Industry Solution for High Tech Manufacturing - how to activate?

Hello,
I'm Basis consultant installing ECC 6.0 at a client site. The client company has purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ."
My question is: how is this installed? Is this part of ECC-DIMP, and thus can be activated after installation of ECC. If so, can this be activated and tested in a newly created client copy, or does the activation need to take place prior to a client copy?
If not part of ECC-DIMP, does this purchase refer to Best Practices for High Tech, which does require additional software. In this case I believe I will need to install the Baseline package for BP, then the specific BP for High Tech.
Follow-up question:
1. Could either of these be installed later, or would that break existing new configuration?
Thanks in advance for your help!
Glen

Hi Glen, I just saw your posting from two months back and wondered if you had gotten your answer, and if by saying that the client had purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ", did they mean SAP Best Practices for High Tech?
Please let us know if you have any questions,
Marian

Similar Messages

  • SAP industrial solution for Mining (IS-Mining)

    Dear Experts,
    I believe that SAP has industrial solution for Mining (IS-Mining). Do they have BW analytics / Reports for the IS-Mining ?
    Appreciate an early response.
    Thnx n Rgrds
    Mohan
    Edited by: Mohan Kumar on Nov 4, 2008 7:39 AM
    Edited by: Siegfried Szameitat on Nov 5, 2008 10:12 AM
    Edited by: Mohan Kumar on Nov 6, 2008 1:26 PM
    Edited by: Mohan Kumar on Nov 6, 2008 1:26 PM

    Can some one pls reply on this.
    Edited by: Mohan Kumar on Nov 17, 2008 6:05 AM

  • Is there a solution for Higher Ed Computer Labs?

    I am an instructional Technician for the Photography Department at a Community College. We currently purchase and use the Creative Suite 6 Design & Web Premium here in the Photography, Graphics and Journalism departments. We have over 150 Macintosh computers licensed with your product and we are very interested in the Creative Cloud.
    Currently we purchase the licenses for all of our student and faculty computers, we are hoping that you will be developing an education solution for computer labs like ours.
    What we would like to see is an arrangement that would allow our students to subscribe to the Creative Cloud for a three-month period that would be paid for prior to the first day of classes. This would avoid classroom disruptions from students failing to pay if the subscription was on a month-to-month basis.
    While I understand that the current Student and Teacher edition at $19.95 is a limited promotion, a price of $20–$25 per month or $75 for a three-month period would be less than the cost of a textbook and could be easily charged as a class fee.
    A potential problem is that students sometimes do not use the same computer all the time. If students are taking multiple classes in different labs, they need to be able to access the programs on several computers. I am currently subscribed to the free trial month and my impression is that the subscription is dependent on logging in with an Adobe ID. If this is the case, students should be able to use this log in to access the software they need on whatever computer they are at as long as they have an active (paid) login, and are not logged in on another computer.
    As it is everywhere in education, our program budgets are tight. The Creative Cloud would allow us to save a significant amount of funds while still offering the most current technology to our students and faculty. The ability to access any software we need and allowing students the ability to access the programs at school and at home will empower both our faculty and students. Additionally, the availability of cloud storage will allow students to work on files at home and at school seamlessly.
    I am making several assumptions:
    Pricing –
    Student and faculty pricing will be available.
    A price will be established for a three-month period to facilitate a college semester.
    Access –
    Students will be able to access the programs on more than one lab computer.
    Is access controlled by logging in with an Adobe ID?
    Once the software has been installed on a computer, will any student with an Adobe ID be able to access it?
    We are hoping to be able to implement this by next fall, so I am anticipating that these details will be worked out before then.

    Great to know this I will be sharing it with my professors also.  To have the "team" version would be great!  Many problems occur for students with portable storage units.  The worst is forgetting to download a project and take it with you. which really hurts our timing on a project to completion.  Also as the projects grow in size we can end up with storage issues as some files are very large.  This sounds like a grand solution.
    Thank you for answering my question earlier Mr. Rice.  Now I need to get back to my assignments. bye.

  • SAP industrial solution for Aerospace & Defence (IS-AD)

    Hi,
    We are implementing MRO as part of IS_AD with a specific focus on the Logbook that is generated. I have found the content on the BI side as well as all the relevant DataSources, but for some reason they are not visible in RSA5 or cannot be activated in SBIW or anywhere else for that matter. I realize that it could be an arbitrary question, but does anyone know where the DataSources on the ERP side is so that i can replicate them?
    Please advise...
    Thank you,
    Cas

    Thanks for all the views, but no replies...
    I found the answer. If you need to know where they are, contact me and i will gladly share the info with you.

  • QuickTime Plug-in for Chrome under OSX: how to activate?

    How do I activate Quicktime plug-in on Chrome running under Yosemite?
    QuickTime is obviously installed on my Air because it runs e.g. with Safari.
    Surely I don't have to re-download QT?
    Chrome: Version 39.0.2171.95 (64-bit)
    Quick Time Player: version 10.4

    Thanks. 
    Since my first post, I found this related question on the Chrome discussion: https://productforums.google.com/forum/#!forum/chrome/chrome/pDZUWUXgKIQ
    An answer from the Chromium team is at https://code.google.com/p/chromium/issues/detail?id=437565.
    Basically QT is 32-bit but Chrome is 64-bit and the Chromium team don't intend to fix it.

  • I forget the password for my apple account how to activate the IPad?

    Dears I forget the password for my apple account and I reset my Ipad but still asking for the previos user and password to activate the IPad?

    Is the iPad asking for the password to your Apple ID or to a previous owners ID? If you are trying to activate an iOS device and it is asking you for a previous owners Apple ID and password you have encountered the Activation Lock. You must enter the previous owner's Apple ID and password or contact the previous owner and ask them to erase the device and remove it from their Find My iPhone. If you purchased this device used, return it and ask them to clear the device or request a refund. Without the original owner's Apple ID and password you will never be able to use the device and no one here can help you activate it.

  • Channel Management u2013 High Tech Integration

    Hi All,
      Right now we are working on Implementation for High Tech Channel Management. Can any one Help me How we integrate CRM with R3 for High Tech Scenarios.
      As per I know when a Transmission message ( Tcode - CMS_TM ) comes in thru EDI, I need create a Delivery/Billing for credit memo request in R3 when it is released. I donu2019t know the Complete process.
      My main Question is how we integrate this process with CRM to R3. Do we use CRM Middleware to do this? If so, what Replication Object we use for this in CRM. Currently I have found a Publication 'All CMS contracts (MESG)' with BDoc BUS_CMSCON_MSG will it support Channel Management High Tech scenario (Process which I mentioned above).
    Kindly advise on this as I am new to High Tech Channel Management. It would be appreciated if you able to explain me the process of Resale & Claim Transmission and Price Bucket and its backend Integration Details.
    Thanks in Advance

    You might find some information in this document:
    <a href="https://service.sap.com/~sapdownload/011000358700000876192006E">SAP High Tech - Business Suite 2005 - Master Guide</a>
    Tell me if you can't download it using this link. I can mail it to you.
    Regards,
    Kaushal

  • Which solution for better perfomance?

    I'm writing java application based on XML. This application have to store very large XML file into DB (XML file is about 1000MB large). My solution is to divide it into smaller (100MB) parts (because of memory resources) and store it in DB. I have one XMLType table based on object-relational storage (so at the end there will be 10 rows each of 100MB size).
    XML file looks like:
    <students>
    <student id="1">
    ...// 5 nested elements or collections of elements
    </student>
    <student id="2">
    </student>
    <student id="3">
    </student>
    </students>
    </students>
    Now I need to get java object Student which correponds to <student>element. My solution is to select whole <student> element and use JAXB to convert it to Java object. While solving a problem with selecting <student> element (just in case you know a solution for my another problem: How to select specific element from a XML document using JDBC? another question raised in my mind.
    Which solution has better performance when I don't need to select relational data but I'm interested in xml fragment?
    1) Use object-relational storage
    2) Use CLOB storage
    As I figured out object-relational storage is better for selecting data like student name. But is it also better when I need whole xml fragment?
    Isn't my solution completely wrong? I'm quite a newbie in XML DB so it's possible that I missed better solution.
    Thanks for any advice

    I don't know which version you have regarding 11g, but probably in this case I would go for a table with a XMLType Binary XML column. To make xpath and other statements perform use Structured or Unstructured XMLIndexes to support your queries. The following has worked for far smaller XML documents but the millions we used were good for a total of >> 1 TB total storage size...
    CREATE TABLE XMLTEST_DATA
    (    "ID" NUMBER(15,0),
          "DOC" "SYS"."XMLTYPE"
    ) SEGMENT CREATION IMMEDIATE
    NOCOMPRESS NOLOGGING
    TABLESPACE "XML_DATA"
    XMLTYPE COLUMN "DOC" STORE AS SECUREFILE BINARY XML 
    (TABLESPACE "XML_DATA"
      NOCOMPRESS  KEEP_DUPLICATES)
    -- XMLSCHEMA "http://www.XMLTEST.com/Schema1.0.xsd"
    --  ELEMENT "RECORD" 
    DISALLOW NONSCHEMA
    PARTITION BY RANGE(id)
    (PARTITION XMLTEST_DATA_PART_01 VALUES LESS THAN  (100000000) TABLESPACE "XML_DATA" NOCOMPRESS
    ,PARTITION XMLTEST_DATA_PART_02 VALUES LESS THAN  (200000000) TABLESPACE "XML_DATA" NOCOMPRESS
    ,PARTITION XMLTEST_DATA_PART_03 VALUES LESS THAN  (300000000) TABLESPACE "XML_DATA" NOCOMPRESS
    ,PARTITION XMLTEST_DATA_PART_04 VALUES LESS THAN  (400000000) TABLESPACE "XML_DATA" NOCOMPRESS
    ,PARTITION XMLTEST_DATA_PART_05 VALUES LESS THAN  (500000000) TABLESPACE "XML_DATA" NOCOMPRESS
    ,PARTITION XMLTEST_DATA_PART_06 VALUES LESS THAN  (600000000) TABLESPACE "XML_DATA" NOCOMPRESS
    ,PARTITION XMLTEST_DATA_PART_07 VALUES LESS THAN  (700000000) TABLESPACE "XML_DATA" NOCOMPRESS
    ,PARTITION XMLTEST_DATA_PART_08 VALUES LESS THAN  (800000000) TABLESPACE "XML_DATA" NOCOMPRESS
    ,PARTITION XMLTEST_DATA_PART_09 VALUES LESS THAN  (900000000) TABLESPACE "XML_DATA" NOCOMPRESS
    ,PARTITION XMLTEST_DATA_PART_MAX VALUES LESS THAN  (MAXVALUE) TABLESPACE "XML_DATA" NOCOMPRESS
    CREATE INDEX test_xmlindex on XMLTEST_data (doc) indextype is xdb.xmlindex
    LOCAL
    parameters ('GROUP PARENTINFO_GROUP
                 XMLTable test_cnt_tab_ParentInfo
                ''/RECORD/ParentInfo''
                COLUMNS
                 GroupingID01 VARCHAR2(4000) PATH ''Parent/GroupingID'',
                 GroupingID02 VARCHAR2(4000) PATH ''Parent/Parent/GroupingID''
              ');

  • I have my Adobe ID and the Adobe Digital Editions. But when I download an EPUB-ebook, I don´t see the ebook or "My Digital Editions-Bibliothek".What is the solution for this problem?

    @I have my Adobe ID and the Adobe Digital Editions. But when I download an EPUB-ebook, I don´t see the ebook or "My Digital Editions-Bibliothek".What is the solution for this problem?

    how can we solve the problem?
    I have my adob.e ID, downloaded Adobe Digital Editions.
    Whren I download EPUB-ebooks and want to use
    Digital Editions, nothing happens and appears!??
    Please give me a short feedback and help

  • Software Provider(High Tech Industry) SAP solution!!!

    Hi All
    I need information (domain knowledge) for Software Provider Industry under HIGH TECH. how they work , what is their business, how SAP useful for them etc etc.
    if any of you having anything related to this please share ..its urgent..
    regards
    Yogesh

    I am also searching for same documentation, till now I got this pdf http://www.sap.com/netherlands/industries/hightech/pdf/50055230.pdf
    Regards,
    Nitin

  • How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance. Of a sledgehammer, open the device and attempt to recover your files by force!???

    How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???

    Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
    Then use a screwdriver to remove the 10-12 screws to open up the case.

  • Manufacturing Solution for Textile Industry

    Hello Everyone,
    Can anyone share his/her experience of manufacturing solution for a textile industry. A Towel manufacturing company is interested in using Oracle's Standard Solution for manufacturing.
    There manufacturing process starts from Weaving, they do not manufacture Yarn and the end product is Towel of different sizes, colours and grades.
    The main question is Which product family should be implemented Discrete or Process and which modules of that family?
    Thanks in advance.
    Israr Ashfaque

    Hi
    You need to use a seperate Nomenclature for all the Finished products, which are uniquely identified. This is possible with Oracle Inventory module.
    Like 9999999colxyz
    Numeric represent year/mont/date (if reqd)
    Col represents Actual color of thread/wool
    xyz represents Any other attribute of the thread/wool
    So you can use this kind of Item codification for better tracing and marketing.
    Thanks
    Raj
    NTT Data

  • Forum for IS-High Tech

    where can i find a forum with topics related to IS-High Tech.

    Hi Yara,
    We don't have moderators or critical mass yet for to have forums for all industry solutions.
    Please post your question in the brand new General Industry Solutions forum: Industries
    Once there are enough questions for an IS-High Tech forum we will create one and move the posts over.
    All the best, Mark.

  • How can we configure or use SAP industry solution in ECC IDES

    Hi
    Hope all are fine and having a nice time. i have read almost all posts relating to above topic, i want to ask from you people, is there any way to use multiple industry solutions in IDES system? because IDES is a learning solution not production and it should open all learning areas. I have seen mant posts but transaction "SFW5" doesn't fullfill our requirements.

    Thanks a lot Bill for your kind answer
    i would like to know that how can we active desire IS during IDES installation? because while we install ECC IDES, there is no option to active desired IS. by default it set to FI/CX.
    Thanks
    Usman Tufail

  • Good/robust/high performance solution for calling Java from C

    Hi,
    I am looking for a good/robust/high performance solution for invoking a local java component from a C application in Windows.
    About Java component:
    - It has multiple methods that would be called very frequently from C application
    - It will reside in local machine. This machine may not have access to internet/LAN.
    My preference is to implement this java component as indepent running exe and have C application make outprocess calls. Is this possible?
    Any help/suggestions on this are greatly appreciated
    Thanks,
    -Arun

    I will stop replying to this conversation, unless it
    remains professional and without getting personal.I suggest you read your replies again then since you were the one that strayed from the topic and referred to my competency.
    >
    Or conversely those that have been working with JNIfor close to 10 years >might have a different opinion
    that someone who is promoting a commercial >product?
    I cannot see anything wrong with sharing and letting
    people know of potential solutions that might help to
    solve their problems.Not a problem at all.
    You however stated an absolute. I asked you to back up that absolute with something that was objective.
    You then lashed out at me and questioned my competency.
    >
    So you are questioning my competence as well as myintent?
    And not bothering to address the question at all.
    I am guessing you haven't actually attempted tocompare JNI to on board >sockets but instead you are
    just guessing.
    Frankly, I don't see how a socket solution with
    process switching overhead is going to work faster
    than a direct method call, passing parameters over
    the stack, the whole operation taking place
    in-process.
    And thus, as I thought, you haven't actually attempted to compare the two.
    And in terms of competency I can only wonder if youare competent enough
    to write the test frameworks that would demonstrateone or the other.
    As said earlier, there is no need to get personal,
    let's keep professional!
    And as I said earlier I would suggest that you look to your own replies.
    As mentioned, I do have enough experience for those
    who need to interoperate with Java using JNI, and can
    show how to do it in a safe and productive manner.
    And as I have said for the third time now that has nothing to do with what I actually asked you.
    The code that someone writes via JNI has much lessusage, and thus is much >more likely to have
    problems. Even if someone is competent in creating
    JNI >and C code.
    Thus JNI Is less stable.
    And by the way that includes the commercial productthat you are promoting >as well.
    Expressing an opinion on a product just based on its
    underlying technology without proper evaluation
    doesn't sound like constructive criticism.
    So you are claiming that your product is in fact more stable than the VM or at least as stable even though it has had far, far less usage?
    The only thing that can be said about the product so
    far, it that a product that is in production for some
    years without any problems, has a certain level of
    reliability and quality, whatever the underlying
    technology might be, and that there is enough
    competency with JNI to produce it and advice about
    the technology.
    True. But you were the one that brought up unrelated issues and then, as best as I can tell, thought to challenge my knowledge by pointing out how VMs "really" work.

Maybe you are looking for