Inernet and server failed 'Red Light' suggestions? (MBP)

I think have tried pretty much everything
Renewing the DHCP, turning airport on n off etc ..
The net doesnt even work with the ethernet
However, i have parallel desktop, and the net works with that, but not with the actual mac ..
Any suggestions ??

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease". Note that the fix this step implements may be temporary.
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

Similar Messages

TS1574 you should mention that the audio output jack is fleaky, try plugging and unplugging until red light goes off !!!

It should be mentionned in the Apple help that the audio output jack is sometimes fleaky, as it does not reclose the speakers contacts correctly when an earphone jack is removed. This can be checked by looking into the computer audio jack and seeing a red light, which confirms the optic output is active. Plugging and unplugging the jack until the red light disapears is the cure, unless you are unfortunate enough to have a broken audio jack. Good luck !

Same here. I don't remember doing anything out of the ordinary. I was working in Parallels on getting a AM station to stream via some web interface. Next time I went to play sound on the internal speakers, no go.
I've tried zapping the PRAM, toggling the headphone jack and the toothpick thing. Nothing seems to work.
I've also noticed that I get sound in my headphones in iTunes but not in Garageband (someone had suggested that starting up Garageband would reset things.
Any other ideas out there?
Is there a file that could get corrupted that I could switch out of my back up?

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

Regarding your new Guest Account.
If it is the Guest User created by Find My Mac, it is advisable that you leave it be in order to maintain the functionality of the Find My Mac system. It is not a typical guest account. A person can't use the account to log into the system. It only permits the user (presumably a thief) to use a crippled version of Safari, in which the thief will reveal his/her location, hopefully to an end result wherein you may be able to recover the stolen computer.
The very nature of this unique guest account is to increase the security of the system, not to degrade it as a typical guest account might do.

My MBA indicates my connection is timing out. My wifi on other laptops work in the house. Diagnostics indicate wifi settings failed, network settings failed, ISP failed, Internet failed, and server failed. What can I do?

My MBA indicates my connection is timing out. My wifi on other laptops work in the house. Diagnostics indicate wifi settings failed, network settings failed, ISP failed, Internet failed, and server failed. What can I do?

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

A 2nd gen shuffle is about six year old at this point. The likely cause is a battery that is worn out, with greatly reduced capacity or inability to hold a charge. The initial green light shows a good charge. The red light means the battery is drained.
Since the shuffle still appears in iTunes, you can try doing a Restore in case the cause is related to corrupted software on the shuffle. The Restore button is on the shuffle's Settings screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings.
Also, when the light becomes red and the shuffle stops playing, try turning OFF the shuffle for at least ten seconds. Then, turn it back ON. This resets the shuffle. Does it play again? If it does, let it play until it no longer plays again. Repeat turning it OFF and ON until it no longer plays. Then, connect it to power and charge it to full. See if that makes any difference.
If that does not help, the solution is to replace the battery. If you have a repair shop do it, the cost is probably uneconomical, compared to the cost of a brand new 4th gen shuffle ($50) that has more features, and a new set of headphones, plus a one-year warranty.
If you are good at such things, this web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle

Internet not working - wifi connected but internet and server fail, ethernet cable doesn't work either

All of a sudden the internet on our Macbook Pro does not work. We connect through an Airport Extreme and other mac works fine. It shows that wifi is fully connected but when i go to diagnostics, i see the internet and server are failing. I tried connecting an ethernet cable and it doesn't work that way either. Have restarted and reset modem and router, nothing is working… help!

Hi ehamzic1,
Welcome to the Apple Support Communities!
I understand how frustrating it can be when your computer cannot connect to the internet. In your situation, you will need to isolate to find what is causing the issues connecting. I would recommend reading over and working through the attached article. The article should help you troubleshoot and resolve this situation.
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
http://support.apple.com/kb/HT1714
Have a great day,
Joe

Internet and Server is red

My wireless router is working perfectly fine.
I have tried turning it on and turning it off
but the red lights dont leave and I can't access the internet.
what can I do to fix this issue?

mydinosaurlife wrote:
My wireless router is working perfectly fine.
How can you be sure? What is its brand and model number?
but the red lights dont leave and I can't access the internet.
What "red lights" do you mean?
Please edit your "public profile" to include (a) your model of computer and (b) your operating system. Some of the advice you may need will depend on those details.

Curve 8310 and perl 8100, red light blink

Both phones have the same problem, dont start, my computer doesnt reconize. and when get conected the red ligth blink in the secuence 3 blinks, pause, 2 blinks... and repeat.
helpme please.
im using windows 7 x64 with Blackberry Desktop Software 6.
i can give any other information.

If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have one flash pause and 4 flash red light.

The blackberry will not turn on. I have it plug it into my laptop and it will not recognize it. The screen stays black. I have tried running jl_cmder v1.9.3. It just comes up with a black screen and it goes away. I'm running Windows XP. Any help that would be great. Thanks

Hi:
Please see the troubleshooting guide at the link below.
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00368814/c00368814.pdf
There is a section that explains the beep codes and the suggested course of action to repair.

CS5 AE and Premiere Fail to install on MBP i7

Hi,
I'm trying to install Premiere and After Effects onto new MacBook Pro, with 2.66 Intel i7 and its running OS 10.6.3.
I've tried installing the try of the Production suite and Master collection and with both I get all the App installed exept After Effect and Premiere both fail to install. I checked and it is running 64 bit so I'm a bit confused, any ideas?

Yeah, but it definitely thinks you are running on an unsupported CPU.... I would try to boot into safe mode and let OSX repair itself, maybe that helps.
Mylenium

Toshiba 52HL167 popped and turned off - red light flashing

While on, the TV made a pop noise and lost power. I let it cool overnight, but when I try to turn it on now, it makes some clicking noises as if it is trying to turn on from the middle top of one of the boards labeled "PE0365". Do I need to replace the board and if so, where can I get one?
Thank you,
Mrworkman2

Try performing a system repair using PC Companion - This will factory reset your phone and erase all data
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Blackberry Z10 (SLT100-2) won't startup, no blinking red light and isn't recognized by PC

I have been using blackberry z10 which i bought from UK 1.5 years ago which was working fine so far. now, all of a sudden, my handphone's battery drained within 30 min, than started giving 4 short red flashing light within short interval. one of my friend using same model, bought from malaysia, he told me to unplug the battery and connect the device to directly wall charger. After i did that, flashing lights are gone and giving once red light each and every time i connect wall charger with my handphone. now i interchange the baterry wid charged one. it showing no lights even if i push the starting button. I already updated the latest os and using sideloader application named(mobile 1 market).
i now live in malaysia and also i got no receipt for showing this handphone to any BB care centre.
I already watched all the post and tried doing this steps..
http://www.blackberryos.com/blackberry-10-os/37518-how-install-leaked-os-onto-your-blackberry-10-sma...
but my phone got no connection to wallcharger, pc cable even any fully charged battery.
can you guys please help me out!!!

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, then redo it but increase the wait time in step 4 to 2 hours, and perhaps 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

MBP Headphone port RED Light lit

Hi,
I try to connect a headphone with mic for my MBP during IM, but it don't work!
And i saw "Red" Light lit up inside the port, after i un-plug the headphone.
any ideas what's the problem?
cheers, with many thanks!

More to say… Although you can search other posts regarding this issue, here is a sample of what I was talking about. You may need to have a contact Apple suppot if this continues.
http://discussions.apple.com/thread.jspa?messageID=2331538&#2331538
Regards,

Iphone4 wont chrge and red light on

sudenlly my iphone4 is off and wont chrge from wall charge or pc and there is red light on all the time in the front
any help

Reset, hold together both the Home and Power buttons for about 15 seconds, until the iPhone turns on. If this works and everything is OK then great.
But if it does not work ...... the Red Light is a glowing sensor due to increased voltage in the iPhone. Take the iPhone to Apple for Warranty Service.

Inernet and server failed 'Red Light' suggestions? (MBP)

Similar Messages

Maybe you are looking for