Info idocs and request idocs
Hi,
I am working in SAP BI extraction presently.
In sap bi/bw systems, data is taken out from SAP R/3 system and sent into BI/BW via Idocs.
This process is called as extraction. I know that data transfer between the SAP R/3 and BI systems happen via idocs.
But here in sap bi we have two type of idocs,
1. Request idocs ( Message type is RSRQST)
2. Info Idocs (Message type is RSINFO)
Request idocs come from BI system to R/3 and from R/3 system data is sent to BI system via Info idocs.
Please can some one give clear explanation about these request and info idocs and how technically they are different
from normal idocs.
Regards,
Lakshminarasimhan.N
no reply to the question and hence closing the question from open status to answered status
Similar Messages
-
Track changes in customer material info (VD52) and create custom IDocs
Dear experts,
we want to track changes, which are made in VD52 (Customer matertial info record) and create custom IDocs (Z-format) based on these changes. What is the best way to do this?
Best regards,
DavidHi,
There are a dedicated BTEs (Business Tranaction Event) for this purpose (transaction FIBF).
- created customer material infos OUTBOUND_CALL_00504001_E
- changed customer material infos OUTBOUND_CALL_00504002_E
- deleted customer material infos OUTBOUND_CALL_00504003_E
You can assign your own FM to the BTE and send custom IDoc whenever there is a new/updated/deletd customer-material info record.
Regards,
Marcin -
Info IDoc received with status 8 in BI but Data available in source system
Hello Experts,
I am loading Budget Period (attributes) into PSA in BI.
Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
Data source: 0PU_BDGTID_ATTR
This is full load.
I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Already looked this thread and googled also.
Re: IDoc received with status 8.
Check points:
sm58 - NO issue
BD87 in ECC (RSINFO Idoc status: 03) -sucessful
BD87 in BI (RSINFO Idoc status : 53)
ST22 - NO issue
sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
I am not sure if I am missing any thing.
Thanks
RanaHi all,
I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
RS3 (R/3) - > 0 data
ST22 -> no short dump
WE05 (Idoc) - > everything is ok
I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
Any ideas?
Thanks
jak -
Loading Error from CRM datasource - Info Idoc recieved with status 8
Hello All,
NEED YOUR HELP
We have a CRM datasource 0CRM_SALES_ACT_1 which works well from source in RSA3. The dataload is a full and fetches 19,000 records from CRM
However when we load it from an infopackage from BW it gives us the following "No data in source sysetm" Info Idoc with status 8. We have tried the following to eleminate some doubts
1) Checked the connection in SM59 using aleremote .Connection and authorization successful. Also loaded data in the BW system for other datasources from same CRM system it works well, so no authorization/ connections issues.
2) In the source system CRM tried transaction RSA3--> extract data get 19000 records
3) In the source system CRM Triied transaction RSA3--> Import Request from BW --> successful.
4) Checked the TRFC queue in SM58 the TRFC queue is empty
5) When we check the logs in CRM for ALEREMOTE we get the following message
synchronous transmission of info IDoc 2 in task 0001 (0 parallel tas
DATASOURCE = 0CRM_SALES_ACT_1
Current Values for Selected Profile Parameters
abap/heap_area_nondia......... 0
abap/heap_area_total.......... 9437184000
abap/heaplimit................ 40000000
zcsa/installed_languages...... ED
zcsa/system_language.......... E
ztta/max_memreq_MB............ 256
ztta/roll_area................ 3000000
ztta/roll_extension........... 2000000000
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 266228, Duration 00:00:00
IDoc: Start = 2008.10.22 14:18:38, End = 2008.10.22 14:18:38
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 266229, Duration 00:00:00
IDoc: Start = 2008.10.22 14:18:39, End = 2008.10.22 14:18:39
Job finished
*What is the issue ? Data is present and confirmed available in source system , yet we get 0 records in BW system ? WE NEED YOUR HELP *Hi
May be you need to provide full authorizations to the user 'ALEREMOTE'.Ask your basis team to check the authorizations.
Regards,
Chandu. -
Error message : Info Idoc missing ;database system
I am trying to load the data from database system oracle ,the data was successfully loaded into psa , but cant able to load the data into ods from psa .
Data in psa is all green without any errors , as info idocs are missing its not letting to load data manually from psa to ods ,
I try to reload but coming up with same error
Next day problem was fixed automatically, I want to know what is the exact reason for this problem and how can next day it fixed automaticallyError message : Info Idoc missing ;database system
I need the solution urgently, please help -
How to limit Data Packages/ Info IDoc in InfoPackage to 3 while executing
Hi,
In our system BW 3.5 We have couple of both BC Extractors and Generic extractors. All are working fine, but with one generic extractor I got problem like if I run the InfoPackage of Full Load type. All 34 Data Packages are fludded at a same time( but with other InfoPackages only 3 Info Idocs are running at a time and new Info Idoc is starting only after completing old Info Idoc).
So Please let me know how to control only three Info IDocs at a time than all Info IDocs at a time. because I am scraring on monitoring in SM66 and all dialog Processes are looking same time and executing all Data Packages in same time.
I will assign points.
Thanks,
KaveriHI Kaveri,
http://help.sap.com/saphelp_nw2004s/helpdata/en/17/e0603801be792de10000009b38f842/frameset.htm
just go through the above link....
Hope it helps,
Ajay -
Info IDoc received with status 8 infopackage hanging in yellow status
Hi All,
when I extract the Text data without data selection it is fetching the 14 record into BW and changing the status to green,
however when I go with data selection it has No record for this selection in RSA3 as well in BW .
when I do this data selection in infopackage in BW it is bringing ' 0 ' records and hanging in to yellow status in RSMO for more than two days. it is not turning it to red/green
it shows in Monitor with message " Info IDOC received with status" in yellow status.
I have found the OSS 713427, it is already had this correction .
when I check in SM37 job is completed immediately.
there is no short dump
Many Thanks
RammHi Robort,
thanks for reply
there is no data for this data selection and there is no IDOC processed in BD87 or we02.
I checked out the note and its only for IDOC stuckup .
may I have any other suggestion.
many thanks
Ram -
Job termination in source system /Asynchronous transmission of info IDoc 2
Hi All,
We have certain loads that we do every 2 hours, which will run for 20 to 30 minutes to load current year BCS data into a Basic Cube. So, In total we schedule 12 times in a day. This is needed as we have users around the globe.
We have totally 10 BGD processes and 10 Dialog processes.
These loads are scheduled through a process chain and we submit three parallel jobs at a time based on the version and in total we have 15 loads, 5 per each parallel job.
We went live with this process yesterday and the jobs ran all well until today afternoon, when they started giving the following message and when I checked the log of the process chain, one of the InfoPackage did fail with job termination in the source system.
The job log is as follows:
Date Time Message text Message class Message no. Message type
06/20/2007 13:55:47 Job started 00 516 S
06/20/2007 13:55:47 Step 001 started (program SBIE0001, variant &0000000014146, user ID RFCUSER) 00 550 S
06/20/2007 13:55:47 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks) R3 413 S
06/20/2007 13:55:47 DATASOURCE = 80BCS_VC10 R3 299 S
06/20/2007 13:55:47 ************************************************************************* R8 048 S
06/20/2007 13:55:47 * Current Values for Selected Profile Parameters * R8 049 S
06/20/2007 13:55:47 ************************************************************************* R8 048 S
06/20/2007 13:55:47 * abap/heap_area_nondia......... 2000683008 * R8 050 S
06/20/2007 13:55:47 * abap/heap_area_total.......... 2000683008 * R8 050 S
06/20/2007 13:55:47 * abap/heaplimit................ 40894464 * R8 050 S
06/20/2007 13:55:47 * zcsa/installed_languages...... EFD * R8 050 S
06/20/2007 13:55:47 * zcsa/system_language.......... E * R8 050 S
06/20/2007 13:55:47 * ztta/max_memreq_MB............ 2047 * R8 050 S
06/20/2007 13:55:47 * ztta/roll_area................ 3000320 * R8 050 S
06/20/2007 13:55:47 * ztta/roll_extension........... 2000683008 * R8 050 S
06/20/2007 13:55:47 ************************************************************************* R8 048 S
06/20/2007 13:58:04 NONE UGBW 001 E
06/20/2007 13:58:04 Job cancelled after system exception ERROR_MESSAGE 00 564 A
I do not have acceess in BWP to get you the Data Transfer Parameters within BW system.
Any suggestions would be greatly appreciated.
Thanks & Best Regards,
- ShashiHi Shashi,
Check in st22 for any dumps, do you have any pointer there?
Also check sm21 to identify possible cause of errors.
Regards. -
Info IDoc : sent, not arrived ; Error passing data to port
Hi Folks,
While I am loading the data from R/3 I am facing the following error in Production..
Info IDoc 2 : sent, not arrived ; Error passing data to port
when I checked in SM59 every thing seems fine like RFC test connection and authorization check
In BW is check the Source system saying it is Ok.
Only the thing I found here is in TRFC, it is error when opening RFC Connection.
but it is different in SM59 saying every thing is ok, as said above..
Please help me in this regard
thanks masters
DJSrinivas,
Thanks for your prompt reply..
user : ALEREMOTE and password are fine..
As told I check st22 and sm21 in both sytems, no sort dumps I found..
Please help me its an urgent..
thanks
DJ
Message was edited by:
Jangareddy dasari -
Re: Info set and query transport under same request number
Hi,
I would like to know the details about info set and query transport from development to quality using SAP Query: Trnasport tool.my quesion is,
Can i create all info sets and related queries under same request number or will it be created in diffrent request numbers?Please respond any body to my question.
Regards,
Suresh Kumar.No it is possible as per SAP.
Please read follwoing help-
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
It is talking abou the Special Features of InfoCubes in InfoSets.
For queries based on an InfoSet with an InfoCube, the system decides at runtime whether aggregates can be used for the InfoCube. This is the case if all the required InfoObjects of the InfoCube exist in an aggregate. The following InfoObjects are required:
The key figures of the InfoCube selected in the query
The characteristics of the InfoCube selected in the query
The characteristics required for a join with other InfoProviders in the InfoSet.
Furthermore, as a prerequisite for using aggregates, all the data required by an InfoCube must be readable using logical access. For an InfoCube within an InfoSet with InfoCubes, it is no longer possible to read part of the data from one aggregate and part of the data from another aggregate or the InfoCube itself. -
Goods Recipient and Requester's address info in SC
I need to change the address information of
Goods Recipient and Requester as they are moved from one organization to another oranization. So, where I need to make a change for Goods Recipient and Requester's address information in EBP system.
Thanks in advance!
MrudulaHi Mrudula,
do you want to change Goods Recipient and Requester addresses on all old SRM purch doc (SC, PO...), or only on the user org data.
Because when moving a user from one organisation to another, he will inherit the new address from the new org ID.
You can also process users via web transaction "Maintain internal users" BBPUSERMAINT, available in admin role.
Rgds
Christophe
PS: please reward points for helpfull answers -
How to upload data from POS Workbench to BW Info Cubes and then to SAP R/3
Hi,
I have used some sample data as input to BAPI "/POSDW/BAPI_POSTR_CREATE" to create sample transactions in POSDM.
Then I had executed this data to POS Workbench.
Now my requirement is to upload this data further to Info Cubes and then to R/3 in IDocs format.
Can anyone please tell me the method to how to do this?
Thanks in advance.Hi,
Please see the below links,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/5ef84112f49c39e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0f/7af634b576bc4ee10000009b38f83b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b7/b6d59344e93443a7ac8934d2acfb55/frameset.htm
Hope this helps,
Regards
CSM Reddy -
Purchase info record and Contract are not reflected in SC
Hi...
while i am creating a shopping cart in SRM for a particular product... i am not able to find the Purchase info record or Contract in SC - Source of supply tab...
I maintained the Purchase info record and Contract for the particular material in Backend(4.7n).
Plz throw some lights on this...
thx....Hi
if you are using classic scenario it might have dispalyed in SOS.
check info records/contracts are existed in backend for your product in srm?
is your cart is special request(describe requirement ) or internal goods and services?
if you are in ecs mode. it is not possible to see your inforecord/ backend contract in srm sos window
regards
muthu -
Failed info package, failed request turns from red to green after 1 hour so
hi,
There is a failed info package and if u go to monitor screen, the request status will be red in colour but then the same request after 1 hour or so turn from red to green automatically, why is this, what could be the possible reason??????????Hi Lieu.
The system automatically sets the status for the load to incorrect if the waiting time is exceeded. The load will still be running even though it might look incorrect, and that is why it turns green when it is complete (and everything is correct).
You can set the waiting time if you go to the monitor -> choose a request -> settings -> waiting time up to status incorrect (ctrl + F9).
Hope it helps (assign points if helpfull!).
BR
Stefan -
Info about deleted request ( log )
Hi experts,
i deleted the request over cube. I received info about request-id and "request number" in log.
Can i obtain more info about this request, which was deleted ( e.g. InfoSource, DataSource) in any SAP table ?
Thanks in advance
MartinHi Martin,
Use transaction :SLG1
enter the Object * , sub obj -* and enter the From and to Date/Time -- execute
you can get the complete details.
Check the table :RSREQICODS_SAVE(Requests Deleted from Administration Stored Here)
Regards
KP
Edited by: prashanthk on Dec 9, 2010 3:06 PM
Maybe you are looking for
-
Credit is Insufficient or Inapplicable
I'm getting the following error when trying to purchase songs on iTunes: "Your remaining credits are insufficient or inapplicable to this purchase. Your account will be debited for some or all of this purchase." There is a Buy and Cancel button on th
-
Trace file issue...
Hi All, When I start the database it contineuos write the trace file without any reason.. These are more information on this -rw-r----- 1 oracle dba 95433 Oct 18 12:49 owsidev_reco_1273966.trc -rw-r--r-- 1 oracle dba 302216 Oct 18 12:49 alert_OWSIDEV
-
Ghost files downloading at random from Safari?
Okay, so I already realize my computer has passed its prime and is on the downhill (it's a steep one too), but I am trying to make it last. So, before I'll ask my question I'll let you know that my computer is only running on half RAM (512 instead of
-
Safari 6 OS 10.8 Mountain Lion - can't establish a secure connection to the server
Hi everyone! I have difficulties with Safari 6 on OS 10.8 Mountain Lion... When i attempt to connect to various secure http sites, Safari will fail to connect, saying "safari can't open the page because safari can't establish a secure connection to t
-
Adobe Reader XI インストール後 "an internal error occurred" と表示が出て開けない.
OS:windows7 pro Adobe ReaderⅪをインストールしたところ."an internal error occirred" と表示が出て開かなくなってしまいました. 何度か.アンインストール.インストールを繰り返してみましたが.変わりありませんでした. ネットで検索しても.レジストリを書き換えてください.などと出てきます. PC初心者なので.PCがおかしくなっても困るので.レジストリは極力変更したくありません. どうすれば直せるでしょうか.ご教授のほどよろしくお願いいたします.