Infinity rollout stopped at the end of my street ?...

Hi all,
This is my first post so here goes. Like most people I've been waiting for Infinity for a while now. I already know my exchange has been updated MYLOF, and that my street cabinet (CAB 15) hasnt been. My issue is that the rollout has completely passed by my estate. I've enclosed a map, my estate is boxed in red. All other areas on the map are eligible for Infinity.
I've tried to have a conversation with BT, but that was too painful to describe and resulted in a simple "it's not available in your area". We've even had the entire estate mail shot by BT to signup for Infinity. My estate is a new build, although I've lived on it for over 2 yrs so now that new.
Have we been simply skipped over?? Can anyone offer any suggestions or help?

hi this may explain a little more
Within an exchange area there will be some customers who can't get BT Infinity. There are several reasons why this could be the case:
Your phone line may be connected directly to the telephone exchange and not to a local street cabinet.
Your line may be too far from the local street cabinet to have a stable BT Infinity service.
Your local street cabinet may not be suitable for fibre optic cables.
We haven't yet got the council's planning permission to do the necessary work at your local street cabinet.
So, even though you may be within an enabled exchange area, it's possible that your particular line may not be able to have BT Infinity yet. at activation of an exchange not all street cabs are enabled at that stage there is a phased roll out of street cabinets
Our availability checker at www.bt.com/infinity has the latest detail about what speed your line can provide.
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

Can "cycle" be set to stop at the end, and/or go to the start and stop there?

Maybe I'm looking in the wrong place for this feature. I'm used to a daw that provides a method to identify a region (similar to Cycle Mode), but gives the options to do one of several things, rather than only loop that passage endlessly. Sometimes I want playback to stop at the end of the passage...and when I hit return, it will go to the beginning of the passage and stop there. Or..sometimes I want the playhead to go to the beginning of the passage and stop there, instead of continuously loop. I rarely want an endless loop of the section.
Sometimes I don't want a region at all, I simply want to set a memory location and have the playhead go there any time I hit return, instead of go to the beginning of the sequence, or to the beginning of a cycle to start looping.
thanks

Yeah...I've worked out an alternative, but it would be very nice if there was a feature like what I'm talking about. Basically, a start and end memory location that is multi configurable to whatever you want. It can loop, or just go back to the start location and stop. And every press of rewind takes you to the start.
I've come up with the key command, go to left locator or right locator, and don't enable cycle mode.

I tried to install Icloud on my windows 8 touch PC and it stops at the end and say there is an error.. any Ideas?

I tried to install icloud on my windows 8 touch PC and it stops at the end and says Error? Any Ideas what is wrong?

This is all I could find: http://support.microsoft.com/kb/2643995

Since installing latest iTunes my playlists stop at the end of each song -why?

since installing latest iTunes my playlists stop at the end of each song -why?

Richard Emerson1 wrote:
since installing latest iTunes my playlists stop at the end of each song -why?
Most likely your songs got unchecked. iTunes will not automatically advance to an unchecked song.
First make sure you can see the checkboxes. If not, Preferences > General, Show list checkboxes.
If they have gone empty, you can recheck them all at once by holding the CMD or OPTION key (sorry I forget which on a Mac, so if one does not work try the other) and click any empty box.

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. Someone can fix this?

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?

Hi Tom
Thanks for replying!
I had heard that these switches didn't stack unless everything was identical.
I only tried it at all out of pure desperation.
I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
They either never come up properly receiving decompression errors and reboot constantly in a loop.
Occasionally they stall / jam and stay there displaying the same error with no rebooting.
And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
But as soon as I made a change it crashed and started the rebooting cycle again.

Making a DVD that stops at the end

I want to make a straight DVD that stops at the end. Is it possible to do this without using DVDSP? I have exported the files using compressor and burn them in Roxio's Toast, but they will just keep looping. I am on the verge of having to get Final Cut Studio upgrade if there is no other way to do this.
Just to recap. I want to put one movie on one DVD without menus. I want it to play once and then the DVD to stop.
Thanks for any help
PS didn't know where else to put this post.

Thanks for all replies. There are options I see.
In response to last post, I agree that setting jump at end to stop might not always work in 1.5. The full story is that most of my test discs seem to play as I wanted them in Apple's DVD player but not once imported into Toast and saved as disc image. I tried the burning disc in Finder option and this was the only way that seemed to produce the stop at end effect I required. Yet my discs were freezing and crashing in both my 3rd party DVD players and I thought this was down to me burning it using the Finder.
I've since found out that it may be that the bitrate was too high when I encoded the video that was the reason for the crashing. It's the first time I've tried to do this seriously so I'm having to learn. It can be a bit confusing.
Thanks again for help.

Can iTunes be set to stop at the end of a track and wait for a manual play.

I am wanting to use itunes to play sound effects in a live drama but I need to have it stop at the end of each track and wait for a manual start. It needs to be done without deselecting and selecting tracks by myself and, importantly, others who may be confused by the computer.
If iTunes can't do this is there any other app that can, I've been looking but failed to find any apart from DJ packages which are more complicated than I would like for others to use.
Dave

You want to have a bunch of tracks, play them in order, the first one plays then it stops and all you have to do is hit Play to continue to next track?
This script will do it.
Play the first track and iTunes will stop at the end and queue up the next song. Just press Play (or Spacebar) and it'll play the second song and stop till the end of the playlist.
No need to select any songs or do anything fancy.
-> Stop Track!
"This script applet runs in the background while an iTunes playlist is playing. Whenever the accompanying "STOP_TRACK_05sec.mp3" track is encountered, the script will stop iTunes and advance to the next track, which you can start manually."

A movie I ment to download stopped near the end of the download I want to know what I can do

A movie I ment to download stopped towards the end of the download

Hi, jannaken.
Since the computer was restored to factory, your sync preferences have been reset. I would recommend verifying that Sync Music is selected under the device preference. Below, this article will walk you through the process.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Cheers,
Jason H.

Playhead will not stop at the end

When I play my project in FCP the playhead will not stop at the end but will continue for a few seconds. So when I want to share my project I have to make a range so that I don't have a black clip at the end. There's no gap or what so ever on the timeline. How can I solve this? Thanks for your answers.

Unfortunately, the problem is not solved. When I hit the end key the playhead goes to the end. Actually one frame further. Because when I go back one frame, I get the end clip symbol in the corner. But if I just play, the palyhead goes further for a 3 seconds. Then I get the clip symbol "negative edge" on the rightside. See also image. And there is nothing in the timeline.

Using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part I get no indication on ipod of download

When using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part. I get no indication on the ipod of the book downloading. Is this a operating error or posable failure of the I pod.?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT1222 10.6.3 everytime I try to upgrade to this ver. it stops at the end because it can't find the folder containing the information package "itunes.msi" I have did a search for msi with no luck in finding it. has anyone have this problem with a soluti

eerytime I try to upgrade to this ver. it stops at the end because it cant find the folder containing the missing "itunes.msi" has anyone else experienced this and is there a solution. help. Using XP service pack 3

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I use my new nano (7th gen) to listen to books on CD that i sync from my mac. The problem is, it stops at the end of each CD. How can I get it to continue on to the hanks, Wendy

I use my new nano (7th gen) to listen to books on CD that I sync from my Mac. The problem is that it stops at the end of each CD (very annoying). How can I get it to continue on the the next CD? Thanks, Wendy

Have you tried a different pair of earbuds/headphones to rule out a pair of damaged/faulty ones? You might also want to make sure the headphones are securely and firmly seated in Nano's headphone jack. Lastly, check the headphone jack for any signs of debris or damage. You may need to have the headphone jack replaced either by Apple or a third party repair company.
I assume this static is present on any track you listen to versus only particular ones?
B-rock

HT1657 i rent a movie and stop before the end how i can fix this

i rent a movie but stops before the end how do i fix this

Welcome to the Apple Community.
Has the rental fully downloaded in iTunes.

Stops at the end of each track

This is probably me but having only got a ipod touch (32gb)and loaded up a album from itenes it stops at teh end of each track and goes back the main menu........whats the deal? and how doo I rectify the problem. I have to play each track and I cant see an option to put this tight? Any advise would be great Thanks

Hello BarbaraJS,
Welcome to our community. The only time that Captivate 1 / 2
should stop at the end of each slide is if you have captured your
screens in Simulation Training, Assessment Training (possibly in
custom mode). Capturing screens in simulation or assessment
training mode will result in Captivate adding click boxes which
will pause the slide until the learner has clicked inside the click
box area and then the movie / project will advance to the next
slide.
If you open your Captivate project and show the Timeline do
you see a click box object on the Timeline panel?
If so then you can either remove each of the click boxes on
the slides that make up your movie / project or you may prefer to
create new Captivate file and from the Recording mode menu choosing
Demonstration mode.
This will then ensure that no click boxes are added to your
Captivate movie / project.
Regards,
Mark

How do I get a song to stop at the end in garageband on ipad 2?

When a song in Garageband (on ipad 2) reaches the end, it immediately loops back to the beginning and starts playing again. I'd like to use Garageband as an accompaniment to live performance. So, how do I get the song to stop (and not restart) at the end?

I really wish the Apple team would fix this. It's one of those nagging things that was overlooked, I would imagine, and no one but musicians that perform would notice.
Anyway, my workaround is this. I just put a really long silent space at the end of the song giving me time to stop it before it loops.
Hey ipad/garageband team - How about a new release of gargageband?

Infinity rollout stopped at the end of my street ?...

Similar Messages

Maybe you are looking for