissions right down to all the child keys as I could see a number of separate adobe installer errors in the event log. Also note the instruction to change the Owner from 'System' to 'Administrators' in Advanced settings. This is necessary in order for the Permissions change to be accepted and replace all the child object permissions.
As with most registry changes good advice to backup your registry hive first (although I didn't; by this time I was already expecting to have to reinstall Windows) and restart your system after making the registry changes before attempting to install / reinstall CS3 or CS4 products.
Hope this solution works as well for others as it did for me as the Adobe support on this issue has been next to useless.
[P.S. Q: Did you hear the joke about the guy who worked on product installation at Adobe rocking up at job interview with 'Adobe Installation Project Team' on his Resume? A: That that is the joke! If you wanted another job in installation development you would hardly admit to experience at Adobe ;)]

John Joslin wrote:
We don’t want people messing with the registry when they don’t need.
My apologies John I didn't realize that I was addressing the official custodian of Photoshop.
Incidentally my advice is intended for others in a similar situation who find themselves stalled during installation and otherwise contemplating a re-installation of Windows. I believe this would be obvious to most forum participants who had actually read my original post.

Windows 8 and Apple product compatibility

Good Morning,
The other day, I went to purchase a new Windows-based computer at a non-Apple retail store. I would purchase a Macbook, but budget limitations. When I asked what Windows computer would be best for basic usage (managing IPOD, managing IPADs, managing music, and basic computing), I was told that Windows 8 is not compatible with Apple products. The retail personnel said that he had numerous returns of products because their Iproducts were not syncing (in fact he returned his computer). I have researched the communities and found that there are numerous solutions and reasons for the problem, but the variation in the answers leads me to think that the core issue has not been addressed.
Question:
1. Has the compatibility issues between Windows 8 and Iproducts been corrected? If not, is there any news of the compatibility being addressed in a future release?
2. What is the exact problem and how can it be corrected if I do purchase a new Windows computer?
Thanks,
Brian

Hi urbwebb,
Welcome to the Apple Support Communities!
iTunes is compatible with Windows 8 and you should have no issue syncing any device to a Windows 8 computer. The Windows System Requirements can be found on the following webpage.
Apple - iTunes - Download iTunes Now
https://www.apple.com/itunes/download/
I hope this helps,
-Joe

Multiple Industry Solutions in One System

Hi,
Could anybody please confirm if multiple Industry Solutions can be turned on within a single SAP instance (e.g. CPG and Life Sciences)?
Thanks in Advance.
Regards,
Mahendra
Edited by: Mahendra Parachuri on Mar 28, 2009 4:06 AM

Hi,
Please click [Multiple Industry Solutions in One System|http://www.entegreat.com/eg_industrysolutions_casestudies_foodandcpg_mde.htm] for your reference.
With Regards,
Krishna.

How to use the rescue and recovery, and the product recovery discs ?

Hi everyone,
I've just recently became a new owner of a T61, and really enjoying it. I haven't had a chance yet to test-drive the lenovo phone support, as I have not yet screwed anything up that bad that required their help. I did try a clean factory reinstall from the service partition and it worked great. I would like to find out, how does one use the rescue and recovery startup disc, and the product recovery discs that I created myself? From my previous experience with Dell and HP, I only had to insert the first one and restart the computer, and the rest followed. But with ThinkPads, if I ever wanted to bring it to a clean factory state using those discs, do I use rescue and recovery first, followed by the product recovery? I'm curious, what is the difference between the two?
T61 (7658CTO), T9300, 3GB, 250GB, XP Pro
Solved!
Go to Solution.

blake_ibm wrote:
Hi! I'm blake
There is no diff between the two... One is on the Hard Drive and the other on CD/DVD.
Having the HDD version (pre-installed) is a good for trouble shooting. It uses a whole diff O/S on a whole diff partition (not C.
So if you are having problems and boot to RnR (via F11), and those problems go away. you know your issue is software related. If you still have the same problems probly Hardware related... IT IS AN EFFECTIVE WAY TO TAKE WINDOWS OUT OF THE PROBLEM.
Other then that. You can re-image another HDD from disks, you can't do that with the F11 version.
dose all that make sense?
Hi blake_ibm,
Thanks. All this makes perfect sense to me, but that's not what I'm asking for. My question is this: if I wanted to bring my notebook to its factory shipped condition using my recovery cd's, how do I do that? Do I insert cd1 first and then restart the notebook, or do I just insert it without restarting it, or perhaps I should use first the rescue and recovery?
You said that there is no difference between the two, but what two are you talking about man? I am not comparing cd recovery to partition recovery. I am talking about rescue and recovery cd, with system recovery cd's. These are the two things that I'm talking about.
I'm really grateful for all replies, but please people, read the question first !!!
I would really appreciate if someone could explain the steps involved in performing a clean factory recovery, using the cd's, and not the recovery partition. I just want to know for the future, in case one day I have to do it. That is all I'm asking.
T61 (7658CTO), T9300, 3GB, 250GB, XP Pro

HT204053 Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninst

Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninstall via the control panel my pc cannot find the route????? I do have an iphone and ipad. What can I do?

The CrashIDs are what is needed. Do not attempt to attach or paste the reports.
#Run Firefox in safe mode does that prevent crashes ?<br/>[[Troubleshoot Firefox issues using Safe Mode]]
#Disable all plugins
#Repeat and this time try in Windows safe mode. use the F8 key <br /> http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
So you are saying it works ok as long as you avoid certain pages such as this Forum. That makes me wonder if it could be malware that is blocking access to assistance.Run malwarescans with multipe and up-to-date tools.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Dynamic Recovery Solutions and odd DOFD

So I have a new collection on EQ Dynamic Recovery Solutions, and the OC is Checksmart. It was reported 7/2015 with a DOFD of 10/2014. Roughly 7 to 10 years ago, I was stuck in the payday advance loop and routinely got advances from Checksmart. So I was a customer at one point. I got my last advance probably over 7 years ago, and can't recall if I ever paid it back or not. There's a good chance that I didn't, since at the time I was going thru a foreclosure and moved across the country. My question is .. how can they have a DOFD of 10/2014 when I would have defaulted no later than 2008? I started a dispute on EQ's website immediately after learning of this .. should I do anything else?

When I look at EQ's online dispute tool, I see the following: Agency Address:135 Interstate Blvd Unit 6
Greenville, SC 29615-5720
(877) 821-1659 Date Reported:07/2015 Date Assigned:07/2015 Creditor Classification:Financial Creditor Name:CHECKSMART Account Number:3935XXXX Account Owner:Individual Account. Original Amount Owned:$481 Date of 1 st Delinquency:10/2014 Balance Date:07/2015 Balance Owned:$481 Last Payment Date: Status Date:07/2015 Status:D - Unpaid Comments:N/A

Developer licensing for CS and CC products

Hello,
I am trying to find information on obtaining developer licensing for older Adobe CS and current Adobe CC products.
I am a software developer and my software interacts with all Mac Desktop applications via Apple's Accessibility API. In order to ensure proper communication between my app and Adobe Apps, I need to be able to run Adobe Apps for the purpose of testing. Ideally, I am hoping that Adobe has a developer program or is able to (on a case-by-case basis) provide licenses to a developer either a) at a discount or b) do some sort of license trade. If anyone know who to contact or what options are available, I would really appreciate some assistance. I have looked at the Adobe developer programs and SDK's, but that is not what I am looking for. I am not developing add-ons for Adobe products but rather I need to test that my software works properly with the dozens of Adobe applications. As an independent developer purchasing licenses for all Adobe products is not an option. Additionally, I need to be able to test older versions of Adobe Apps such as the CS5 and CS6, so I need access to that software as well.
Ensuring compatibility of my Accessibility application with Adobe products has proven to be a nearly impossible task due to the inconsistent behavior of some Adobe applications. I put a lot of time and effort into making sure my software works with all applications and Adobe products seem to be the most troublesome. Most non-Adobe applications work perfectly with my application and it seems that every version of every Adobe app requires special coding within my app to accommodate Adobe apps. It would be great if Adobe could somehow accommodate my licensing needs.
Specifically, I am looking for answers to the following questions:
Does Adobe offer free/discounted developer licenses for the purpose of compatibility testing?
Does any Adobe developer program allow access to the entire Adobe product line going back as far as CS5?
Who do I contact at Adobe to discuss my needs and possible solutions?
Thanks in advance for any assistance.

In order to gain access to older versions you would have to have an existing license that entitle you to use them, but otherwise it's only Creative Cloud and a bit of CS6 from here on, with even CS6 phasing out. Since you are not developing actual Adobe software, this also severely limits your chances of being accepted into any Beta/ Developer program, but feel free to try:
http://prerelease.adobe.com/
Note that there is no global CC program and the applications are handled individually for every app. It's entirely up to the teams to let you in or kick you out.
Mylenium

Industry Solution for High Tech Manufacturing - how to activate?

Hello,
I'm Basis consultant installing ECC 6.0 at a client site. The client company has purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ."
My question is: how is this installed? Is this part of ECC-DIMP, and thus can be activated after installation of ECC. If so, can this be activated and tested in a newly created client copy, or does the activation need to take place prior to a client copy?
If not part of ECC-DIMP, does this purchase refer to Best Practices for High Tech, which does require additional software. In this case I believe I will need to install the Baseline package for BP, then the specific BP for High Tech.
Follow-up question:
1. Could either of these be installed later, or would that break existing new configuration?
Thanks in advance for your help!
Glen

Hi Glen, I just saw your posting from two months back and wondered if you had gotten your answer, and if by saying that the client had purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ", did they mean SAP Best Practices for High Tech?
Please let us know if you have any questions,
Marian

Implementing IM&C Industry solution in BW

Hi All,
We are trying to implement Industrial Machinery and Components Industry solution in BW.
but standard sap business content is not available for this Industry.
IM&C is similar to Automotive industry. can i use the Standard Automotive BI Content for IM&C by adding some custom development.
Please suggest anyone is having idea on this IM&C Template.
Thanks and Regards,
Sasi.

Hi HJ,
The Industry best practice information can be found at http://service.sap.com/bestpractices.
The bill of materials for SAP ERP can be found in the SAP ERP master guide (http://service.sap.com/instguides). You will see this guide that almost all of SAP NetWeaver is shipped with the SAP ERP software.
With regard to licensing you typically get licensing of all the SAP NetWeaver capabilities needed to configure, deploy and run the SAP ERP application solutions. You typically not do get licensing for integration of SAP ERP and non-SAP ERP applications/technology - this requires additional licensing. Your SAP Account Executive will have more information for you.
Cheers,
Mike.

Industry solution and by product classification

Similar Messages

Maybe you are looking for