Infinity not available yet cabinet and neighbours ...

Hello,
I would love to have Fibre - however the online checkers tell me that it is not available in my area. However I have received flyers from Openreach telling me that FTTP is available at my address and my neighbours are currently using Fibre.
According to this checker (http://www.dslchecker.bt.com/adsl/ADSLChecker.address) my address comes up with the following:
Address ---- on Exchange TRURO is served by Cabinet 64
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
WBC ADSL 2+
Up to 5.5
3 to 8
Available
WBC ADSL 2+ Annex M
Up to 5.5
Up to 1
3 to 8
Available
ADSL Max
Up to 4
3 to 7
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Copper Multicast
Available
Yet if I type in a neighbours address either side of me, I see this:
Address ---- on Exchange TRURO is served by Cabinet 64
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
WBC FTTP
Up to 330
Up to 30
Available
WBC ADSL 2+
Up to 5.5
3 to 8
Available
WBC ADSL 2+ Annex M
Up to 5.5
Up to 1
3 to 8
Available
ADSL Max
Up to 4
3 to 7
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Fibre Multicast
Available
Copper Multicast
Available
We are both served by the same cabinet yet I cannot gain fibre - why could this be? (We are not in a flat).
I've contacted BT and our current provider TalkTalk - but I just get passed around or they run the same check and tell me it's not available in my area. The advice seems to be to wait indefinetely - however it feels like there could be an error somewhere - how can I figure out what's going on - other than moving?
Any help appericated! I'm more than happy to move to any provider that can help!
Thanks,
Andrew Murray

Your current copper DP may not have had the facility to have fibre. This would envolve getting a blown fibre tubing attached adjacent to the copper DP.
Reasons for this could be that there was no ductwork available as the existing copper cable could be direct in the ground.
There could also be other issues that your copper DP is attached to a electricity pole and it is not possible to feed fibre from these.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

  • I want to buy an i pad with wifi and 4G in Hong Kong but 4G not available yet. Why is this?

    Do you need 4G in Hong Kong and how come its not available yet. Will it work with the mobile services available here? Does anyone have any info on this?

    This 4G business (Like anything else), is being hyped like crazy. In the UK we do not have proper 4G yet , however the new iPad works just fine on 3G. Think of it this way the faster you download data the quicker yo'll get through your quota of data. Even if 4G was available now I could bet bet you the tariffs wouldn't change much, making it very expensive. Personally as yet, I couldnt give a monkies about 4G as we have so many free Wifi spot here.. And I know you do in Hong Kong too as I was living out there last year!
    Hong Kong tip: try the burger bars, coffee shops and shopping malls for free wifi. In addition HK telecoms companies usually offer free wifi for at least 60 days before you are committed to a contract (something I've not seen in UK)!

  • Some Apps are not available yet.

    Majority of the important apps are not available yet for Q5.  Any updates on when this will be available. Like Viber and WeChat. WeChat is already available and it says that it's compatible with OS 10 but why is it unavailable for the Q5 in specific? Isn't Q5 running on OS10 too!?

    Hi and Welcome to the Community!
    App compatibility is the same as it has always been for BBs. All apps must be specifically ported to the exact device model number AND major OS level in order to function. That means a lot of porting for the developers, and sometimes they choose to not do so. An app that functions on Z10, for example, will not function on the Q5 unless the developer specifically ports the app for the Q5 (and pushes it correctly out via BBWorld).
    Likewise, it's up to those app developers to choose what platforms they desire to support. If they do not support a platform that you desire, your channel to push for it is with the developer directly, contact information for which can normally be obtained in the BBWorld catalog.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • GPS not available only WLAN and Basestations

    Hello,
    in my iPhone 4s GPS is not available, only WLAN and Basestations are used to show location on Maps. On my iPhone 4 everything works fine. Both on iOS 6.0.1
    Device already reseted.
    What else do I have to do.
    Best regards
    Reiner

    I've had limited success using G spot (App from the Apple store) which seems to find my location by using my WIFI which is also registered with Skyhook and then using it to launch maps. Even though G spot works, google maps still doesn't locate me, but luckily G spot will place a pin drop on your location within maps at the touch of a button.
    Thus this may be a workaround for now. G spot also seems seems to work with my wifi off, but I don't know if it's just using a cache of my last known location. I haven't tested in places aside from my flat yet, but will do so very shortly and I will report back whether using a third party app, such as G spot works at obtaining your location which can then be feed into google maps.
    Gspot is not free (though it's not expensive). Luckily I had it due to the compass it provides. However one can test whether 3rd party apps work for you or not in obtaining your location for free by downloading either of the 'here i am' apps from iTunes and having it email your location to yourself and then opening the link from the email, which launches maps and pin drops your location. Though this will not provide live GPS on the 3G, but it will atleast give you a general location and a map if you're lost until Apple sorts out their ****!

  • Cannot get timers because the EJBTimerManager is not available yet.

    WLS 12.1.3 installation on Win Server 2012.
    One cluster of two managed servers.
    A web application has a ServletContextListener, used to create some EJB timers as soon as it gets deployed. The timers are clustered (their state is persisted in an Oracle DB).
    When I restart the managed servers, I get the following exception:
    2015-03-17 16:39:20,396 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR - [clusterServer_1] java.lang.IllegalStateException: Cannot get timers because the EJBTimerManager is not available yet.
         at weblogic.ejb.container.timer.ClusteredEJBTimerManager.getTimers(ClusteredEJBTimerManager.java:114)
         at weblogic.ejb.container.timer.ClusteredEJBTimerManager.getTimers(ClusteredEJBTimerManager.java:109)
         at weblogic.ejb.container.internal.TimerServiceImpl.getTimers(TimerServiceImpl.java:187)
    If I undeploy and redeploy the web application without restarting the server, the exception is not raised and the timers are created.
    I tried to assign the web application a higher distribution order, to let it start after all the others have been started, but no way.
    Any suggestion ?
    Thanks

    Some viruses cause this behaviour.
    usually they change registry path to userinit.exe, winlogon.exe  and logonui.exe and change these filies.
    Seems like you'll have to clean this by antivirus tools.
    For now try booting in safe mode and entering Administrator account with blank password.
    Also try pressing twice Ctrl+Alt+Del on logon screen and use logon name Administrator and blank password.
    //help will save the world

  • Tried to paste a resume and i get this as a answer (copy/cut/paste is not available in mozilla and firefox ?

    i have a mac pro and i copied a pdf form resume to a site
    called local work.ca and tried to paste it and this
    is what showed up as a answer (copy/cut/paste is not available
    in mozilla and firefox
    i have firfox 6.0.1 can you help me please

    *http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
    *https://addons.mozilla.org/firefox/addon/allowclipboard-helper/ - AllowClipboard Helper

  • Suddenly I cant copy and paste copy/cut/paste is not available in Mozillia and firefox. Never seen this before

    I have never seen this before when I try to copy and paste, I get a
    "Copy/cut/ paste is not available in Mozilla and firefox. Do you want more information about this issue? "
    I have copied and pasted hundreds of times before with Mozilla and firefox . This just happened suddenly.
    when I go to find more information on this issue, it give a long drawn out explanation I cant follow.
    What happened?

    When you right-click the link, the page immediately tells you you can't copy, or does that occur after you choose Copy Link Location?
    If it appears immediately, you can switch a setting in Firefox that should prevent sites from blocking the normal right-click menu. Here's how you would do that:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''context''' and pause while the list is filtered
    (3) Double-click the '''dom.event.contextmenu.enabled''' preference to switch it from true to false.
    This setting does have a complication: On Google Maps and other sites that have their own right-click menu, Firefox's menu then will block the site's menu. To clear Firefox's menu so you can access the site's menu tap either the Alt key or Esc key once (but sometimes Esc removes both).

  • Firefix sad:"Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?" But,I can do the that from Opera...What should I do?

    Copy/Cut/Paste is not available in Mozilla and Firefox.
    Do you want more information about this issue?
    That's what Firefox sad to me...I was Rich text editing,but I can
    not use copy paste on.
    I did the same site and Rich text editing with Opera,
    and there was no problem.
    I love Firefox,and I want ti use it,but if this is not posibile to do in Firefox,I must go with Opera from now on.
    Pleace,responde to me,I need to fix a problem.
    I hope you understanded my Engish!
    Thank you...

    Try to use the keyboard if the buttons on the web page aren't working.
    * Copy: Ctrl+C or Ctrl+Insert
    * Paste: Ctrl+V or Shift+Insert
    * Cut: Ctrl+X or Shift+Delete
    See:
    *http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
    *https://addons.mozilla.org/firefox/addon/allowclipboard-helper/

  • Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?

    Copy/Cut/Paste is not available in Mozilla and Firefox.
    Do you want more information about this issue?
    Yes!

    https://support.mozilla.com/en-US/kb/Clipboard+not+working
    This extension will help you set the necessary permissions - Allow Clipboard Helper extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/852

  • Why ebooks on ibooks is not available yet in philippines

    why ebooks on ibooks is not available yet in philippines

    Apple can sell things where the content providers have given them licenses to sell them - so if the book publishers haven't given them licenses to sell their ibooks in the Philippines then Apple can't sell them there.
    Until if/when the book publishers grant Apple licenses, do you have access to other ebook apps/stores that you can use instead ?

  • Why is 4.0b11pre not available in win64 and when will the regular betas get win64 version

    Why is 4.0b11pre not available in win64 and when will the regular betas get win64 version

    Mozilla will not be releasing a 64 bit Windows version of Firefox 4. They are creating 64 bit builds for testing purposes, but there will not be an official 64 bit Windows version until some time after Firefox 4 is released.

  • Hi when i select tab on itunes it comes up 'selection not available in uk' and if i try to sign in it comes up 'check network connection'... any idea's.. cheers

    Hi when i select tab on itunes it comes up 'selection not available in uk' and if i try to sign in it comes up 'check network connection'... any idea's.. cheers

    Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues

  • In Pages 5.2, some fonts "not available", yet present in Font Book and working in other apps

    Using Pages 5.2, I open a document created in a previous version, and I get error messages about certain fonts within a font family being "not available" in OS X.  However, these supposedly unavailable fonts are present in Font Book and work just fine in all other apps running on OS X.  In fact, I still have the older version of Pages on my system, and it still finds the fonts without issue.  The specific fonts troubling me at the moment are Myriad Pro Semibold It and Myriad Pro Cond.  Pages 5.2 replaces them with Helvetica.  I have wasted hours of time trying to resolve this problem, and I am at a total loss.  What can I do?

    Like so many other thing is is probably gone. Why not use Pages 09 that has about 100 features more than Pages 5. If you haven't deleted it it should still be in Applications/iWork 09 folder.

  • Is there a central note available yet for Upgrading to NW 7 EHP 5?

    Hi all,
    I'm trying to find out if there is a central note available for upgrading to NW 7 EHP5.
    I have note 1299009 which is the central note for upgrading to NW 7 EHP 2 but I'm trying to find one for EHP 5 specifically (if it exists at all).
    The reason I'm keen to find this is because note 1299009 refers to downloading various software patches and fixes before starting your upgrade and it tells you the versons of the files you need, but it is specific to EHP2 and its not at all obvious which files to use if you are going to EHP 5 (or does it even matter?).
    For example, you need to download the latest patch for SAPup. The oss note mentione for EHP 2 to use the 7.02 version.  Logically it would follow that there might be a 7.05 one for EHP5? No there isn't, you just get 7.00, 7.01, 7.02, 7.10, 7.11 and 7.30 - how do you know which to use for EHP 5? (or is it just 7.02 still?).  The current version of SAPup that comes on the DVD is 7.00/3.  Hopefully you can see why I am confused.
    The same is true for the correction needed for the upgrade package. The suggested one in the note refers to FIX_ NW02.UPG. On OSS the availble ones are the same as above (nothing with a 5!).
    Any help appreciated.
    Regards
    Claire
    Edited by: Claire  Richards on Dec 15, 2011 12:23 PM

    Dear Claire,
    Let me clarify your doubts here.
    There is no EHP5 for NW 7.0 yet. Its EHP5 for ECC 6.0 which brings in NW 7.00 EHP2 along. 
    ECC 6.0 uses NW 7.0 architecture and also note that NetWeaver 7.0 is also available as a independent product.
    Now if you are having NW 7.0 as your product version then you need to apply EHP2 of NW on it to be on 702 release.
    But if you are having ECC 6.0 as your product version then you need to apply EHP5 of ECC on it to be on 702 release which would also make 605 release for all other application components.
    For ECC 6.0 EHP5 kindly refer the following SAP Notes:
    1302772 - Central Note - SAP Enhancement Package Installer 7.00
    1298878 - Installation of SAP Enhancement Package 5 on SAP ERP 6.0
    I hope i could clarify your doubts.
    Regards,
    Abhishek

  • Two-step verification is not available in "Passwords and Security" as it should be

    In order to activate two-step verification for my apple account I was told to log in at appleid.apple.com, go to "Passwords and Security" and locate "Two step verification".
    It is not there. I answer the security questions, I can change my password, set a rescue email, change my security questions, but no "two-step verification".
    I live in Romania, does that have anything to do with it? Are my people not worthy of extra security yet?

    2-step verification is not available in Romania as yet. There isn't any information about roll-out to countries in which it's not yet available.

Maybe you are looking for

  • Items not showing up in Trash

    When I drag files to the Trash, a box pops up saying Finder wants to make changes. Enter password to allow those changes. When I enter my password, the file goes away, but when I open the Trash there's not any files in there? I'd like to be able to o

  • I can't synchronised even when I am connected with my USB cable

    I don't know what happened, I don't see my Ipad and Ipod on Itunes. I have connected with my PC and nothing. I uninstalled and reinstalled Itunes and still nothing. I am using a VPN address but I didn't activated to be sure that I can synchronised. I

  • Release strategy - item level

    hii all can some body tel me , how and where we have to configuration for PR release strategy at item overview level. And the same item level release strategy is posssible to configure for PO also?? If not y what is reason??? Thanks in advance SAP-MM

  • NoClassDefFoundError: sun/security/x509/CertificateSerialNumber

    Hi! I have the following installed - JDK5, Tomcat for JWSDP and JWSDP. Now as per the docs for "Integrating the Java WSDP Component Technologies with the Tomcat 5.0 for Java WSDP Container" I execute the bat file "jwsdpontomcat.bat <tomcat5 installat

  • MultiLanguage Support  (JSP)

    Hi, Can anybody tell me about how we can implement Multilanguage Support for a website using JSP.There is a Java.Util class called resource bundle which is used so if anybody knows about it and can also give me an insight to it. I'll be greatfull.