Info About Mac OS X Needed
My understanding is that OS X is a 64-bit program. Right? If so, then does it run 32-bit programs in an emulation mode as does 64-bit Windows. What 64-bit programs are available for OS X? I know that the iLife programs that will come with Snow Leopard will be 64-bit.
The first understanding is that 64-bit Windows doesn't use "emulation" to run 32-bit code. The Intel and AMD 64-bit processors are full x86 (32-bit) processors, with 64-bit bolted on. Windows x64 is a 64-bit OS. When Windows x64 wants to run a 32-bit app, it simply sets up a 32-bit environment and shoves the 32-bit app into the x86 part of the CPU. The app runs, at native hardware speed, as if it was running on a regular 32-bit processor of the same speed.
That said, OS X 10.5 "basically" works in reverse. OS X 10.5 runs as 32-bit, but when an app wants to run as x64 (64-bit) OS X has a 64-bit framework set up in the x64 space and throws the 64-bit app in it. This is of course a very primitive explanation, and is just meant to give a general idea of what's going on. Snow Leopard (OS X 10.6) will be much more 64-bit.
Similar Messages
-
The most important piece of info about an update I need is how much data does it require. I am travelling and using prepaid data. I cannot even consider an update until I know how much data it will use. Please provide this information.
http://www.apple.com/feedback/macosx.html
-
I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model. I would like to unlock it and use in my country. How can I get it unlocked so the I can use my local micro sim card? What info about it do you need to assist me in unlocking it?
Sounds like you bought an AT&T no contract phone. You will need to contact AT&T for unlocking but they are only doing so for current and previous account holders. If you have never had service with them they will not unlock your phone.
-
I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model. I would like to unlock it and use in my country. How can I get it unlocked so the I can use my local micro sim card? What info about it do you need to assist me in unlocking it?
Contact the original cellular provider, as they are the only ones that can provide unlocking.
-
Where to learn in-depth info about macs?
Hey everyone. I'm not only new to the Apple support community but also I'm new to macbooks in general. I'm having a difficult time wording this question correctly as I don't want to confuse anyone.
I care to learn more than the basic functions of a mac. I want to learn the in and outs and everything in between. If someone could help guide me in the right direction, that would be fantastic.
I realize this isn't much of a technical issue but I felt that if anyone could direct me, it would be someone from here.Might not be in depth but will give you a basic idea on Macs.
http://www.apple.com/support/mac101/ -
Hi
How do I download all my photos onto an external hard drive intact without loosing iPhoto's features, important info and details? I need to delete pictures and files to make room in My mac's memory which is currently full.
MaroSo you want to move the iPhoto Library?
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
Need info about RH Server 6 and reports
I'm interisted in RH Server 6 but I'm unable to locate much
practical info about it on the Web site, and a call to sales didn't
help. I need to know what I'm getting us into before I contribute
our $2,000. Can anyone provide this information or point me to its
location on the site:
--I have system requirements from the Adobe site, but what is
the "server" and what does installation and setup entail? About how
how long does it take, or how difficult, to achieve operability?
--According to a piece by John Daigle, the server component
should be installed on a Windows server running IIS 5+. Is IIS a
separate software or standart part of Windows server? If separate,
what preparation should that server have before the installation in
addition to installation of IIS?
--I know nothing about security/firewall protocols. We will
have our own and our customer firewalls to navigate. Are the server
setup instructions adequate for setting all that up? Or are
purchasers expected to have sys admins knowledgeable to set that
up? Is that applied to the RH server or the Windows server? if RH
server, how can I get a copy of instructions for my system people
to review?
--Have users found the RH server/RoboEngine reliable, once
it's operable?
--Is it true that the usage reports aren't customizable? Can
additional usage data be specified in the RH server?
--These report summaries are vague--Areas Requiing Help,
Frequently Viewed Content--stating only that repoorts show the
suchandsuch done "most frequently" or "most often." Does that mean
the top 3, 5, 10 or what? Is there a way to track all of that
activity from most to least?
--The summaries of the reports Unanswered Questions and
Frequently Asked Questions say that terms entered in the Search
field are identified. Questions and terms aren't the same in my
book--am I right that it captures anything entered? Can it do the
same for the Index field?
--I saw no RH server under downloads, or maybe missed it.
Correct in guessing that a demo version is not available?
--Is RH server user doc available on the web site? I found
the Getting Started gude, which isn't much use in evaluating the
product.
I have additional questions, but if you can answer these
questions or direct me to answers some of those may be covered.
Thanks,
Mike
Access database.Hey, Mike!
I found a few things for you. I'm in a hurry, so I'll list
them quickly.
For the Trial, go to the Adobe downloads page
http://www.adobe.com/downloads/
Then select RoboHelp Server 6 from the dropdown list. You
will be asked to register (free) if you haven't already. When you
arrive at the download page make sure you note the Trial Serial #
To make it easier for you, its:
1336-1033-2628-5062-0993-4570
You can also find a RoboHelp Server 6 Getting Started Guide
here
http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
You were asking about IIS. Yes. As Colum says, this comes
with virtually any version of Windows Server (or Windows XP
Professional). However, you must install and configure it. I am not
an IT or web administrator so it took me a while to learn, but
amazingly I got it to work if you're patient and follow the steps.
(I'm speaking of both IIS and Robohelp Server) Clearly IIS
configuration is not a trivial thing and it is assumed that an
author would have help and cooperation from the IT or Web Admin
folks.
As for customizing reports. At present, the existing reports
are the only ones offered. Since these reports are generated from a
database (Access, SQL Server or Oracle) I would think (haven't done
it myself) that someone familiar with database adminstration could
open the DB (after a backup that is) and be more creative with
generating customized reports.
You are right that the "Question" does in fact mean any
search term or phrase that an end user puts in the search field.
This is the string that is stored and reported as a question. In
discussing this with the Adobe team at STC last month, they agreed
that this was definitely a holdover from the legacy software and is
due for a change sometime in the future.
To answer your other question, text entered in the Index
field is not stored in the database, only the search term field.
Since taking on the old legacy product from eHelp and
Macromedia, Adobe is focusing most of its attention on beefing up
the client authoring app for the next version (Adobe RoboHelp 7).
My assumption is that they are keen on improving the RoboHelp
Server as well. I have passed along many feature requests along the
lines you seem to suggest and hopefully the server will evolve
along with the client app.
Even with its limitations, my clients tell me RoboHelp Server
provides very useful feedback to help them improve their knowledge
base content to make it more helpful and responsive to users needs.
They also like the searchability of PDF, Word, PPT and Excel as
well...something which plain WebHelp without the RoboHelp Server
does not do.
I probably didn't get to everything, but hope this helps.
John -
Need Info about BW CRM Analytics
Hi all,
Guys,
Please help me out...
I need Info about BW with CRM Analytics
What are the core areas where data's are extracted for CRM to BW
What will be the Interview question related to BW CRM Analytics
If possible if u have any docs kindly email me at [email protected]
Thanks in Advance.
Jaffer Ali.SDear Jaffer Ali S.,
The following types of analyses can be carried out:
<b>CRM Lead Analysis</b>
Use the InfoCube CRM Lead Management (Technical Name: 0MKTG_C01) for reporting.
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
Channel Analysis
Efficiency Reporting
Historical Evaluation
Lost Leads
Channel Management: Top-n Lost Leads (Current Year)
<b>CRM Activities Analysis</b>
Use the InfoCube CRM Activities (Technical Name 0CSAL_C01) for reporting.
The InfoCube for activities in CRM provides the data basis for evaluating business activities undertaken by your employees. It provides you with information about how much time is being spent on contacting the customer, whether customers actively seek out contact with your company and how intensively your employees look after your customers. It delivers data for queries such as:
Intensity of customer care
Activity History
Success/failure analysis
<b>Customer Interaction Center (CIC)</b>
Activate the InfoCube Interactive Scripting Evaluation (IC WinClient) 0CRM_CIC1.
Interactive Scripting Evaluation (IC WinClient)
This InfoCube provides the data base for the interactive scripting evaluation. It supplies the data to the Interaction Center (IC): Interactive Scripting Evaluation query.
<b>Opportunities Analysis</b>
Activate InfoCube 0CRM_C04 - Opportunities.
The CRM Opportunities InfoCube contains all the characteristics and data used for the opportunities analyses.
<b>Sales Order Complaints Analysis</b>
Activate InfoCube Complaints (Technical name: 0CSAL_C09).
You can carry out the complaint analysis on a daily, monthly, weekly or a quarterly basis. The analysis can be done in relation to CRM Service Organization, CRM Sales Organization, CRM Product, and Sold-To Party.
<b>Service Qualtiy Analysis</b>
Activate the MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints.
The MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints gets the data from the following ODS objects for analyses in various queries:
0CRM_PROI - Orders: Item Data
0CRM_COI - Controlling (Item Data)
0CRM_CNFI - Confirmations (Item Data)
0CRM_COMP - CRM Complaints (Items)
Let me know if you need further help.
Reward points if it helps.
Regards,
Naveen. -
Need deeper info about RPC paradigm
Having scoured the Web for info about RPC, I find the same few discussions repeated widely, but certain things left unexplored. I therefore have particular questions that remain unanswered.
1) RPC server behavior appears predicated around "connect-call-disconnect, connect-call-disconnect, ..." behavior on the part of the RPC client; that is, a connect-and-disconnect around every remote procedure call. I, on the other hand, need my clients to implement "connect-wait-call-wait-call-wait-call-...-disconnect" behavior; that is, to connect, REMAIN connected for an extended period of time across multiple procedure calls, and disconnect only when the client is ready to terminate all use of the server. It appears that svc_run() supports this, but I want to avoid surprises; is there any restriction on this usage of svc_run()? Can this paradigm be supported by appropriate use of the RPC library routines available for replacing svc_run() with my own code?
2) The only "documentation" I have been able to find about how to write actual RPC programs dates back to 1992 and does not come from Sun. Virtually all of the routines appearing in its example programs are designated "obsolete" or "for backward compatibility" in their manpages on Solaris 8. Can you recommend/point to an instructional text that describes RPC programming as it would be done with "today's" interface?
3) Probably the largest single obstacle to my organization's possible use of RPC in "real," critical applications, is RPC's continuing C-specificity. We write all our applications in C++, and mostly object-oriented C++ at that -- whereas RPC appears not to have advanced beyond the "C with global variables" architecture (with one possible exception, following). Code generated by RPCGEN (without the -C switch, I admit; I haven't gotten that far in my trial-and-error experiments, yet) requires extensive hand-editing in order to compile C++ code that uses it, or link successfully with compiled C++ code. This obstacle is severe enough to potentially render RPC an unacceptable solution for us.
The possible exception I mentioned is that I found a webpage that discussed something called 'rpcc,' which appeared to be an object-oriented, C++ implementation of RPC. The page said this was available "on Sun machines," but I don't find it on MY Sun machines. Other searches do not turn up other references. Such a thing would be a godsend if it existed, and it would seem not to be so difficult for Sun's professional developers to create. So does it exist? If so, how can I get my hands on it?
4) Different sources contradict each other as to the "semantics" of an RPC procedure call. Sun's ONC manual says flat-out that Sun RPC provides only "at least once" semantics -- but then, the manual takes the approach that one is using RPC in a "transport-independent" manner. Other references discuss the issue at greater length (hint, hint) and imply that any RPC implementation can provide "exactly once" semantics, providing that one specifically force it to use "a reliable transport such as TCP." It is not clear how much to infer, or disregard, in Sun's simple statement. I need to know FOR SURE whether Sun RPC can be made, forced, tricked, etc. into providing "exactly once" semantics. If so, is "use of TCP" sufficient? Or are other tricks needed? Please outline the necessary steps that might be needed in addition to using TCP.
5) (Related to 4. Sun documentation contains language to the effect that Sun RPC provides "at least once" semantics because providing "exactly once" semantics "would be too difficult." However, a graduate student (at Syracuse U if I recall correctly) posts a research paper in which he describes an RPC facility, developed from scratch, that provides "exactly once" semantics. Apparently it's not THAT difficult, after all. The fact that it's "too difficult" for Sun does not exactly flatter the company. They may want to revisit this, and provide yet another RPC interface (in C++ while they're at it). I won't even charge a finder's fee. ;-) )
Thanks in advance,
ChrisI agree fully.
None of the example code applies to todays
"real-world" applications. Im trying to implement
multithreaded RPC on Solaris using rpcgen's -N
"NewStyle", -A "Auto multithreaded" and -C "ANSI C"
options but none of the examples anywhere show how to
do this. Is their a better technology that everyone
is using now that does a similar thing?I have an example that might help. It's a multi-threaded
NIS server that's been running in production for several
years. There are a few tricks in the source that might help.
You can download the source with anonymous FTP at
ftp.cc.umanitoba.ca. Look in the `src' directory for
midas.tar.Z. -
Need info about 2006s(5.1/5.2)
Hi,
Need some info about the new product 2006s (5.1/5.2), what are the new features, whats new on the technology side, what skill sets will be required for these products.
is GUI/SPRO still there in the new products or some new config tool is being introduced.
any info is helpful, pls share usefull docs, links to SAP docs.
pls email me at [email protected]
thanks
RHHi rh,
The theory is a new interface, replace gui an pcui. The configuration is based in business roles and this configuration is with spro customizing. Web Client tecnology based and the most important news is a new configuration tool to modify the layout.
Regards.
Manuel -
Expanding iTunes fields to handle more info about each CD (Mac & PC)
The LP and CD covers often hold a lot of important info about the album, music and artist, producer, history. With the use of physical album covers on the decline as we use iTunes/mp3s more and more, a lot of liner notes and credits are no longer with our music. iTunes doesn't even have a field for Producer or engineer! But what about cover art or room for the players on the records, etc. (can you tell I used to work at record companies?
I think iTunes needs to be redesigned to take the place of a CD jewel box so we can get much if not all of the info on the digital album. Even a tab for additional artwork as some CDs have not just front cover art but also back cover or what about the box set where there's the boxset art but each CD has it's own CD cover art. Currently I just use the art from the CDs but then lose the art from the outer box, which I would like to be able to include in the future.
The current Comments fields is WAY too small I'm thinking you could as a tab that would be fore the entire record like the size of lyrics so you could put all the players, liner notes, quotes, etc. in an unstructured way and be able to see most of the data without having to scroll so much.You can associate a PDF with an album and put as much or as little information in it as you want. Some album downloads come with digital booklets which may, but often don't, replicate all the information from the original packaging.
You can also embed additional artwork images in a files tag. Files with multiple images develop two triangles at the top of the artwork box to let you switch between the available images.
While I agree the artificial limit of 255 characters for Comments in iTunes is annoying if you put any such information into the Lyrics field there is the bonus that it can actually be viewed from your devices.
tt2 -
Need some info about Equium A60
Hi,
I am looking to upgrade RAM on my laptop which is a Equium A60 (PSA67E-001004NO). I need to know what speed my motherboard supports... I posted a question some time back and got the impression that my laptop can take 533mhz but I enquired other places and got the idea that my laptop supports 333mhz. I need to know the correct value my motherboard supports. Whether its 333mhz or up over..
One thing more I need to know is there any way one can check for the configuration that laptop has, because there is nothing about this Equium on the net or Toshiba site...
I remember to see a page on which all hardware and preinstalled software details of Equium A60 PSA67E-001004NO were on the net but I fail to remember where I saw it..
Can someone help in any way?Hi
Your notebook has 256MB internal memory and just one slot is available for memory expansion. I have found info that your unit can handle with 1280MB max.
The compatible memory modules are:
PC2700 256MB (PA3311U-1M25)
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
If you want check part numbers on Google and you will find out all info about those modules. I have no time now to check it for you.
Bye -
Need info about GN_INVOICE_CREATE
Hi experts!
I need to create Credit / Debit memo invoices in my Z program, so I decided to use GN_INVOICE_CREATE for this, but can not find info about parametres of this FM....
could anyone explaine how to use this FM or maybe someone has a peace of sample code of using this FM?
Helpful answers and advices will be rewarded.
Here is this FM:
CALL FUNCTION 'GN_INVOICE_CREATE'
EXPORTING
DELIVERY_DATE =
INVOICE_DATE =
INVOICE_TYPE =
PRICING_DATE =
VBSK_I =
WITH_POSTING =
CALLER_TYPE =
I_WITHOUT_REFRESH =
ID_NO_ENQUEUE =
ID_KVORG =
ID_NO_DIALOG =
ID_NEW_CANCELLATION =
IMPORTING
VBSK_E =
TABLES
XKOMFK =
XKOMFKGN =
XKOMFKKO =
XKOMFKTX =
XKOMV =
XTHEAD =
XVBFS =
XVBPA =
XVBRK =
XVBRP =
XVBSS =
XKOMFKZM =
SUCCESS_DOC_OUT = .Hi Mindaugas,
check BAPIinvoice in SE37, e, here u cannt directly make use of GN_invoice_create, Bcos here u dont have condition records data.
so search in SE37 or Tcode BAPI , here u can get FMs along with Documentations.
Regards
Peram -
I need info about CL_XML_DOCUMENT
Hi to all,
I need info about the class CL_XML_DOCUMENT and his methods.
I only have seen information of a few methods.
Where can I find more information and examples of use about this class?Hi,
This question is already answered before in this forum, check out the below link -
Information about CL_XML_DOCUMENT
Hope this helps. -
Gettin info about Flash file's data rate (and more) on Mac
In Quicktime one can get all sorts of info like frame rate,
data rate, codecs and more, but flah players don't do this. Right?
I see there is special software for this for a PC, but what about
Mac? Is there any way to get this info for files I didn't make
myself.I am referring to video files that I am making out of .mov
files. I am trying to find best cmpression options, but to do that
it would be nice to study others' files.
Maybe you are looking for
-
My iPhone 6 doesn't work with Audi MMI adapter
When I try to connect my iPhone 6 to the Audi MMI adapter in the glove compartment of my 2015 Q5, it shows up as a source on the media screen, but says there are no playable files.
-
I deleted Mail on Mac OS X by accident, now I can't recover it . what shall I do ? Thank you.
-
Piano rolls for multiple tracks
Hi, is it possible to get Logic to open 2 or more piano rolls for different tracks at the same time? It would help with editing if so. Cheers
-
Syncing photos from mac only syncs folders
Hi, Im having some issues with my iPhone 6 plus 128 GB and MacBook Pro 15" In total i have around 24.000 pictures on my MacBook Pro 15" that i would like to synchronize to my iPhone. The issue being that when i sync the photos only the folders are sy
-
Bizarre Vista Error - Macromedia Flash Player 8.0 r22 has stopped working
In Vista Ultimae, I now suddenly get a message after starting up saying: " Microsoft Windows Macromedia Flash Player 8.0 r22 has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if