Info in the basic html do not correspond to the detail html....
Hi ,
Sometimes , i face up to the incosistency of info between the basic page
http://forums.oracle.com/forums/categoryHome.jspa?categoryID=84
and a corresponding detail page regarding the last poster's name.....
For example:
General Database Discussions
I have this kind of problem no matter of which web browser i do use....!!!!
Greetings...
Sim
Hi Hans...
I simply wanted to describe the following phenomenon ...:
At around 13:30 p.m. (local time) yesterday, i have answered in the db forum...
Whenever , in the next 10-20 minutes time , i inspected the last poster's name in
http://forums.oracle.com/forums/categoryHome.jspa?categoryID=84
i found a different name than mine ... but when i got into the detail htm form
General Database Discussions
i found mine always in this time period.....!!!!!
I also have faced up this inconsistency some times in the past....!!!!
Unfortunately , i have not a web site so as to 'take a photo' and upload to it ...of this 'phenomenon'....
"One thing comes to mind, and that is the amusing but rather useless 'count of posts by top users' which seems to be handled by a type of summary view apparently ...."
There is another 'inconsistency' here .. at least temporary....
I have faced up several times - more often than the first described- which at time t0 , it introduced i have A posts and time t1 that i have A-1 or even less posts....
When i connect to Oracle Forums next day ... this inconsistency has vanished...
I have tried both web browsers.. with the same results....
Thanks...
Sim
Similar Messages
-
I have to switch over to the basic html view. Also , I am having problems while reading mails from my yahoo account. Some other sites (www.jobztoday.in) are also not loading properly.
Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
How to manage Locale info in the URL path, but not the query string
We are building an application using Struts 1.1 and Tiles, on Oracle Application Server 10.1.3.3...
I know this is a strange question... but we have a requirement to represent the locale info in the URL string using one of the following options:
option 1: /eng/page.do?id=2 for english.../fra/page.do?id=2
option 2: /page-eng.do?id=2 for english.... and /page-fra.do?id=2 for french
We need to represent the 3 letter ISO lang code either in the directory structure, or suffix the page name (in our case, the struts action name)... we cannot replicate this using a parameter in the query string. I know this is odd, but that is what we are told to implement.
Is there any robust way of implementing either option in Struts 1.1, JSP, JSTL etc...?
Currently, we are looking at using a servlet filter to intercept the HTTP requests, parse the URL string, and extract the ISO lang value, and set locale and forward on the request.
This poses a few problems... adding additional action mappings (page-eng... page-fra... page) to our struts-xml.config file to handle lang permuations... but the biggest issue is all the embedded html:link action values throughout our code...
Because all our public facing URLs must comply with the rule, we need to change the html:link action to point to a different action, based on locale.
Very inefficent, and I'm sure not industry standard best practice... we are using Tiles, and resource bundles for all our labels etc... but fall short in meeting this rule with regards to URLs and locale.
Any advice or tips etc.. is greatly appreciated.The filter option sounds like a good solution. So it can receive the urls and parse them appropriately.
You just need to take it one step further.
Additional actionmappings in your struts-config should not be necessary.
Filter:
- analyses the url and sets the appropriate locale
- adjusts the url such that the next level of the chain does not have to know anything about the locale being encoded in the url string.
Thus your struts classes and mappings can remain unchanged
/eng/page.do or /fra/page.do once through the filter should just look like /page.do to struts.
That should get rid of half of your headache.
Next the issue of generating urls.
There are two approaches I can see here
1 - use the filter approach again, this time with some post processing. Gather the generated HTML in a buffer, and do a find/replace on any urls generated, to put the locale encoding into them.
2 - Customise struts to produce urls in this format. This would involve the html:link tag, and the html:form tag at the least (maybe others?). Get the source code for struts, and grab the html:link tag code. Extend that class to generate urls as you want them to be generated. I think you would need to extend the class org.apache.struts.taglib.html.LinkTag and override the protected method calculateURL. You would then have to edit/modify the struts-html tld to point the link tag at your classes rather than the standard ones.
Option 1 is architecturally good because it gives you a well defined layer/border between having the locale encoded in the url, and not having it there. However it involves doing a find/replace on every html going out. This would catch all urls, whether generated by html:link tag or not.
Option 2 requires customising struts for your own requirements, which may be a bit daunting, but has the advantage of generating the urls correctly without the extra overhead involved with option 1. Of course you would have to ensure that ALL urls are generated with the html:link tag.
On reflection, I think option 1 is preferable, as both easier and quicker to implement, and doing a better separation in the architecture.
Cheers,
evnafets -
Object in import-file header does not correspond to the migration object
Hi Forum,
I have loaded Business partner successfully with the file created in Workbench with test data.
Now I want to load the data from Application server. But i am getting the error
"Object in import-file header does not correspond to the migration object".
I have read that the import file should have 3 types of record
1. Header record corrs to the structure TEMINFO
2. Actual data records
3. Final record for individual object.
I am not sure where I am making a mistake
my files header looks like
<004F><Space><&INFO><Company><Migration Object><User><Date><Time>
Please help.
Thanks in advanceI am assuming you are in transaction EMIGIMP loading a converted migration file for import, correct?
If so, you should be able to read the company, mig. object, user name, etc. in the import file tab overview. If conversion did not work correctly, this info will not display here.
It is possible you are missing some data in the header, or spacing is not correct. Are you converting the input file with program REMIG_FILE_TRANSFORM or are you trying to create the migration file yourself? -
The "File Info..." box does not appear, how to fix?
I have sent this in on the bug fix form and thought id ask on here as well. Basically I am trying to find out the information for my document which I am in the middle of editing, though after clicking on file info within the file menu nothing appears. It wont let me exit indesign as it says there is a dialog box there, the only way i can "exit" this is by selecting enter on the keyboard before closing down indesign. I have tested this on a new document, tried making my screen scale smaller, checked the other desktops and I cannot find or see any file info dialog box when it is apparently in use. I am using an Apple MacBook Pro on operating system "Mavericks-10.9.5". I have done the same sequence of creating a document and selecting file info on photoshop as a test to see whether it crosses over all the software, though this isnt the case. Therefore I have tried to clear my workspace preferences and again to no avail. Can anyone figure this problem out?
Thanking you in advance
Nicole
P.S
This issue has been resolved after finding the below linked post. I reinstalled Indesign and it seems to work fine now, though if the error reoccurs I will add this to my thread. Also something that is worthy of noting is that I also use multiple screens, i vary between using the macbook's screen alone and that of the macbook plus a HD desktop monitor.
P.P.S
Further to using the guidance found in the below thread my illustrator CC has once again encountered this issue. I have been using multiple screens as usual and I am wondering if there is a simpler way to sort the issue out rather then re-installing the software?
Re: file info... window invisibleYou need to burn the CD
using the "Rock Ridge" file extension. This creates
(or adds on to the CDFS, I'm not sure which) a Unix
file system which OBP can understand.No. RockRidge extensions only apply to ISO-9660 filesystems and they can only be applied if you're actually creating the filesystem in the first place. Installation CDs boot from a UFS filesystem that doesn't require RR. (Although they may have an additional hsfs filesystem).
If you have a .ISO file, then the filesystem is already constructed. You can't affect RR extensions at that point. Even simple little ISO burning scripts that don't have any understanding of UFS or RR should be able to construct the disk properly.
I have made it
to this point. I have systematically burned around 25
CDs (all made on Wintel -- an old Gateway PC running
WinXP Pro), taking notes on which configuration
settings were used to make each one, attempting to
install Solaris 10 for SPARC. I am at the point now
where OBP recognizes the CD (I no longer see the
"can't execute" error message), but it can't tell
which CD it is i.e. #1, #2, etc. So, I need to open
up the CD catalog once again, and try to determine in
which logical block the disk ID is located, and then
try to figure out where to enter that information in
my CD burning software (currently experimenting with
"Magic ISO".
Also, if you are atttempting to boot your SPARC
machine from the .iso disk #1, you will need to make
that CD bootable. Use your favorite search engine
with the terms "el torito" "bootable CD" and you will
discover a lot of information on this subject.The .ISO file contains the information for a bootable CD. There's nothing extra you have to do. You'd have to worry about that if you wanted to create a new CD and make it bootable, not if you just want to burn the Sun provided ISO images.
In addition, I'm pretty sure that El Torito is an x86/BIOS standard and doesn't apply to SPARC/OBP.
Darren -
Basic html page will not display for my client!
I have built a new website for a client, and I have plonked
it in a folder on his server so that he can view it without it
being live, but when he views it from his office, the url (which is
correct) loads a page stating that the page could not be found. I
have loaded a preliminary design on a different server, and he can
see that. (Just to clarify, I have loaded it on his server because
his server will display php, my servers are windows and don't do
php, that's why it's a preliminary design on my server)
Everybody I have sent this url to can see the new site design
in the sub-folder, it even works on my iPhone, but none of his pc's
in his office can get to the page. Any ideas as to why? As a test,
the home page is currently very basic html, it simply says in h1
'Can you see this?' but still no joy.
There must be something he has on his system that stops his
network for accessing new files on his own website, but what?
Thanks
Matmatthew stuart wrote:
> I have built a new website for a client, and I have
plonked it in a folder on
> his server so that he can view it without it being live,
but when he views it
> from his office, the url (which is correct) loads a page
stating that the page
> could not be found. I have loaded a preliminary design
on a different server,
> and he can see that. (Just to clarify, I have loaded it
on his server because
> his server will display php, my servers are windows and
don't do php, that's
> why it's a preliminary design on my server)
>
> Everybody I have sent this url to can see the new site
design in the
> sub-folder, it even works on my iPhone, but none of his
pc's in his office can
> get to the page. Any ideas as to why? As a test, the
home page is currently
> very basic html, it simply says in h1 'Can you see
this?' but still no joy.
>
> There must be something he has on his system that stops
his network for
> accessing new files on his own website, but what?
Could it be a Firewall issue?
Dooza -
When I sign in to Gmail in FireFox I get this mess -Error undefined If this problem persists, try reloading the page, or using the basic HTML version. Learn More.
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I go to Google Maps and try to enter address in search bar.
Message pops up: "Still loading... Slow? Use the troubleshooting guide or basic HTML"
Nothing ever comes up -- map does not load.
If I append "q?=us" to url (below) (without quotes), it works.&q=us does not work.
Starting firefox in safe mode does not work
Map loads but entire page except main menu is non interactive.
"Still loading... Slow? Use the troubleshooting guide or basic HTML"
It comes up on google.com.au but not google.com
It happened after they added the new privacy popup with with MapGL also being added.
Disabling all cookies with Web Developer or browsing in private mode works but when settings are put back to normal it stops working.
I deleted all cookies and cleared cache but that did not help. Strange that clearing cookies did not solve the problem because disabling cookies works.
I tested with another browser and it works... but I want firefox forever. -
What is the idea of a new control panel if you can not in fact get an overview or kind of dash board?
Settings includes PC+Cloud, i.e. Accounts let you do settings for the cloud, i.e. connect to your live account.
But why are basic webservices settings not included (i.e. OneDrive settings is in the system tray)?
Great consolidation is happening now between settings, control panel - i.e. getting rid of obfuscation, blur and complexity between legacy settings (control panel) and actual kind of settings. However do not recreate the problem by leaving the
next step of integrating cloud settings across the middleware. What is the idea of a new control panel if you can not in fact get an overview or kind of dash board?Hi,
Interesting issue, what about other configuration or settings? Do they work fine or keep reverting after a reboot? Have you tested this issue in another user account? What is the result?
Regarding to unable to save settigs for current user hive, I doubt whether there's an application you installed recently or an malware\virus changes the permission of registry entry or value of registry keys like
HKCU\Software\Classes which causes this issue.
Yolanda Zhu
TechNet Community Support
Hmm... I don't understand. Nothing is reverting after a reboot, as well I'm
not unable to save settings in the current user's hive. The correspondent registry keys can be saved perfectly fine and they are
deleted, not reverted after a reboot. I pointed to the exact code that does it, the code is located in Microsoft DLL with all certificates and digital signatures intact. Permissions obviously don't matter, since svchost.exe is executed with the highest
integrity level and under the System user account, the keys in question inherit permissions, which allow System to do whatever it needs without restrictions
by default, you can't change it to allow more.
So can you explain how it can be some malware?
The issue is intermittent, I don't have a 100% repro, therefore “testing” under another user account is doubtful.
Dei nostra Matrix est. -
i do not know what i have done but since yesterday every window i open in firefox shows up in basic html format
hello, please go through the steps covered in [[Websites look wrong or appear differently than they should]] - they contain the most common solutions for the issue you've described...
-
It is very frustrating even to receive an email from itunes support telling me: well, if your code or card are not working call your bank, which I did and everything is fine, it matches with existing acct in itunes...
then I tried and tried and time after time I keep getting the same stupid answer "invalid security code"
I am tired of it!
And then I contacted support just for an idiotic answer: well, use an itune gift card then.... Come on! Are they really not goint to do anything to help me and restore my info in the itunes acct?????
Can someone tell me what to do, please! I am telling you... its frustrating I cant even update because the stupid system keeps asking me for the security code of my card!!! And it is the correct one!!!
HELP!
ChapinaZI'm also on iPhone 4, iOS 6, and have exactly the same problem. I've tried resetting privacy settings, turning restrictions on and off, deleting and reinstalling apps. Nothing seems to work. The lists of apps in privacy settings are all empty, except for location services. When using Tweetbot the app is regularly asking for permission to access my twitter account, but even when I allow that, the app doesn't show in privacy settings.
-
Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out
Hi Elaine
Here si what I do:
Since I tend to message with teh same people I leave the messages available to me. If you are in one conversation with "Karen" and want to message with "Kathy" tap the message back arrow and select Kathy.
As always just be careful to rememeber who you are messaging to! -
HT1918 How do I delete credit card info if the none option is not given
I wish to delete my visa vanilla gift card info because it no longer has any value but when I go to the edit billing info page the none option to break the connection is not given and it tells me I am useing a different device and need to conferm the security code on the gift card but when i do it says the code is not valid when i know it is because i'm looking at it on the card. . WHAT DO I DO TO TAKE THE DEAD GIFT CARD OFF?!?!
https://discussions.apple.com/message/24352653#24352653
This dicussion thread may offer a solution. -
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.
Use it the same way as previously.
ctrl B shows the menus.
ctrl S shows the sidebar.
What else do you need help with?
Maybe you are looking for
-
Hi, I have one problem for import PO printing documen tcurrency in USD for on PO in line item price the amount is coming as 4.7185 dollar which is OK but in another PO insted of 3.900 Dollar it is printing it as 3,9000 even though
-
Zip download not working for IE, but works with mozila and crome browsers
The requirement is: we need to download a zip file, and the zip file may contain more than one csv file. The application is deployed in Linux server and WebLogic 10.3.2. In internet explorer the zip files downloads as a corrupt file which cannot be u
-
Production confirmation screen CO11
Hi All, My requirement is that during Prod Order Confirmation using transaction code CO11, the yield is not appearing in the initial screen to suitably select the quantity needed for confirmation. It comes in a subsequent screen and in case I need to
-
I have a movie on DV cassette. I loaded it into an Apple notebook (OS X Tiger) using the Firewire connection. I edited it in iMovie and saved it in Quicktime format. When I try to burn it to a DVD-R, iDVD wants to add all sorts of "Garbage" project s
-
Im trying to update my apps from the ipad in the app store section and when i press update the ipad tells me that im not connected to the itunes store??