Info about ASA 55xx

Hi
i'm starting to read about ASA 55xx in Cisco website. But after some good reading, I have some questions.....
In Cisco Docs about ASA55xx, I see the "Maximum concurrent AnyConnect or clientless VPN sessions" and "Maximum concurrent site-to-site and IPsec IKEv1 VPN sessions" (e.g. 750 both): well, the maximux concurrent sessions are 750+750 (anyconnect + site-to-site), so I have to add the two types of sessions? Or what are the maximum concurrent sessions (of each type) in ASA5520?
So, at this point, if I want 750 AnyConnect Session and 750 site-to-site Session which license do i need to buy? ASA5500-SSL-750 ? ASA-VPNS-1000? or whatelse?
then, what are the "shared" license? When and where do i need to buy them?
thanks in advance.
Bye

Platform capabiliites and required licensing are as noted in the product data sheet:
Up to 750 AnyConnect and/or clientless VPN peers can be supported on each Cisco ASA 5520 by installing an Essential or a Premium AnyConnect VPN license; 750 IPsec VPN peers are supported on the base platform. VPN capacity and resiliency can be increased by taking advantage of the Cisco ASA 5520's integrated VPN clustering and load-balancing capabilities. The Cisco ASA 5520 supports up to 10 appliances in a cluster, offering a maximum of 7500 AnyConnect and/or clientless VPN peers or 7500 IPsec VPN peers per cluster.
Reiterating:
The ASA 5520 750 site-site VPN capability is in the base license / product (Part number ASA5520-BUN-K9 or ASA5520-K8 depending on whther you are eleigible to pruchase the strong encryption (-BUN-K9) version)
The AnyConnect user licenses required depend on whether you need Anyconnect Essentials or Premium. The Anyconnect data sheet outlines the differences. Essentials is one license that allows up to 750 clients to use the appliance simultaneously. Premium (which cannot be loaded at the same time as Essentials) requires the licenses to be purchased according to the tiered per user scheme.
Shared licenses are shared among ASAs in a cluster (2 or more units configured together).
There is the concept of licenses in a failover (2-unit) cluster. That is automatic - i.e. the license numbers are additive and shared up to the platform capability. the ASA5500-SSL-750 part would be used in that setup.
There is also the concept of an anyconnect Premium Shared Server. In that scheme, the shared server allocates licenses in 50 unit blocks to the cluster membes ars they need them. The ASA-VPNS-1000 part number you mention is used in that sort of setup.

Similar Messages

Any info on ASA hardening

Is the ASA pre-hardened? Any info about hardening this ASA?

Hi Michael,I understand now where you are coming from and thank you for clear explanation. The answer to your question I think is short. The cisco PIX/ASA firewalls by default comes to the end users already pre-hardened,to prove this a firewall out of the box comes with default configuration.
The Firewall will at least have there important components, that is,PIX OS code,
inside,and outside interfaces. As you may well know the two interfaces are outside and inside interface. The default firewall configuration will always comes as such with outside interface with security level of(0 Zero)as the un-trusted interface or interface facing outside world, security 0 with no firewall implicit inbound access rules for connection means nothing will come inbound as requested traffic from outside as all inbound traffic is blocked. In other words, all TCP/UDP ports are blocked by default, on the other hand the inside interface comes as default with security level of 100 trusted side and some but not all ports in this interface are opened to go outbound. This is a fundamental aspect of the firewall, until you explicitly start opening or allowing inbound traffic then there is where DMZ and other aspect of security architecture comes in place such as IPS or intrution detection systems etc..
I hope I have contributed to answer your question, I could not find a document explaining the hardening of a firewall because I don't think there isn't one, however, there are many documents in security design guidelines that shows best practice for securing networks from either outside and/or internally.. I found though a link where at least says all ports by default are blocked for outside interface security 0.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080862017.shtml#intro
rate any helpful post if it helps !
Rgds
Jorge

New ASA 55xx

I currently have a 3725 + the NM-CIDS module doing my firewall / IPS / VPN.
I'm considering upgrading to a ASA 55xx box.
I was reading the product page, and it does not seem that I can have one ASA box that does both the IPS with an AIP-SSM-xx and the anti-virus with an CSC-SSM-xx because the box only has one SSM slot.
I also need this box to be compatible and take over the peer to peer VPN that the 3725 is doing with my current IOS. I have several remote 87x router connected over ADSL and cable connection with active IOS VPN. My 3725 currently has a AIM VPN card to help the CPU. If I change it to a ASA box will I have to re-configure all the remote 87x routers?
Thanks...

I would use one ASA with the AIP-SSM module.
And then place a seperate Anti-x type of device at the back. Having a seperate ASA for the CSM module is overkill IMHO.
There is no real integration between the CSM/IPS module anyway, so you still have to manage different GUIs. A good option would be to go for IronPort, since they are now part of Cisco, there might be some neat integrations coming along in the future (giving you more value for money). There is'nt any great feedback about the CSM module, most people I know don't like to position it, including some Cisco CSEs themselves(its based on Trend Micro btw)
Regards
Farrukh

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

HT5085 Gathering Info About your iTunes Library - Keep getting Network error

I bought iTunes Match yesterday, and so far have not been able to use it.
It gets to Stage 1: Gathering Info About Your iTunes Library and makes progress, but right at the end an error box appears saying:
"We could not complete your iTunes request. The network connection was reset.
Make sure your network connection is active and try again"
Well I know the network connection is active as I was able to be charged for iTunes Match and have had no problems making other purchases. I went to Advance > Run Diagnostics Tests from Help in iTunes and ran the Network Connectivity Diagnostics and it reported no problems.
Now I know how much Apple hate giving back refunds, but if people can't help, does anyone know how I can get my money back? If I click "Report a Problem" it simply takes me to the help pages. I tried contacting support but I received an email saying they can't help.
I'm getting quite frustrated now, so I'm reaching out and hoping someone can help me?
I've copied the diagnostic results below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.6.1.7
QuickTime 7.7.2
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 003CA7C40B1E98E0
Current user is not an administrator.
The current local date and time is 2012-05-18 20:20:20.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: bb5c046694c1f4c590202360da9f2bc5
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {444AF521-4D63-434F-AC33-8F05DA9C6C64}
Description:          Microsoft Virtual WiFi Miniport Adapter #2
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {4F46CBF3-C53C-4615-AF14-B46B9785D100}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {6D3CAB28-0C0B-4701-A440-B1A90BE75551}
Description:          Dell Wireless 5540 HSPA Mini-Card Network Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {8C130DAB-E810-4FA6-8946-1600FFE0DB2F}
Description:          Intel(R) WiFi Link 1000 BGN
IP Address:          192.168.1.69
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.254
DHCP Enabled:          Yes
DHCP Server:          192.168.1.254
Lease Obtained:          Fri May 18 20:01:40 2012
Lease Expires:          Sat May 19 20:01:40 2012
DNS Servers:          192.168.1.254
Adapter Name:          {B32D9395-8937-42EC-BC5F-352D07958EDF}
Description:          Realtek PCIe GBE Family Controller
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-18 20:14:07.

@ deggie, I wasn't threatening ANYONE. I was simply saying how frustrating this has become, seeing how I have been trying on my own to figure this issue out for more then a month with no results. Like I said in the beginning, I have not used any other account to purchase apps or other products on my phone. I have only ever used one account. There are 23 apps that are saying they can't sync. It directs me to authorize the computer, which I do but it doesn't change the outcome. If I proceed, I lose those 23 apps correct? Do I also lose all my text messages saved, and other things such as documents in the "notes"?

HT1206 Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

ITunes and Finder - how are info about audio files refreshed?

I am now in the process of embedding artwork in my mp3-files using CoverScout. I have also updated info about all my tracks in the iTunes after embedding the artowrk, by selecting all the files and clicking GeitInfo and clicking OK (without making any changes). All albums are displayed correctly with new artworks. This, however, is not the case with the Finder.
Generally, if a mp3-file has (embedded) artwork then the file would be displayed as a thumbnail of the artwork in question. The thing is that the icons for the mp3-files that were recently embedded with artworks are displayed as lacking artwork (they are displayed with the simple iTunes icon). Moreover, the Preview of GetInfo window does not show that the mp3-files contain the embedded artwork. The files are not refreshed. However, if I copy or duplicate those files then the copied files are displayed correctly, with the right getinfo. This, however, does not work if moving files. The files are not refreshed when moved, only when copying or duplicating.
I find it curious that Finder does not refresh the files, even after restarting the Mac, given the fact that iTunes have the information that there is artwork. Is there a way to refresh the files in the finder without copying or duplicating the files?
Another curious thing with albums containing tracks with embedded artwork is as follows: the Finder displays some of the tracks as thumbnails of the artwork in question, but not with all the files. The same goes for the Preview of the files in GetInfo. Some have the correct Preview displaying the artwork, but some lack the info about the artwork in the Preview. Why are not all files displayed as having embedded artwork, but only some, given the fact that they belong to the same album and the artwork was embedded in the same way?
The same goes when I embed the artwork without CoverScout, by updating multiple files through iTunes (dragging the artwork to the Artwork-field in Info). The Finder does not display that the files are embedded. I must copy or duplicate these files in order to refresh the info.
A more general question: how do I refresh files in the Finder? There is no refresh button, as in the Windows.
I would appreciate your help.
Kind regards
Alex

I was wrong about one thing concerning refreshing the files. I said that restarting the Mac would not refresh the files. However, if the iTunes have info about album's/tracks artwork then the Finder will also have this info after rebooting the system. My question is whether the Finder can be refreshed, without rebooting (restarting)?

Need info about programming with InCopy

Hi,
I have a client who has stored thousands of InCopy documents with valid styles applied to segments of it.
Now my requirement is to create a template which has XML tag -> Style mapping.
Considering that template, I am suppose to open all the InCopy documents, apply that Tag -> Style mapping to it and then convert all of them to XML and persist the data in DB.
Is there a programmatic way as to apply XML tags to a document based on the styles used?
Please educate. I am a complete newbie to InCopy - so please bare with my questions,
Thank you, Appreciate your help.
Regards,
Chintan

You could download and deploy "struts-example.war" from apache website.
          [That Struts 1.0.2 I think.]
          ---Nam
          Jordy wrote:
          > I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
          And God said
          Let there be numbers
          And there were numbers.
          Odd and even created he them,
          He said to them be fruitful and multiply,
          And he commanded them to keep the laws of induction.
          [Bill Taylor [email protected]]
          [nam_nguyen.vcf]

Need info about RH Server 6 and reports

I'm interisted in RH Server 6 but I'm unable to locate much
practical info about it on the Web site, and a call to sales didn't
help. I need to know what I'm getting us into before I contribute
our $2,000. Can anyone provide this information or point me to its
location on the site:
--I have system requirements from the Adobe site, but what is
the "server" and what does installation and setup entail? About how
how long does it take, or how difficult, to achieve operability?
--According to a piece by John Daigle, the server component
should be installed on a Windows server running IIS 5+. Is IIS a
separate software or standart part of Windows server? If separate,
what preparation should that server have before the installation in
addition to installation of IIS?
--I know nothing about security/firewall protocols. We will
have our own and our customer firewalls to navigate. Are the server
setup instructions adequate for setting all that up? Or are
purchasers expected to have sys admins knowledgeable to set that
up? Is that applied to the RH server or the Windows server? if RH
server, how can I get a copy of instructions for my system people
to review?
--Have users found the RH server/RoboEngine reliable, once
it's operable?
--Is it true that the usage reports aren't customizable? Can
additional usage data be specified in the RH server?
--These report summaries are vague--Areas Requiing Help,
Frequently Viewed Content--stating only that repoorts show the
suchandsuch done "most frequently" or "most often." Does that mean
the top 3, 5, 10 or what? Is there a way to track all of that
activity from most to least?
--The summaries of the reports Unanswered Questions and
Frequently Asked Questions say that terms entered in the Search
field are identified. Questions and terms aren't the same in my
book--am I right that it captures anything entered? Can it do the
same for the Index field?
--I saw no RH server under downloads, or maybe missed it.
Correct in guessing that a demo version is not available?
--Is RH server user doc available on the web site? I found
the Getting Started gude, which isn't much use in evaluating the
product.
I have additional questions, but if you can answer these
questions or direct me to answers some of those may be covered.
Thanks,
Mike
Access database.

Hey, Mike!
I found a few things for you. I'm in a hurry, so I'll list
them quickly.
For the Trial, go to the Adobe downloads page
http://www.adobe.com/downloads/
Then select RoboHelp Server 6 from the dropdown list. You
will be asked to register (free) if you haven't already. When you
arrive at the download page make sure you note the Trial Serial #
To make it easier for you, its:
1336-1033-2628-5062-0993-4570
You can also find a RoboHelp Server 6 Getting Started Guide
here
http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
You were asking about IIS. Yes. As Colum says, this comes
with virtually any version of Windows Server (or Windows XP
Professional). However, you must install and configure it. I am not
an IT or web administrator so it took me a while to learn, but
amazingly I got it to work if you're patient and follow the steps.
(I'm speaking of both IIS and Robohelp Server) Clearly IIS
configuration is not a trivial thing and it is assumed that an
author would have help and cooperation from the IT or Web Admin
folks.
As for customizing reports. At present, the existing reports
are the only ones offered. Since these reports are generated from a
database (Access, SQL Server or Oracle) I would think (haven't done
it myself) that someone familiar with database adminstration could
open the DB (after a backup that is) and be more creative with
generating customized reports.
You are right that the "Question" does in fact mean any
search term or phrase that an end user puts in the search field.
This is the string that is stored and reported as a question. In
discussing this with the Adobe team at STC last month, they agreed
that this was definitely a holdover from the legacy software and is
due for a change sometime in the future.
To answer your other question, text entered in the Index
field is not stored in the database, only the search term field.
Since taking on the old legacy product from eHelp and
Macromedia, Adobe is focusing most of its attention on beefing up
the client authoring app for the next version (Adobe RoboHelp 7).
My assumption is that they are keen on improving the RoboHelp
Server as well. I have passed along many feature requests along the
lines you seem to suggest and hopefully the server will evolve
along with the client app.
Even with its limitations, my clients tell me RoboHelp Server
provides very useful feedback to help them improve their knowledge
base content to make it more helpful and responsive to users needs.
They also like the searchability of PDF, Word, PPT and Excel as
well...something which plain WebHelp without the RoboHelp Server
does not do.
I probably didn't get to everything, but hope this helps.
John

Need Info about BW CRM Analytics

Hi all,
Guys,
Please help me out...
I need Info about BW with CRM Analytics
What are the core areas where data's are extracted for CRM to BW
What will be the Interview question related to BW CRM Analytics
If possible if u have any docs kindly email me at [email protected]
Thanks in Advance.
Jaffer Ali.S

Dear Jaffer Ali S.,
The following types of analyses can be carried out:
CRM Lead Analysis
Use the InfoCube CRM Lead Management (Technical Name: 0MKTG_C01) for reporting.
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
Channel Analysis
Efficiency Reporting
Historical Evaluation
Lost Leads
Channel Management: Top-n Lost Leads (Current Year)
CRM Activities Analysis
Use the InfoCube CRM Activities (Technical Name 0CSAL_C01) for reporting.
The InfoCube for activities in CRM provides the data basis for evaluating business activities undertaken by your employees. It provides you with information about how much time is being spent on contacting the customer, whether customers actively seek out contact with your company and how intensively your employees look after your customers. It delivers data for queries such as:
Intensity of customer care
Activity History
Success/failure analysis
Customer Interaction Center (CIC)
Activate the InfoCube Interactive Scripting Evaluation (IC WinClient) 0CRM_CIC1.
Interactive Scripting Evaluation (IC WinClient)
This InfoCube provides the data base for the interactive scripting evaluation. It supplies the data to the Interaction Center (IC): Interactive Scripting Evaluation query.
Opportunities Analysis
Activate InfoCube 0CRM_C04 - Opportunities.
The CRM Opportunities InfoCube contains all the characteristics and data used for the opportunities analyses.
Sales Order Complaints Analysis
Activate InfoCube Complaints (Technical name: 0CSAL_C09).
You can carry out the complaint analysis on a daily, monthly, weekly or a quarterly basis. The analysis can be done in relation to CRM Service Organization, CRM Sales Organization, CRM Product, and Sold-To Party.
Service Qualtiy Analysis
Activate the MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints.
The MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints gets the data from the following ODS objects for analyses in various queries:
0CRM_PROI - Orders: Item Data
0CRM_COI - Controlling (Item Data)
0CRM_CNFI - Confirmations (Item Data)
0CRM_COMP - CRM Complaints (Items)
Let me know if you need further help.
Reward points if it helps.
Regards,
Naveen.

Info about tracks seems to stick even though I change it

I put an audio book onto my iPod shuffle 4th (or maybe 5th) gen. To start with the order was messed up. Both listing-wise in iTunes and playback on ipod. I then worked out how to order this particular audio book correctly (by using disk numbering, 1 of 3, 2 of 3, 3 of 3), and this got the order correct as listed in iTunes. But the incorrect ordering stuck so far as playback on the iPod went. So, just to clarify: Correct order listed in iTunes, wrong order played back on iPod.
I tried deleting all the audiobook files from the iPod and recopying them back on. Various other changes to try and get the right ordering to stick -- for playback. But no. The ordering remained messed up on playback, but looked fine in iTunes order.
What I had to do to fix this was reset the iPod back to its factory settings, then copy the correctly listed audiobook onto the iPod. Then the playback order was correct.
My question (becuase I've now got a similar but different problem): How to achieve what I achieved by resetting back to factory settings and copying files on again, without doing a factory reset? How to get info to stick, take effect, on the iPod? It seems the iPod, once it gets a version of a bunch of files, won't allow you to change that info about those files. Please help. I'm really struggling with this iPod. I can programme C and PHP etc. but I can't get my iPod to work properly. Really not happy.

where can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFW

From where i can get the info about javazoom package

From where i can get the info about javazoom package

You mean this?
http://www.javazoom.net/mp3spi/sources.html

Read info about files in specific folder into internal table

Hi Experts
I need to have last modified date and filename information read into an internal table. I need to read in the information of all files in a specific (UNIX) folder (I do not know the name of the single files).
I really hope someone can help.
Thanks a lot
Kind regards,
Torben

Hi Guys
Thanks a lot for you input.
I managed to get my program to works as follows:
REPORT ZDELETE_ARCHIVING_FILES.
*Step 1: Get the list of files in the directory into internal table :
DATA: DLIST    LIKE EPSFILI OCCURS 0 WITH HEADER LINE,
      DPATH    LIKE EPSF-EPSDIRNAM,
      MDATE    LIKE SY-DATUM,
      MTIME    LIKE SY-UZEIT.
DATA: BEGIN OF FATTR OCCURS 0,
          FILE_NAME LIKE EPSF-EPSFILNAM,
          FILE_SIZE LIKE EPSF-EPSFILSIZ,
          FILE_OWNER LIKE EPSF-EPSFILOWN,
          FILE_MODE LIKE EPSF-EPSFILMOD,
          FILE_TYPE LIKE EPSF-EPSFILTYP,
          FILE_MTIME(12),
      END OF FATTR.
DATA: P_PATH(50) TYPE C.
CONCATENATE '/ARCHIVE/' sy-sysid '/archive' INTO P_PATH.
*        WRITE: / P_PATH.
DPATH = P_PATH.
*Get files in folder - read into internal table DLIST
*if filenames are longer than 40 characters
*then use FM SUBST_GET_FILE_LIST.
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
     EXPORTING
          DIR_NAME               = DPATH
     TABLES
          DIR_LIST               = DLIST
     EXCEPTIONS
          INVALID_EPS_SUBDIR     = 1
          SAPGPARAM_FAILED       = 2
          BUILD_DIRECTORY_FAILED = 3
          NO_AUTHORIZATION       = 4
          READ_DIRECTORY_FAILED = 5
          TOO_MANY_READ_ERRORS   = 6
          EMPTY_DIRECTORY_LIST   = 7
          OTHERS                 = 8.
IF SY-SUBRC EQ 0.
*Step 2: Read the file attributes into an internal table
*Read info about the files (attributes) into the internal table FATTR
*as we need info about the last time it was changed (MTIME)
LOOP AT DLIST.
    CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
         EXPORTING
              FILE_NAME              = DLIST-NAME
              DIR_NAME               = DPATH
         IMPORTING
              FILE_SIZE              = FATTR-FILE_SIZE
              FILE_OWNER             = FATTR-FILE_OWNER
              FILE_MODE              = FATTR-FILE_MODE
              FILE_TYPE              = FATTR-FILE_TYPE
              FILE_MTIME             = FATTR-FILE_MTIME
         EXCEPTIONS
              READ_DIRECTORY_FAILED = 1
              READ_ATTRIBUTES_FAILED = 2
              OTHERS                 = 3.
    IF SY-SUBRC EQ 0.
      FATTR-FILE_NAME = DLIST-NAME.
      APPEND FATTR.
    ENDIF.
ENDLOOP.
SORT FATTR BY FILE_NAME.
DATA: time(10), date LIKE sy-datum.
DATA: months TYPE i.
DATA: e_file TYPE string.
LOOP AT FATTR.
CLEAR: time, months, e_file.
    IF FATTR-FILE_NAME(10) = 'archive_BW'.
*Convert the unix time into readable time
      PERFORM p6_to_date_time_tz(rstr0400) USING FATTR-FILE_MTIME
                                                 time
                                                 date.
*Calculate the number of months between date (MTIME) and current day
*ex 31.03.2009 - 01.04.2009 = 1 month
*ex 01.02.2009 - 01.04.2009 = 2 month
    CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
      EXPORTING
        i_datum_von = date
        i_datum_bis = sy-datum
      IMPORTING
        e_monate = months.
        CONCATENATE DPATH '/' FATTR-FILE_NAME INTO e_file.
*        WRITE: / FATTR-FILE_NAME,
*                 FATTR-FILE_SIZE,
*                 date,
*                 time,
*                 sy-datum,
*                 months,
*                 e_file.
*Step 3: Delete files where months > 1
      IF months > 1.
        OPEN dataset e_file for output in text mode encoding default.
        DELETE dataset e_file.
        CLOSE dataset e_file.
      ENDIF. "months > 1
    ENDIF.
ENDLOOP.
ENDIF.

How to get info about available Toshiba updates?

I have noticed that this has taken over from the online product information button.
I was wondering how do I know now when there is an update availabe for Toshiba specific software and hardware?

To be honest if the system runs well und stabile you don't need any updates. On my one and half year old notebook I still use original preinstalled OS (recovery image) without any Toshiba specific updates. All I have installed are Microsoft updates.
Anyway if you want to have info about available updates pick up info about TOSHIBA TEMPRO tool.

How to get info about Composition/Candidate window?

Hi All,
I'm working on an application which should be able to take multi-language input (especially chinese, japanese, and korean).
When we type something in Chinese/Japanese, there will be Composition and Candidate Window popped up. I want to know whether there is a way to get/set some attributes/info about those windows.
Specifically, I want to be able to position the Composition/Candidate Window anywhere I want...
I've tried the active client tutorial for the on-the-spot and below-the-spot input, but I still haven't find a way to get a 'handle' to the windows...
Can anyone help? Thanks in advanced :)

I do not think the individual temp file percentages is of much use. What you usually want to know is how much of the temporary tablespace is in use and how much is available.
For that I think you want to compare current total usage information that can be found in v$sort_segment against total available for usage data that can be found in dba_temp_files to get the percentage of available temporary file space that is in use.
I quickly put together the following. See if either is on any use in constructing the information you really want.
> @t20
>
> select
2    used_blocks
3   ,total_blocks
4   ,f.blocks                             as FILEBLOCKS
5   ,round(used_blocks/total_blocks * 100,1) SORTSEGPER
6   ,round(used_blocks/f.blocks * 100,1)        TEMPFILEPER
7 from
8    v$sort_segment
9   ,(select sum(t.blocks) blocks from dba_temp_files t) f
10 /
USED_BLOCKS TOTAL_BLOCKS FILEBLOCKS SORTSEGPER TEMPFILEPER
       8960       689664    1025024        1.3          .9
>
> select
2    round(used_blocks/ (select sum(blocks) from dba_temp_files) * 100,1) ||'%'
3    as TEMPFILEPER
4 from v$sort_segment
5 /
TEMPFILEPER
.9%HTH -- Mark D Powell --

Info about ASA 55xx

Similar Messages

Maybe you are looking for