Infinity checker date has changed?

It was saying 1st of June but now it says 30th September?
SamKnows still says 1st of June?
http://www.samknows.com/broadband/exchange/SMBB
Ive heard the BT database isn't the best so who is right the BT check or SamKnows?

seab20 wrote:
I’d just go with the database being useless BT have all of their order system completely integrated with it though so even if your exchange is activated and your cabinet has been upgraded if the checker says no that’s the end of it
Yes the databases can be anoying. Your Exchange could have been enabled many months ago, what you need is the info on your cabinet. Is your cabinet going to be FTTC enabled and when .
Is your cabinet enabled, if not have you looked at the PCP-to-postcode-report its an excel file to tell you IF the cabinet will be enabled. Its a 47MB file
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Similar Messages

Changing Time Zones-Muse Thinks Assets' Data has Changed

I moved to Hawaii this week. Yay!
Changed the Time Zone in Apple's System Preferences. Opened a Muse project. Muse thinks the Assets' data has changed and wants to update all the linked files! I assume that it will then want to re-upload everything when published.
Changed the location back to my original place, and Muse thinks everything is fine.
Adobe InDesign does not have this problem. Neither does Illustrator. Those report links in their files are fine. So, maybe Muse should check System Preferences > Date and Time > Time Zone before saying that an asset has been modified.

This is a bug in iOS5 (don't think it happened in iOS4).
It's now Sunday am, and instead of Cupertino, my IOS5 iPhone now thinks I am in Denver. Apparently, Apple puts the iPhone not into an AZ timezone that doesn't change to DST, but the time zone the phone is currently "in synch" with - CA in the summer, CO in the Winter.
That is fine for current apponintments, and it also does explain while half my appointments in the weeks coming were wrong (off by an hour) until this morning. After all, I didn't stay in Phoenix and the time didn't change, I moved from California to Colorado to keep the same time, so some appointments shifted by an hour.
Let's hope Apple fixes this in time for us in Phoenix not to go back on DST - otherwise, appointments past the time change may or may not be right until all of Phoenix moves from Denver back to Cupertino again!

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

My billing date has changed, is it going to permanently be the 30th of the month?

My billing date has changed due to the new billing system. The letter I recieved shows August 30, but does that mean every month it will be the 30th?

Hi eric1742,
I apologize for the confusion. Yes this will be the permanent date. Your new payment due date will be at least 21 days after your statement date each month. If this is a different due date than you had previously, and you pay your monthly bill automatically via our automatic bill payment service, then your payment will be withdrawn from your bank account on the new date as per usual. If you pay your bill automatically via your bank, you will need to inform the bank of your new payment due date. Also, your new account number will be on your August 2015 bill. If you use electronic banking to pay your Comcast bill, please remember to update your banking information for your new Comcast account number to avoid a delay in the posting of your payment. If you have further questions or concerns please let me know.

How can I tell if any table data has changed?

HI
I'm in the process of reverse engineering an application. We don't have the source code, so I've been looking to the Oracle 8 database to give me some clues as to what insert, update, delete operations are being performed.
Is there any SQL I could run which would indicate the table data has been changed in some way.
Thanks
Glenn

What's the application architecture? Is this a client/server application? Or a three-tier application? Is there a lot of PL/SQL? Or is all the SQL getting generated in the application and sent to the database? Depending on the architecture, a SQL*Net trace on the client may be appropriate-- that will log the SQL the client app is sending to the server. If you have a three-tier app, though, it may be hard to relate the SQL to a particular operation or to relate the SQL statements to each other. If you have a lot of stored procedures, you'd only see the procedure call, not the SQL the procedure executes.
You could trace a particular database session, which has similar issues in a three-tier environment or if MTS (the precursor to shared server) is in use, but does capture SQL issued by stored procedures. That may put a degree of load on the database server as well.
You could also query the data dictionary (i.e. V$SQL) periodically to see the SQL statements in the shared pool. You have to ensure that you're polling frequently enough to catch SQL statements before they age out of the shared pool and you won't generally be able to relate one statement to another or to a particular application function. But you could see all the SQL the database is executing.
Justin

I have updated my webpage - its updated on my remote server "using dreamweaver" and the date has changed, but when i go online to check nothing has changed.

all is connected, dates changed in the remote server, i have cleared my history so that its not just going to its memory but actually looking for the page.
does anyone have any ideas?

I just tried to run your home page through the W3C validator and got this error:
Sorry! This document cannot be checked.
I got the following unexpected response when trying to retrieve <http://www.dsfiresecurity.com.au/>: 500 Can't connect to www.dsfiresecurity.com.au:80 (timeout)
If you made recent changes to your domain name (DNS) configuration, you may also want to check that your domain records are correct, or ask your hosting company to do so.
Nancy O.

Data has changed after passing through FIFO?

Dear experts,
I am currently working on a digital triangular shaping using the 7966R FPGA + 5734 AI. I am using LabView 2012 SP1.
Some days ago I have encountered a problem with my FIFOs that I have not been able to solve since. I'd be glad if somebody could point out a solution/ my error.
Short description:
I am writing U16 variables between ~32700-32800 to a U16 configured FIFO. The FIFO output does not coincide with the data I have been writing to the FIFO but is rather bit-shifted or something is added. This problem does not occure if I execute the VI on the dev. PC with simulated input.
What I have done so far:
I am reading all 4 channels of the 5734 inside a SCTL. The data is stored in 4 feedback nodes I am applying a triangular shaping to channel 0 and 1 by using 4 FIFOs that have been prefilled with a predefined number of zeros to serve as buffers. So it's something like (FB = Feedback node):
A I/O 1 --> FB --> FIFO 1 --> FB --> FIFO 2 --> FB --> Do something
A I/O 2 --> FB --> FIFO 3 --> FB --> FIFO 4 --> FB --> Do something
This code shows NO weird behaviour and works as expected.
The Problem:
To reduce the amount of FIFOs needed I then decided to interleave the data and to use only 2 FIFOs instead of 4. You can see the code in the attachment. As you can see I have not really changed anything to the code structure in general.
The input to the FIFO is a U16. All FIFOs are configured to store U16 data.
The data that I am writing to the FIFO can be seen in channel 0 of the output attachment.
The output after passing through the two FIFOs can be seen in channel 2 of the same picture.
The output after passing through the first FIFO (times 2) can be seen in channel 3 of the picture.
It looks like the output is bit-shifted and truncated as it enters Buffer 1. Yet the difference between the input and output is not exactly a factor of 2. I also considered the possibility that the FIFO adds both write operations (CH0 + CH1) but that also does not account for the value of the output.
The FIFOs are all operating normally, i.e. none throws a timeout. I also tried several different orders of reading/writing to the FIFOs and different ways of ensuring this order (i.e. case strucutres, flat and stacked sequence). The FIFOs are also large enough to store the amount of data buffered no matter if I write or read first.
Thank you very much,
Bjorn
Attachments:
FPGA-code.png ‏61 KB
FPGA-output.png ‏45 KB

During the last couple of days I tried the following:
1. Running the FPGA code on the development PC with simulated I/O. The behavior was normal, i.e. like I've intended the code to perform.
2. I tested the code on the development PC with the square and sine wave generation VI as 'simulated' I/O. The code performed normal.
3. I replaced the FIFOs with queues and ran my logic on the dev. PC. The logic performed totally normal.
4. Right now the code is compiling with constants as inputs like you suggested...
I am currently trying to get LabView 2013 on the development machine. It seems like my last real hope is that the issue is a bug in the XILINX 13.4 compiler tools and that the 14.4 tools will just make it disappear...
Nevertheless I am still open for suggestions. Some additional info about my FIFOs of concerne:
Buffer 1 and 2:
- Type: Target Scoped
- Elements Requested: 1023
- Implementation: Block Memory
- Control Logic: Target Optimal
- Data Type: U16
- Arbitrate for Read: Never Arbitrate
- No. Elements Per Read: 1
- Arbitrate for Write: Never Arbitrate
- No. Elements Per Write: 1
The inputs from the NI 5734 are U16 so I am wirering the right data type to the FIFOs. I also don't have any coercion dots within my FPGA VI. And so far it has only occured after the VI has been compiled onto the FPGA. Could some of the FIFOs/block memory be corrupted because we have written stuff onto the FPGA too often?

Pages long date has changed

I invoke Command Shift 5 ALL the time to input the long date and time. Before the update either to Pages or Lion I would get this format:
Sunday, July 24, 11 2011:20:42 PM
Now I get this:
Sunday, July 24, 11 11:20:53 PM
Notice it's missing the 20 before the 11 in the year date field.
What happened?
Lion 10.7
Processor 3.4 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 2048 MB

No. But then I am on a PC running XP
I'll check it as soon as I can on a Mac running Lion, when I get to an Apple Store.
Peter

Updated app metadata, now release date has changed to Aug. 12 :(

This morning I updated the metadata of the paid version of my app (which was on the front page of the utilities category as an update just appeared a couple of days ago). Now I see that its release date is marked as Aug. 12 (the original release date) and as a result the app is pushed way to the back of the utilities category apps listing. Anyone had this happen to them and can suggest anything to do about it?

Just searched the forum and found a couple of threads on this topic, so as a service to the community, here they are:
http://discussions.apple.com/thread.jspa?messageID=8140542#8140542
http://discussions.apple.com/thread.jspa?messageID=7917099&#7917099

Delivery date keeps changing..!

I bought an iMac 21.5 inch on October 16, 2014 via phone. I made the full payment with my credit card. Received an confirmation e-mail stating that the delivery date is November 3rd, 2014. The next day I received another e-mail saying that the delivery date has changed to 22nd of October, 2014. Since than I've been waiting for the iMac, but have not received it yet! I made numerous phone calls to Apple Store, Turkey. Guess what they couldn't figure out why my shipment date changed and whereabouts of my iMac! Finally I received another mail on 29 October, saying that the iMac is on the way and it will be on my hand on November 12th! Still waiting..! And the world largest, biggest and probably the richest company personell can not give me a reasonable answer to my problem! By the way they confirmed that they have it in their stocks of the day of my purchase...!

You're right. This is a technical site and I shouldn't have posted that message but I had to write about this to someone.. So please excuse my posting. By the way just to let you know I admitted that they have no reasonable answer and apologised. They even told me that they are ready to make an extra 5% discount or I could make a purchase from the online store equivalent to 5% of the total price of iMac!

Partitioning: Easiest way to determine whether partition has changed

Hi all
10gR2 / 11g
Looking for an easy way to determine whether a (read-write) partition holding old data has changed, particularly whether new records have been added (for instance has a new record been added to partition '2005'? - looking for "TRUE" or "FALSE" status on this question). Don't want to set partitions holding old data read-only, it's ok to add 'old' data, just want to know about it.
DB-Trigger would be a way, but that slows down the application somewhat. Taking snapshots of Partition-Views and comparing them?
Any magical idea?
Thanks
Tino

Magic is not required. What you need to do is set the tablespaces of old partitions to READ ONLY and then forget them.
If you make a tablespace READ WRITE then the only way to track changes is if you write code to do so: In advance.

How to verify that the user has changed table row data before db update

Hi all,
Iam using Oracle ADF with EJBs.
I have a single selection table that displays rows of data returned from a function of my data control.
The columns of my table are editable so that the user can change the data. The user selects a row, changes the data in one or more columns of the row and saves the data by means of a submit button. The code in the submit button, identifies the row of the corresponding iterator that the user clicked on and updates the data in the database (using the 'mergeEntity' function of the EntityManager)
Before saving the data, I want to put some logic to check whether the user has actually changed some data to avoid unnecessary updates in the database . But for this I need a technique to detect that the user has indeed changed some data in the table row.
One technique I have been using so far was to isolate the iterator row of the table and then query the corresponding row in the database table and compare their values.
Except from dummy, this technique is not efficient if the table contains many rows.
Moreover, in my case I have observed that on successive updates on the same row , the query on the database returns the new values (user changed values) and not the actual values contained in the database table. This means that when the user updates an iterator row the cached data affect also the results of the SELECT statement from the actual database table!!! Isn't this strange ?
Can somebody propose me a neat method to detect when the user has changed the the data of an iterator row ?

Hey Alan,
The below solution seems overly complicated to me and can not be implemented without a custom screen and/or the use of JavaScript. Also, if your main concern is that a user may accidentally loose all their data because they closed the browser window or the session times out before they hit the save button then this solution does not help you.
There are a couple of simpler approaches you can take here:
# If the use of JavaScript is permissible you can hook into the windows 'onUnload' event, and pop-up a message box which gives the user the opportunity to cancel closing the window and save their case if they haven't already.
# Implement an autosave feature by hooking into one of events provided by web determinations. A simple (but rather naive) way of doing this would be to hook into the OnRenderScreenEvent and call save on the interview session every time the event fires. This guarantees that all the data the user has submitted will aways automatically be saved, thereby removing the need to make sure the user manually saves their data before closing the browser.
Automatically making Web Determinations close a browser window has to be done using JavaScript. However, doing so means that a) it won't work for people who turn off JavaScript, which is commonly done for accessibility reasons b) you'll likely run afoul of the browser's security mechanism (they generally won't let you close a window that you didn't open and some really don't like you doing that at all).
Thanks,
Kristy

ORA-20505: Error in DML - Version of data in db has changed

Hello,
Application Express 3.1.0.00.32
I have created a Report and Master Detail in the Sample Application on oracle.application.com. I am receiving an error on my Master Detail Form when clicking the <Previous and Next> buttons. I have viewed other issues like this in the forum but, it looks like everyone is a little different. Can anyone assist me with this error when browsing to the next record(s). Thanks in advance.
ORA-20505: Error in DML: p_rowid=6, p_alt_rowid=CUSTOMER_ID, p_rowid2=, p_alt_rowid2=. ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "E9A08EDC02A82871E6865DB254B09ED2" application checksum = "39454529513F24BE60C167752BF71750"
I created another Master Detail page and I do not have any errors when scrolling using <> buttons. Here is a process that may be causing my error using the original Master Detail page.
DECLARE
CUSTOMER_ID VARCHAR(20);
BEGIN
SELECT CUSTOMER_ID INTO :P21_CUSTOMER_ID
FROM DEMO_CUSTOMERS
WHERE CUST_FIRST_NAME = :P21_CUST_FIRST_NAME;
-- processing here
EXCEPTION
-- Catches all 'no data found' errors
   WHEN NO_DATA_FOUND THEN
     DBMS_OUTPUT.PUT_LINE
       ('No Data found for SEARCH on ' || CUSTOMER_ID);
END;Edited by: Charles A on Apr 30, 2009 11:40 AM

Hi Charles,
I've had a look at your page 21.
The problem was that the "Fetch Values 2" process was not conditional and was running in the "On Load - Before Header" process point. This meant that it was being run every time the page was being loaded. This process checks for the CUSTOMER_ID relating to the value in P21_CUST_FIRST_NAME which, because the "Fetch Row..." process hasn't been run at that point (it runs "On Load - After Header"), will always return the same CUSTOMER_ID value from when the page was first loaded. The Next/Previous buttons, however, moved the P21_CUSTOMER_ID forward/back one value (this became apparent when this field was changed from "Hidden and Protected" to "Text"). As a result, the data on the page was for "Albert" but the CUSTOMER_ID value was for whatever record was next/previous to the Albert one. Thus, moving next/previous always caused a mix of the actual data.
I have changed the "Fetch Values 2" process to be conditional on P21_CUSTOMER_ID being NULL. This way, the CUSTOMER_ID value is ONLY found by code when the page is first loaded. Thereafter, it is controlled by the Next/Previous functionality.
Andy

APEX Error: Current version of data in database has changed since user init

Hi:
APEX 4.1
I have a page with 2 regions. The first region is built with custom SQL using the APEX APIs. I have a process the can successfully update records.
I built the second region with the tabular form wizard. This created the multi row update process.
I created a region button and the two process respond to that button: process for first region, then process for the second region.
When I add data to the second region and click the region button, I get the following error:
Current version of data in database has changed since user initiated update process. current row version identifier = "A884FA378C851786DDFE3A33709CB23C" application row version identifier = "9ED06A0F09F80F054AB781CA24CC4CBF"
I know it has something to do with these two types of regions being on the same page, because when I create a page of just the table form, the data is updated.
Can anyone suggest what I might be doing wrong?
Thanks.

Hello
If you try update the same data from 2 places you will got this message because:
Apex forms have locking mechanism.
1. During fetch data to form apex calculate checksum from every items on the forms.
2. Before update process apex again fetch data from database (in background) and calculate checksum again if checksum from point 1 is the same like this checksum APEX realy update data with new item values. If no, You will got your error (apex secure You, You realy don't know what you update).
According this if you change data which you use in the form between 1 and 2 point you will got this "error". You can check it for example if you change data from SQL/Plus or from other form.
Probably you forget about this locking mechanism during designe your process from APEX API <- successfully update records (maybe successful but you don't know what you updated) : )
If I helped You please check correct or helpful :)

MRU Error : Current version of data in database has changed since user init

When i use HTMLDB Wizard to create Master Detail Form
(You can see step by step what i doing by see this url :
http://jroller.com/resources/w/wildan83/MRU%20Error.pdf
The is error in MRU :
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "A884FA378C851786DDFE3A33709CB23C", item checksum = "0EEFFABE8252B0B279DB14A77F567F5D"., update "CNAP2"."ENROLLMENT" set "STUDENT_ID" = :b1, "SECTION_ID" = :b2, "ENROLL_DATE" = :b3, "FINAL_GRADE" = :b4.
If there something missing.., just say ..
Thanks for the help.

Oh i see ..,i never think if that is the source of the MRU
error.
Ok ..,
Now ..., i have new question .., how can i change so the the primay key in detail table (enrollment table), i have one primary key with two columns .., if you don't understand what i mean ..,
check this alter table statement :
ALTER TABLE ENROLLMENT
ADD CONSTRAINT ENR_PK PRIMARY KEY
(STUDENT_ID
,SECTION_ID) ;
Now the question is .., when i using wizard to create master detail form .., html db automatically make student_id and section_id as the primary at "application level (html db)" .., how can i change this behaviour ..,
i want the html db not treat this two column as primary key ?
Do i have to create master detail form manually to accomplish this ?
Thanks before .., sorry if my english is not too good.

Infinity checker date has changed?

Similar Messages

Maybe you are looking for