Infinity Blade Not Responding

Infinity Blade 3 is stuck in the final battle with Galath. After being defeated, it is stuck with a frozen view of the combatants. I quit out of the app, and I also reinstalled the app from Itunes. Nothing works. Any suggestions?

ASk the app developer or look at their support site or reviews.

Similar Messages

  • We purchased infinity blade and when we try to sync it on our itouch 3rd gen it says not compatible for this ipod

    We purchased an app called infinity blade and when trying to sync it to our 3rd gen ipod touch a message pops up on computer the it is not compatible to this ipod?

    Let me guess; you bought an iPod Touch that was labeled as an iPod Touch 3rd gen 8 gigabyte. first off that doesn't exist, apple resold the 2nd gen 8gb when the 3rd gen came out, as it would be a cheaper option for people. the 2nd gen is severely slower than the 3rd gen, and so infinity blade can not run on it, as many current games cannot as they are too powerful and barley work on a 3rd gen already, playing choppily and they lag a ton. Check to make sure the app requirments in the side of iTunes store says your device can work. Many stores labeled the re-release or the 2nd gen, which included the then current update which would have cost money for older devices, as a 3rd gen for some reason, even though Apple did not. If you do not believe me, check on apple for the list of iPod's that exist, labeled "Which iPod do I have?" also, you can check to see if you can update to iOS 5.0.1, the current iOS version, which can only be put on 3rd gen iPod touches and above, without a hack, as there is no more that can be put on older devices, as the new features require a faster CPU and more RAM, again, not enough in a 2nd or lower.

  • The walking dead and infinity blade 2 no longer working in full screen, all of the sudden. Already tried restore, not working, what should I do?

    It happened after seeing a video on vidto.
    I noticed something odd while playing infinity blade 2 and then I recognized it was actually smaller, with two black bands in the lower and upper part of the screen. I checked The walking dead, same situation. All fine with Wild Blood.
    Scorned by this fact, I restored the settings, without effect, then I tried restoring settings and data, reloading a backup made 2 days ago.
    the walking dead still shows 2 black bands in lower and upper part of the screen, I can't check infinity blade 2 right now since I am using a limited data Internet connection.
    Please help!
    (Using an ipad4)

    Hello Michele,
    Welcome to the Apple Support Communities. IF you are experiencing issues with apps that we downloaded from the App Store, the following article will assist with troubleshooting issues with any apps.
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Regards,
    -Norm G.

  • AMD A6-5400k - CPU1: Not Responding

    Hi fellas,
    I got a new CPU for my maschine, which runs on ARCH-x86_64 Kernel 3.6.10. So far everything went fine but one thing:
    At boot, only of the two cores is recognized. This is only the case in Arch, both BIOS and Windows show both Cores. I rebuilt my initramfs and reinstalled linux, but none helped.
    I realize, there are several topics around the www and this board, but none of them helped me in my case.
    I tried some things, like booting the LTS-Kernel.
    Any ideas how I can solve this issue?
    I got the outputs of dmesg (system boot):
    I think the relevant Lines are around 0.17000.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0.46-1-lts (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP Fri Oct 12 23:52:43 CEST 2012
    [ 0.000000] Command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000009d575000 (usable)
    [ 0.000000] BIOS-e820: 000000009d575000 - 000000009d856000 (reserved)
    [ 0.000000] BIOS-e820: 000000009d856000 - 000000009dbae000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000009dbae000 - 000000009e9d3000 (reserved)
    [ 0.000000] BIOS-e820: 000000009e9d3000 - 000000009e9d4000 (usable)
    [ 0.000000] BIOS-e820: 000000009e9d4000 - 000000009ebda000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000009ebda000 - 000000009f04c000 (usable)
    [ 0.000000] BIOS-e820: 000000009f04c000 - 000000009f7dd000 (reserved)
    [ 0.000000] BIOS-e820: 000000009f7dd000 - 000000009f800000 (usable)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100001000 - 000000043f000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-D3H, BIOS F1 10/09/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-D1FFF write-protect
    [ 0.000000] D2000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
    [ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000043f000000 aka 17392M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 000000009f800000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0x9f800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-000000009f800000
    [ 0.000000] 0000000000 - 0080000000 page 1G
    [ 0.000000] 0080000000 - 009f800000 page 2M
    [ 0.000000] kernel direct mapping tables up to 9f800000 @ 1fffe000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000043f000000
    [ 0.000000] 0100000000 - 0400000000 page 1G
    [ 0.000000] 0400000000 - 043f000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 43f000000 @ 9f7fe000-9f800000
    [ 0.000000] RAMDISK: 79bca000 - 7ffff000
    [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 000000009db97080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 000000009db9cf90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
    [ 0.000000] ACPI: DSDT 000000009db97190 05DFE (v02 ALASKA A M I 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 000000009dba6d80 00040
    [ 0.000000] ACPI: APIC 000000009db9d088 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 000000009db9d100 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 000000009db9d148 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
    [ 0.000000] ACPI: HPET 000000009db9d188 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
    [ 0.000000] ACPI: IFEU 000000009db9d1c0 00042 (v01 ALASKA A M I 01072009 00000000)
    [ 0.000000] ACPI: BGRT 000000009db9d208 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 000000009db9d240 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 000000009db9d8f8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: IVRS 000000009db9ddb0 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
    [ 0.000000] ACPI: CRAT 000000009db9de20 001F8 (v01 AMD AGESA 00000001 AMD 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000043f000000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000043f000000
    [ 0.000000] NODE_DATA [000000043effb000 - 000000043effffff]
    [ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042ee00000-ffff88043c7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0043f000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[6] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0009d575
    [ 0.000000] 0: 0x0009e9d3 -> 0x0009e9d4
    [ 0.000000] 0: 0x0009ebda -> 0x0009f04c
    [ 0.000000] 0: 0x0009f7dd -> 0x0009f800
    [ 0.000000] 0: 0x00100001 -> 0x0043f000
    [ 0.000000] On node 0 totalpages: 4049304
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 627267 pages, LIFO batch:31
    [ 0.000000] Normal zone: 46536 pages used for memmap
    [ 0.000000] Normal zone: 3357239 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 000000009d575000 - 000000009d856000
    [ 0.000000] PM: Registered nosave memory: 000000009d856000 - 000000009dbae000
    [ 0.000000] PM: Registered nosave memory: 000000009dbae000 - 000000009e9d3000
    [ 0.000000] PM: Registered nosave memory: 000000009e9d4000 - 000000009ebda000
    [ 0.000000] PM: Registered nosave memory: 000000009f04c000 - 000000009f7dd000
    [ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
    [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
    [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
    [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
    [ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
    [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
    [ 0.000000] Allocating PCI resources starting at 9f800000 (gap: 9f800000:5f400000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88043ec00000 s79360 r8192 d23040 u524288
    [ 0.000000] pcpu-alloc: s79360 r8192 d23040 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3988427
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 15793100k/17809408k available (4239k kernel code, 1612192k absent, 404116k reserved, 5184k data, 732k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 130023424 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: Unable to calibrate against PIT
    [ 0.000000] TSC: using HPET reference calibration
    [ 0.000000] Detected 3593.482 MHz processor.
    [ 0.030003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.96 BogoMIPS (lpj=35934820)
    [ 0.030067] pid_max: default: 32768 minimum: 301
    [ 0.030186] Security Framework initialized
    [ 0.030219] AppArmor: AppArmor disabled by boot time parameter
    [ 0.031478] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.038170] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.042321] Mount-cache hash table entries: 256
    [ 0.042958] Initializing cgroup subsys cpuacct
    [ 0.043012] Initializing cgroup subsys memory
    [ 0.043055] Initializing cgroup subsys devices
    [ 0.043086] Initializing cgroup subsys freezer
    [ 0.043118] Initializing cgroup subsys net_cls
    [ 0.043149] Initializing cgroup subsys blkio
    [ 0.043215] tseg: 009f800000
    [ 0.043216] CPU: Physical Processor ID: 0
    [ 0.043248] CPU: Processor Core ID: 0
    [ 0.043279] mce: CPU supports 7 MCE banks
    [ 0.044338] ACPI: Core revision 20110413
    [ 0.050017] ftrace: allocating 16878 entries in 67 pages
    [ 0.060590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.160953] CPU0: AMD A6-5400K APU with Radeon(tm) HD Graphics stepping 01
    [ 0.170000] Performance Events: AMD Family 15h PMU driver.
    [ 0.170000] ... version: 0
    [ 0.170000] ... bit width: 48
    [ 0.170000] ... generic registers: 6
    [ 0.170000] ... value mask: 0000ffffffffffff
    [ 0.170000] ... max period: 00007fffffffffff
    [ 0.170000] ... fixed-purpose events: 0
    [ 0.170000] ... event mask: 000000000000003f
    [ 0.170000] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.170000] Booting Node 0, Processors #1
    [ 0.170000] smpboot cpu 1: start_ip = 99000
    [ 7.443437] CPU1: Not responding.
    [ 7.445038] Brought up 1 CPUs
    [ 7.445164] Total of 1 processors activated (7186.96 BogoMIPS).
    [ 7.449107] devtmpfs: initialized
    [ 7.482442] PM: Registering ACPI NVS region at 9d856000 (3506176 bytes)
    [ 7.486598] PM: Registering ACPI NVS region at 9e9d4000 (2121728 bytes)
    [ 7.493031] NET: Registered protocol family 16
    [ 7.496249] Extended Config Space enabled on 0 nodes
    [ 7.496483] ACPI: bus type pci registered
    [ 7.498432] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 7.498554] PCI: not using MMCONFIG
    [ 7.498978] PCI: Using configuration type 1 for base access
    [ 7.499066] PCI: Using configuration type 1 for extended access
    [ 7.527324] bio: create slab <bio-0> at 0
    [ 7.601576] ACPI: EC: Look up EC in DSDT
    [ 7.685139] ACPI: Executed 1 blocks of module-level executable AML code
    [ 7.830050] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 7.845972] ACPI: Interpreter enabled
    [ 7.846060] ACPI: (supports S0 S3 S4 S5)
    [ 7.847202] ACPI: Using IOAPIC for interrupt routing
    [ 7.850557] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 7.851641] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 10.009318] ACPI: No dock devices found.
    [ 10.009448] HEST: Table not found.
    [ 10.009563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 10.018400] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 10.028017] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
    [ 10.028139] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
    [ 10.028263] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
    [ 10.028386] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 10.028508] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 10.028639] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 10.029075] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff]
    [ 10.029299] pci 0000:00:00.0: [1022:1410] type 0 class 0x000600
    [ 10.030321] pci 0000:00:00.2: [1022:1419] type 0 class 0x000806
    [ 10.032320] pci 0000:00:01.0: [1002:9991] type 0 class 0x000300
    [ 10.032465] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
    [ 10.032576] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
    [ 10.032990] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
    [ 10.034009] pci 0000:00:01.0: supports D1 D2
    [ 10.034262] pci 0000:00:01.1: [1002:9902] type 0 class 0x000403
    [ 10.034406] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
    [ 10.035595] pci 0000:00:01.1: supports D1 D2
    [ 10.036209] pci 0000:00:02.0: [1022:1412] type 1 class 0x000604
    [ 10.037405] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 10.037463] pci 0000:00:02.0: PME# disabled
    [ 10.038065] pci 0000:00:04.0: [1022:1414] type 1 class 0x000604
    [ 10.039258] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 10.039316] pci 0000:00:04.0: PME# disabled
    [ 10.040227] pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03
    [ 10.040423] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
    [ 10.041630] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    [ 10.041993] pci 0000:00:10.0: PME# disabled
    [ 10.042315] pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03
    [ 10.042510] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
    [ 10.044002] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
    [ 10.044059] pci 0000:00:10.1: PME# disabled
    [ 10.044424] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
    [ 10.044632] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
    [ 10.045026] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
    [ 10.045141] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
    [ 10.045255] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
    [ 10.045372] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
    [ 10.045486] pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
    [ 10.046377] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
    [ 10.046528] pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
    [ 10.047596] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
    [ 10.048081] pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
    [ 10.049232] pci 0000:00:12.2: supports D1 D2
    [ 10.049268] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 10.049324] pci 0000:00:12.2: PME# disabled
    [ 10.049558] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
    [ 10.050126] pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
    [ 10.051154] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
    [ 10.051363] pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
    [ 10.052509] pci 0000:00:13.2: supports D1 D2
    [ 10.052545] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 10.052603] pci 0000:00:13.2: PME# disabled
    [ 10.053123] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
    [ 10.054237] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
    [ 10.054467] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 10.055437] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 10.055495] pci 0000:00:14.2: PME# disabled
    [ 10.055640] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
    [ 10.056993] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
    [ 10.057448] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
    [ 10.057598] pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
    [ 10.058964] pci 0000:00:18.0: [1022:1400] type 0 class 0x000600
    [ 10.059537] pci 0000:00:18.1: [1022:1401] type 0 class 0x000600
    [ 10.060476] pci 0000:00:18.2: [1022:1402] type 0 class 0x000600
    [ 10.061308] pci 0000:00:18.3: [1022:1403] type 0 class 0x000600
    [ 10.062308] pci 0000:00:18.4: [1022:1404] type 0 class 0x000600
    [ 10.063128] pci 0000:00:18.5: [1022:1405] type 0 class 0x000600
    [ 10.064976] pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
    [ 10.065120] pci 0000:01:00.0: reg 10: [mem 0xfeac0000-0xfeadffff]
    [ 10.065243] pci 0000:01:00.0: reg 14: [mem 0xfea00000-0xfea7ffff]
    [ 10.065364] pci 0000:01:00.0: reg 18: [io 0xe000-0xe01f]
    [ 10.065487] pci 0000:01:00.0: reg 1c: [mem 0xfeae0000-0xfeae3fff]
    [ 10.066064] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeabffff pref]
    [ 10.066618] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 10.066975] pci 0000:01:00.0: PME# disabled
    [ 10.067368] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 10.067531] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 10.067587] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 10.067969] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 10.068963] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
    [ 10.069068] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
    [ 10.069308] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 10.069469] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 10.070508] pci 0000:02:00.0: supports D1 D2
    [ 10.070544] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 10.070602] pci 0000:02:00.0: PME# disabled
    [ 10.071304] pci 0000:00:04.0: PCI bridge to [bus 02-02]
    [ 10.071465] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    [ 10.071522] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 10.071601] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 10.072247] pci 0000:03:06.0: [1095:3114] type 0 class 0x000104
    [ 10.072438] pci 0000:03:06.0: reg 10: [io 0xc040-0xc047]
    [ 10.072558] pci 0000:03:06.0: reg 14: [io 0xc030-0xc033]
    [ 10.072989] pci 0000:03:06.0: reg 18: [io 0xc020-0xc027]
    [ 10.073069] pci 0000:03:06.0: reg 1c: [io 0xc010-0xc013]
    [ 10.073186] pci 0000:03:06.0: reg 20: [io 0xc000-0xc00f]
    [ 10.073303] pci 0000:03:06.0: reg 24: [mem 0xfe980000-0xfe9803ff]
    [ 10.073420] pci 0000:03:06.0: reg 30: [mem 0xfe900000-0xfe97ffff pref]
    [ 10.074010] pci 0000:03:06.0: supports D1 D2
    [ 10.074426] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 10.074564] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 10.074621] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 10.074981] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 10.074993] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 10.075032] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 10.075071] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 10.075108] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 10.075146] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 10.075183] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 10.075220] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 10.075413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 10.087428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [ 10.092229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
    [ 10.093609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
    [ 10.098972] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 10.105356] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 10.469632] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.473051] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.476159] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.479249] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.482314] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.485047] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.487433] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.490344] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.494044] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 10.494442] vgaarb: loaded
    [ 10.494556] vgaarb: bridge control possible 0000:00:01.0
    [ 10.496198] PCI: Using ACPI for IRQ routing
    [ 10.574000] PCI: pci_cache_line_size set to 64 bytes
    [ 10.575540] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 10.575579] reserve RAM buffer: 000000009d575000 - 000000009fffffff
    [ 10.575976] reserve RAM buffer: 000000009e9d4000 - 000000009fffffff
    [ 10.576002] reserve RAM buffer: 000000009f04c000 - 000000009fffffff
    [ 10.576049] reserve RAM buffer: 000000009f800000 - 000000009fffffff
    [ 10.576088] reserve RAM buffer: 000000043f000000 - 000000043fffffff
    [ 10.579048] NetLabel: Initializing
    [ 10.579161] NetLabel: domain hash size = 128
    [ 10.579273] NetLabel: protocols = UNLABELED CIPSOv4
    [ 10.580048] NetLabel: unlabeled traffic allowed by default
    [ 10.580185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 10.580995] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 10.583427] Switching to clocksource hpet
    [ 10.586451] Switched to NOHz mode on CPU #0
    [ 10.846011] pnp: PnP ACPI init
    [ 10.846721] ACPI: bus type pnp registered
    [ 10.851432] pnp 00:00: [bus 00-ff]
    [ 10.851473] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 10.851513] pnp 00:00: [io 0x0000-0x03af window]
    [ 10.851555] pnp 00:00: [io 0x03e0-0x0cf7 window]
    [ 10.851596] pnp 00:00: [io 0x03b0-0x03df window]
    [ 10.851637] pnp 00:00: [io 0x0d00-0xffff window]
    [ 10.851678] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 10.851718] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 10.851759] pnp 00:00: [mem 0xc0000000-0xffffffff window]
    [ 10.851799] pnp 00:00: [mem 0x00000000 window]
    [ 10.853412] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 10.854370] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 10.855576] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 10.855722] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 10.880640] pnp 00:02: [io 0x0010-0x001f]
    [ 10.880679] pnp 00:02: [io 0x0022-0x003f]
    [ 10.880718] pnp 00:02: [io 0x0063]
    [ 10.880756] pnp 00:02: [io 0x0065]
    [ 10.880795] pnp 00:02: [io 0x0067-0x006f]
    [ 10.880834] pnp 00:02: [io 0x0072-0x007f]
    [ 10.880873] pnp 00:02: [io 0x0080]
    [ 10.880912] pnp 00:02: [io 0x0084-0x0086]
    [ 10.880975] pnp 00:02: [io 0x0088]
    [ 10.881014] pnp 00:02: [io 0x008c-0x008e]
    [ 10.881052] pnp 00:02: [io 0x0090-0x009f]
    [ 10.881387] pnp 00:02: [io 0x00a2-0x00bf]
    [ 10.881422] pnp 00:02: [io 0x00b1]
    [ 10.881458] pnp 00:02: [io 0x00e0-0x00ef]
    [ 10.881494] pnp 00:02: [io 0x04d0-0x04d1]
    [ 10.881529] pnp 00:02: [io 0x040b]
    [ 10.881565] pnp 00:02: [io 0x04d6]
    [ 10.881601] pnp 00:02: [io 0x0c00-0x0c01]
    [ 10.881636] pnp 00:02: [io 0x0c14]
    [ 10.881672] pnp 00:02: [io 0x0c50-0x0c51]
    [ 10.881708] pnp 00:02: [io 0x0c52]
    [ 10.881743] pnp 00:02: [io 0x0c6c]
    [ 10.881779] pnp 00:02: [io 0x0c6f]
    [ 10.881815] pnp 00:02: [io 0x0cd0-0x0cd1]
    [ 10.881851] pnp 00:02: [io 0x0cd2-0x0cd3]
    [ 10.881886] pnp 00:02: [io 0x0cd4-0x0cd5]
    [ 10.881924] pnp 00:02: [io 0x0cd6-0x0cd7]
    [ 10.881959] pnp 00:02: [io 0x0cd8-0x0cdf]
    [ 10.881997] pnp 00:02: [io 0x0800-0x089f]
    [ 10.882033] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    [ 10.882376] pnp 00:02: [io 0x0000-0x000f]
    [ 10.882401] pnp 00:02: [io 0x0b20-0x0b3f]
    [ 10.882438] pnp 00:02: [io 0x0900-0x090f]
    [ 10.882474] pnp 00:02: [io 0x0910-0x091f]
    [ 10.882512] pnp 00:02: [io 0xfe00-0xfefe]
    [ 10.882547] pnp 00:02: [io 0x0060-0x005f disabled]
    [ 10.882583] pnp 00:02: [io 0x0064-0x0063 disabled]
    [ 10.882619] pnp 00:02: [mem 0xfec00000-0xfec00fff]
    [ 10.882656] pnp 00:02: [mem 0xfee00000-0xfee00fff]
    [ 10.882692] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
    [ 10.882728] pnp 00:02: [mem 0xfed61000-0xfed70fff]
    [ 10.882763] pnp 00:02: [mem 0xfec10000-0xfec10fff]
    [ 10.882801] pnp 00:02: [mem 0xfed00000-0xfed00fff]
    [ 10.882836] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 10.884490] system 00:02: [io 0x04d0-0x04d1] has been reserved
    [ 10.884616] system 00:02: [io 0x040b] has been reserved
    [ 10.884742] system 00:02: [io 0x04d6] has been reserved
    [ 10.884866] system 00:02: [io 0x0c00-0x0c01] has been reserved
    [ 10.884988] system 00:02: [io 0x0c14] has been reserved
    [ 10.885440] system 00:02: [io 0x0c50-0x0c51] has been reserved
    [ 10.885563] system 00:02: [io 0x0c52] has been reserved
    [ 10.885685] system 00:02: [io 0x0c6c] has been reserved
    [ 10.885807] system 00:02: [io 0x0c6f] has been reserved
    [ 10.885929] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    [ 10.886375] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    [ 10.886496] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
    [ 10.886619] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
    [ 10.886741] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
    [ 10.886863] system 00:02: [io 0x0800-0x089f] has been reserved
    [ 10.886986] system 00:02: [io 0x0b20-0x0b3f] has been reserved
    [ 10.887433] system 00:02: [io 0x0900-0x090f] has been reserved
    [ 10.887557] system 00:02: [io 0x0910-0x091f] has been reserved
    [ 10.887679] system 00:02: [io 0xfe00-0xfefe] has been reserved
    [ 10.887806] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 10.887928] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 10.888360] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 10.888468] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 10.888593] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 10.888715] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
    [ 10.888840] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
    [ 10.888981] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.892417] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
    [ 10.892456] pnp 00:03: [io 0x0220-0x0227]
    [ 10.892494] pnp 00:03: [io 0x0228-0x0237]
    [ 10.892534] pnp 00:03: [io 0x0a20-0x0a2f]
    [ 10.893890] system 00:03: [io 0x0220-0x0227] has been reserved
    [ 10.894018] system 00:03: [io 0x0228-0x0237] has been reserved
    [ 10.894460] system 00:03: [io 0x0a20-0x0a2f] has been reserved
    [ 10.894605] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.901525] pnp 00:04: [dma 4]
    [ 10.901565] pnp 00:04: [io 0x0000-0x000f]
    [ 10.901629] pnp 00:04: [io 0x0081-0x0083]
    [ 10.901667] pnp 00:04: [io 0x0087]
    [ 10.901706] pnp 00:04: [io 0x0089-0x008b]
    [ 10.901745] pnp 00:04: [io 0x008f]
    [ 10.901784] pnp 00:04: [io 0x00c0-0x00df]
    [ 10.902753] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 10.903004] pnp 00:05: [io 0x0070-0x0071]
    [ 10.903394] pnp 00:05: [irq 8]
    [ 10.904399] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 10.904582] pnp 00:06: [io 0x0061]
    [ 10.905587] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 10.906373] pnp 00:07: [io 0x0010-0x001f]
    [ 10.906408] pnp 00:07: [io 0x0022-0x003f]
    [ 10.906444] pnp 00:07: [io 0x0044-0x005f]
    [ 10.906481] pnp 00:07: [io 0x0072-0x007f]
    [ 10.906517] pnp 00:07: [io 0x0080]
    [ 10.906555] pnp 00:07: [io 0x0084-0x0086]
    [ 10.906592] pnp 00:07: [io 0x0088]
    [ 10.906627] pnp 00:07: [io 0x008c-0x008e]
    [ 10.906663] pnp 00:07: [io 0x0090-0x009f]
    [ 10.906699] pnp 00:07: [io 0x00a2-0x00bf]
    [ 10.906735] pnp 00:07: [io 0x00e0-0x00ef]
    [ 10.906771] pnp 00:07: [io 0x04d0-0x04d1]
    [ 10.908470] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 10.908615] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.908803] pnp 00:08: [io 0x00f0-0x00ff]
    [ 10.908895] pnp 00:08: [irq 13]
    [ 10.910515] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 10.912466] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.916697] pnp 00:0a: [mem 0xa0000000-0xbfffffff]
    [ 10.918472] system 00:0a: [mem 0xa0000000-0xbfffffff] has been reserved
    [ 10.918619] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.920584] pnp 00:0b: [mem 0xfeb80000-0xfebfffff]
    [ 10.922399] system 00:0b: [mem 0xfeb80000-0xfebfffff] has been reserved
    [ 10.922543] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.927499] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
    [ 10.928848] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 10.928958] pnp: PnP ACPI: found 13 devices
    [ 10.929375] ACPI: ACPI bus type pnp unregistered
    [ 10.990732] PCI: max bus depth: 1 pci_try_num: 2
    [ 10.990936] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 10.991384] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 10.991521] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 10.991658] pci 0000:00:02.0: bridge window [mem pref disabled]
    [ 10.991821] pci 0000:00:04.0: PCI bridge to [bus 02-02]
    [ 10.991949] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    [ 10.992386] pci 0000:00:04.0: bridge window [mem disabled]
    [ 10.992514] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 10.992683] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 10.992810] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 10.992960] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 10.993389] pci 0000:00:14.4: bridge window [mem pref disabled]
    [ 10.993675] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 10.993815] pci 0000:00:02.0: setting latency timer to 64
    [ 10.993994] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 10.994461] pci 0000:00:04.0: setting latency timer to 64
    [ 10.994566] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 10.994605] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 10.994644] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 10.994682] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 10.994721] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 10.994760] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 10.994799] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 10.994837] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 10.994876] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 10.994915] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    [ 10.994954] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 10.994993] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 10.995032] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
    [ 10.995368] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 10.995377] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 10.995414] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 10.995449] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 10.995485] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 10.995523] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 10.995559] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
    [ 10.996013] NET: Registered protocol family 2
    [ 11.011431] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 11.044698] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 11.051435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 11.051803] TCP: Hash tables configured (established 524288 bind 65536)
    [ 11.051921] TCP reno registered
    [ 11.052935] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 11.054372] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 11.056540] NET: Registered protocol family 1
    [ 11.056817] pci 0000:00:01.0: Boot video device
    [ 11.057014] pci 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 11.057627] pci 0000:00:10.0: PCI INT A disabled
    [ 11.057906] pci 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 11.058488] pci 0000:00:10.1: PCI INT B disabled
    [ 11.058705] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 11.150025] pci 0000:00:12.0: PCI INT A disabled
    [ 11.150071] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 11.150124] pci 0000:00:12.2: PCI INT B disabled
    [ 11.150160] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 11.240018] pci 0000:00:13.0: PCI INT A disabled
    [ 11.240057] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 11.240102] pci 0000:00:13.2: PCI INT B disabled
    [ 11.240147] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 11.330018] pci 0000:00:14.5: PCI INT C disabled
    [ 11.330066] PCI: CLS 64 bytes, default 64
    [ 11.330109] Unpacking initramfs...
    [ 0.040000] Kernel panic - not syncing: smp_callin: CPU1 started up but did not get a callout!
    [ 0.040000]
    [ 0.040000] Pid: 0, comm: kworker/0:0 Not tainted 3.0.46-1-lts #1
    [ 0.040000] Call Trace:
    [ 0.040000] [<ffffffff8140f6cd>] panic+0x91/0x197
    [ 0.040000] [<ffffffff8140884c>] start_secondary+0xcb/0x1fe
    [ 26.201608] Freeing initrd memory: 102612k freed
    [ 26.228111] pci 0000:00:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 26.228318] pci 0000:00:00.2: irq 40 for MSI/MSI-X
    [ 26.228396] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA
    [ 26.240635] AMD-Vi: Lazy IO/TLB flushing enabled
    [ 26.240671] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 26.240706] Placing 64MB software IO TLB between ffff880099575000 - ffff88009d575000
    [ 26.240743] software IO TLB at phys 0x99575000 - 0x9d575000
    [ 26.241067] audit: initializing netlink socket (disabled)
    [ 26.241110] type=2000 audit(1356177972.230:1): initialized
    [ 26.250693] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 26.254005] VFS: Disk quotas dquot_6.5.2
    [ 26.254149] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 26.254346] msgmni has been set to 31046
    [ 26.254555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 26.254612] io scheduler noop registered
    [ 26.254646] io scheduler deadline registered (default)
    [ 26.254719] io scheduler cfq registered
    [ 26.254848] pcieport 0000:00:02.0: setting latency timer to 64
    [ 26.254910] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
    [ 26.254987] pcieport 0000:00:04.0: setting latency timer to 64
    [ 26.255045] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
    [ 26.255142] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
    [ 26.255177] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 26.255212] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
    [ 26.255257] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
    [ 26.255291] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 26.255327] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
    [ 26.255434] ERST: Table is not found!
    [ 26.255511] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 26.255875] Linux agpgart interface v0.103
    [ 26.255970] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 26.256358] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 26.256395] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 26.256512] mousedev: PS/2 mouse device common for all mice
    [ 26.256588] rtc_cmos 00:05: RTC can wake from S4
    [ 26.256715] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 26.256781] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 26.256827] cpuidle: using governor ladder
    [ 26.256868] cpuidle: using governor menu
    [ 26.257182] TCP cubic registered
    [ 26.257413] NET: Registered protocol family 10
    [ 26.258198] NET: Registered protocol family 17
    [ 26.258233] Registering the dns_resolver key type
    [ 26.258395] PM: Hibernation image not present or could not be loaded.
    [ 26.258450] registered taskstats version 1
    [ 26.259761] rtc_cmos 00:05: setting system clock to 2012-12-22 12:06:13 UTC (1356177973)
    [ 26.261125] Initializing network drop monitor service
    [ 26.263013] Freeing unused kernel memory: 732k freed
    [ 26.263239] Write protecting the kernel read-only data: 8192k
    [ 26.272919] Freeing unused kernel memory: 1888k freed
    [ 26.277038] Freeing unused kernel memory: 696k freed
    [ 26.303407] systemd-udevd[37]: starting version 194
    [ 27.541378] Refined TSC clocksource calibration: 3593.465 MHz.
    [ 27.541426] Switching to clocksource tsc
    [ 30.186206] HDA Intel 0000:00:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [ 30.186313] HDA Intel 0000:00:01.1: irq 43 for MSI/MSI-X
    [ 30.186378] HDA Intel 0000:00:01.1: setting latency timer to 64
    [ 30.191054] usbcore: registered new interface driver usbfs
    [ 30.191133] usbcore: registered new interface driver hub
    [ 30.197110] SCSI subsystem initialized
    [ 30.216692] usbcore: registered new device driver usb
    [ 30.220148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 30.232290] input: PC Speaker as /devices/platform/pcspkr/input/input0
    [ 30.234124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 30.239267] libata version 3.00 loaded.
    [ 30.244294] ACPI: acpi_idle registered with cpuidle
    [ 30.246226] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 30.246282] ACPI: Power Button [PWRB]
    [ 30.246380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 30.246418] ACPI: Power Button [PWRF]
    [ 30.249692] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
    [ 30.249737] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 30.249802] e1000e 0000:01:00.0: Disabling ASPM L0s L1
    [ 30.249846] e1000e 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 30.249902] e1000e 0000:01:00.0: setting latency timer to 64
    [ 30.250227] e1000e 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 30.250263] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
    [ 30.250307] e1000e 0000:01:00.0: irq 46 for MSI/MSI-X
    [ 30.252812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 30.252873] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 30.252954] r8169 0000:02:00.0: setting latency timer to 64
    [ 30.253001] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
    [ 30.253103] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 30.253760] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000187e000, 94:de:80:06:0b:c2, XID 0c900800 IRQ 47
    [ 30.253799] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
    [ 30.255615] sata_sil 0000:03:06.0: version 2.4
    [ 30.255694] sata_sil 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 30.255763] sata_sil 0000:03:06.0: Applying R_ERR on DMA activate FIS errata fix
    [ 30.259490] scsi0 : sata_sil
    [ 30.262529] scsi1 : sata_sil
    [ 30.265318] scsi2 : sata_sil
    [ 30.268147] scsi3 : sata_sil
    [ 30.268259] ata1: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980080 irq 20
    [ 30.268301] ata2: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9800c0 irq 20
    [ 30.268350] ata3: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980280 irq 20
    [ 30.268389] ata4: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9802c0 irq 20
    [ 30.375388] e1000e 0000:01:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:0c:a8:da
    [ 30.375437] e1000e 0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
    [ 30.375481] e1000e 0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-007
    [ 30.620035] ata1: SATA link down (SStatus 0 SControl 310)
    [ 30.970035] ata2: SATA link down (SStatus 0 SControl 310)
    [ 31.320029] ata3: SATA link down (SStatus 0 SControl 310)
    [ 31.670023] ata4: SATA link down (SStatus 0 SControl 310)
    [ 31.674284] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 31.674524] HDMI: no space for converter 10
    [ 31.674615] HDMI: no space for converter 12
    [ 31.674967] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
    [ 31.675144] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 31.776299] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 31.776372] xhci_hcd 0000:00:10.0: setting latency timer to 64
    [ 31.776418] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 31.776483] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
    [ 31.776563] QUIRK: Enable AMD PLL fix
    [ 31.776792] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
    [ 31.776885] xhci_hcd 0000:00:10.0: irq 48 for MSI/MSI-X
    [ 31.776920] xhci_hcd 0000:00:10.0: irq 49 for MSI/MSI-X
    [ 31.777146] xHCI xhci_add_endpoint called for root hub
    [ 31.777190] xHCI xhci_check_bandwidth called for root hub
    [ 31.777261] hub 1-0:1.0: USB hub found
    [ 31.777297] hub 1-0:1.0: 2 ports detected
    [ 31.777433] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 31.777473] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
    [ 31.780285] xHCI xhci_add_endpoint called for root hub
    [ 31.780329] xHCI xhci_check_bandwidth called for root hub
    [ 31.780399] hub 2-0:1.0: USB hub found
    [ 31.780436] hub 2-0:1.0: 2 ports detected
    [ 31.780543] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 31.780600] xhci_hcd 0000:00:10.1: setting latency timer to 64
    [ 31.780635] xhci_hcd 0000:00:10.1: xHCI Host Controller
    [ 31.780673] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    [ 31.780929] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
    [ 31.781018] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
    [ 31.781053] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
    [ 31.781245] xHCI xhci_add_endpoint called for root hub
    [ 31.781289] xHCI xhci_check_bandwidth called for root hub
    [ 31.781358] hub 3-0:1.0: USB hub found
    [ 31.781393] hub 3-0:1.0: 2 ports detected
    [ 31.781502] xhci_hcd 0000:00:10.1: xHCI Host Controller
    [ 31.781554] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
    [ 31.784397] xHCI xhci_add_endpoint called for root hub
    [ 31.784430] xHCI xhci_check_bandwidth called for root hub
    [ 31.784493] hub 4-0:1.0: USB hub found
    [ 31.784540] hub 4-0:1.0: 2 ports detected
    [ 31.785260] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 31.785314] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 31.785363] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
    [ 31.785405] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 31.785467] ehci_hcd 0000:00:12.2: debug port 1
    [ 31.785526] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4f000
    [ 31.800124] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 31.800381] hub 5-0:1.0: USB hub found
    [ 31.800426] hub 5-0:1.0: 5 ports detected
    [ 31.800575] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 31.800648] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 31.800698] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
    [ 31.800740] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 31.800804] ehci_hcd 0000:00:13.2: debug port 1
    [ 31.800861] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4d000
    [ 31.820016] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 31.820236] hub 6-0:1.0: USB hub found
    [ 31.820271] hub 6-0:1.0: 5 ports detected
    [ 31.820930] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 31.820996] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 31.821039] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
    [ 31.821105] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
    [ 31.884261] hub 7-0:1.0: USB hub found
    [ 31.884311] hub 7-0:1.0: 5 ports detected
    [ 31.884462] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 31.884533] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 31.884580] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8
    [ 31.884644] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
    [ 31.944186] hub 8-0:1.0: USB hub found
    [ 31.944235] hub 8-0:1.0: 5 ports detected
    [ 31.944362] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 31.944416] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 31.944452] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
    [ 31.944510] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
    [ 32.004245] hub 9-0:1.0: USB hub found
    [ 32.004283] hub 9-0:1.0: 2 ports detected
    [ 32.004581] ahci 0000:00:11.0: version 3.0
    [ 32.004627] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 32.004727] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
    [ 32.004892] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 7 ports 6 Gbps 0xfd impl SATA mode
    [ 32.004931] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 32.009602] scsi4 : ahci
    [ 32.009824] scsi5 : ahci
    [ 32.010050] scsi6 : ahci
    [ 32.010213] scsi7 : ahci
    [ 32.010363] scsi8 : ahci
    [ 32.010529] scsi9 : ahci
    [ 32.010677] scsi10 : ahci
    [ 32.010837] scsi11 : ahci
    [ 32.011601] ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 52
    [ 32.012773] ata6: DUMMY
    [ 32.012806] ata7: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 52
    [ 32.012845] ata8: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 52
    [ 32.012893] ata9: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 52
    [ 32.012930] ata10: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 52
    [ 32.012969] ata11: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51400 irq 52
    [ 32.013016] ata12: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51480 irq 52
    [ 32.120025] usb 5-3: new high speed USB device number 2 using ehci_hcd
    [ 32.274376] Initializing USB Mass Storage driver...
    [ 32.274825] scsi12 : usb-storage 5-3:1.0
    [ 32.274957] usbcore: registered new interface driver usb-storage
    [ 32.274991] USB Mass Storage support registered.
    [ 32.560018] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 32.560079] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 32.560137] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 32.560196] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 32.560242] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 32.560299] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 32.560580] ata7.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
    [ 32.560626] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.560947] ata11.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
    [ 32.560993] ata11.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 32.561209] ata7.00: configured for UDMA/133
    [ 32.561773] ata11.00: configured for UDMA/133
    [ 32.563779] ata8.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
    [ 32.563814] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.564285] ata5.00: ATA-6: WDC WD2500JD-00HBB0, 08.02D08, max UDMA/133
    [ 32.564327] ata5.00: 488397168 sectors, multi 16: LBA48
    [ 32.566291] ata10.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
    [ 32.566329] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.566492] ata12.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
    [ 32.566526] ata12.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.567782] ata8.00: configured for UDMA/133
    [ 32.569759] ata5.00: configured for UDMA/133
    [ 32.569893] scsi 4:0:0:0: Direct-Access ATA WDC WD2500JD-00H 08.0 PQ: 0 ANSI: 5
    [ 32.570286] scsi 6:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
    [ 32.570502] scsi 7:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
    [ 32.572474] ata10.00: configured for UDMA/133
    [ 32.572682] ata12.00: configured for UDMA/133
    [ 32.660017] usb 7-4: new low speed USB device number 2 using ohci_hcd
    [ 32.868292] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.0/input/input4
    [ 32.868415] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input0
    [ 32.881147] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.1/input/input5
    [ 32.881240] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input1
    [ 32.881304] usbcore: registered new interface driver usbhid
    [ 32.881338] usbhid: USB HID core driver
    [ 33.271305] scsi 12:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2
    [ 33.280033] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 33.305314] ata9.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
    [ 33.305349] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 33.314972] ata9.00: configured for UDMA/133
    [ 33.315074] scsi 8:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
    [ 33.315323] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
    [ 33.315536] scsi 10:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
    [ 33.315746] scsi 11:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
    [ 33.333300] sd 11:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333360] sd 7:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333415] sd 10:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333463] sd 9:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333524] sd 8:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333575] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333613] sd 6:0:0:0: [sdb] 4096-byte physical blocks
    [ 33.333753] sd 10:0:0:0: [sdg] Write Protect is off
    [ 33.333787] sd 10:0:0:0: [sdg] Mode Sense: 00 3a 00 00
    [ 33.333950] sd 8:0:0:0: [sde] Write Protect is off
    [ 33.333984] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
    [ 33.334046] sd 9:0:0:0: [sdf] Write Protect is off
    [ 33.334079] sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00
    [ 33.334138] sd 7:0:0:0: [sdc] Write Protect is off
    [ 33.334172] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 33.334224] sd 11:0:0:0: [sdh] Write Protect is off
    [ 33.334257] sd 11:0:0:0: [sdh] Mode Sense: 00 3a 00 00
    [ 33.334358] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.334526] sd 6:0:0:0: [sdb] Write Protect is off
    [ 33.334561] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 33.334629] sd 11:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.334808] sd 12:0:0:0: [sdd] 7837696 512-byte logical blocks: (4.01 GB/3.73 GiB)
    [ 33.334865] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.334982] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.335109] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.335222] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.335777] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 33.335862] sd 12:0:0:0: [sdd] Write Protect is off
    [ 33.335896] sd 12:0:0:0: [sdd] Mode Sense: 03 00 00 00
    [ 33.336251] sd 4:0:0:0: [sda] Write Protect is off
    [ 33.336285] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 33.336346] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.336757] sd 12:0:0:0: [sdd] No Caching mode page present
    [ 33.336792] sd 12:0:0:0: [sdd] Assuming drive cache: write through
    [ 33.339872] sd 12:0:0:0: [sdd] No Caching mode page present
    [ 33.339909] sd 12:0:0:0: [sdd] Assuming drive cache: write through
    [ 33.344926] sdd: sdd1
    [ 33.347492] sd 12:0:0:0: [sdd] No Caching mode page present
    [ 33.347539] sd 12:0:0:0: [sdd] Assuming drive cache: write through
    [ 33.347574] sd 12:0:0:0: [sdd] Attached SCSI removable disk
    [ 33.376773] sde: sde1
    [ 33.377154] sd 8:0:0:0: [sde] Attached SCSI disk
    [ 33.377403] sdh: sdh1
    [ 33.377691] sd 11:0:0:0: [sdh] Attached SCSI disk
    [ 33.380652] sdg: sdg1
    [ 33.381033] sd 10:0:0:0: [sdg] Attached SCSI disk
    [ 33.395456] sdf: sdf1
    [ 33.395801] sd 9:0:0:0: [sdf] Attached SCSI disk
    [ 33.397545] sdb: sdb1
    [ 33.397930] sd 6:0:0:0: [sdb] Attached SCSI disk
    [ 33.435935] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
    [ 33.436519] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 33.439473] mdadm: sending ioctl 800c0910 to a partition!
    [ 33.439519] mdadm: sending ioctl 800c0910 to a partition!
    [ 33.439696] mdadm: sending ioctl 1261 to a partition!
    [ 33.439728] mdadm: sending ioctl 1261 to a partition!
    [ 33.442061] mdadm: sending ioctl 1261 to a partition!
    [ 33.442108] mdadm: sending ioctl 1261 to a partition!
    [ 33.442467] mdadm: sending ioctl 1261 to a partition!
    [ 33.442502] mdadm: sending ioctl 1261 to a partition!
    [ 33.443944] mdadm: sending ioctl 1261 to a partition!
    [ 33.443981] mdadm: sending ioctl 1261 to a partition!
    [ 33.815407] sdc: sdc1
    [ 33.815744] sd 7:0:0:0: [sdc] Attached SCSI disk
    [ 33.819038] md: bind<sdg1>
    [ 33.823005] md: bind<sdh1>
    [ 33.830376] md: bind<sde1>
    [ 33.832743] md: raid0 personality registered for level 0
    [ 33.833265] bio: create slab <bio-1> at 1
    [ 33.833302] md/raid0:md127: looking at sdh1
    [ 33.833336] md/raid0:md127: comparing sdh1(3907026944) with sdh1(3907026944)
    [ 33.833414] md/raid0:md127: END
    [ 33.833446] md/raid0:md127: ==> UNIQUE
    [ 33.833478] md/raid0:md127: 1 zones
    [ 33.833511] md/raid0:md127: looking at sdg1
    [ 33.833554] md/raid0:md127: comparing sdg1(3907026944) with sdh1(3907026944)
    [ 33.833623] md/raid0:md127: EQUAL
    [ 33.833655] md/raid0:md127: FINAL 1 zones
    [ 33.833689] md/raid0:md127: done.
    [ 33.833733] md/raid0:md127: md_size is 7814053888 sectors.
    [ 33.833766] ******* md127 configuration *********
    [ 33.833798] zone0=[sdg1/sdh1/]
    [ 33.833947] zone offset=0kb device offset=0kb size=3907026944kb
    [ 33.833988] **********************************
    [ 33.833992]
    [ 33.835269] md127: detected capacity change from 0 to 4000795590656
    [ 33.838003] md: bind<sdb1>
    [ 33.842049] md: bind<sdf1>
    [ 33.844170] md127: unknown partition table
    [ 33.924815] md: bind<sdc1>
    [ 34.090011] raid6: int64x1 1791 MB/s
    [ 34.260030] raid6: int64x2 2819 MB/s
    [ 34.430025] raid6: int64x4 2663 MB/s
    [ 34.600019] raid6: int64x8 2518 MB/s
    [ 34.770025] raid6: sse2x1 5795 MB/s
    [ 34.940016] raid6: sse2x2 8139 MB/s
    [ 35.110014] raid6: sse2x4 10354 MB/s
    [ 35.110047] raid6: using algorithm sse2x4 (10354 MB/s)
    [ 35.110907] async_tx: api initialized (async)
    [ 35.111085] xor: automatically using best checksumming function: generic_sse
    [ 35.160010] generic_sse: 5798.000 MB/sec
    [ 35.160043] xor: using function: generic_sse (5798.000 MB/sec)
    [ 35.161180] md: raid6 personality registered for level 6
    [ 35.161216] md: raid5 personality registered for level 5
    [ 35.161249] md: raid4 personality registered for level 4
    [ 35.162194] md/raid:md126: device sdc1 operational as raid disk 3
    [ 35.162258] md/raid:md126: device sdf1 operational as raid disk 1
    [ 35.162302] md/raid:md126: device sdb1 operational as raid disk 0
    [ 35.162337] md/raid:md126: device sde1 operational as raid disk 2
    [ 35.162969] md/raid:md126: allocated 4272kB
    [ 35.164323] md/raid:md126: raid level 5 active with 4 out of 4 devices, algorithm 2
    [ 35.164368] RAID conf printout:
    [ 35.164401] --- level:5 rd:4 wd:4
    [ 35.164434] disk 0, o:1, dev:sdb1
    [ 35.164472] disk 1, o:1, dev:sdf1
    [ 35.164514] disk 2, o:1, dev:sde1
    [ 35.164547] disk 3, o:1, dev:sdc1
    [ 35.164615] md126: detected capacity change from 0 to 6000789159936
    [ 35.210084] md126: unknown partition table
    [ 37.116016] device-mapper: uevent: version 1.0.3
    [ 37.116160] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
    [ 48.147927] systemd[1]: systemd 194 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 48.148113] systemd[1]: Running in initial RAM disk.
    [ 48.148564] systemd[1]: Set hostname to <archboot>.
    [ 48.148763] systemd[1]: Initializing machine ID from random generator.
    [ 48.163323] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 48.163530] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 48.163664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 48.163714] systemd[1]: Starting Remote File Systems.
    [ 48.164039] systemd[1]: Reached target Remote File Systems.
    [ 48.164095] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 48.164379] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 48.164429] systemd[1]: Starting Delayed Shutdown Socket.
    [ 48.164734] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 48.164802] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 48.165217] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 48.165268] systemd[1]: Starting Encrypted Volumes.
    [ 48.165538] systemd[1]: Reached target Encrypted Volumes.
    [ 48.165666] systemd[1]: Starting udev Kernel Socket.
    [ 48.165964] systemd[1]: Listening on udev Kernel Socket.
    [ 48.166045] systemd[1]: Starting udev Control Socket.
    [ 48.166338] systemd[1]: Listening on udev Control Socket.
    [ 48.166395] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 48.166498] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 48.166557] systemd[1]: Starting Swap.
    [ 48.166826] systemd[1]: Reached target Swap.
    [ 48.166869] systemd[1]: Starting Journal Socket.
    [ 48.167200] systemd[1]: Listening on Journal Socket.
    [ 48.167260] systemd[1]: Started File System Check on Root Device.
    [ 48.167303] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 48.168421] systemd[1]: Starting Load Kernel Modules...
    [ 48.170881] systemd[1]: Starting Setup Virtual Console...
    [ 48.173799] FS-Cache: Loaded
    [ 48.177917] systemd[1]: Mounting POSIX Message Queue File System...
    [ 48.179690] systemd[1]: Mounting Huge Pages File System...
    [ 48.180633] systemd[1]: Starting Apply Kernel Variables...
    [ 48.181486] systemd[1]: Started Set Up Additional Binary Formats.
    [ 48.181595] systemd[1]: Starting udev Kernel Device Manager...
    [ 48.184266] systemd[1]: Mounting Debug File System...
    [ 48.185010] systemd[1]: Starting udev Coldplug all Devices...
    [ 48.185722] systemd[1]: Starting Journal Service...
    [ 48.186733] systemd[1]: Started Journal Service.
    [ 48.187650] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 48.187720] systemd[1]: Starting Local File Systems (Pre).
    [ 48.187982] systemd[1]: Reached target Local File Systems (Pre).
    [ 48.188037] systemd[1]: Mounting /tmp...
    [ 48.188726] systemd[1]: Starting Load Random Seed...
    [ 48.199278] systemd-udevd[1369]: starting version 194
    [ 48.259482] RPC: Registered named UNIX socket transport module.
    [ 48.259519] RPC: Registered udp transport module.
    [ 48.259552] RPC: Registered tcp transport module.
    [ 48.259595] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 48.264576] FS-Cache: Netfs 'nfs' registered for caching
    [ 48.270453] systemd-modules-load[1361]: Inserted module 'nfs'
    [ 48.275596] systemd-journald[1372]: Received SIGUSR1
    [ 48.653395] scsi_verify_blk_ioctl: 184 callbacks suppressed
    [ 48.653431] mdadm: sending ioctl 1261 to a partition!
    [ 48.653475] mdadm: sending ioctl 1261 to a partition!
    [ 48.653686] mdadm: sending ioctl 1261 to a partition!
    [ 48.653725] mdadm: sending ioctl 1261 to a partition!
    [ 94.390769] r8169 0000:02:00.0: eth0: link down
    [ 94.390805] r8169 0000:02:00.0: eth0: link down
    [ 94.391909] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 96.827209] r8169 0000:02:00.0: eth0: link up
    [ 96.828288] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 107.460005] eth0: no IPv6 routers present
    and /proc/cpuinfo:
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 21
    model : 16
    model name : AMD A6-5400K APU with Radeon(tm) HD Graphics
    stepping : 1
    cpu MHz : 3593.482
    cache size : 1024 KB
    physical id : 0
    siblings : 1
    core id : 0
    cpu cores : 1
    apicid : 16
    initial apicid : 0
    fpu : yes
    fpu_exception : yes
    cpuid level : 13
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rd

    itbane wrote:
    Sorry fore double-posting, but there's something new:
    At beginning, the PC continued booting after throwing this issue. But now, Booting sometimes just stops at the very moment when the CPU is not responding.
    ...sounds like a hardware problem to me given the sporadic nature.

  • Does anyone know when infinity blade 2 will be on any other app store except the US? south africa to be specific...

    does anyone know when infinity blade 2 will be on any other app store except the US? south africa to be specific...

    Apple Support Communities Use Agreement
    2. Submissions
    Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products.
    Discussions of Apple policies or procedures or speculation on Apple decisions.

  • ICloud synced the wrong file for Infinity Blade II saved game, lost a lot of progress.

    iCloud did not correctly sync a file between my iPhone 4s and my iPad.  The save file for Infinity Blade II was last updated on the iPhone. When I tried to load the game on iPad, it reverted to an earlier version. How do I restore the right file?

    Aside from the sync services such as contacts, mail, etc, the only way other data in the form of files are saved to iCloud are 1) a backup of app data to iCloud (this assumes backups are turned on as well as the app, see Settings>iCloud>storage and backups), and 2) individual apps that save their own data files, not as backups per se, but for syncing purposes.
    I'm assuming you have been discussing (2). you haven't mentioned doing a restore, and I wouldn't recommend that at this point. Version control if it were used would have to be the responsibility of the app.  iCloud does not implement that on its own and I'm sure Apple wouldn't want to provide that feature as users would quickly run out of iCloud storage.

  • MAC support- infinity blade 2

    I paid USD150 for in app purchases for Infinity blade 2, had the game for nearly a year, 'backed it up' as per the instructions, i stopped playing the game for a bit, and an update comes along, wipes my accounts, and because of icloud sync, it wipes it on my other devices as well, I try to back it up, it fails.
    I tried to restart a new game, as in app purchases would restore itself for new games- IT DOES NOT - it somehow does not recognize I bought the $150 worth of in app purchases.
    So I emailed MAC support- their replies were
    [quote]
    Thank you for the reply. I understand your frustration, but the product was delivered to you, but unfortunately it was not backed up. Since the data your purchased was stored in the save game file, the save game file must be present to maintain the content.
    To prevent future data loss, I recommend making frequent backups of your data. The following article has instructions for backing up your iTunes data:
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    We are able to provide refunds in cases where the product was never received, but these refunds must be processed a short time after the purchase was made. Since these purchases were made almost a year ago, we are not able to refund them. Additionally, we are not able to add credit directly to your account, as it must be purchased. [/quote]
    i want to clarify- the game is bugged, i did not get to enjoy my purchases and asked for support to simply give me my in game cash, and all they do is tell me the above... CHAIR refuses to reply my emails, they simply ignore me and when i press further, I get a reply from the support manager saying they WILL NOT be replying my requests anymore... CAN SOMEONE IN APPLE CARE DO ME SOME JUSTICE??? THIS IS OUTRAGEOUS...

    I play Inifinity Blade 2 on my 4th gen ipod touch, no issues with screen, don't think too much about it, you got another defective unit.

  • I have a problem with infinity blade 2

    I know that this is not the right place to ask this tayp of questions but I have to say the apple community is the best place where I can get help
    I have infinity blade 2 on my iPhone and I mastered almost all of the weapons so I can't get more experience so I can level up any ideas
    Thanks

    Why don't you search google for tips and hints?

  • Infinity blade III download error code 8008 when downloading

    When I'm downloading infinity blade 3 It said infinity blade 3 can't download at this time on ipad
    So I'm try again and say not enough storage it realy spend too much time for 3hours at 40%
    So I'm decide to download in computer and it stoppe at 20% say same as in the ipad and give me a error code 8008

    See if these help:
    Tunes for Windows: Possible Music Store Errors
    http://www.info.apple.com/kbnum/n93431
    "Well Known" TCP and UDP Ports Used By Apple Software Products
    http://www.info.apple.com/kbnum/n106439
    iTunes for Windows: Connection Issues when using Internet Filters, Accelerators , or Firewalls
    http://www.info.apple.com/kbnum/n93434
    Instructions on using MSCONFIG to troubleshoot conflicts in Windows
    http://www.info.apple.com/kbnum/n302538

  • I cant upgrade my new ipad to the ios6 dont knkow why and whats the problem and i was alo trying to   do the update simolteniously for infinity blade which i stoped in between as it crashed the ios upgrade   once hence tryed it again it went half way but

    i cant upgrade my new ipad to the ios6 dont knkow why and whats the problem and i was alo trying to
    do the update simolteniously for infinity blade which i stoped in between as it crashed the ios upgrade
    once hence tryed it again it went half way but it didnt work at all and i am trying to do it from the
    India..

    bnjr86 wrote:  There have been times when I've walked in there, that I really don't want to deal with VZW anymore and just take my business elsewhere.
    I  wonder if another provider would really be much different?  Read some of the other carrier forums - seems to be the same story everywhere.
    I'm not disagreeing with you - I've found that I am usually more informed about Verizon policies and procedures than some of the reps in our local store.

  • Space issues when updating Infinity Blade

    Hey all,
    I've got Infinity Blade, and it's a big app (891MB). When I go to update it, the Infinity Blade icon had a blue bar fill up until it gets to "Installing" then it says it can't do it, I don't have enough space. Now I've got 1.3 GB of space left on my iPad, so even if it was downloading a full new copy there should be enough space left. What's the deal here?
    Any input appreciated, Thanks,
    Dan Perkins

    That's a shame... I often run into the issue when I'm at work and (being impatient) I really want to update and app now. Unfortunately, I've got the 16gb and it's almost ALL apps taking up the space, as opposed to videos. So I can't delete apps and reinstall because I'll lose their data. And I have very little music. I do have a fair bit of family pics but I'd have to go through and delete a bunch 1 by 1.
    Maybe it is time that I start letting go of some of these apps that are cool but I'm REALLY not ever going to use them / play them again
    Thanks for the input.
    dp

  • Hi i have installed infinity blade 3 on my ipad mini today and when i try to launch it it quits how to fix this (sorry for bad english and thanks)

    Infinity blade 3 not working

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.
    If a reset didn't help, try the Infinity Blade 3 app deleloper website >  Official Infinity Blade Website

  • TS1702 Infinity Blade 1 on Iphone 4s

    I can't install Infinity Blade 1 with my iphone 4s. I was able to install IB 2 but not the 1st. Anyone can help? Thanks.

    worked fine for me. Did you get any errors at all when it tried installing? One thing to do is restore the iPhone in case anything has become corrupt, make sure you backup via iCloud and iTunes first though.

  • Strange audio in infinity blade 2?

    Hi guys
    Does anybody has a problem with audio in infinity blade 2?
    In detail,the game is playing only music, and not others effects, as walk steps, sword hit ecc ecc.
    Sometimes it's working, but just exit end re-enter with double tap on home button, and it doesn't work again.
    Any ideas??
    Marco

    I've already deleted and re-installed but it didn't worked.
    Is strange because seems the problem occurs only with this app.

  • TS1702 I bought an in app purchase while playing infinity blade app. My credit card has been charged but I can't see the in app purchase being reflected in my infinity blade app. What do I do? help!!!

    please help. How do I get this sorted out? I paid for an in app for infinity blade but the in app is not reflected.

    Click here.

Maybe you are looking for

  • Open ports for all in LAN

    Hi, a few days ago I bought a wireless router WRT160n. I want to ask how to open some port for all in LAN(3 clients). For example all in LAN have PeerToPeer application for torrents. I want to open port for example 20202 for all. Now I open port from

  • IE 8 not displaying images correctly

    I have recently started to  use Dreamweaver to format my pages for sitesell. I did an upload for  several pages and Internet Explorer 8 displays the main image below  where it should. When the image is clicked on, it moves to the correct  position. W

  • I am new to this Product

    How do I take the xml I have rec'ed with my form and import it into my adobe acrobat form I created?

  • Can I undo update to iOS 7?

    Am I able undo my updated to iOS 7?

  • Archive_lag_target

    Hi, My database is 9.2.0.7 running on HP_UX Itanium.... my redolog size is 100MB and for a day on overage there are 10 archive logs are getting generated. I want to make redo log switch frequently say for every 30 mins like that... I have been going