Info about a specific host server

I have been asked to take over a website and am trying to get
info
about the host system.
I know who the host is, but they have no website for info and
do not
answer my email. In the past, I could use dnsstuff.com to
find out
what kind of box it was, what OS was being run, etc., but
dnsstuff has
converted to a payment service.
What tool can I use to discover this?

Yes, I understand that. What I am trying to say is the
following, and
try it for yourself you will see:
The link that was recommended to me to discover server info
of a host
was netcraft.com.
That link works ONLY if the host has a website present on
their
domain... it gathers info when the web pages are served up.
the host fastdnsservers.com does NOT have a website. As a
result, I
cannot discover info about them, their options, features,
etc.
However, as seen by this link:
http://www.webhosting.info/webhosts/reports/total_domains/FASTDNSSERVERS.COM
they -are- hosting. They will not answer email.
So the original question (modified) remains: how do I
discover
information about what servers, etc. a hosting service is
using? Can
this be done without relying on tools that depend upon
gathering
information from a web page?
On Wed, 21 Mar 2007 22:06:01 +0000 (UTC), Joe Makowiec
<[email protected]> wrote:
>On 21 Mar 2007 in macromedia.dreamweaver, Canned Heat
wrote:
>
>> Thanks to you and Joe for the info, but I probably
have a bigger
>> problem here. The host is fastdnsservers.com.
Apparently they do not
>> have a web site even tho they are currently hosting
6,000+ accounts.
>> With no website, apparently the netcraft link does
not work.
>
>It really doesn't matter whether the hosting provider has
their own
>website. They could be running it on Omega3000 servers on
Mars. What
>matters is what the hosting plan provides. A single
hosting provider
>could have accounts on Windows, Mac, three varieties of
Linux, Sun and
>Cobalt servers.
>
>> So how do I find info about the servers / OS of a
host that offers
>> nothing but a domain name?
>
>Huh?

Similar Messages

  • Info about Japanese iPlanet Directory server

    I am evaluating Japanese localized version of directory server.
    I am not able to find any document which can tell me about the
    localization of this product.
    I have following questions:
    1. What level of localization is done. Has console localized ?
    Does log messages localized.
    2. What env variables I need to set to see console GUI in Japanese
    3. Do I need to set some env variables (like $LANG) before running the start script.
    It is urgent for me, if somebody can answer these or point me to some good doc, it will great
    help to me
    Thanks
    - Bharat

    Hi,
    Info about japanese iPlanet directory Server.
    Gateway is localized for English, Japanese, French, Spanish, and German. You can configure the gateway to support additional locales.
    Language files are stored in /usr/iplanet/servers/dsgw/html/lang and /usr/iplanet/servers/dsgw/config/lang, where lang is defined in RFC1766.
    For example, language files for Japanese are stored in /usr/iplanet/servers/dsgw/html/ja and /usr/iplanet/servers/dsgw/config/ja[true]).
    Support for the character sets necessary to render a particular locale (language) must be available in the browser's configuration.

  • Report info about a specific machine

    Hi,
    Does somebody have a report that gives all information in SCCM about a specific machine between a timespan (like between November 1st and November 21st)?
    We would like as much as possible info about a specific workstation that's available in the SCCM SQL database, for forensic reasons (i.e. software installed, last user logged in, etc).
    The specific workstation has been reinstalled, so checking the workstation itself is not possible anymore.
    Thanks!

    I’m absolutely sure, If the PC exists within CM07 then they data will be exposed via resource explorer.
    http://www.enhansoft.com/
    Hi Garth,
    What if the OS reinstalled machine got the SCCM Client installed now. Will it still show the old history details? or Will it show the current inventory details alone?
    ~ Räjeésh M | Blog:
    ScorpITs | Please remember to 'Mark as Answer' or 'Vote as Helpful' on the post that helps. It helps others reading the thread and recognizes useful contributions.

  • Read .xls from specific path in host server in flex 4.5 using As3xls?

    Hi Guys
    I am New to flex programming and I have some doubts regarding exporting data from excel file to flex
    1) Is there a way of reading excel file from a specific path in host server in flex 4.5 using as3xls?
        i.e is I want to read a flex file from a specific path in the computer.
    2)Is there a way of reading excel file from a specific location in a website?
    I have been trying find a solution to this for a long time but have hit a dead end. any kind of solution will be really helpful. Thanks in advance.
    Regards
    Vivek Mangalam

    Someone suggested it could be a serialisation issue but I I'm not sure how to go about checking that.
    Any suggestions ?

  • Need info about RH Server 6 and reports

    I'm interisted in RH Server 6 but I'm unable to locate much
    practical info about it on the Web site, and a call to sales didn't
    help. I need to know what I'm getting us into before I contribute
    our $2,000. Can anyone provide this information or point me to its
    location on the site:
    --I have system requirements from the Adobe site, but what is
    the "server" and what does installation and setup entail? About how
    how long does it take, or how difficult, to achieve operability?
    --According to a piece by John Daigle, the server component
    should be installed on a Windows server running IIS 5+. Is IIS a
    separate software or standart part of Windows server? If separate,
    what preparation should that server have before the installation in
    addition to installation of IIS?
    --I know nothing about security/firewall protocols. We will
    have our own and our customer firewalls to navigate. Are the server
    setup instructions adequate for setting all that up? Or are
    purchasers expected to have sys admins knowledgeable to set that
    up? Is that applied to the RH server or the Windows server? if RH
    server, how can I get a copy of instructions for my system people
    to review?
    --Have users found the RH server/RoboEngine reliable, once
    it's operable?
    --Is it true that the usage reports aren't customizable? Can
    additional usage data be specified in the RH server?
    --These report summaries are vague--Areas Requiing Help,
    Frequently Viewed Content--stating only that repoorts show the
    suchandsuch done "most frequently" or "most often." Does that mean
    the top 3, 5, 10 or what? Is there a way to track all of that
    activity from most to least?
    --The summaries of the reports Unanswered Questions and
    Frequently Asked Questions say that terms entered in the Search
    field are identified. Questions and terms aren't the same in my
    book--am I right that it captures anything entered? Can it do the
    same for the Index field?
    --I saw no RH server under downloads, or maybe missed it.
    Correct in guessing that a demo version is not available?
    --Is RH server user doc available on the web site? I found
    the Getting Started gude, which isn't much use in evaluating the
    product.
    I have additional questions, but if you can answer these
    questions or direct me to answers some of those may be covered.
    Thanks,
    Mike
    Access database.

    Hey, Mike!
    I found a few things for you. I'm in a hurry, so I'll list
    them quickly.
    For the Trial, go to the Adobe downloads page
    http://www.adobe.com/downloads/
    Then select RoboHelp Server 6 from the dropdown list. You
    will be asked to register (free) if you haven't already. When you
    arrive at the download page make sure you note the Trial Serial #
    To make it easier for you, its:
    1336-1033-2628-5062-0993-4570
    You can also find a RoboHelp Server 6 Getting Started Guide
    here
    http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
    You were asking about IIS. Yes. As Colum says, this comes
    with virtually any version of Windows Server (or Windows XP
    Professional). However, you must install and configure it. I am not
    an IT or web administrator so it took me a while to learn, but
    amazingly I got it to work if you're patient and follow the steps.
    (I'm speaking of both IIS and Robohelp Server) Clearly IIS
    configuration is not a trivial thing and it is assumed that an
    author would have help and cooperation from the IT or Web Admin
    folks.
    As for customizing reports. At present, the existing reports
    are the only ones offered. Since these reports are generated from a
    database (Access, SQL Server or Oracle) I would think (haven't done
    it myself) that someone familiar with database adminstration could
    open the DB (after a backup that is) and be more creative with
    generating customized reports.
    You are right that the "Question" does in fact mean any
    search term or phrase that an end user puts in the search field.
    This is the string that is stored and reported as a question. In
    discussing this with the Adobe team at STC last month, they agreed
    that this was definitely a holdover from the legacy software and is
    due for a change sometime in the future.
    To answer your other question, text entered in the Index
    field is not stored in the database, only the search term field.
    Since taking on the old legacy product from eHelp and
    Macromedia, Adobe is focusing most of its attention on beefing up
    the client authoring app for the next version (Adobe RoboHelp 7).
    My assumption is that they are keen on improving the RoboHelp
    Server as well. I have passed along many feature requests along the
    lines you seem to suggest and hopefully the server will evolve
    along with the client app.
    Even with its limitations, my clients tell me RoboHelp Server
    provides very useful feedback to help them improve their knowledge
    base content to make it more helpful and responsive to users needs.
    They also like the searchability of PDF, Word, PPT and Excel as
    well...something which plain WebHelp without the RoboHelp Server
    does not do.
    I probably didn't get to everything, but hope this helps.
    John

  • Read info about files in specific folder into internal table

    Hi Experts
    I need to have last modified date and filename information read into an internal table. I need to read in the information of all files in a specific (UNIX) folder (I do not know the name of the single files).
    I really hope someone can help.
    Thanks a lot
    Kind regards,
    Torben

    Hi Guys
    Thanks a lot for you input.
    I managed to get my program to works as follows:
    REPORT  ZDELETE_ARCHIVING_FILES.
    *Step 1: Get the list of files in the directory into internal table :
    DATA: DLIST    LIKE EPSFILI OCCURS 0 WITH HEADER LINE,
          DPATH    LIKE EPSF-EPSDIRNAM,
          MDATE    LIKE SY-DATUM,
          MTIME    LIKE SY-UZEIT.
    DATA: BEGIN OF FATTR OCCURS 0,
              FILE_NAME  LIKE EPSF-EPSFILNAM,
              FILE_SIZE  LIKE EPSF-EPSFILSIZ,
              FILE_OWNER LIKE EPSF-EPSFILOWN,
              FILE_MODE  LIKE EPSF-EPSFILMOD,
              FILE_TYPE  LIKE EPSF-EPSFILTYP,
              FILE_MTIME(12),
          END OF FATTR.
    DATA: P_PATH(50) TYPE C.
    CONCATENATE '/ARCHIVE/' sy-sysid '/archive' INTO P_PATH.
    *        WRITE: / P_PATH.
    DPATH = P_PATH.
    *Get files in folder - read into internal table DLIST
    *if filenames are longer than 40 characters
    *then use FM SUBST_GET_FILE_LIST.
    CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
         EXPORTING
              DIR_NAME               = DPATH
         TABLES
              DIR_LIST               = DLIST
         EXCEPTIONS
              INVALID_EPS_SUBDIR     = 1
              SAPGPARAM_FAILED       = 2
              BUILD_DIRECTORY_FAILED = 3
              NO_AUTHORIZATION       = 4
              READ_DIRECTORY_FAILED  = 5
              TOO_MANY_READ_ERRORS   = 6
              EMPTY_DIRECTORY_LIST   = 7
              OTHERS                 = 8.
    IF SY-SUBRC EQ 0.
    *Step 2: Read the file attributes into an internal table
    *Read info about the files (attributes) into the internal table FATTR
    *as we need info about the last time it was changed (MTIME)
      LOOP AT DLIST.
        CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
             EXPORTING
                  FILE_NAME              = DLIST-NAME
                  DIR_NAME               = DPATH
             IMPORTING
                  FILE_SIZE              = FATTR-FILE_SIZE
                  FILE_OWNER             = FATTR-FILE_OWNER
                  FILE_MODE              = FATTR-FILE_MODE
                  FILE_TYPE              = FATTR-FILE_TYPE
                  FILE_MTIME             = FATTR-FILE_MTIME
             EXCEPTIONS
                  READ_DIRECTORY_FAILED  = 1
                  READ_ATTRIBUTES_FAILED = 2
                  OTHERS                 = 3.
        IF SY-SUBRC EQ 0.
          FATTR-FILE_NAME = DLIST-NAME.
          APPEND FATTR.
        ENDIF.
      ENDLOOP.
      SORT FATTR BY FILE_NAME.
      DATA: time(10), date LIKE sy-datum.
      DATA: months TYPE i.
      DATA: e_file TYPE string.
      LOOP AT FATTR.
      CLEAR: time, months, e_file.
        IF FATTR-FILE_NAME(10) = 'archive_BW'.
    *Convert the unix time into readable time
          PERFORM p6_to_date_time_tz(rstr0400) USING FATTR-FILE_MTIME
                                                     time
                                                     date.
    *Calculate the number of months between date (MTIME) and current day
    *ex 31.03.2009 - 01.04.2009 = 1 month
    *ex 01.02.2009 - 01.04.2009 = 2 month
        CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
          EXPORTING
            i_datum_von = date
            i_datum_bis = sy-datum
          IMPORTING
            e_monate = months.
            CONCATENATE DPATH '/' FATTR-FILE_NAME INTO e_file.
    *        WRITE: / FATTR-FILE_NAME,
    *                 FATTR-FILE_SIZE,
    *                 date,
    *                 time,
    *                 sy-datum,
    *                 months,
    *                 e_file.
    *Step 3: Delete files where months > 1
          IF months > 1.
            OPEN dataset e_file for output in text mode encoding default.
            DELETE dataset e_file.
            CLOSE dataset e_file.
          ENDIF. "months > 1
        ENDIF.
      ENDLOOP.
    ENDIF.

  • Looking for infos about error code in Sun Java Directory Server 6.3.1.1.1

    Hi,
    I'm using Sun-Java(tm)-System-Directory/6.3.1.1.1 on Solaris 9 with two server configured in multi-master replication
    For a few time I receive those warning in the error logfile :
    [14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
    [14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
    [14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
    [14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
    [14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
    [14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
    and I would like to know what's going up and what I should do, so in case somebody have some infos about it, I would be very interrested.
    I'm trying to find a way of veryfing fragmentation of the backend, but not sure about this.
    TIA

    Looks like the attribute sunIdentityServerDiscoEntries is defined twice in the schema. Run the following and see where it is defined for the second time.
    # cd /var/opt/SUNWdsee/dsins1/config/schema
    # grep -w sunIdentityServerDiscoEntries *.ldif | grep -iv objectclasses
    Edited by: etst123 on Mar 3, 2009 1:28 PM

  • About settingup tomcat on hosting server

    one of my friend is PHP expert and he has setup his own hosting server for application done in PHP. I have done a website in JSP and Servlets and I want him to host my application on his server. The issue is that he does not know anything about JSPs and Apache TomCat server. I am wondering if some can just help about the issues involved reagrding this:
    I have follwoing questions:
    Is server for JSP and SERVLETS is free to upload on server or licenses etc required?
    Is this hard to setup tomcat on a server? I cansetup everything on PC though(not a network)
    Has someone experience is doing this?
    Do you think a person like me with average knowledge of JSP and SERVLETS shouldtake risk?
    I am trying to google and collecting information about all these issues. I though it's good to have information from someone who has first hand knowledge in this area.
    Thanks

    Areeba wrote:
    Is server for JSP and SERVLETS is free to upload on server or licenses etc required? Read the license of the server in question. As far you can just use Tomcat whenever and wherever you want as long as you don't redistribute it.
    Is this hard to setup tomcat on a server? I cansetup everything on PC though(not a network)It is the same way. Download the zip (or tar.gz in case of *nix system), unpack it and check/set the configuration files in /conf directory.
    Has someone experience is doing this?Uh.
    Do you think a person like me with average knowledge of JSP and SERVLETS shouldtake risk?After all everyone can. Why shouldn't you be able to do so?

  • Dv7-1451nr - I need more specific info about this note, cant find anywhere!

    Whats the memory speed, whats the motherboard supported bus? Whats the motherboard?
    Why there isnt many info about this note around there? Is it new? Terrible? Better options?

    This system should be using using M780G Chipset and supports dual channel DDR2 800MHz...
    If you want advance info on the system spec...try cpuz... http://www.cpuid.com/softwares/cpu-z.html
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Help, how do i find out the host server for a website i have inherited

    hi i inherited responcibilty for a website, simply because
    there was noone else avalable. i have dreamweaver cs3, but only
    about 2 weeks worth of knowledge and experience. I was given info
    ie. ftp address and username etc, so have been able to download the
    website to my home computer, and have been making updates, now
    however i need to find out more about setting up a test server so i
    can use dynamic pages, specifically for collecting form
    information, collecting donations and selling art work. i will need
    some information from the host server to start with, but am unsure
    as how to identify and contact them, can anyone help me please. I
    am sure it is rudimentary, but the information is essential.
    also as a side note, could anyone tell me how to find out
    where the websites domain name is regestered ( other than
    contacting the original designer, as that seem quite impossible)
    because i get the feeling that if all else fails i may be able to
    move the website to another host ( not that i now how yet, or even
    how to select or find a host) please let me know if any of my
    assumptions are wrong.
    Thanking you in advance
    J
    volunteer.

    Hi,
    To find out about the host, go to register.com and look up
    the domain name.
    When it gives you results, it'll say that the name is already
    taken, but it
    will let you do a 'whois' on it.
    Those results can give you some info such as the server DNS.
    That may let
    you figure out the host.
    Sometimes the technical contact in the whois, is the host as
    well.
    "nsfwebnewbie" <[email protected]> wrote in
    message
    news:fmo8cf$3l5$[email protected]..
    > hi i inherited responcibilty for a website, simply
    because there was noone
    > else
    > avalable. i have dreamweaver cs3, but only about 2 weeks
    worth of
    > knowledge and
    > experience. I was given info ie. ftp address and
    username etc, so have
    > been
    > able to download the website to my home computer, and
    have been making
    > updates,
    > now however i need to find out more about setting up a
    test server so i
    > can use
    > dynamic pages, specifically for collecting form
    information, collecting
    > donations and selling art work. i will need some
    information from the host
    > server to start with, but am unsure as how to identify
    and contact them,
    > can
    > anyone help me please. I am sure it is rudimentary, but
    the information is
    > essential.
    > also as a side note, could anyone tell me how to find
    out where the
    > websites
    > domain name is regestered ( other than contacting the
    original designer,
    > as
    > that seem quite impossible) because i get the feeling
    that if all else
    > fails i
    > may be able to move the website to another host ( not
    that i now how yet,
    > or
    > even how to select or find a host) please let me know if
    any of my
    > assumptions
    > are wrong.
    >
    >
    > Thanking you in advance
    >
    > J
    > volunteer.
    >
    >

  • Need deeper info about RPC paradigm

    Having scoured the Web for info about RPC, I find the same few discussions repeated widely, but certain things left unexplored. I therefore have particular questions that remain unanswered.
    1) RPC server behavior appears predicated around "connect-call-disconnect, connect-call-disconnect, ..." behavior on the part of the RPC client; that is, a connect-and-disconnect around every remote procedure call. I, on the other hand, need my clients to implement "connect-wait-call-wait-call-wait-call-...-disconnect" behavior; that is, to connect, REMAIN connected for an extended period of time across multiple procedure calls, and disconnect only when the client is ready to terminate all use of the server. It appears that svc_run() supports this, but I want to avoid surprises; is there any restriction on this usage of svc_run()? Can this paradigm be supported by appropriate use of the RPC library routines available for replacing svc_run() with my own code?
    2) The only "documentation" I have been able to find about how to write actual RPC programs dates back to 1992 and does not come from Sun. Virtually all of the routines appearing in its example programs are designated "obsolete" or "for backward compatibility" in their manpages on Solaris 8. Can you recommend/point to an instructional text that describes RPC programming as it would be done with "today's" interface?
    3) Probably the largest single obstacle to my organization's possible use of RPC in "real," critical applications, is RPC's continuing C-specificity. We write all our applications in C++, and mostly object-oriented C++ at that -- whereas RPC appears not to have advanced beyond the "C with global variables" architecture (with one possible exception, following). Code generated by RPCGEN (without the -C switch, I admit; I haven't gotten that far in my trial-and-error experiments, yet) requires extensive hand-editing in order to compile C++ code that uses it, or link successfully with compiled C++ code. This obstacle is severe enough to potentially render RPC an unacceptable solution for us.
    The possible exception I mentioned is that I found a webpage that discussed something called 'rpcc,' which appeared to be an object-oriented, C++ implementation of RPC. The page said this was available "on Sun machines," but I don't find it on MY Sun machines. Other searches do not turn up other references. Such a thing would be a godsend if it existed, and it would seem not to be so difficult for Sun's professional developers to create. So does it exist? If so, how can I get my hands on it?
    4) Different sources contradict each other as to the "semantics" of an RPC procedure call. Sun's ONC manual says flat-out that Sun RPC provides only "at least once" semantics -- but then, the manual takes the approach that one is using RPC in a "transport-independent" manner. Other references discuss the issue at greater length (hint, hint) and imply that any RPC implementation can provide "exactly once" semantics, providing that one specifically force it to use "a reliable transport such as TCP." It is not clear how much to infer, or disregard, in Sun's simple statement. I need to know FOR SURE whether Sun RPC can be made, forced, tricked, etc. into providing "exactly once" semantics. If so, is "use of TCP" sufficient? Or are other tricks needed? Please outline the necessary steps that might be needed in addition to using TCP.
    5) (Related to 4. Sun documentation contains language to the effect that Sun RPC provides "at least once" semantics because providing "exactly once" semantics "would be too difficult." However, a graduate student (at Syracuse U if I recall correctly) posts a research paper in which he describes an RPC facility, developed from scratch, that provides "exactly once" semantics. Apparently it's not THAT difficult, after all. The fact that it's "too difficult" for Sun does not exactly flatter the company. They may want to revisit this, and provide yet another RPC interface (in C++ while they're at it). I won't even charge a finder's fee. ;-) )
    Thanks in advance,
    Chris

    I agree fully.
    None of the example code applies to todays
    "real-world" applications. Im trying to implement
    multithreaded RPC on Solaris using rpcgen's -N
    "NewStyle", -A "Auto multithreaded" and -C "ANSI C"
    options but none of the examples anywhere show how to
    do this. Is their a better technology that everyone
    is using now that does a similar thing?I have an example that might help. It's a multi-threaded
    NIS server that's been running in production for several
    years. There are a few tricks in the source that might help.
    You can download the source with anonymous FTP at
    ftp.cc.umanitoba.ca. Look in the `src' directory for
    midas.tar.Z.

  • Locally hosted server for Cocomo

    The potential for Cocomo for corporate/enterprise
    applications is substantial, but many (most) corporations will want
    to host the infrastructure behind its firewall for performance,
    availability, and security reasons. Are there plans to provide a
    mechanism for hosting/license the server-side infrastructure for
    enterprise applications?
    Thanks,
    Rick Bullotta
    CTO
    Burning Sky Software

    Hi Rick,
    We recognize that enterprises and government institutions
    will have certain requirements that may or may not be met thru
    Adobe hosted multi-tenant service. We would be interested in
    hearing more about the specific use-case and requirements you have
    in mind. Could you please email us at [email protected] so that we
    can discuss and understand your requirements in detail.
    Thank you,
    Varun

  • Add the Hosting Server IP in Domain Name Server of Microsoft

    Hi,
    I have purchased a domain (techwhiz.info) and web hosting from
    www.net4.in but the email is taken from Microsoft exchange for the same domain so the Domain Name Server is with Microsoft. Now I want to host the site for the same domain and as
    www.net4.in hosting provider told to do a entry of Hosting Server IP in DNS then only the website will show the contents. As I don't know how to do this entry so please tell me the steps to do that.
    If required anything more please let me know.
    Thanks in Advance.
    Pratik Purohit

    I'm having a little trouble with your english, but I think you're trying to do 3 things:
    Host email on an Exchange server
    host a website with net4.in
    setup DNS so that these things work together
    It also sounds like Microsoft is hosting your DNS?  If so, you'd simply create an MX DNS record to point to your Exchange 2010 server, and another DNS record for www.techwiz.info.
    You may wish to call the hosting provider(s) of these services for more specific guidance.  Your question is pretty broad.
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • HT5085 Gathering Info About your iTunes Library - Keep getting Network error

    I bought iTunes Match yesterday, and so far have not been able to use it.
    It gets to Stage 1: Gathering Info About Your iTunes Library and makes progress, but right at the end an error box appears saying:
    "We could not complete your iTunes request. The network connection was reset.
    Make sure your network connection is active and try again"
    Well I know the network connection is active as I was able to be charged for iTunes Match and have had no problems making other purchases. I went to Advance > Run Diagnostics Tests from Help in iTunes and ran the Network Connectivity Diagnostics and it reported no problems.
    Now I know how much Apple hate giving back refunds, but if people can't help, does anyone know how I can get my money back? If I click "Report a Problem" it simply takes me to the help pages. I tried contacting support but I received an email saying they can't help.
    I'm getting quite frustrated now, so I'm reaching out and hoping someone can help me?
    I've copied the diagnostic results below:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Dell Inc. Dell System XPS L502X
    iTunes 10.6.1.7
    QuickTime 7.7.2
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 003CA7C40B1E98E0
    Current user is not an administrator.
    The current local date and time is 2012-05-18 20:20:20.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 540M 
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: bb5c046694c1f4c590202360da9f2bc5
    iPodService 10.6.1.7 (x64) is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {444AF521-4D63-434F-AC33-8F05DA9C6C64}
    Description:          Microsoft Virtual WiFi Miniport Adapter #2
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 00:00:00 1970
    Lease Expires:          Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name:          {4F46CBF3-C53C-4615-AF14-B46B9785D100}
    Description:          Microsoft Virtual WiFi Miniport Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 00:00:00 1970
    Lease Expires:          Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name:          {6D3CAB28-0C0B-4701-A440-B1A90BE75551}
    Description:          Dell Wireless 5540 HSPA Mini-Card Network Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Thu Jan 01 00:00:00 1970
    Lease Expires:          Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name:          {8C130DAB-E810-4FA6-8946-1600FFE0DB2F}
    Description:          Intel(R) WiFi Link 1000 BGN
    IP Address:          192.168.1.69
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.254
    DHCP Enabled:          Yes
    DHCP Server:          192.168.1.254
    Lease Obtained:          Fri May 18 20:01:40 2012
    Lease Expires:          Sat May 19 20:01:40 2012
    DNS Servers:          192.168.1.254
    Adapter Name:          {B32D9395-8937-42EC-BC5F-352D07958EDF}
    Description:          Realtek PCIe GBE Family Controller
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 00:00:00 1970
    Lease Expires:          Thu Jan 01 00:00:00 1970
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-05-18 20:14:07.

    @ deggie, I wasn't threatening ANYONE. I was simply saying how frustrating this has become, seeing how I have been trying on my own to figure this issue out for more then a month with no results. Like I said in the beginning, I have not used any other account to purchase apps or other products on my phone. I have only ever used one account. There are 23 apps that are saying they can't sync. It directs me to authorize the computer, which I do but it doesn't change the outcome. If I proceed, I lose those 23 apps correct? Do I also lose all my text messages saved, and other things such as documents in the "notes"?

  • How to backup Hyper-V host server on DPM 2012 R2

    Hi,
    I'm about to backup my first Hyper-V host server using DPM 2012.  I'm looking for a strategy to back up both the host server and virtual machines.  Note:  I'm not really interested in backing up all the virtual machines.  Many are non-production
    or for testing.  How do you do it?  I was thinking about selecting in the protection group:
    - BMR and SS for the Hyper-V host
    - The C: volume of the Hyper-V host
    - Select the Child partition snapshots of the virtual machines I want to backup.
    In my environment, Hyper-V role is installed on the C: drive, but the virtual machines are stored on E:, which I would not backup directly (volumes) since I'm backing up the VMs using Child partition snapshot.
    Would I be able to restore my Hyper-V host and the selected VMs with a backup like this?
    Anyone want to share how they setup their protection groups for Hyper-V?
    Thanks.

    No, use full server backup (image) if VM config are stored at default storage (disk  C).
    Understanding where your virtual machine files are [Hyper-V]
    Using this method to perform a full server backup is the recommended method because it captures more data than the other method.
    Backing Up Hyper-V Virtual Machines
    http://social.technet.microsoft.com/Forums/en-US/4592bad3-9f5d-4313-b9a0-9da6de7f43c2/restoring-vm-settings?forum=winserverhyperv
    Have a nice day !!!

Maybe you are looking for