[Inf. Broadcasting]: How can i make pre-calculated report.

Dear experts,
Could somebody help me how to produce pre-calculated reports using Information Broadcasting since right now our bw version has been upgraded to 7.0 ?
Pre-calculated report i mean is like this :
(i'll show it throught example,aim to explain it clearly).
1. In the night (Or Everynight) BW calculate/run the report (it's scheduled).
2. In the next morning (Or Everymorning), when user is accessing that report, they don't have to wait the BW to run/calculate the report, since BW has done it in the night.
O.. ya .. btw, i've not had yet the latest e-portal. So i still can not use inf. Broadcasting to burst the data to e-portal yet.
Can everybody tell me how to make it .. ?
Or is there another way to make it using BW 7.0 ?
Many thanks for all your attentions.
Best regards,,,
Niel.
Message was edited by:
Niel

As I understand it, many barcodes don't allow you to script the presence to protected. Changing it in the XML source code is the only way I know of to reliably change it. If you click on the barcode in Design view and then click on your XML Source tab you'll see the first line of code for that object. It will look something like:
<field name="Code2Of5MatrixBarCode1" y="79.375mm" x="76.2mm" w="29mm" h="10.16mm" access="protected">
If you don't have the XML Source tab available to you in Designer, you can open it by clicking the View menu and selecting XML Source from the menu. Be aware that barcode behavior is not the same as other fields, even if you change it in the XML Source to protected the user may still be able to select it with a mouse click.

Similar Messages

Firefox Health Report Vital Stats shows bookmarks 14, but Raw Data shows bookmarks 7917. How can I make Firefox Health Report Vital Stats show bookmarks 7917?

All data in the about:healthreport Firefox Health Report page is accurate except for the persistently inaccurate bookmarks count in the Vital Stats section of the page, which counts only 14 bookmarks and fails to count the other 7903 bookmarks.
The about:healthreport Firefox Health Report Vital Stats section shows bookmarks 14.
The about:healthreport Firefox Health Report Raw Data page shows bookmarks 7917.
The Firefox/Bookmarks/Show All Bookmarks/Library window shows 7910 items.
How can I make the about:healthreport Firefox Health Report Vital Stats section correctly and accurately show "bookmarks 7917" instead of incorrectly and erroneously showing "bookmarks 14"?
Platform: FF 36.0.4, Mac OS X 10.8.5
Platform: FF 31.5.2 ESR, Mac OS X 10.8.5
The following steps reveal the issue:
(1) In the Firefox Navigation Bar, type "about:healthreport" (without the quotation marks) to open the Firefox Health Report page.
(2) On the left side of the Firefox Health Report page, in the Vital Stats section, the following data appears: bookmarks 14. This is false data because the browser actually has 7917 bookmarks, not 14 bookmarks. All other data in the Firefox Health Report page is accurate.
(3) In the Firefox Health Report page, click the Raw Data link to reveal all Raw Data.
(4) Page Down approximately 10 pages to the following specific Raw Data:
"2015-03-22": {
"org.mozilla.addons.counts": {
"_v": 2,
"extension": 28,
"plugin": 6,
"theme": 1
"org.mozilla.healthreport.submissions": {
"_v": 2,
"continuationUploadAttempt": 1,
"firstDocumentUploadAttempt": 1,
"uploadSuccess": 1,
"uploadTransportFailure": 1
"org.mozilla.places.places": {
"_v": 1,
"bookmarks": 7917,
"pages": 4293
5) The preceding Raw Data correctly indicates the following data: "bookmarks": 7917,
6) Open the Firefox/Bookmarks/Show All Bookmarks/Library window.
7) In the Library window sidebar, select the entry "All Bookmarks".
8) In the Library window Search Bookmarks search bar, type the colon punctuation mark " : " (without the quotation marks) to reveal the entire list of all items (bookmarks) in the Library window.
9) In the Library window, select any one of the items (bookmarks) in the list of items.
10) Press the <command> <A> keys to select and highlight automatically all items in the items (bookmarks) list, and Firefox automatically will begin the process of counting all items (bookmarks) in the items list.
11) After a counting interval of several seconds, the count of the total number of items (bookmarks) that are present in the items list appears near the bottom-center of the Library window: 7910 items.
12) I installed the "Places Maintenance" add-on, selected the "All" preference, and executed the add-on, but it did not correct the issue.
13) The about:healthreport Firefox Health Report Vital Stats section counts only 14 bookmarks and fails to count the remaining 7903 bookmarks.
Note --
On the support.mozilla.org/en-US/questions site, after selecting ASK A QUESTION and writing this question, I attempted to upload image files with the question, but I am unable to upload a JPG (97 KB) image file or a PNG (307 KB) image file because the "Add Images Browse" function appears to be broken.
Each time I click the "Add images: Browse" button, select one of the image files, and click "Open" to upload the image file, a spinning gear appears in a square beneath "Uploaded images:", and the spinning gear continues to spin without stopping. The image file does not upload.
While the gear is spinning, the message "Uploading <filename>.jpg" or "Uploading <filename>.png" remains constantly visible beneath the square that contains the spinning gear.
I think the gear would have continued to spin for eternity if I had not reloaded the page after the gear had been spinning for a full 7 minutes.
The image files would not upload.

It could be the work of one of your add-ons.
Type '''about:addons'''<enter> in the address bar to open your Add-ons Manager.
Hot key; '''<Control>''(Mac:<Command>)''<Shift> A)'''
In the Add-ons Manager, on the left, select '''Extensions.'''
Disable a few add-ons, then '''Restart Firefox.'''
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
If the problem continues, disable some more (restarting FF). Continue until
the problem is gone. After, you know what group is causing the issue.
Re-enable the last group '''ONE AT A TIME''' (restarting FF) until the problem returns.
Once you think you found the problem, disable that and re-enable all the
others, then restart again. Let us know who the suspect is detective.

How can i make sql formated report

sql formated report..
empno month sal
10080 500
1000
2000
10020 100
50
will you please give the way...

Hi, for make a formated report you will must configure the SQL Plus enviroment, you can review the next link for set the values according at your requirements.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12040.htm#SQPUG083
Luck.
Regards.

How can i Make a Ledger Report

hiiiiiiiiiiiiiiii,
i have a report of like this
ac_id ac_name Narration Dr Cr
1 cash received 500
2 exp elect bill paid 1200
3 sales bill received 5000
Total 1700 5000
i want a report like this
ac_id ac_name Narration Dr Cr Balance
1 cash received 500 500
2 exp elect bill paid 1200 1700
3 sales bill received 5000 (3300)
total 1700 5000 (3300)
plz all reply me as soon as possible.
i am waitig for ur reply....

Add 2 columns in the same group where the DR and CR amounts are. The first one would be a formula column that calculates the net amount of the line. The second one, which you then place on the report, is a summary column that sums up the net amount.

[Inf. Broadcasting]: Pre-Calculated Report.

Dear Expert,
Can you all kindly suggest me what i've to do ?
I have information broadcasting with the setting like this :
Distribution type : Broadcast E-Mail
Output format : Online link to current Data.
With the kind of that setting, the recipient will get the email whose the content is the link to access report.
For my case :
1. User Get email whose content is the link.
2. User click that link.
3. User goes to the BW Website.
4. User key-in the parameter.
5. User run the report.
6. Report is displayed.
With the same case, could i make the proccedure like this :
1. User Get email whose content is the link.
2. User click that link.
3. User goes to the BW Website.
6. Report is displayed.
It means that BW has pre-calculated the report before user access the report. How can i make it ?
Could somebody help me to solve the kind of this problem please .. :).
Or
Is that any other ways to do the same like my requirement above ?
Many tks for the attention.
Best regards,,
Niel
Message was edited by:
Niel

Hi,
Check this link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fcf3ac90-0201-0010-cd8c-a591d58621c3
http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm

How can i make calculation in two file using two parameter

how can i make calculation in two file using two parameter
Solved!
Go to Solution.

i am having two differnt file, both file having no and time , i want to make programme that when, number and tiome is same in both file give that index onle in , i am going to attached the file
Attachments:
iisc11-jan2010extract.txt ‏1253 KB
sp3.xlsx ‏12 KB

When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%

When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%

hi barbara
thank you for your response, i appreciate it. there's definitely nothing wrong with the mouse or trackpad, both work fine in every other application....i can also easily change size dimensions in other programs on my computer so it doesn't seem to be that either. it seems like there is something weird going on in the way that pse and my mac are interacting with each other, just wish i knew what it was. thank you again, wish me luck!

How can I make a row of cells containing 3-digit decimals, who's values resulted from calculations within the spreadsheet, appear as durations of minutes and seconds?

Row 6 in this spreadsheet is the result of Row 2/Row 3 as evidenced by the formula listed while Cell Y6 selected. How can I make the values in this row appear as durations of minutes and seconds rather than 3-digit decimals? For example, rather than appearing as 9.84 I would like the value of Cell Y6 to appear as 9:50 or 9min 50sec. (obviously .84x60seconds 50 seconds). I tried changing the cell formats from "number" to "duration," but no change is made. Using the "duration" format does however work if I am manually entering the decimal value into the cell rather than allowing it to result from another caluclation within the spreadsheet. Is there a solution to this within Numbers '09? You can see why I would want the "pace" displayed in minutes and seconds. Thanks in advance!
Ryan

Hi Ryan,
You wrote:
"The problem is that my "Distance" is a row of automatically generated values resulting from ((Row1/60)*Row 6). Changing the format of Row 1 to minutes causes row two to be expressed as a duration, which obviously it shouldn't because it is a distance. The spreadsheet has to be designed so that all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace). The rest of the cells must be automatically poulated as a result of formulas."
I'm assuming that where you say "Row 1" in this you mean "Row 2", which is labeled "Time" in the example in the OP.
In the original post, you presented a formula from cell Y6. Replacing the Header labels in that formula's cell reference with the Addresses of the referenced cells, the formula was:
Y6: =Y2/Y3
In this post, you are saying that Y6 contains entered data: "...all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace).
Which is correct?
Regards,
Barry

How can I make a pre made vector outline thiner?

I downloaded a free vector shape, but the outline is to thick, how can i make it thinner so it matche's up with my other vector shape's?

Wade_Zimmerman wrote:
what on earth are you talking about -0p2 equals 2 pts because there is no such thing as -0 picas so what you are left with is 2.
You’re usually right about a lot of things, especially Illustrator, but you’re wrong about this one, Wade.
Why does -0p3 work in InDesign? Why does -1p0 or -1p6 (ie -18 pt) work in Illustrator? When I use the cursor keys to increment values I can press up to increase the increment by 0p3, but I cannot go below 0p. Press down and the value goes to 0p3.0
to write -0p2 is a bit crazy when you should be writing -2pt. The whole thing you want fixed is a bit strange i can't imagine why you would even need this.
Look at this screen shot of the control panel from Illustrator 15:
If I enter -3pt when the default units are picas, the dialogue changes it to this:
“-0p3’ means -3 points, using the long established convention that PageMaker, InDesign, Photoshop, QuarkXPress, FreeHand, and (except for this bug) Illustrator have supported for years.
Bug.

How can I make the execution of my script faster

Hi everyone
How can I make the execution of my script faster, because it takes a lot of time to execute? The following is my script:
DECLARE
CURSOR C1 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
CURSOR C2 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
big_syb_qty_issue number(12,3);
small_syb_qty_issue number(12,3);
big_issue number(12,3);
small_issue number(12,3);
item_syb_code varchar2(30);
big_syb_qty_rec number(12,3);
small_syb_qty_rec number(12,3);
BI_SUPP_REC number(12,3);
SM_SUPP_REC number(12,3);
big_syb_qty_ADJ number(12,3);
small_syb_qty_ADJ number(12,3);
big_ADJ number(12,3);
small_ADJ number(12,3);
big_syb_qty_rec_iner number(12,3);
small_syb_qty_rec_iner number(12,3);
BI_INTER number(12,3);
SM_INTER number(12,3);
cl_big_qty number(12,3);
cl_small_qty number(12,3);
cl_big_qty1 number(12,3);
cl_small_qty1 number(12,3);
BIG_QTY_OPEN number(12,3);
SMALL_QTY_OPEN number(12,3);
BEGIN
     IF ((:FRM_STORE IS NULL) OR (:ITEM_FRM IS NULL) OR (:ITEM_TO IS NULL) OR (:DATE_FRM IS NULL)) THEN
          SHOW_MESSAGE('You Should Enter the Parameters Values Correctly Please try again !!!! ');
          RAISE FORM_TRIGGER_FAILURE;
          GO_FIELD('DATE_FRM');
     END IF;
DELETE FROM STOCK_AT_DATE_REP2;
COMMIT;
cl_big_qty := 0;
cl_small_qty := 0;
-- MESSAGE('Please Wait The System Calculating The Transactions !!!');
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'BUSY');
FOR R IN C1
LOOP
cl_big_qty := R.CART_QTY ;
cl_small_qty := R.QUANTITY_ON_HAND;
-- Transerfer Data 1
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_issue,small_syb_qty_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then big_syb_qty_issue := 0;
small_syb_qty_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec,small_syb_qty_rec
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then big_syb_qty_rec := 0;
small_syb_qty_rec := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 1
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_ADJ,small_syb_qty_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then big_syb_qty_ADJ := 0;
small_syb_qty_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec_iner,small_syb_qty_rec_iner
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
big_syb_qty_rec_iner := 0;
small_syb_qty_rec_iner := 0;
when others then message(10,sqlerrm);
END ;
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_issue,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec_iner,0));
big_syb_qty_ADJ := -1 * NVL(big_syb_qty_ADJ,0);
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_issue,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec_iner,0));
small_syb_qty_ADJ := -1 * NVL(small_syb_qty_ADJ,0);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty); srw.message(2000,'cl_small_qty'||cl_small_qty);
INSERT INTO STOCK_AT_DATE_REP2
VALUES(R.STORE_CODE,R.ITEM_CODE,cl_big_qty,cl_small_qty,R.ST_UNIT,R.SA_UNIT,:DATE_FRM,
:DATE_TO,0,0,0,0,0,0,0,0,cl_big_qty,cl_small_qty);
cl_big_qty := 0;
cl_small_qty := 0;
END LOOP;
COMMIT;
FOR R IN C2
LOOP
-- Transerfer Data 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_issue,small_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then
big_issue := 0;
small_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_SUPP_REC,SM_SUPP_REC
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('1- SM_SUPP_REC '||' '||SM_SUPP_REC );
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then
BI_SUPP_REC := 0;
SM_SUPP_REC := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 2
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_ADJ,small_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then
big_ADJ := 0;
small_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_INTER,SM_INTER
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
BI_INTER := 0;
SM_INTER := 0;
when others then message(10,sqlerrm);
END ;
BEGIN
     BIG_QTY_OPEN := 0;
SMALL_QTY_OPEN := 0;
BEGIN
SELECT NVL(S_BIG_QTY_OPEN,0) ,NVL(S_SMALL_QTY_OPEN,0)
INTO
BIG_QTY_OPEN,SMALL_QTY_OPEN
FROM STOCK_AT_DATE_REP2
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
END;
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_issue,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_SUPP_REC,0));
big_adj := -1 * NVL(big_adj,0);
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_adj,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_INTER,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_issue,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_SUPP_REC ,0));
SMALL_adj := -1 * NVL(SMALL_adj,0);
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_adj,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_INTER,0));
END;
BEGIN
UPDATE STOCK_AT_DATE_REP2
SET BIG_SUP_REC = BI_SUPP_REC,
SMALL_SUP_REC = SM_SUPP_REC,
BIG_ISSUE_TRAN = big_issue,
SMALL_ISSUE_TRAN = SMALL_issue,
BIG_ADJUST = big_adj,
SMALL_ADJUST = SMALL_adj,
BIG_INTER_REC = BI_INTER,
SMALL_INTER_REC = SM_INTER,
S_BIG_QTY_OPEN = BIG_QTY_OPEN,
S_SMALL_QTY_OPEN = SMALL_QTY_OPEN
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
exception
when no_data_found then
NULL;
when others then
message(10,sqlerrm);
END;
END LOOP;
COMMIT;
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'default');
SYNCHRONIZE;
-- SHOW_MESSAGE('The Data Have Been Calculated !!!');
END;
declare
     pl_id ParamList;
APPLICATION_ID VARCHAR2(20):='PRD';
          COMMAND_LINE VARCHAR2(100) :='STOCK_LEDGER';
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DATE_FRM',TEXT_PARAMETER,:DATE_FRM);
Add_Parameter(pl_id,'DATE_TO',TEXT_PARAMETER,:DATE_TO);
Add_Parameter(pl_id,'ITEM_FRM',TEXT_PARAMETER,:ITEM_FRM);
Add_Parameter(pl_id,'ITEM_TO',TEXT_PARAMETER,:ITEM_TO);
Add_Parameter(pl_id,'FRM_STORE',TEXT_PARAMETER,:FRM_STORE);
IF :REPORT_TYPE = 1 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
ELSIF :REPORT_TYPE = 2 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER_2.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
END IF;
END;
Waiting for your valuable answer
Best Regards
Jamil Alshaibani

Make a matte in Photoshop.
From the Photoshop menu bar: File > New > Film & Video Presets. Choose one that suits your FCP project pixel dimensions. Make the background black. Place a white rectangle with rounded corners on top (the white will determine how much of your picture is visible). Flatten Image. Save as TIFF. Import into FCP.
Move your video clips up to V2. Place the imported TIFF on V1. Highlight all clips on V2.
Go to Modify > Composite Mode > Travel Matte Luma. Done.
If you want soft edges, no need for a matte. Double click your clip to place it in the Viewer. Open up the Motion tab > Crop > Edge Feather. Nice and quick. Copy and Paste attributes for the other clips.

An index of my desktop files appears in firefox. why is it there? does this mean my personal files are accessible from the internet? how can i make sure this goes away and stops?

i am seeing and index of my personal files on firefox. what is this? why is it there? how can i make it go away? does this mean my desktop files are on the internet? can someone explain clearly and simply (i am not tech saavy at all) thank you

This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 
Helvetica Neue abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page. 
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps

How can I make my pages a smaller size after completing my work?

I have finished making some newspaper styled pages, however they are too big (due to poor calculations). How can I make my pages smaller, or to be the size I want?
Thanks!

As DOD and Peter have suggested, Layout Adjustment is probably the way to go. You will have to do some manual adjustments, but this tool can help save you some time.
If you are using CS5 or earlier this explains the process:
For CS6 you can use the Liquid Layout menu to do this:

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

Where are you located?
Just go and buy an iTunes gift card at any store in your country.
Then follow all the steps you did, but when it asks you for the credit card number, there shoujld be a GIFT CARD option which will let you load your account witht eh funds form the gift card without providing a credit/debit card #.

How can i make an iTunes store acount without a credit card?

how can i make an iTunes store acount without a credit card?
im israeli and the israel store is only the app store.
i want to get stuff for free without a credit card.
help?!?

Just go get a prepaid Visa or something. Put a small amount of money on it and then use that to open an account. If that doesnt work just call them. Contacting Apple for Support and Service 1 800 275-2273

HT1918 how can i make an apple id account without a credit card?

how can i make an apple id account ? it says i need a credit card but i dont have one how can i get passed this?

Download a free app, create a new apple id account and click none when it says to fill in credit card information.

[Inf. Broadcasting]: How can i make pre-calculated report.

Similar Messages

Maybe you are looking for