Infinity2 just hanging on web pages

I have started to notice in the last couple of days that I log on to a website and it just hangs.. I keep having to refresh to get it going and sometimes it just takes ages getting web pages to load!
If I do a speed test I am still getting 62mb down and 17mb up and I have re booted the router... and mac and it is still the same
any ideas?

Plenty of other people having the same issue, myself included.
See the following threads:
https://community.bt.com/t5/BT-Infinity-Speed-Connection/BT-Infinity-issues-for-the-last-few-days/td...
http://community.bt.com/t5/BT-Infinity-Speed-Connection/DNS/td-p/1418137
http://forums.thinkbroadband.com/bt/f/4376654-dns-routing-issue.html
So far nobody has managed to get BT to acknowledge the issue 

Similar Messages

  • Why my notebook sometimes blacks out, in Windows 7, when I watch video online or just browse some web pages which contains quite a lot pictures?

    Why my notebook sometimes blacks out, in windows 7,  when I watch video online or just browse some web pages which contains quite a lot pictures?
    1. I am not sure whether it is the problem of the graphic hardware, relevant softwares or the system itself.
    2. I am not sure whether browsing a webpage with a lot pictures would make the graphic hardware, or other hardwares if possible,  massively burdened and then just crash.
    3. Or if possible, is the reason that the heat dissipation doesn't work well?
    I am looking forward to any replies that might be helpful. Really appreciated.

    it could be heat, not enough RAM, but you don't tell us enough.
    There is no reason to assume this is anything other than running Windows natively btw.
    Browser  of course matters probably the most.
    I like IE10 now, but use to use FF until recently. I'd like Chrome except for a few concerns I have over using it, it can eat up a lot of RAM and it builds up HUGE disk cache if you don't clear history and cache on exit and run CCleaner regularly ( good for all browsers )
    So assuming 64-bit and 4GB or more and core i5 or better...
    Also make sure Wiindow has 10GB of free space or more.
    Biggest concern is what happens afterwards and whether you have run a check of your hard drive (chkdsk on startup) or if the problem cascades and gets progressively worse on top of the first - like do you have to do hard restart or able to bring up Task Mgr and kill or better yet, Resource Mgr and see if you have any thread locks.
    Safari is not well versed in multithreading and handling what you want to do and are doing. IE9 isi usually good but I found it could not handle a lot of tumblr photo streams and sites. Try Chrome. With Firefox, use noscript, blashblock and see how it goes.

  • Do I need to pay $99/year per employee just to test web pages on IOS simulator?

    Hi there, I run a small web development shop with 5 employees. We all bought Xcode through the app store and have been using the iOS simulator to test web pages and troubleshoot problems with our customers sites on iPhones and iPads.
    I just upgraded to Mountain Lion, and it seems I lost my iOS simulator.  I tried to install it through XCode again, and it says I need a developer account, which is $99/year.
    We don't develop apps, we just use the simulator to view websites locally and on the web.  Does this mean if I want all of my employees to be able to just simply use the simulator to view web pages, that I have to pay $500 per year to Apple?  Am I missing something here?  Why could we use the simulator's basic features for free under Snow Leopard, but not under Mountain Lion with the new version of the simulator?
    Please tell me I'm an idiot and am just missing something about how to install it or configure it.  Thanks so much for your help!

    See, I am an idiot.  It was right there.  Somehow I think Alfred lost how to launch the simulator in the update to Mountain Lion. Since I couldn't launch it like I used to, I dug around until I found the Preferences > Downloads screen and had the option to install "iOS 5.0 Simulator" which is when I was prompted to get a developer license.
    I never found the Xcode > Open Developer Tool method of locating it. 
    Anyway, thanks so much for your time!

  • I have downloaded the free trial but when I try to open Adobe Illustrator it just opens a web page with tutorials.

    Hello, I have successfully downloaded Creative Cloud and from there downloaded AI but when I try to open it all that happens is a webpage opens with three tutorials.   The program itself doesn't open.
    Any help would be much appreciated. 
    Many thanks.
    Sarah

    I hope you don't mind but I have added an image as I'm not very technical. 
    I have downloaded Creative Cloud and you can see that I have downloaded AI or so I thought.  When I try to open it I just get taken to the web page shown with the tutorials.  There is a download option in the top right hand corner and when I select that it just opens up creative cloud again. 
    I am sure I am doing something that makes me a complete idiot but I am not sure what else to do. 
    Thanks for your response.

  • After installing 3.6.10 firefox does not open selected web pages just gives garbage web pages at random. Had to use explorer just to get here

    after updating to 3.6.10 firefox loads wrong web pages. Had to use explorer to get help. All web pages won't load just bookmarked pages.

    Can you clarify something. Is it just bookmarks that you are having problems with, or do you get this problem when clicking on links or typing an address in the location bar.
    If it is just bookmarks, a possible cause is a damaged places.sqlite file (the file that stores bookmarks), for details on how to fix that see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
    If it is clicking on links, being re-directed on search engines etc, then this can be caused by malware. Try running several malware scanners. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
    * [http://www.malwarebytes.org/mbam.php Malwarebytes]
    * [http://www.superantispyware.com/ SUPERAntiSpyware]
    * [http://www.lavasoft.com/products/ad_aware_free.php Ad-Aware]
    * [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx Windows Defender]
    * [http://www.safer-networking.org/en/home/index.html Spybot S&D]

  • Issues with IE 7 and getting to the site - just hangs and then page cannot be displayed

    Works fine if I open another browser and try to get to site - anyone else having this issue?

    nitekram wrote:
    My company only supports IE 7, you will find that most companies will not upgrade just to upgrade. Though this was working just a few days ago. I am not going to rule out that it might just be a bug in my browser or a reboot is in order. Just not able to reboot anytime I want while at work.  OK--company/work computers can be restrictive.  And it may just be something that a reboot will cure.  Good luck!
    I do not even use IE on my computers, FF is the way to go. 

  • Hi. I just purchased an iPhone 5. Just as a web page has loaded there is a slight static sound. Is this normal?

    Hi. I have just purchesed an iPhone 5 and notice a very faint static sound on hte jeadphones when I load a webpage. Is this normal?

    I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

  • Is it possible to get a virus on an ipod touch from just visiting a web page?

    or can a virus get onto my ipod that can watch  what i am doing an steal account passwords. i do, however, delete my cookies and data and history via safari settings about once a day.

    No, iOS devices don't get viruses.

  • Even on my new MBP Safari just hangs. And on the 2 MacBooks too

    Wow. So I've bought myself a MacBook Pro. 2ghz. Up from a 1.67ghz AL PowerBook.
    I had posted before with my PB on how Safari just hangs at loading pages. The blue URL bar just hangs at 3/4 of the way. And sits thre for minutes or forever.
    My only solution has always been to just do Apple Key and letter R as part of each page I go to in Safari. And this loads the page and it comes up instantly. So it's the initial going to a new page that chokes Safari.
    So I upgrade to a 2ghz MacBook Pro and two 2ghz Macbooks.
    And wouldn't you know it, Safari does EXACTLY the same thing. Hangs. Chokes. Beach Ball of death too now. ***
    And I also had previously posted on visiting the Apple Store and Safari hung up on their machines too.
    I keep my Safari cache folder read only. And the Favicon folder also read only. I have an honest 30Mbps cable connection. And the kicker, like before-
    Firefox flies and loads pages instantly! With Safari hanging and choking, I'll open Firefox and go to the page Safari is hangin and choking and, BAM. Page loads right up in Firefox. WOW
    What is it with Safari Apple? I can't imagine one PC user switching to Mac if on testing the web in an Apple Store and the web "seems so slow" to them. It's the dog Safari.
    So as I type this on my new MBP using Firefox, does anyone think Apple will ever address this issue? Others have posted saying they get the exact same thing with their copy of Safari.
    Can any imagine Steve in his office using Safari thinking this is the way a browser is supposed to work? He must be using Firefox too.
    MacBook Pro 2.0ghz Mac OS X (10.4.7) 2gig of Ram

    No it's Safari.
    Here are screen shots of the hang:
    http://s78.photobucket.com/albums/j100/thewizardknowsall/?action=view&current=Pi cture3.png&refPage=&imgAnch=imgAnch1
    http://s78.photobucket.com/albums/j100/thewizardknowsall/?action=view&current=Pi cture2.png&refPage=&imgAnch=imgAnch2
    http://s78.photobucket.com/albums/j100/thewizardknowsall/?action=view&current=Pi cture1.png&refPage=&imgAnch=imgAnch3
    I have three people here that this happens too. At different locations. 2 MacBooks and one MacBook Pro. We all updated from 2 iBooks and 1 PowerBook.
    And Safari does this. This is how Safari works. If we go to the exact smae sites in Firefox, the sites load instantly. Insantly!!
    I think Apple needs to ddress this issue. As I've found here in the discussions, this IS how Safari works many many thousands of users.
    MacBook Pro 2.0ghz   Mac OS X (10.4.7)   2gig of Ram

  • Web pages and/or images not loading

    This problem started a few weeks ago once every few days or so, then got more and ore frequent where now it is happening multiple times each day.
    I am using Safari 6.1 on an iMac running OS 10.7.5
    Random web pages (some way more than others) will not load when I go to them. Sometimes, the text of the pages will load, but no images. Sometimes the URL progress bar will go across about an inch and the screen will go to blank white (this is most often) and it will just sit there. If I leave it alone, usually the web page will finally load about 4-10 minutes later on its own.
    I have talked with my ISP and we have tried the following fixes, with no positive results:
    When the problem happens, I try pinging the website {using Network utilities) and it always pings just fine.
    When the problem happens, I run Traceroute (using Network utilities) and email him a screen shot of the results.
    I have changed my DNS numbers to OpenDNS, per his comments.
    I have removed the router and plugged in direct.
    I have replaced all my Cat5 cables with new Cat6 cables.
    While the problem is happening, he can ping me just fine from his end.
    When the problem happens, I open Firefox and go to the same site, and have the same blank results in Firefox.
    When the problem happens, I can open a new Safari window and go to other sites just fine.
    This morning, I had the same issues, so I left it to clear on its own. I then went to Outlook to check my email and I had two emails where the images would not load at all, just like the web pages. So I left it alone for over 20 minutes and still no loading. Then I quit Outlook, re-opened it and the images came in just fine. During that 20 minutes, the web pages loaded in Safari in the background.
    I found and read a discussion about this issue  (  https://discussions.apple.com/message/22125235#22125235  ) and per that conversation, I created a GUEST user account, closed out of my account and logged in as a GUEST. I then used Safari to browse the web ans while it was faster, eventually after about 30 minutes, I found a page that would not load (one of my usual suspect pages). I then sat back and let it go and after 5 minutes, the page loaded just fine.
    HELP!!!!!
    John

    Interesting side note . . .
    After writing this (above), I clicked on the SUBMIT button at the bottom of the page and the screen went blank white and it sat there for more than five minutes, when it finally went through. SO, i had my problem occur while submitting my question about the problem!
    Awesome!

  • How do i publish to the web page?

    i put lion server on my MB Pro.  It's up.  When I http to the IP address, I get the default web page. my question is how do I publish to this web site?  I've tried FTP access and it doesn't look like that's supported.  I tried opening the site with dreamweaver and no joy.
    I'd like to just create a web page and publish it to the mac server but i don't know how.
    i guess I could create a web page in iweb and publish it to the sites\default but I was wanting to do it from a remote location.  is that doable?
    thanks
    cliff

    I suggest you upgrade to the latest iWeb version while copies are still availalbe: iLife '11 - Apple Store (U.S.).  That's because it's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
    HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.
    This also may be of some interest to you: Life After MobileMe.
    OT

  • Web pages posted to .Mac using iWeb do not render correctly on IE

    Okay, let's face it - most people out there use Internet Explorer (IE) to view web pages. I just published my web page using iWeb onto my iMac account. The web site renders correctly on my Mac, but does not render correctly on my PC using IE at work. Several other people using IE saw similar problems. For example, IE does not show the links until you run your mouse over them. Also, the text renders as an image (you cannot select text individualy). What do I do to ensure that all the world views the site correctly? Thanks.

    Welcome to the discussions, stoma.
    You'll have to essentially dumb your site down to IE level. Get rid of the cool effects, the transparencies, the rotated images, basically everything that makes iWeb so impressive to use. Make a nice plain site with no frills and you're 90% of the way to near 100% IE compatibility.
    Take all of your images and edit them outside of iWeb (like with other web applications) and that's another significant chunk. There will be a few bits left over, but some of those will be things you can't do anything about (like some of the page elements being created as .png's). You'll be as close to IE compatible as you can get with iWeb.
    Post your URL to let other users post as to what your SPECIFIC site would need.

  • Bookmarks and web page display question

    I have been used to using Netscape and Internet Explorer where you can have a vertical column of bookmarks running up and down on the left side...and then the window to the right will display the web page...i.e., you don't have to click on a separate bookmarks page, open your link, and then toggle back to the Bookmarks page.
    I like the idea of having ALL of my many bookmarks available to me on the lefthand side while seeing the pages open in the window to the right.
    Is there any way Safari can provide close to that same layout? I know about how to use tabs and I know of the bookmark horizontal bar, but I do miss the vertical on the left bookmarks column showing everything (several hundred) and just clicking and having the web page pop open on the right while keeping all my bookmarks available on the same screen.
    Can Safari do this? Or what might be the closest workaround?
    Thanks,
    John

    Sorry for the confusion, here's a more detailed description of what I'm aiming for.  Also, I don't have any web pages published or a web host yet so I can't post a URL to my page.
    This Adobe forums page acts just like my web page.  On the right side of this Adobe page, there is a gray and white checkered design.  If the bookmarks (or favorites) are closed (I am using Firefox with a bookmark toolbar on the left side), then the checkered design is pretty wide.  If the bookmark toolbar is opened, then part of the checkered pattern is cut off from view, but the left side of the page is still completely in view.
    Coca Cola's website is more of how I want my website to be:   http://www.coca-cola.com/index.jsp
    On both sides of Coca Cola's website, there is a gray-white gradient.  If the bookmarks are closed, then the gradient pattern on both sides are exactly equal in width.  If the bookmarks are opened, then part of the outside portion the the page is cut off on both the left and right sides quite a bit, but the gradient design widths on the left and right are both still equal in width.
    So if the opened bookmarks are going to cut off part of the web page from view, I would prefer to have both parts of the left and right side removed instead of just the right side.  I tried centering the page by following David Powers' thread, but either I didn't do it correctly or it didn't help with this problem.
    I hope this was clearer.

  • InDesign form to web page

    I did a simple form in InD and put the PDF in a Freeway web page... Freeway converts the PDF image to a 72dpi jpeg.
    Is it possible to get a very high quality representation of the form on the web using any InD (or Ily) export tools from this form? It's got some relatively small typesizes (9pt) on it that aren't reproducing well at all on the web page. I've included a link to the actual PDF on the web page, but I just wanted the web page image to be more legible.
    Thanks.

    Granted that it doesn't have all the bells and whistles, it works for me. I tried some of the others (Dreamweaver, SiteGrinder) and keep coming back because of it's simplicity and ease of creating boilerplate sites.
    The customers that I have and the websites I've done require functionality more than eye candy as well as cost effectiveness.

  • Web page full of symbols when trying to play .mov files

    If I try to stram .mov files I get just a new web page with symbols all over it.
    Works fine though in firefox.
    Any ideas on what may be wrong would be very helpful
    Thx

    Well it used to work fine so I think so. When I try and run the installer you linked to I get a message saying that a later version is already installed- isn't it built into the latest QT releases? One thing I thought of- the original files I think were made on a mac so there were some resource fork files of 4K size. I deleted these as I kept trying to open them by mistake, but then after this trouble I dragged them back out the trash to the original location but it didn't fix the problem- could that have caused some sort of association problem?

Maybe you are looking for