Info about implementation in Poland in energy sector
Hello,
we have information about some bad project in Poland where SAP caused 30% less power production in next year after go-live.
Sorry but do not have any more information. Is there any additional information that I can find?
TIA
Gordan
Hello,
I am looking is there any article about this implementation in Poland.
TIA
Gordan
Similar Messages
-
From which Table we can find info about implemented applications of SCM
Hi All,
is there any table which is storing the information about the implemented apllications in SCM, Please help me to finding out this table.
Thanks in Advance
MaheshHi,
Tables required may be starts from
Customizing
Basic Data/Administartion
Master data
Characteristics
FI/CO
SD
MM
WM
QM
PP
PS
HR
Just to list up the tables, lemme know which particular module tables u require so that I can paste the same.
Regards,
Krishna -
Need deeper info about RPC paradigm
Having scoured the Web for info about RPC, I find the same few discussions repeated widely, but certain things left unexplored. I therefore have particular questions that remain unanswered.
1) RPC server behavior appears predicated around "connect-call-disconnect, connect-call-disconnect, ..." behavior on the part of the RPC client; that is, a connect-and-disconnect around every remote procedure call. I, on the other hand, need my clients to implement "connect-wait-call-wait-call-wait-call-...-disconnect" behavior; that is, to connect, REMAIN connected for an extended period of time across multiple procedure calls, and disconnect only when the client is ready to terminate all use of the server. It appears that svc_run() supports this, but I want to avoid surprises; is there any restriction on this usage of svc_run()? Can this paradigm be supported by appropriate use of the RPC library routines available for replacing svc_run() with my own code?
2) The only "documentation" I have been able to find about how to write actual RPC programs dates back to 1992 and does not come from Sun. Virtually all of the routines appearing in its example programs are designated "obsolete" or "for backward compatibility" in their manpages on Solaris 8. Can you recommend/point to an instructional text that describes RPC programming as it would be done with "today's" interface?
3) Probably the largest single obstacle to my organization's possible use of RPC in "real," critical applications, is RPC's continuing C-specificity. We write all our applications in C++, and mostly object-oriented C++ at that -- whereas RPC appears not to have advanced beyond the "C with global variables" architecture (with one possible exception, following). Code generated by RPCGEN (without the -C switch, I admit; I haven't gotten that far in my trial-and-error experiments, yet) requires extensive hand-editing in order to compile C++ code that uses it, or link successfully with compiled C++ code. This obstacle is severe enough to potentially render RPC an unacceptable solution for us.
The possible exception I mentioned is that I found a webpage that discussed something called 'rpcc,' which appeared to be an object-oriented, C++ implementation of RPC. The page said this was available "on Sun machines," but I don't find it on MY Sun machines. Other searches do not turn up other references. Such a thing would be a godsend if it existed, and it would seem not to be so difficult for Sun's professional developers to create. So does it exist? If so, how can I get my hands on it?
4) Different sources contradict each other as to the "semantics" of an RPC procedure call. Sun's ONC manual says flat-out that Sun RPC provides only "at least once" semantics -- but then, the manual takes the approach that one is using RPC in a "transport-independent" manner. Other references discuss the issue at greater length (hint, hint) and imply that any RPC implementation can provide "exactly once" semantics, providing that one specifically force it to use "a reliable transport such as TCP." It is not clear how much to infer, or disregard, in Sun's simple statement. I need to know FOR SURE whether Sun RPC can be made, forced, tricked, etc. into providing "exactly once" semantics. If so, is "use of TCP" sufficient? Or are other tricks needed? Please outline the necessary steps that might be needed in addition to using TCP.
5) (Related to 4. Sun documentation contains language to the effect that Sun RPC provides "at least once" semantics because providing "exactly once" semantics "would be too difficult." However, a graduate student (at Syracuse U if I recall correctly) posts a research paper in which he describes an RPC facility, developed from scratch, that provides "exactly once" semantics. Apparently it's not THAT difficult, after all. The fact that it's "too difficult" for Sun does not exactly flatter the company. They may want to revisit this, and provide yet another RPC interface (in C++ while they're at it). I won't even charge a finder's fee. ;-) )
Thanks in advance,
ChrisI agree fully.
None of the example code applies to todays
"real-world" applications. Im trying to implement
multithreaded RPC on Solaris using rpcgen's -N
"NewStyle", -A "Auto multithreaded" and -C "ANSI C"
options but none of the examples anywhere show how to
do this. Is their a better technology that everyone
is using now that does a similar thing?I have an example that might help. It's a multi-threaded
NIS server that's been running in production for several
years. There are a few tricks in the source that might help.
You can download the source with anonymous FTP at
ftp.cc.umanitoba.ca. Look in the `src' directory for
midas.tar.Z. -
Hi,
I have to work on RFC FM. Can any body give me the info about the RFC? especially for Function module?
Will give Reward points
regards,RamHi
RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
and you will be passing an Import parameter DESTINATION to it.
Other code and usage will be similar to any fun module;
Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
Refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm
Function Modules doc
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Reward points for useful Answers
Regards
Anji -
Info about report to rebuild MVER table
Dear guru ,
Can you give me info about report ZMVERBRP that rebuild historical consumptions ?
Oss note 804011 describe that I can use note 791728.
But this note doesnu2019t exist.
Can you help me ?
ThanksThe implementation is free of charge from SAP's perspective as you apply the note. Please make sure that you actually read the code and adapt to your needs if needed.
The note exists but only as a pilot release and and customers will be added only if they really want the reports. SAP does not officially support it. I know it from first hand, I'm the one who releases it to the customers
Cheers,
Attila -
hello,
i want info about internationlizaion...............that means how should i implement on jsp platform........is it suitable for larger applicaion................hi,
study ResourseBundle & Locale classes, it will help to create internationalization concepts,
& refer MVC
some useful links
http://java.sun.com/docs/books/tutorial/i18n/index.html
or
http://www.answers.com/topic/javaserver-pages?cat=technology -
Pls give some info about userexit
hi everyone,
i never did work on userexit before. Could you give some info about how to create userexit and some knowledge related to that. Any suggestion is appreciated.
Best Regards,
JulianUser exits (Function module exits) are exits developed by SAP.
The exit is implementerd as a call to a functionmodule.
The code for the function module is writeen by the developer.
You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
CUSTOMER EXITS-> t-code CMOD.
As of Release 4.6A SAP provides a new enhancement technique, the Business Add-Ins.
Among others, this enhancement technique has the advantage of
being based on a multi-level system landscape (SAP, country versions, IS solutions, partner,
customer, and so on)
instead of a two-level landscape (SAP, customer) as with the customer exits.
You can create definitions and implementations of business add-ins at any level of the system landscape.
You can use below code to find out user exits associated with particular transaction.
*& Report ZUSEREXIT *
*& Finding the user-exits of a SAP transaction code *
*& Enter the transaction code in which you are looking for the *
*& user-exit and it will list you the list of user-exits in the *
*& transaction code. Also a drill down is possible which will help you *
*& to branch to SMOD. *
REPORT zuserexit NO STANDARD PAGE HEADING.
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
*---End of Program.
I hope it gives some basic idea.
Best Regards,
Vibha
*Please mark all the helpful answers -
Need some info about current market on SAP HANA
Hello all,
Iam ajay. I have 2 years experience on java and i learned SAP ABAP and want to learn SAP HANA. I I have some doubts regarding current market on SAP HANA and how people are using HANA now. I have searched a lot in google and contacted many people but i didn't get the good answer. I hope this post provide me the required info. Thanks in advance.
Can somebody please give some info. about the following.
What exactly does the following mean and what is the future of these areas?
BWI with HANA
BODS with HANA
HANA modelling and implementation.
HANA Migrations.
SAP UI5 with HANA.
please spare some of your valuable time and help me on this.
Thanks,
Ajay.Hi
I agree its a common HD webcam with a resolution of 1Mpix.
You can record the video in Mpeg format and the pictures would be taken in format: 160x120, 176x144, 320x240, 352x288, 640x480, 1280x720, 1280x800 -
Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...
You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534 -
HT5085 Gathering Info About your iTunes Library - Keep getting Network error
I bought iTunes Match yesterday, and so far have not been able to use it.
It gets to Stage 1: Gathering Info About Your iTunes Library and makes progress, but right at the end an error box appears saying:
"We could not complete your iTunes request. The network connection was reset.
Make sure your network connection is active and try again"
Well I know the network connection is active as I was able to be charged for iTunes Match and have had no problems making other purchases. I went to Advance > Run Diagnostics Tests from Help in iTunes and ran the Network Connectivity Diagnostics and it reported no problems.
Now I know how much Apple hate giving back refunds, but if people can't help, does anyone know how I can get my money back? If I click "Report a Problem" it simply takes me to the help pages. I tried contacting support but I received an email saying they can't help.
I'm getting quite frustrated now, so I'm reaching out and hoping someone can help me?
I've copied the diagnostic results below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.6.1.7
QuickTime 7.7.2
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 003CA7C40B1E98E0
Current user is not an administrator.
The current local date and time is 2012-05-18 20:20:20.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: bb5c046694c1f4c590202360da9f2bc5
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {444AF521-4D63-434F-AC33-8F05DA9C6C64}
Description: Microsoft Virtual WiFi Miniport Adapter #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {4F46CBF3-C53C-4615-AF14-B46B9785D100}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {6D3CAB28-0C0B-4701-A440-B1A90BE75551}
Description: Dell Wireless 5540 HSPA Mini-Card Network Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {8C130DAB-E810-4FA6-8946-1600FFE0DB2F}
Description: Intel(R) WiFi Link 1000 BGN
IP Address: 192.168.1.69
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Fri May 18 20:01:40 2012
Lease Expires: Sat May 19 20:01:40 2012
DNS Servers: 192.168.1.254
Adapter Name: {B32D9395-8937-42EC-BC5F-352D07958EDF}
Description: Realtek PCIe GBE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-18 20:14:07.@ deggie, I wasn't threatening ANYONE. I was simply saying how frustrating this has become, seeing how I have been trying on my own to figure this issue out for more then a month with no results. Like I said in the beginning, I have not used any other account to purchase apps or other products on my phone. I have only ever used one account. There are 23 apps that are saying they can't sync. It directs me to authorize the computer, which I do but it doesn't change the outcome. If I proceed, I lose those 23 apps correct? Do I also lose all my text messages saved, and other things such as documents in the "notes"?
-
Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)
You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.
-
ITunes and Finder - how are info about audio files refreshed?
I am now in the process of embedding artwork in my mp3-files using CoverScout. I have also updated info about all my tracks in the iTunes after embedding the artowrk, by selecting all the files and clicking GeitInfo and clicking OK (without making any changes). All albums are displayed correctly with new artworks. This, however, is not the case with the Finder.
Generally, if a mp3-file has (embedded) artwork then the file would be displayed as a thumbnail of the artwork in question. The thing is that the icons for the mp3-files that were recently embedded with artworks are displayed as lacking artwork (they are displayed with the simple iTunes icon). Moreover, the Preview of GetInfo window does not show that the mp3-files contain the embedded artwork. The files are not refreshed. However, if I copy or duplicate those files then the copied files are displayed correctly, with the right getinfo. This, however, does not work if moving files. The files are not refreshed when moved, only when copying or duplicating.
I find it curious that Finder does not refresh the files, even after restarting the Mac, given the fact that iTunes have the information that there is artwork. Is there a way to refresh the files in the finder without copying or duplicating the files?
Another curious thing with albums containing tracks with embedded artwork is as follows: the Finder displays some of the tracks as thumbnails of the artwork in question, but not with all the files. The same goes for the Preview of the files in GetInfo. Some have the correct Preview displaying the artwork, but some lack the info about the artwork in the Preview. Why are not all files displayed as having embedded artwork, but only some, given the fact that they belong to the same album and the artwork was embedded in the same way?
The same goes when I embed the artwork without CoverScout, by updating multiple files through iTunes (dragging the artwork to the Artwork-field in Info). The Finder does not display that the files are embedded. I must copy or duplicate these files in order to refresh the info.
A more general question: how do I refresh files in the Finder? There is no refresh button, as in the Windows.
I would appreciate your help.
Kind regards
AlexI was wrong about one thing concerning refreshing the files. I said that restarting the Mac would not refresh the files. However, if the iTunes have info about album's/tracks artwork then the Finder will also have this info after rebooting the system. My question is whether the Finder can be refreshed, without rebooting (restarting)?
-
Need info about programming with InCopy
Hi,
I have a client who has stored thousands of InCopy documents with valid styles applied to segments of it.
Now my requirement is to create a template which has XML tag -> Style mapping.
Considering that template, I am suppose to open all the InCopy documents, apply that Tag -> Style mapping to it and then convert all of them to XML and persist the data in DB.
Is there a programmatic way as to apply XML tags to a document based on the styles used?
Please educate. I am a complete newbie to InCopy - so please bare with my questions,
Thank you, Appreciate your help.
Regards,
ChintanYou could download and deploy "struts-example.war" from apache website.
[That Struts 1.0.2 I think.]
---Nam
Jordy wrote:
> I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
And God said
Let there be numbers
And there were numbers.
Odd and even created he them,
He said to them be fruitful and multiply,
And he commanded them to keep the laws of induction.
[Bill Taylor [email protected]]
[nam_nguyen.vcf]
-
Need info about RH Server 6 and reports
I'm interisted in RH Server 6 but I'm unable to locate much
practical info about it on the Web site, and a call to sales didn't
help. I need to know what I'm getting us into before I contribute
our $2,000. Can anyone provide this information or point me to its
location on the site:
--I have system requirements from the Adobe site, but what is
the "server" and what does installation and setup entail? About how
how long does it take, or how difficult, to achieve operability?
--According to a piece by John Daigle, the server component
should be installed on a Windows server running IIS 5+. Is IIS a
separate software or standart part of Windows server? If separate,
what preparation should that server have before the installation in
addition to installation of IIS?
--I know nothing about security/firewall protocols. We will
have our own and our customer firewalls to navigate. Are the server
setup instructions adequate for setting all that up? Or are
purchasers expected to have sys admins knowledgeable to set that
up? Is that applied to the RH server or the Windows server? if RH
server, how can I get a copy of instructions for my system people
to review?
--Have users found the RH server/RoboEngine reliable, once
it's operable?
--Is it true that the usage reports aren't customizable? Can
additional usage data be specified in the RH server?
--These report summaries are vague--Areas Requiing Help,
Frequently Viewed Content--stating only that repoorts show the
suchandsuch done "most frequently" or "most often." Does that mean
the top 3, 5, 10 or what? Is there a way to track all of that
activity from most to least?
--The summaries of the reports Unanswered Questions and
Frequently Asked Questions say that terms entered in the Search
field are identified. Questions and terms aren't the same in my
book--am I right that it captures anything entered? Can it do the
same for the Index field?
--I saw no RH server under downloads, or maybe missed it.
Correct in guessing that a demo version is not available?
--Is RH server user doc available on the web site? I found
the Getting Started gude, which isn't much use in evaluating the
product.
I have additional questions, but if you can answer these
questions or direct me to answers some of those may be covered.
Thanks,
Mike
Access database.Hey, Mike!
I found a few things for you. I'm in a hurry, so I'll list
them quickly.
For the Trial, go to the Adobe downloads page
http://www.adobe.com/downloads/
Then select RoboHelp Server 6 from the dropdown list. You
will be asked to register (free) if you haven't already. When you
arrive at the download page make sure you note the Trial Serial #
To make it easier for you, its:
1336-1033-2628-5062-0993-4570
You can also find a RoboHelp Server 6 Getting Started Guide
here
http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
You were asking about IIS. Yes. As Colum says, this comes
with virtually any version of Windows Server (or Windows XP
Professional). However, you must install and configure it. I am not
an IT or web administrator so it took me a while to learn, but
amazingly I got it to work if you're patient and follow the steps.
(I'm speaking of both IIS and Robohelp Server) Clearly IIS
configuration is not a trivial thing and it is assumed that an
author would have help and cooperation from the IT or Web Admin
folks.
As for customizing reports. At present, the existing reports
are the only ones offered. Since these reports are generated from a
database (Access, SQL Server or Oracle) I would think (haven't done
it myself) that someone familiar with database adminstration could
open the DB (after a backup that is) and be more creative with
generating customized reports.
You are right that the "Question" does in fact mean any
search term or phrase that an end user puts in the search field.
This is the string that is stored and reported as a question. In
discussing this with the Adobe team at STC last month, they agreed
that this was definitely a holdover from the legacy software and is
due for a change sometime in the future.
To answer your other question, text entered in the Index
field is not stored in the database, only the search term field.
Since taking on the old legacy product from eHelp and
Macromedia, Adobe is focusing most of its attention on beefing up
the client authoring app for the next version (Adobe RoboHelp 7).
My assumption is that they are keen on improving the RoboHelp
Server as well. I have passed along many feature requests along the
lines you seem to suggest and hopefully the server will evolve
along with the client app.
Even with its limitations, my clients tell me RoboHelp Server
provides very useful feedback to help them improve their knowledge
base content to make it more helpful and responsive to users needs.
They also like the searchability of PDF, Word, PPT and Excel as
well...something which plain WebHelp without the RoboHelp Server
does not do.
I probably didn't get to everything, but hope this helps.
John -
Need Info about BW CRM Analytics
Hi all,
Guys,
Please help me out...
I need Info about BW with CRM Analytics
What are the core areas where data's are extracted for CRM to BW
What will be the Interview question related to BW CRM Analytics
If possible if u have any docs kindly email me at [email protected]
Thanks in Advance.
Jaffer Ali.SDear Jaffer Ali S.,
The following types of analyses can be carried out:
<b>CRM Lead Analysis</b>
Use the InfoCube CRM Lead Management (Technical Name: 0MKTG_C01) for reporting.
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
Channel Analysis
Efficiency Reporting
Historical Evaluation
Lost Leads
Channel Management: Top-n Lost Leads (Current Year)
<b>CRM Activities Analysis</b>
Use the InfoCube CRM Activities (Technical Name 0CSAL_C01) for reporting.
The InfoCube for activities in CRM provides the data basis for evaluating business activities undertaken by your employees. It provides you with information about how much time is being spent on contacting the customer, whether customers actively seek out contact with your company and how intensively your employees look after your customers. It delivers data for queries such as:
Intensity of customer care
Activity History
Success/failure analysis
<b>Customer Interaction Center (CIC)</b>
Activate the InfoCube Interactive Scripting Evaluation (IC WinClient) 0CRM_CIC1.
Interactive Scripting Evaluation (IC WinClient)
This InfoCube provides the data base for the interactive scripting evaluation. It supplies the data to the Interaction Center (IC): Interactive Scripting Evaluation query.
<b>Opportunities Analysis</b>
Activate InfoCube 0CRM_C04 - Opportunities.
The CRM Opportunities InfoCube contains all the characteristics and data used for the opportunities analyses.
<b>Sales Order Complaints Analysis</b>
Activate InfoCube Complaints (Technical name: 0CSAL_C09).
You can carry out the complaint analysis on a daily, monthly, weekly or a quarterly basis. The analysis can be done in relation to CRM Service Organization, CRM Sales Organization, CRM Product, and Sold-To Party.
<b>Service Qualtiy Analysis</b>
Activate the MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints.
The MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints gets the data from the following ODS objects for analyses in various queries:
0CRM_PROI - Orders: Item Data
0CRM_COI - Controlling (Item Data)
0CRM_CNFI - Confirmations (Item Data)
0CRM_COMP - CRM Complaints (Items)
Let me know if you need further help.
Reward points if it helps.
Regards,
Naveen.
Maybe you are looking for
-
GR and GR Non Val indicator in R/3 PO for multiple account assigned SC's
Hi, We are on SRM 3.0(EBP 4.0) and R/3 4.7. We have implemented the BBP_CREATE_PO_BACK badi for setting or clearing the GR and IR indicators under certian conditions. But for Multiple account assigned SC's we get an error message "06181 With non-valu
-
We are in need of a Technical Lead for an exciting new opportunity in Southern California. If you are interested or know someone who may be interested and would like more information please contact Dante Vasquez at: 949/448-8701 or via e-mail at [ema
-
JavaBean Models, Command Bean and J2EE Design Pattern
Hello, I have read the available "How To", Using EJBs in Web Dynpro Applications where the author mentions that one should use a Command Bean (according to J2EE Design Patterns) so that one can invoke business methods in a Session Bean from our Web
-
Is there a way to download your iPod to a New MacBook?
I am wanting to put my iTunes library on my MacBook. Is there a way to download my iPod to my MacBook? Thanks
-
Input Search criteria gets cleared on searching in Search Region
In a pageA I have a search region, this search region has 2 date fields. I have a return link on pageA that directs to pageB. Another button on pageB directs to pageA. For every page redirection, we have retainAM='Y', due to this the search criterial