Industry specific Content installation

Dear Experts,
We need to create a reports using flat file related to Aviation analysis.We have the analysis things in infoObjects like Sector,Aircraft and Keyfigures like RPK,ASK and Load factor.My question is does i can get the BI content installation infoObjects and InfoAreas related to Aviation industry.
Regards,
Venkat P

Hello Venkat,
If I understand correctly then your trying to create application component in BW system under SAP R/3 Application Components and getting a Warning. If your receiving this warning in your development system then ignore this but my question is if your creating custom component then why create in SAP R/3?
Also you can check for the BI content objects if any from RSA1->BI Content and select appropriate objects - Info Objects, Info Cubes, DSO'setc. If you dont find then create custom objects
Thanks
Abhishek Shanbhogue

Similar Messages

SAP Installation ECC 6.0 Industry Specific

Hi,
Iam trying to install ECC 6.0 on Linux and MAXDB.
Can anyone guide me how to install Industry Specific components. Any references to documentation would be great. I found some but they are related to ECC 4.7
Message was edited by:
Phani Arava

Hi Phani,
They are many components in "Industry Specific components", which do you need ?
SAP DISCRETE INDUSTRIES
SAP FUNDS MANAGEMENT
SAP PH-ELR
You can find here :
https://websmp208.sap-ag.de/swdc
-> SAP Software Distribution Center
-> Download
-> Support Packages and Patches
-> Entry by Application Group
-> SAP Industry-specific Components
If you find the related package, you can install it via SAINT transaction.
Hope it help
- Yvan

SRM BI Content Installation

Hi Experts,
I need data flow of Objects from SRM(R/3) to BI SRM data target.
If any body involved in this. Please share the SRM BI Content Installation procedure apart from help.sap.com.
Advance Thanks,
BBC

Hi,
1. Down load BI_CONT (Depending on version) from SMP(http://service.sapc.om/downloads) OR You can check with DVDs given by SAP into SRM server.
2. Use Tcode SAINT (Latest SPAM/SAINT version) and Goto Application server-->Down laod BI_CONT in to SRM server
3. Select BI_CONT proceed with NEXT steps as usual(Do not change anything here).
Regards,
Srini Nookala

SharePoint Designer 2013 (2010 Platform Workflow) - How can I create a new list item with a SPECIFIC content type?

In SharePoint 2010 I created workflows that used the 'Create list Item' Action, which then set the Content Type ID (so I could create documents of various types in a document library).
We just switched to the SharePoint 2013 platform, and now the drop down for Content Type ID is blank in all of the workflows that are still using the SharePoint 2010 platform. Is there any way to create a list item with specific content
type? Even if I could just input a string into that field instead of using this blank drop-down. Please help!

Hi Sarah,
According to your description, my understanding is that you cannot create a new list item with a specific content type using SharePoint 2010 Platform Workflow.
I tested the same scenario in my environment, and the Create List Item worked fine with the specific content type.
How did you create the content type?
Please check if the content type is added to the list/library the workflow associated with.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

BI Content Installation issues due to compounding

Hi All,
I am on BW 7.4 and am facing some issues while trying to install a BI content cube.
One of the infoobjects of those cubes has a custom infoobject compounded to it and the BI content installation keeps on failing because the Delivered version of that cube doesnt have that compounded InfoObject.
For example 0COMP_CODE has ZXYZ added in compounding. Now I try to install a cube 0ABC having 0COMP_CODE.
System throws an error that cube 0ABC is missing infoobject ZXYZ and cannot be installed.
How do I get this cube to be installed so that I can manually put ZXYZ in it and activate? Please help.
Regards,
Shyam

Hi,
I think I am not clear on my question.
0COMP_CODE is already present. ZXYZ is already been created and is a custom IO.
ZXYZ had been added in compounding of 0COMP_CODE.
This means that whenever you use 0COMP_CODE in a cube/dso you will have to make sure that ZXYZ is also present. Or else that Infoprovider cannot be activated.
Now the problem is that when I try to install a BI content cube containing 0COMP_CODE system throws an error that ZXYZ is not part of the Infocube (obviously since it is a custom IO) and hence the entire cube installation fails.
Now my question is how do i get the cube to be installed at least in inactive state so that I can add ZXYZ to it and make it active.
Regards,
Shyam

Business content installation query

Hi Experts ,
i am installing PM Business content installation , while installing 0PM_C03 there is an infoobject 0EQUIPMENT which is existing in present system but of old version   and mst of the attributes are time independent
now i want to install   business content in such away that current 0EQUIPMENT should not be disturbed and business content version has attributes that are time dependant
Question is shall i install 0EQUIPMENT or not, and let the old version remain , as 0EQUIPMENT is under use at few places
secondly if i dont install in future will there be any problem in loading PM data .
Please Advise,
Thanks in Advance,
Nitya

HI,
hi,
use the option Match (X) or copy.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if:
¡        The match indicator is not set, and
¡        The install indicator is set.
In other words, the delivery version is copied to the active version.
Note
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
For more info search in forums or check the sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Regards
KP

How to check RBS maintainer is running or not and how to stop the RBS maintainer for a specific content db.

HI
how to check RBS maintainer is running after deleting orphan blobs and while deleting the blobs from rbs storage,
and also how to stop the RBS maintainer for a specific content db.
when I run below query I found the orphancleanup value true
SELECT [config_key],[config_value] FROM [mssqlrbs_resources].[rbs_internal_config]
where config_key='orphan_cleanup_in_progress'
adil

HI
the RBS maintainer was run from one of web front end server And for one content database , that fine
but I now know this information only this did by other administrators.
Now I did not found this Maintainer running in windows task scheduler, but blobs are decreasing from content database RBS storage folder, and　 also I found this maintainer running I checked from when　 run sql queriy in 　sql
server
SELECT
[config_key],[config_value]
FROM
[mssqlrbs_resources].[rbs_internal_config]
where
config_key='orphan_cleanup_in_progress’
it 　given me true
here now I want to stop this orphan cleane up , what settings and script I will run?
adil

Business Content Installation with Remote Activation

Hi
During Business Content Installation, BI system attempts to do Remote Activation in the Source System
But in my case, it's searching for the datasources in the ERP source system instead of the CRM system
How do I get the Business Content to look into the right CRM system
Also, do I have to manually build the transfer rules of InfoSource to DataSource ? At the moment, I don`t have InfoSource automatically mapped to DataSource

Hi, before collecting the datasource to the right you have to select the source system by one of the following ways:
1) press Shift F7
2) click on the source system icon on top
3) goto menu Edit->Source system assignment
About your secod question check if the BI content already has a mapping defined if not you have to manually create the mapping.
Best Regards,
Brindha.

Different Problems during Business Content Installation in BI 7.0

HI GURUs,
          I'm working on BI 7.0. Here I'm trying to do business content installation and facing the following problems.
Question 1:
          Let's say when I'm trying to install 0MATERIAL infoobject
Scenario 1:
( with Necessary Objects as Grouping), the job is finishing succesfully, but when I look for 0MATERIAL in Infoobjects of Modelling it is found in Unassigned characteristics Node where as it should have been in 0MMIC_CHA01 Catalog & secondly it's not in Active state. When I tried to manually activate it I'm getting the error stated in Fig 1b of attachment.
When I tried for Object Maintanance of 0MATERIAL in Business Content Screen i'm getting the same error (Fig 1a & 1b).
Scenario 2:
(_with Dataflow before and afterwards as Grouping_). In this scenario i'm getting the issue shown in fig 2. I would like to understand why this issue is popping up, specially the source system issue.
Note: The Figures are found in the file attached with this link.........
           [Bi Content INstallation Error Doc|http://rapidshare.com/files/269891244/BI_Content_Installation_Errors.doc.html]
Question 2:
         Why are many of the infoobjects like 0Customer, 0Material etc getting assigned to Unassigned Characteristics instead of getting assigned to their respective Characteristic catalogs.
Note: It would be much more helpful if the solution is provided with reference to SAP Note, though alternate solution is always welcome.
       Hoping for a early optimistic solution.
Regards,
Syed Shujaath Ali.

Hi,
Maintain the material number length in your BW system, tcode- OMSL. Due to this you are getting error, conversion settings are not found for 0material. Check in your source system, what is the material number length has mantained by functional team.
It will sove your issue.

Are there any Textile industry specific data targets?

Hi,
Are there any Textile industry specific Infocube's, DSO's available?
Thanks in advance
Edited by: harish reddy on May 13, 2009 11:30 AM

Pls see if this is helpful:
http://help.sap.com/saphelp_nw04/helpdata/EN/9f/27443cbe062e59e10000000a114084/frameset.htm
rgs,
Parth.

Industry specific verticle for Process Industry

We have implemented MySAP ECC 6.00 in our company. Our company produces BOPP Film. We have implemented 6 modules FI,CO,PP,MM,SD and QM. In PP modules we stuck because of width. I want to ask whether there is any industry specific solution for Process Industry?
Sudhir

Hi Sandeep,
Thanks for your prompt reply.
I will explain you in detail.
Our Company was started in 1980 to manufacture Bi-axially Oriented Polypropylene Films (BOPP) for the first time in India. Since inception we have maintained market leadership in the Indian market and also Continues to be largest BOPP film exporter from the Country. .
In 1996 we have implemented AVALON erp. The implementor was TCS Hyderabad. Presently also it is running very fine but due to technical cnstraints, we decided to switch over to SAP.
We are in process of implemening MySAP ECC6.00. Implementor is WIPRO. As our company is a Continious process industry we expect to implent the PPPI module.
As far as our process is concerned first stage to produce a JUMBO roll. The width may be 1000 mm. Further these Jumbo rolls are slitted as per requirement from customer. Here the width part plays a major roll. The requirement from customer is in any width right from 64 mm to 500 MM. Let us say our product code is xyz with various width. Our main requirement is widthwise stock and widthwise costing. We do not want to incorporate the width in itemcode. How can this problem will be solved?
Waiting for a feseable solution.
Thanks Sudhir

PM business content installation

Hi Experts,
i have to start on Plant Maintanance Business content installation , Could any one provide me the data flow , what are tha data sources, first do i have to activate daatsource and replicate then activate cubes etc .
Also could any one provide me details about PM and QM Integration
Thanks In Advance
Nitya

HI ,
You can find the BI content delivered objects for PM in the below link
http://help.sap.com/saphelp_bw33/helpdata/en/b0/e3163d5abd752de10000000a114084/frameset.htm
Regards,
Sathya

Hide specific content from search engine SEO, javascript

Hello,
I was wondering how good this would work to hide specific
content for search
engines.
<script>
var text =
'<table><tr><td>Hello</td></tr></table>'
document.write(text)
</script>
I have a site that has a database, when a user arrives at the
page the
database is checked against the ip and a flag is shown for
that specific
country. I would like to hide that from search engines as the
search engine
seems to make it local to itself.
do you think the above should work ok. I have been told else
where "just
make it display only by Javascript... search engines do not
run javascript
and should thereore NOT see the text"
would be interesting to know others commons on this.
regards
k

.oO(Malcolm _)
>On Tue, 08 Jul 2008 18:28:41 +0200, Michael Fesser
<[email protected]>
>wrote:
>
>>.oO(twocans)
>>
>>>
http://wwp.greenwichmeantime.com/time-zone/europe/uk/flag.htm
>>>
>>>union jack
>>
>>But the Union Jack is not the English flag, which is
what I asked for.
>>
>>Working with flags in the WWW can become very
difficult. Making an
>>inappropriate choice may even offend some people.
>>
>>Micha
>
>well the English flag is the St George's Cross - Red
Cross on white
>background. it is shown just below the Union Flag.
Correct, but most people don't know that and just take the
Union Jack
for everything that's somewhat related to "English", hence my
question.
It's most commonly seen on pages that use flags to point to
different
language versions of that page.
This is not the case here, though, but I just wanted to point
out that
flags on a website can be troublesome. And I still don't
think that
determining the user's country just by looking at its IP can
be done
reliably, so some users will definitely get a wrong flag.
Whether this
might be a problem or not depends on the OP and his target
audience.
Micha

Example to see all site collections in a specific content DB in sharepoint 2010

Can someone give an example to see all site collections in a specific content DB
in SharePoint 2010.
I've tried the below ones but it gives all content DB's with all site collections.
Get-SPContentDatabase | %{Write-Output "- $($_.Name)”; foreach($site in $_.sites){write-Output $site.url}}
Appreciate your help

Use Get-SPSite cmdlet
$spAssgn = Start-SPAssignment;
Get-SPSite -ContentDatabase "<SPContentDBName>" -Limit ALL -AssignmentCollection $spAssgn|Select Title,Url;
Stop-SPAssignment $spAssgn;
Get-SPSite
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

Custom Action to the Ribbon - Not Associated to a specific Content Type?

Is it possible to create a custom action on the ribbon that ISNT associated to a specific content type?
I want to perform an action that isn't related to a list / item / lib - it should be available regardless of the context of the action I'm performing.
I have this :-
<CustomAction
Id="Steve.SharePoint.Ribbon.SSSCTab"
Location="CommandUI.Ribbon"
RegistrationType="ContentType"
RegistrationId="0x01">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.Tabs._children">
<Tab Id="Steve.SharePoint.Ribbon.SSSCTab"
Title="Custom Tab"
Description="Groups and controls will go in here"
Sequence="550">
<Scaling Id="Steve.SharePoint.Ribbon.CustomTab.Scaling">
<MaxSize...............
If I remove the RegistrationType and ID, the tab doesn't appear at all. With it set as above, the tab is available, but the controls are greyed out unless I am working within a list ....
I'd like to have it always enabled if this is possible?
Thanks
Steve

Removing those 2 should do the trick, try the following:
Remove the RegistrationType and RegistrationID. Redeploy, restart your server, and clear your browser cache through F12 Developer Tools.
Dimitri Ayrapetov (MCSE: SharePoint)

Industry specific Content installation

Similar Messages

Maybe you are looking for