Inexperienced but Learning, with a Bouncing Question

Hello,
I'm writing because I've tried all I can up to this point, so am seeking out other great resources such as this discussion board.
Everything's worked without a hitch, thus far. Logic Express is good, no problems at all . . . until the time comes for bouncing.
When I attempt it, there is no sound on the files that I choose to "Add to iTunes Playlist". Strange? Thus, I cannot burn any CD's, I'm assuming, until this dilemma is remedied.
I work with a Korg M3 Workstation/Keyboard, hooked up as simply as I know how. I've a very green thumb when it comes to recording, so please bear with me.
My setup is as plain as can be. Everything's connected as I've been instructed by various sources (Logic Guides, Discussion Boards, video tutorials, etc.)
So with that in mind, what am I missing? Any discrete volume controls I'm missing? Bit-rates that need altering? Any particular boxes that need checking? I've tried all the options I know about. Anything would help me at this point.
Everything's arranged in default settings, I suspect, so what do I need to instruct the computer to do so that it will act according to my needs, regarding bouncing?
Thank you so much in advance for your time, whoever might be helping me with this.

Hi,
if the Korg makes the Sound, it is not inside the Computer. Only the information on how to play back the sound is sent from logic to your korg.
So, to get this sound into your Computer, plug your Korg's *audio outputs* into your macs audio inputs (or, preferabley, get an audio interface which makes thing easier and better quality).
Then, create an audio track in Logic to record the sound that comes out of your korg.
Then, once the sound is recorded inside Logic, you can bounce it. You can only bounce real sound, real audio, not midi information. You can, however, use software instrument tracks, then logic will use them to playback the midi data and create sound.
Fox

Similar Messages

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHz

Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

TS1440 iMac freezes, no choice but to hard shutdown, turn back on, white screen with folder and question mark appears

Hi,
so my iMac (it's not the most recent iMac if it makes any difference, and I'm running mountain lion 10.8.3) often freezes and I do a hard shutdown as I cannot force quit the applications or click on the apple in the top left to shut it down. When I come to turn it back on, I'm greeted with a white screen, in the middle of which is the dreaded folder with the flashing question mark in it. I've noticed that just before a freeze occurs, it starts running slowly and if I try going onto Facebook for example, it says that it cannot connect to facebook.com despite the internet connection being fine as I can browse things on Google. I have also noticed that before a freeze, in Finder, in All My Files, no files show. I went through this http://support.apple.com/kb/TS1440 and the problem still persists. Sometimes it does load fine if I shut it down again but when I eventually open up safari, if I had been on youtube for example, it will reload the page from a few videos before and not the one I was on when it actually froze.
Any help would be hugely appreciated,
Thanks
Side note: When it says I must choose a community in order to post this, it only gives me a choice of 3 which are Mac OS X v10.4 Tiger, v10.5 Leopard, v10.6 Snow leopard, so apologies if this is posted in the wrong place - is there any way to get it moved to the correct place?

Yes,easy fix but difficult to buy,think you can get them from the states (off the top of my head about £15).When you go to the apple store,tell yhem what you suspect and they will test if it is the cable or if its the hard drive,dosn't take that long and it's free.If you know what to do you can take the back off and with strong magnifying glass you might be able to see the fray look at the bend of the cable.

I am having trouble with my security questions, I want to change them, so it says that it sent me an email to change it but it never shows up, so I can't buy anything now?

I am having trouble with my security questions, I want to change them, so it says that it sent me an email to change it but it never shows up, so I can't buy anything now?

This issue was resolved! I didnt think about restoring my computer to factory settings but I did and now my computer works like brand new. basically, just back up your files and do the following:
http://www.youtube.com/watch?v=yPmT5Xbb8p0

Having trouble with the security questions for iTunes. Tried to reset them, but the mail from Apple never comes . . .

Having trouble with the security questions for iTunes. Tried to reset them, but the mail from Apple never comes . . .

You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(96290)

HT201363 I have requested the email to help me with forgotten security questions several times over many days but I do not get the email; now I cannot use my account without knowing the security question answers?

I have repeatedly requested the email to help with forgotten security question passwords but never receive it; I cannot access my account for purchases with out the answers; how can i fix this?

Hello Jamped,
It sounds like you are doing the correct process to reset your security questions, but you are not getting the email at your recovery address. I recommend checking your spam folder first. If it is not there I would next reach out to
our iTunes Account Security team who may be able to help if you can verify your account info:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
All the very best,
Sterling

Please help me! What can I do to stop receiving lots and lots of emails with all participants questions. I tried what was sugested but it didn't work!

Please help me! What can I do to stop receiving lots and lots of emails with all participants questions? I tried what was suggested but it didn't work.

You got your answers in this thread here and you marked it as correct.
https://discussions.apple.com/message/16541734#16541734
When you get to the email preferences page to make the changes, did you click on "Save" at the bottom of that page to lock in the changes that you made?

I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Firefox is not displaying alt codes correctly, substituting a black diamond with a white question mark in their place.

Alt codes (such as ® for "registered" and  for "trademark") are being displayed as a small black diamond with a white question mark inside of it. This has also started happening to more simple characters such as exclamation marks, dashes and apostrophes.
Any ideas?

Thanks for your reply cor-el.
My posting actually included the alt code syntax, and is now rendered as the corresponding special character. I guess this isn't a surprise!
And no, it was rendered just fine. This morning when I went into the browser to see the problem, it was not mis-displaying as it had been...it had somehow changed and was behaving very nicely. That's all fine, but I'm a little bit wary of this FF browser functionality now...steady as she goes.
Also, I did check the (View > Character Encoding) you recommended, and after experimenting a bit discovered that using "Unicode (UTF-8)" made the wierd black diamond/white question mark character come back in all of the same places it was occuring...up until this morning. I've set my browser default to "Western (ISO-8859-1)" now, and everything is displaying as it should.
Thanks for your reply and suggestions. I hope others will learn from these experiences.

To download from AppStore want tree security questions but i have only one question

When i want to download (free) from AppStore ask me TREE Security questions , but in security settings my APPLE ID have only ONE question and answer
Help me please in this problem

Hello HalisaEr,
Thank you for the details of the issue you are experiencing with your security questions. I found an article with some useful information if you unable to answer the security questions:
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
You can find the full article here:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you continue to have issues, please contact our Account Security Team as outlined in this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

Use question pool with multi-part questions?

Is it possible to use the question pool in Captivate 5 for a quiz with multi-part questions? I'd like to have a question selected from a pool, but after the learner answers the first part, they get a second question that is based on the first part.
They get a question: "Is this heart sound dangerous or safe?" Then, after answering that, they'd get the question "What is the diagnosis?" for the same sound. The first question comes from a specified pool, but the second question is based on the first question. Then, they'd go on to a new pool question.
I''d appreciate any suggestions.
Thanks!

I would use the XML function from Captivate 4.
- Make yourself a test quiz with two slides, one being a multiple choice.
- Export it to XML
- Open the XML File in Excel
Good point to start with is ns1:g and ns1:Source26.
Most likely you can get all your question into captivate that way.
Mr_TD

I am trying to use my account to purchase but i forget my security questions and also i gave the wrong email address. What can i do?

i am trying to use my account to purchase but i forget my security questions and also i gave the wrong email address. What can i do?

Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

Somebody has created an apple id using my gmail id. So I gave forgot password option and reset the password of the id. But for resetting the security questions, link is going to some other email id which is created by the other guy.How can I resolve this?

When I tried to create and apple id using my gmail account i found that somebody has already created an apple id using my gmail id. So I gave forgot password option and reset the password of the id. But for resetting the security questions, link is going to some other email id which is created by the other guy. Now the problem is that the other guy also can reset my password and access my account.
I contacted apple customer care and they are not ready to help me saying that I need to give information about the last device I logged in using this id. How can I give it when I did not create it?:) Also they are saying this account has been verified and that could happen only if someone has hacked my gmail account and verified the id using the link sent by apple.
Later I did some experiments and found that this is a security flaw from apple. Somebody has created the id and never used it(I tried to loggin to icloud and it was saying this account was not used it any apple device). The account became verified when I reset the password.(This is a bug, account should be verified only when we click on the verification link sent by apple).
The other mistake apple did is that they allotted my gmail account to someone before it's verified eventhough it cannot be used unless verified. Actually apple should allot the account id only after verifying the email address.
Apple customer care is not ready to help and I am tired of fighting with them. Can any of you guys suggest any means of getting back my gmail id to use it as apple id?

I don't think you're going to be able to. I would guess the other person used your address by accident, and when he found he couldn't access the account (because you'd changed the password) he abandoned it. Your GMail address is now locked to that account and even if it was changed you can't use it to create another.
You already have an Apple ID, which you use to log in here; you can use that to create an iCloud account if that's what you are trying to do. If you want to create a different Apple ID just get another free address such as a Yahoo one.

Inexperienced but Learning, with a Bouncing Question

Similar Messages

Maybe you are looking for