Info about conditions, exceptions and celldefinitions
Hi,
Please tell me about conditions, exceptions, cell definition and structures.
can we create conditions characteristics and exceptions on characteristics.
what is the meaning of cell definitions and how it will be useful.
Thanks,
Annam
Hi,
Chk this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Regards,
Mansi
Similar Messages
-
Needed info about io devices and cpu without using prtdiag
Hi
I need to collect info about io devices and cpu. but i cannot use prtdiag.
is there any way to collect this information on solaris machine....
may any available c APIs
Thanks in advance.
Nageshyep.... prtconf -vp | grep <wot u r looking 4>
-
I cannot install my ipod to my computer. Says something about the device driver. I did not get it new either and so have no info about it. And I have never used one before and have no friends who have either. Can someone help me?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
I need manual or info about forms. I use a forms with oracle 7
over AIX.
thank in advance
gabrielAre you after any specific info releated to Forms and/or Oracle
7?
sandeep -
Need detailed info about Active,New and Change log table in BI 7.0
Dear Experts,
I am new to this technology. Can you any one explain in very detail about ACTIVE, NEW and CHANGE LOG tables workflows.
And also i am requesting you all to give tips to how to study BI 7.0
Regards,
Ameer.NFor your first problem solution is this note: 936644
You might have not mapped the filed in your tarnsfer/update rules? -
How to get info about updates' repo and versions, including AUR pkgs
I'm writing a little tool in python that checks for updates and displays notification in gnome about available updates. I'm doing this by syncing database to custom directory with:
pacman -Syb /custom/dir
and then getting list of updates with
pacman -Qub /custom/dir
I do it this way because I don't want to sync my real pacman database until I'm actually installing or updating packages. I then get current version and repo of the listed packages with:
yaourt -Q | grep "list\|of\|packages"
It's quite long and seemingly wasteful procedure, but an even bigger issue is that I don't know how to do the same thing with packages from AUR. Looking at the yaourt's man pages I see no option to sync database into a custom directory.
Any suggestions?Camus wrote:
The author of that blog post used cower instead of yaourt, but I don't think cower allows me to sync AUR database into custom dir either. Or am I missing something? I don't how yaourt and cower sync AUR database anyway.
I actually already wrote such notifier for gnome in bash. But I want to display more info and I want to include AUR packages.
The perfect tool in my situation would be something that allows me to sync official and AUR databases into custom dir and then displays list of updates with:
-name of package
-current version
-updated version
-repo
I can currently do all of the above, but just with official repos and not as elegantly as I want.
Not sure what you mean by 'sync AUR database' (no such thing exists as it does for the binary repos), but cower will let you download to wherever you want. -
Info about Time, GIS and other usable XML(DB) Services
Based on Re: how to retrive World Server time in Sql here some thoughts about "TimeService the XMLDB Way".
This post for all who are in need of such a solution. If I have time I will also post the proper XMLTABLE alternative.
Probably there are better ways - Does anyone know better / useful web services? (that can be used with or called from XMLDB).
Cool XMLDB examples that can be used by others are appreciated.
...while thinking about it I would do it for instance via HTTPURITYPE (also based on UTL_HTP btw).
In "steps" (based on XMLDB functionality and http://www.nanonull.com/TimeService/TimeService.asmx)
SQL> set long 1000000
SQL> set pages 50000
SQL> select httpuritype('http://www.nanonull.com/TimeService/TimeService.asmx/getTimeZoneTime?timezone=CET').getClob()
2 from dual;
HTTPURITYPE('HTTP://WWW.NANONULL.COM/TIMESERVICE/TIMESERVICE.ASMX/GETTIMEZONETIM
<?xml version="1.0" encoding="utf-8"?>
<string xmlns="http://www.Nanonull.com/TimeService/">5:54 PM</string>
SQL> select extract(xmltype(httpuritype('http://www.nanonull.com/TimeService/TimeService.asmx/getTimeZoneTime?timezone=CET').getCLOB())
2 ,'/*','xmlns="http://www.Nanonull.com/TimeService/"')
3 as "CET Time"
4 from dual;
CET Time
<string xmlns="http://www.Nanonull.com/TimeService/">6:00 PM</string>
SQL> select extractvalue(xmltype(httpuritype('http://www.nanonull.com/TimeService/TimeService.asmx/getTimeZoneTime?timezone=CET').getCLOB())
2 ,'/string','xmlns="http://www.Nanonull.com/TimeService/"')
3 as "CET TIME"
4 from dual;
CET TIME
6:01 PM
SQL> create table M as
2 select extractvalue(xmltype(httpuritype('http://www.nanonull.com/TimeService/TimeService.asmx/getTimeZoneTime?timezone=CET').getCLOB())
3 ,'/string','xmlns="http://www.Nanonull.com/TimeService/"')
4 as "CETTIME"
5 from dual;
Table created.
SQL> desc M
Name Null? Type
CETTIME VARCHAR2(4000)The "Time" in London (one of the strings that worked... LOV for the city's would be useful...?)
SQL> select extractvalue(xmltype(httpuritype('http://www.nanonull.com/TimeService/TimeService.asmx/getCityTime?city=London').getCLOB())
2 ,'/string','xmlns="http://www.Nanonull.com/TimeService/"')
3 as "The Time in London"
4 from dual;
The Time in London
5:09 PMXML Schema: http://www.hostip.info/api/hostip-1.0.0.xsd
SQL> SELECT *
2 FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL>
SQL> col Name FOR a20
SQL> col CountryName FOR a20
SQL> col CountryAbbrev FOR a20
SQL> col Coordinates FOR a20
SQL>
SQL>
SQL> SELECT extractvalue(value(t),'/Hostip/gml:name'
2 , 'xmlns:gml="http://www.opengis.net/gml"
3 xmlns="http://www.hostip.info/api"') AS "Name"
4 , extractvalue(value(t),'/Hostip/countryName'
5 , 'xmlns:gml="http://www.opengis.net/gml"
6 xmlns="http://www.hostip.info/api"') AS "CountryName"
7 , extractvalue(value(t),'/Hostip/countryAbbrev'
8 , 'xmlns:gml="http://www.opengis.net/gml"
9 xmlns="http://www.hostip.info/api"') AS "CountryAbbrev"
10 , extractvalue(value(t),'/Hostip/ipLocation/gml:PointProperty/gml:Point/gml:coordinates'
11 , 'xmlns:gml="http://www.opengis.net/gml"
12 xmlns="http://www.hostip.info/api"') AS "Coordinates"
13 FROM TABLE (XMLSEQUENCE (EXTRACT (HTTPURITYPE ('http://api.hostip.info/?ip=141.146.8.66').getxml ()
14 , '/HostipLookupResultSet/gml:featureMember/Hostip'
15 , 'xmlns:gml="http://www.opengis.net/gml"
16 xmlns="http://www.hostip.info/api"' ))) t
17 /
Name CountryName CountryAbbrev Coordinates
Redwood City, CA UNITED STATES US -122.206,37.5164
1 row selected. -
Any info about ADF WebServices and pass data from one VO to another VO?
Hi, i need to do a webservice for synchronize two tables in two db... there are any info, articles, tutorials or examples about this? preferably the part of data copying between VO...
Thanks in advance.I'm not exactly sure what you are trying to do and why would you need a Web service for this - but it seems like having an AM service method is what you should be using.
Read more here:
http://docs.oracle.com/cd/E26098_01/web.1112/e16182/bcservices.htm#sm0206
http://docs.oracle.com/cd/E26098_01/web.1112/e16182/bcservices.htm#sm0212
Demo:
https://blogs.oracle.com/shay/entry/am_service_method_-simpledem -
Need info about Serena Collage and Netweaver 04 WEBAS
Is anyone using SERENA Collage with Netweaver Web Application server? I have some deployment questions. Any assistance is appreciated.
Hi Ravikumar
you can check the following whitepaper
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eac9cf35-0801-0010-918b-ab231eba0bd0
and the verify the following
http://help.sap.com/saphelp_nwce10/helpdata/en/45/51b5d88a853bdce10000000a1553f7/content.htm
if it helpful reward points are appreciated -
Need info about HDD adaptor and Vista utilities installation on Equium A110
I own an Equium A110-233 (PSAB2E), and I recently upgraded to Vista after installing 2GB of RAM. However, I found myself a little short of hard drive space and treated myself to a new 120GB HDD. However, it seems that the computer has an edge connector interface, as does the existing Hitachi TravelStar HDD - it doesn't look like there's an adaptor plug on the drive. Does anyone know where I can get an adaptor for my "traditional" 40-pin hard drive?
After installing Vista and reflashing my BIOS, I reiinstalled ConfigFree and the Value Added Package (amongst other drivers). However, running ConfigFree always leads to a crash with the BSOD ID "NO_MORE_IRC_STACK_LOCATIONS".
As for the VAP, I wanted it mainly for Power Saver. However, searching for it gives only "Power Saver Help".
Can anyone give me any pointers here? Thanks.Hi,
did you know that you have a serial-ata drive in your machine which is not compatible to the IDE standard (40 pin)? You wont get an adaptor from 40 pin to serial ATA, because SATA is a completely different technology to IDE.
You will have to return the harddrive you purchased and buy a serial-ata drive, which will fit in your machine.
A little idea from my side regarding your BSOD:
Download the powersaver and the configfree for vista from the internet (this is a good address: http://209.167.114.38/support/Download/ln_byModel.asp) and reistall that stuff, maybe it helps.
Greets -
Info about setting enable and username secret lev.5 passwords
Hi,
it's the first time I write on this forum, so I hope it's the right section for my question... I need to replace the enable and username XXX level 7 passwords (defined with enable password PPP and username xxx password PPP commands) on a lot of devices and I'll do it through an automated script that will send commands to these devices.. Since I would avoid to send the password in cleartext with enable secret PPP or username xxx secret PPP, I'd like to execute the commands on a test router and then directly send the level 5 encrypted password to the other routers (i.e. enable secret 5 hash-of-PPP and username xxx secret 5 hash-of-PPP). Since I know that the hashed value contains a salt that is used in some way to compute the hash value of a password, I wonder if a given level 5 enable or username password can work on all the IOS versions and router models that we have.. have you ever experienced some problems regarding the copy-and-paste of already-encrypted passwords?
I know that this could lead to problems with level 7 passwords used for radius authentications (one of my colleagues experienced problems after a copy-and-paste of a password that did not work until he re-wrote the authentication command with the clear-text password, forcing the router to compute the level 7 password by itself), but I don't know if it was a bug of IOS and maybe only related to level 7 passwords..
Thank you in advance for any help.
GianniHi,
it's the first time I write on this forum, so I hope it's the right section for my question... I need to replace the enable and username XXX level 7 passwords (defined with enable password PPP and username xxx password PPP commands) on a lot of devices and I'll do it through an automated script that will send commands to these devices.. Since I would avoid to send the password in cleartext with enable secret PPP or username xxx secret PPP, I'd like to execute the commands on a test router and then directly send the level 5 encrypted password to the other routers (i.e. enable secret 5 hash-of-PPP and username xxx secret 5 hash-of-PPP). Since I know that the hashed value contains a salt that is used in some way to compute the hash value of a password, I wonder if a given level 5 enable or username password can work on all the IOS versions and router models that we have.. have you ever experienced some problems regarding the copy-and-paste of already-encrypted passwords?
I know that this could lead to problems with level 7 passwords used for radius authentications (one of my colleagues experienced problems after a copy-and-paste of a password that did not work until he re-wrote the authentication command with the clear-text password, forcing the router to compute the level 7 password by itself), but I don't know if it was a bug of IOS and maybe only related to level 7 passwords..
Thank you in advance for any help.
Gianni -
good day i live in uae i need prices of iphone 4s and 5 all availabe gb and made off and delivery process pls can you help me ?
Without a confirmed address and credit card from the UK, you can not order from the UK store. Apple will not ship out of country.
-
Info about business rules and views
I need to enforce some business rules on a view.
Are triggers my only option ?From Oracle documentation:
[http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_8004.htm]
WITH CHECK OPTION Specify WITH CHECK OPTION to indicate that Oracle Database prohibits any changes to the table or view that would produce rows that are not included in the subquery. When used in the subquery of a DML statement, you can specify this clause in a subquery in the FROM clause but not in subquery in the WHERE clause.
[...] -
Info about deleted request ( log )
Hi experts,
i deleted the request over cube. I received info about request-id and "request number" in log.
Can i obtain more info about this request, which was deleted ( e.g. InfoSource, DataSource) in any SAP table ?
Thanks in advance
MartinHi Martin,
Use transaction :SLG1
enter the Object * , sub obj -* and enter the From and to Date/Time -- execute
you can get the complete details.
Check the table :RSREQICODS_SAVE(Requests Deleted from Administration Stored Here)
Regards
KP
Edited by: prashanthk on Dec 9, 2010 3:06 PM -
Conditional indicators and data buffers
Hi,
when I was reading help on VI memory usage http://zone.ni.com/reference/en-XX/help/371361G-01/lvconcepts/vi_memory_usage/, I did not completely understand the part about Conditional indicators and data buffers.
Could someone provide one or two examples of it?
Thanks,
Andrej
Solved!
Go to Solution.Hi Jeff,
Sorry that I still couldn't understand the Conditional indicators and data buffers.
I tried checking the code provided by you using "Show Buffer Allocation" in LV2012. I can see that both the code allocates same number of bufferes. i.e., the one which has Conditional indicator also created a buffer as below (Notice black square dot in Add function). If conditional indicator does create additional buffers as you explained in previous post, why equal number of buffer is created in non-conditional indicators also? Can you please explain this?
Thanks,
Ajay.
Attachments:
Conditional Indiator.png 34 KB
Maybe you are looking for
-
I keep getting this message and saying "Lightroom will attempt to fix this problem the next time it launches." but never fixed --unisntalled a couple of times and then re-installed but sam issues. this is very aggravating to pay for a product an
-
AppleWorks Icon does not stay in the same position after saving
After I installed AppleWorks 6.2.8, each time I save the file (word prosessor or data base) the icon on the desktop always moves to the right side of the screen below the hard drive icons. If I drag it to different position, then save the file it wil
-
Error Starting Coherence 3.6.1 packed in War File From Tomcat 6.0.26
Hi All, I have been receiving the following error when trying to startup coherence from within a War file: INFO: Deploying configuration descriptor services#test#processor#v1.xml java.net.MalformedURLException: no !/ in spec at java.net.URL.<ini
-
Why is dataacq.h missing from my installed version of CVI 5.5?
I need the header file dataacq.h for some applications that I am using. I know the file is present on other versions of CVI 5.5 and want to know why the file was not installed (using standard install) on my system (Windows 98)
-
Visio Web Part - Problems Loading and Displaying Multiple Sheets
I am having two issues with the VISIO SharePoint web part: 1) most of the time the server times out and returns "...unable to retrieve data... 2) When it does load, it only displays 1 or 2 sheets from visio file I don't currently have access to the b