Influence default mvt for GR in inbound deliveries

Folks,
Is it possible to have mvt 103 as default in the inbound delivery?
Regards,
MdZ

Hi MDZ,
Change the default movement type in SPRO - MM - IM and PI - Settings for Enjoy transactions - Settings for Transactions and Ref Docs
Select The MIGO_GR transaction and ref doc Inbound Delivery and change the movement type to 103.
Hope this helps.
Regards VS

Similar Messages

Inbound deliveries with scheduling agreement

Hi
Can anybody send me the configuration setting need to do for inbound deliveries for scheduling agreement.
-Prabu

Hi Prabhu,
For working with inbound deliveries with SA
Please set up confirmation control in customizing
Spro>mm>purchasing>confirmation>set up confirmation control
set up key as inbound delivery make it relevant to GR and assign this while
creating SA in item detals under conf.control
for further details ref to following thread
Vendor Confirmation
BR
Diwakar
reward if useful

Split inbound deliveries are not getting saved .

Hi,
I have implemented an enhancement for splitting the inbound deliveries with multiple storage locations.
But on save it saves only one document and other inbound delivery documents need to be saved manually.Hence those do not get distributed to EWM.
Please let me know if there is any badi or some enhancement that can be done to carry out the saving of other split douments that get created internally .
Thanks,
Richa .

Hi,
It comes from Idoc as well as can be created manually from the transaction VL31N trasaction.
I have placed my code in the include FV50C201.
likp-zukrl+4(4) = xkomdlgn-werks.
likp-zukrl+8(4) = xkomdlgn-lgort.
This helps to create first but rest is kept as it is.Till we go and save it explicitly.And then it gets distributed to EWM system which is our requirement. This should have happened without manually opening the created ones and saving it again .
Thanks,
Richa

List of Inbound deliveries for POs.

Hi,
I want to pull out a list of inbound deliveries for POs from production data.
I am not even sure that they have these inbound deliveries or not. How do I get a list of POs which have inbound deliveries created.
I tried searching the tables EKKO, EKPO, but of no use.
What is the easiest way out?
Regards
MS

Hi,
This are the list of inbound delivery transaction which may help you;
VL06     Delivery Monitor
VL06I     Inbound Delivery Monitor
VL06IC     Confirmation of putaway inb. deliv.
VL06ID     Inbound Deliveries for Distribution
VL06IF     Selection inbound deliveries
VL06IG     Inbound deliveries for goods receipt
VL06IP     Inbound deliveries for putaway
VL10B     Purchase Orders Due for Delivery
VL10D     Purch. Order Items due for Delivery
VL10E     Order Schedule Lines due fVL10H     Items Due for Delivery
VL10F     PurchOrd Schedule Lines due for Dlv.
VL10G     Documents due for Delivery
VL34     Worklist Inbound Deliveries
VL64     Worklist Inbound Deliveries
VL65     Inbound Delivery Purge Report
VL66     Inbound Delivery Delete Report
VLUNIV     Change Delivery (General)
Br,
Tushar Patankar

"Inbound deliveries for PO reciepts with confirmation control keys"

Hi Gurus,
Can somebody tell me the detailed configuaration steps " Inbound deliveries for PO reciepts with confirmation control keys".
Thanks
Raj

Hi,
Del. type is identified in
OLME-Confirmations-Define Internal Confirmation Categories
Del. item catogery is defined in TCode 0184.
Based on Del. type & item cat. grp in Material master
Goods Recieving point (shipping point) against Plant & SLOC is defined in
Logistics Execution-Shipping-Basic Shipping Functions-Shipping Point and Goods Receiving Point Determination-Assign Goods Receiving Points for Inbound Deliveries

Issue in posting GR in background task for inbound deliveries.

when tried to do Good receipt in batch/background processing for inbound deliveries through std. posting module 'IDOC_INPUT_DLVRY', getting sap abend message as 'Risk of posting several mat.documents for one delivery->long text' VL 621 MESSAGE TYPE A.
But there is no duplicate material documents other than one which would get created when posting GR.
I looked at oss notes 117104, it seems to be cannot be implemented and is found to be suitable for 46a,46b wheras, i am looking for ECC 6.0 release.
Suggest pls.
Thanks,
Madhan.

Can this link help you? Control Delivery's Save - if condition is not meat.
Regards,

WMTA - Output type for Inbound Deliveries

I am looking at the output control requirement in WMTA for Inbound Deliveries by considering vendor address
Scenario:
Domestic Vendors : Trigger WMTA (ie send immediately) as soon as Inbound Delivery
is created
and
International Vendors: Same Output Type WMTA but (ie send with application own transaction)
ie at the time of putaway they change to send immediately and that creates TO.
Is this scenario possible with one outtype (WMTA) ie create TO immediately for domestic deliveries and not for International deliveries ie trigger wmta by going to change mode in inbound delivery.
Please advice
Thank You
Thirumal Reddy

Hello rao,
Right now they dont have any diffrences between vendors and they manually decid e them.
Is it possible to create two confirmational control keys ie 0001 and 0004 for domestic and international vendors in creating inbound deliveries.
and attached them in conditional table and acess seq.
please advice.
Thank you
Thirumal.

Shipping point for inbound deliveries

Hi All,
Please advice on two different sub points listed below.
1. How to assign XXXX shipping point for inbound deliveries for newly created locations.
2. How to create partner storage location
Kindly provide SPRO path
Thanks
Michael

Moderator message: Basic frequently asked question - Please search forum for answers and read the docu in help.sap.com
See as well our rules of engagement: http://scn.sap.com/docs/DOC-18590
A good way to search the forum is with google. See this blog with details for a good search
http://scn.sap.com/community/support/blog/2012/04/16/getting-the-most-out-of-google-optimizing-your-search-queries
The discussions are not a replacement for proper training
This blog describes how to use the SCN search: http://scn.sap.com/community/about/blog/2012/12/04/how-to-use-scn-search
Thread locked

Field Selection for Inbound Deliveries?

Hi SAP Gurus!
Good day! During Creation and changing of Inbound Deliveries (VL31N or VL32N), how can I change the field for Movement Type into Optional? I can't find any Field Selection for Inbound Deliveries in IMG. How will I do this? Please help.
Thank you.
Mik

i believe u need to modify the delivery item category for the inbound delivery as system fetches the movement type from there and if u do not want to make use of the movement type then it means there is no requirement of good reciept
so make use of some delivery item categoy in which putway is not relevant

Inbound deliveries not created for Stock transfer process

Hi Every body
Inbound deliveries not created for Stock transfer process
We have Triggred Y458 output in Shipment VT02n and Output showing Green
But Inbound data not received in PO confirmation Tab
Any body help
Thanks in Advance
SAP MM

Manually processed

List of Inbound deliveries whose GR not done

All SAP Gurus,
How we can know the List of Inbound deliveries whose GR not done for perticular palnt?
Regards,

Hi Rajan,
In VL06I > List Inbound Deliveries
- plant > can be filtered trough SLoc (plant+SLoc identifies a SLoc uniquely) - of course not the best, but can be used...
- fully processed / partially processed GR > 'Total gds mvt stat.' field can be used for this
GR date cannot be given as selection criteria > you have to customize the report and add the necessary fields (plant field can also be added, better than filter plant trough SLoc), create an own query or you can use MB51 as well.
As per my knowledge there's no better standard report than VL06I and MB51 for this purpose.
Csaba

Sending out changes made to inbound deliveries

Hello,
We are sending out inbound deliveries as IDocs using Message type DESADV and IDoc type DELVRY03. We are not able to send the changes made to the delivery. Though change pointers are created we do not see any standard process to process the change pointers. Is there any way of sending the changes to the delivery instead of the whole delivery?
Regards
Indu Shekar

Hi,
You mentioned you tested with your own account, did you try to enable the Automatic reply for yourself or enable it for someone else?
If you tried to enable the Automatic reply for User B and it succeeded, I suspect there's something wrong with the permission granted for User A. Please remove Full Access and then re-add it, then check the result.
Since this issue is more about the mailbox permission in my opinion, you can also post the question in Office 365 Community:
http://community.office365.com/en-us/f/default.aspx
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to Close PO relate Inbound Deliveries w/o posting goods issue?

Hello,
Recently someone helped me in trying to find the status in the ABAP Dictionary of an Inbound Delivery. So thanks!
I have another question, is there a way to close the Inbound Delivery without posting to goods issue or while its still open in the document flow.
I want to ask because the business requirment needs to clsoe these Inbound Delivery Documents for archiving purposes and in SAP they are never closed since the Material Document is created (via MB01) w/o SAP referncing it to the Delivery Document.
I was thinking maybe I can tag a field somewhere or use a BAPI/FM to do this.
I hope to hear from you soon.
Thank you and good day.

You might want to define what exactly do you mean by "close".
As far as I understand, if there has been no goods movement ("goods issue" is for the outbound deliveries, inbound deliveries create "goods receipt", just FYI) or TOs created against a delivery, it can be simply permanently deleted from the database. The corresponding purchase order would then have to be also deleted or somehow rejected (not sure if there is something similar to the SD "rejection reason" in PTP). As an alternative, the PO quantity could probably be changed to 0.
Also it might be an option to change both the received and delivery quantity to 0 and then do "post goods receipt". This should not create any goods movement, but will most likely set the delivery status to 'complete".
Unfortunately, I don't have a system with the deliveries right now to verify these theories...

Automatic creation of Inbound deliveries per HU

Hi Guys
I am looking for any information on how to automatically create inbound deliveries based on Handling units.
The process is
Create PO
Receive ASN with packing details (e.g. one box = i HU)
Auto creation of one Inbound delivery per HU
Any assistance would be appreciated.
Cheers

Steve
I don't know how you figured out it was me.
The answer you have given believe it or not was what I was expecting as I thought it would need development.
As for the value of this the logistics service provider believe that they can control the out away better with one ID per HU per box etc and also we are putting away in WM first and then 'post goods receipt' to update IM. We have a bespoke transaction where they scan the barcodes from the putaway tags in to a copy of LT11 and they can scan up to 100 lines and then save. When the save is activated the transaction checks first how many Transfer order/Lines are on each inbound and then are all of them confirmed when eventually the answer is Yes the system will then go to the Inbound delivery and post goods receipt automatically.
This is so that the Sales office does not see the stock until it is located as backorder processing runs regularly and we do not want orders and deliveries appearing whilst the putaway process is being carried out, However they do want the stock available ASAP. Therefore it is better for them to have the HU-ID as one to one so that in theory materials become available quicker as if one ID had say 100 materials on it none of them would be available until the last one was put away and confirmed.
I hope this explains it and thanks for your assistance.

Creation of Inbound Deliveries through IDOC

Hello All,
I have a scenario wherein through SPRO the configuration has been set to throw an error message in case a new delivery is getting created through VL31N and the total quantity of the inbound deliveries created till now(including the one getting created now) exceeds the PO quantity , but the same is not applicable for deliveries created through IDOC.
For example : I have a PO with order quantity of 2pc's
I create 2 inbound deliveries each of quantity 1 . Now if i try to create a new inbound delivery through VL31N system throws a error message.
But through an IDOC i am able to create any number of deliveries though the total of all the inbound deliveries exceeds the order quantity in PO.
Is there any way that the same SPRO setting can be made active for Inbound deliveries created through IDOC also.
Helpful answers would definitely be rewarded.
Thanks in Advance,
Sowmya.

IDocs and BAPIs sometimes behave differently than transactions. You might need to add a user exit specifically for IDoc processing. Otherwise send a message to SAP and have them look at it.

Influence default mvt for GR in inbound deliveries

Similar Messages

Maybe you are looking for