Inexplicable behavior by Puppet Warp crashes Photoshop

I am running Photoshop CC 2014.1.0 (release 20140730.r,148 x64) on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version, 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

Yes I did. I always have my drivers up to date & in the right way. Even Audition cc seems to crash at startup on the 2014 edition. Also noticed that that as I started working with flash the preview lags a lot and the cursor lags too.
Pretty disappointing.

Similar Messages

Photoshop shuts down when using puppet warp

Whenever I use puppet warp in Photoshop it shuts down when I try to add the second pin. Any ideas why?

Be sure your graphics drivers are up to date..
Benjamin

Can't find Puppet Warp

I'm using CS4. I need to use the Puppet Warp tool but I cannot find it anywhere. Every place I've looked says it should be under the Edit tab but it is nowhere to be found. Help!!

Well I was wanting to twist an image into a word, like in this tutorial: http://abduzeedo.com/cool-text-effect-puppet-warp-tool-photoshop-cs5
Annnnd I just now noticed on the page and in the URL that it says CS5. I might just do the CS6 30 day trial.

Anything like PS puppet warp?

does after effects have anything similar to puppet warp? like where i could input a png, and have certain points of it move, while maintaining stability in other points? or would i have to cut it up and import each part as layers and manipulate them with size and locations? just brainstorming here...

Puppet Warp in Photoshop is actually developed from the Puppet Tool in AE. The Puppet Tool allows you to lay pins, adjust elasticity, and apply "starch" to solidify/lock segments of the puppet.
Here's a tutorial from Lynda.com:

Why is my adobe photoshop trying to crash when i use the puppet warp tool?

Every time i go to use the puppet warp tool i need to finish my assignment, photoshop says it is trying to fix the problem and then says it cant fix it and shuts the whole program down. And would like to know why is my adobe photoshop trying to crash when i use the puppet warp tool?

You'll need to give us more information. What OS, what Photoshop version, how much RAM, what is your video card, and what are your performance preferences, etc., etc. -- ??

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?

Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?

Questions on using a specific program should go in that program forum
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Keyframe using the puppet warp tool in photoshop CS6?

Is there any extension or way that will allow me to keyframe using the puppet warp tool in photoshop CS6?
I'm doing 2d animation, and I need to draw lines that I can immediately animate using puppet warp (you can't draw in after effects).

I am removing a dust spot from video clips taken during an aerial shoot. I have discovered that the only effective way to remove these spots effectively is to use PS6 and go frame by frame using the paint brush, clone stamp, and spot healing brush. It is very time consuming and mind numbing but the only thing that works with all tha movement of the aircraft and the ground below.
My question:
Right now to advance the clip one frame at a time - I must magnify the time line so to see the frame by frame lables. To advance to the next frame I must remove my cursor from the work area and go down to the time line and click on the next frame.
How can I advance to the next frame with a keyboard stroke and not move my cursor out of the work area?
Thank you in advance for any help.
Tony

Can one save Puppet Warp settings as a preset?? in Photoshop CC 2014

Can one save Puppet Warp settings as a preset?? in Photoshop CC 2014

I have the same question too. I always have to change the density of pins to 'more' and increase the expansion.

Photoshop Elements 12 & puppet warp

Please could someone tell me whether Photoshop Elements includes puppet warp.
Thanks

Krita offers a comparable deformation tool, though it is not based on ARAP method, but on the Moving Least Squares method.
Still, you get comparable results.
http://www.youtube.com/watch?v=kgTkfebleCE&t=1m12s
Btw, Krita is open source and free.
http://www.kogmbh.com/download.html (Windows)

Severe Puppet Warp bug

I have been having this issue with certain uses of Puppet Warp and I'm not sure if it's how I'm using, the settings I have for the warp or my computer.
It happens on two different MacBook Pros with 8GB of RAM, on Mac OS X 10.8.4
I will spend about 40 minutes warping a photo converted to a Smart Object so that it looks like it's wrapping around a blanket like so:
This usually works just fine. I can save the file, and edit the photo more as time goes on and nothing is odd... until I save and come back to the file later.
When I open the file and try to edit the photo in the Smart Object, reduce the size of the entire image, or even just double-click on the Puppet Warp filter on the layer panel, it does this:
The pins are way off the board, the image looks like it's split into different parts and the only way to get it back is to Undo any changes. The settings for the Puppet Warp are: Normal, Normal, 2px
The image is 7"x5" at 240dpi.
This doesn't happen with all of my Puppet Warped images, but this one shows this behavior every single time. At one point I went in and recreated the Smart Object and Puppet Warp and it did the exact same thing after I was finished. This happens in both CS6 and the new CC versions of Photoshop.
Has anyone ever seen anything like this and if so, is there a solution?
Thanks in advance!
-Ian

Thanks for the suggestions. I couldn't come up with any one method to fix the problem. I tried different documents, building the asset without masks of any kind, smaller resolution etc. It did the exact same thing every single time.
I finally just settled with using the other Warp transform method since I ran out of time for delivery.
I'll keep a lookout for anything that may cause this in the future, but it sure is frustrating.
Thanks again!

Why can't I rotate multiple points in puppet warp at the same time?

You can rotate single points in puppet warp, and you can shift+click to select multiple points and move them at the same time but I see no way to rotate multiple points as one group using puppet warp. This would be a very helpful feature I think should be added.

Please post Bug Reports and Feature Requests over at
http://feedback.photoshop.com/photoshop_family/

Puppet Warp - ignore unlinked layer mask

When I am using puppet warp to transform a layer with an unlinked layer mask, the layer mask does not remain in place, it is being warped along with the layer I am working on. This seems to be a bug since the normal transform tools allow the layers to be modified without affecting the mask while it is unlinked.
Grouping the layer by itself and putting the layer mask on the group while I'm using puppet warp to transform the layer works fine and is really not that inconvenient I suppose.
The image I am working on is a large scan of an old map with 12 pages, I'm basically trying to line up all the pages into a seamless image, and so each layer has a mask to hide the margins of each page. I really don't want to have to create a group for each layer just to have each mask stay in place while I'm adjusting the pages. I also do not want to "erase" the margins by applying the layer masks before using puppet warp.
Is this something that will be "fixed" in Photoshop?

I think Puppet Warp is intended to include transparency in the form of Layer Masks, so it seems unlikely that this behaviour will be changed.
You could temporarily turn off the Layer Masks by shift-clicking them.
If you want to make a Feature Request, please post over at
http://feedback.photoshop.com/photoshop_family/

Free transform and warp crashes CS6!

When I'm using the free transform or warp in Photoshop CS6 it's suddenly started crashing, telling me that "Photoshop CS6 stopped working correctly". This started happening today and I don't know what to do! :< Help!

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Puppet warp automatically zooms in when applying pins

After adding a puppet warp mask over my layer I click to start adding pins and it automatically zooms in 100% around the first pin and changes the current layer I'm on to a 100% crop of what is around the pin. If I zoom out it just zooms out of my current cropped image. I cant pan or move around and if I apply the puppet warp it applys it to that small section that it just zoomed into. Very odd and I can't seem to find a work around. I've used puppet warp several times in CS5 and a few times in cs6 but this just started happening. 13.0.1 x64 Windows 8. Anybody had this happen?

Could you please post screenshots with the pertinent Panels visible?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Inexplicable behavior by Puppet Warp crashes Photoshop

Similar Messages

Maybe you are looking for