Info Link Not Visible in DefaultFileStore filestore provider UCM

HI, I have a strange issue, where "Info" link is not visible under Providers--> DefaultFileStore.
I can see the Test link, but not Info. Could you please let me know if this is some kind of admin functionality that I was not able to vew this.
I am loggin in as sysadmin...
thanks for your help in advance
Sreeram

Issue resolved..Just need to install FileStoreProvider Component.

Similar Messages

Personalize link not visible in MastHead area..

Hi guys,
I need users to change their pwds, but the personalize link is not visible in the MastHead area?
Any ideas, what is wrong?
Thanx, Peter

Hi Peter,
check the masthead par file....and enable the personalize link in the par file....
then deploye it again to the potal server
and add this par file to the standard user role under the content provided by sap....
now log off and log in again.......
cheers,
sithi

Personalize link not visible in mast head

Hi ,
The personalize link is not visible in mast head.
Can anyone guide me on this .
Best Regards
Sid

Hi
Go to Content administration -> Portal content-> Content provided by sap -> End user content->Standard portal users -> Worksets-> Portal personalization to the role of the user
You can also assign eu_role role to that user to enable the personalize link in masthead but this brings iviews too in the content area.
Regards,
Ganesh N

Html link not visible as table header in jsp

Hi,
I am not sure if this question belongs to JSP forum, since it's happening in JSP page I am posting it here.
I am seeing this strange problem, in my JSP page all the link are looking fine except some links in Table header. Here is the code snippet:
<th align="left" width="30%"><html:link action="/myAction.do?sortBy=org&all=${param.all}">Organization Name</html:link></th>
ENV is struts, jstl, html.
Now the problem is the text Organization Name is not visible, although it's there and I can click it. If I click and drag mouse over it I can see it.
Also if I put this link anywhere else e.g. <TD> I can see it.
I am not sure why it's happening.
Please help me.
Abhishek

Sounds like a style issue - is it the same colour as the background for some reason?
What styles have you got applied to your <th> columns? The text in them?
Are you using css?

Personalize link not visible

Hi All,
I am working on EP 7.0
I am unable to see the Personalize link in the portal. Plz provide me the steps on how to show the link.
Points assured.
Regards
Nikhil Bansal

Hi Nikhil,
When you assign the eu_role to all users , then both home tab and
personalise become visible, that is the default behaviour,
To hide the home workset, Content Admin> Portal Content>Portal User> Standard Portal User> Standard Portal User role
Right click the home workset and then change either of the property
like entry point or make it invivsible in navigation.
Regards
Vineeth

"View JNDI tree" link not visible under monitoring tab of myserver?

Hi,
The link "View JNDI tree" as mentioned in chapter 18 of administration guide is
not visibile on my installation of 6.1 beta.
Is there some configuration setting that i need to do to make this link visible.
I am having problems with installation and running of my resource adapter. I wanted
to check whether the JNDI name is registered properly and there i ran into this
problem of no link available.
Regards
Manish

They moved this into a popup menu that you get to using a right click
in the tree view in the left frame. There are lots and lots of new
admin goodies available by right clicking on nodes of the tree. It
took me a while to discover this myself. :)
Ben
On 20 Jun 2001 10:29:12 -0800, Manish Verma <[email protected]> wrote:
>
The link "View JNDI tree" as mentioned in chapter 18 of
administration guide is not visibile on my installation of 6.1 beta.

Info Object not visible in Dimension Reporting

Hallo,
I've created a multi provider which includes 2 infocubes.
I added a new Infoobject to 1 of the cubes and added it into the Identification and also to the Dimensions of the Multi.
Strangely, when I create a query, the Info-object is not shown into the dimension.
Any suggestions?
Regards,
Kurt

Check if the multirovider is active or not and also the infocube. Again check the identification. if every thing is fine, just logout of the system and login again.

User Usage Tracking History Link not visible in Reports

Hi All,
I want to create reports based on user usage login details by using the user usage tracking history link in report section.But presently i do not find the link there.May i know what can be the problem behind this issue?
Thanks in advance,
Manish.

This is only available in historical subject area. If you cannot see this please ask your admin to turn this on within your role.

Link not visible under Table cell

Hi,
Following is my code but doesn't seem to work as expected.
OABulletedListBean bullets =(OABulletedListBean)createWebBean(pageContext, OAWebBeanConstants.BULLETED_LIST_BEAN, null, "bulletList");
OALinkBean link = (OALinkBean)createWebBean(pageContext, OAWebBeanConstants.LINK_BEAN, null, "linkEx");
link.setDestination("OA.jsp?page=/oracle/apps/dem/employee/webui/EmpSearchPG&retainAM=Y");
link.setText("Text of link");
bullets.addIndexedChild(link);
pls. point out the mistake.
Rgds,
Nikhil

Hi Nikhil,
In which method of controller you are writing this code in PR or PFR and second thing have you added your bulleted list region to table cell or not??
Please check.
Regards,
Reetesh Sharma

About Me link is not visible in Welcome Menu if placed on custom location in Custom Master Page

Experts,
I am facing a problem in my -ongoing SP 2013 project's branding. The problem is with Welcome Menu. I need to put the welcome menu at a custom place rather than in ribbon area. for this I added welcome menu snippet inside my Master Page HTML but there is
a problem with it. On ribbon link "About Me" is visible while at the same time link "About me" is not visible on welcome menu which has been inserted on custom place. below images describe my problem more accurately.
I need help in this regard if some one can help me. For your information My User Profiles are properly configured and working.
HBkhan

Hi Haris,
I tested the same scenario in my environment, and the link will display My Settings link instead of About Me link when there is more than one welcome menu in the page.
If you want to put the welcome menu at a custom place rather than in ribbon area, I recommend you remove the welcome menu in the ribbon area(suitebar) after putting the other welcome menu at the custom place.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

I am getting complaints from links that Firefox is already running and needs to be closed when it is not visibly running. But, I do find it as a process that IS running. What gives?

I click on a link in an E-mail. It complains that Firefox is already running and I must close it. Firefox is NOT visibly running. I check via Task Manager to verify. I find Firefox is running as a process. I kill the process and then can proceed. I did use Firefox earlier and closed it.

Make sure that you do not start Firefox with the -no-remote switch or have set the environment variable MOZ_NO_REMOTE=1 (Control Panel > System > Advanced > Environment variables).
If you need to have more than one profile open at the same time then start subsequent instances with the -no-remote command line switch.<br />
You can send links from other programs to a Firefox instance that is started with -no-remote, you need to drag links in a Firefox window in such cases.
See http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

HT4623 I am trying to install iOS 5.1 on my iPad, but when I go to 'Settings' and then to 'General' the link 'Software update' is not visible. Any advice welcome.

I am trying to install iOs 5.1 on myiPad but when I go to 'General' to 'Settings' the link 'Software update' is not visible. Any advice would be welcome.

This feature is only available on iOS 5 or later. You must still be running iOS 4. Connect your iPad to the computer you usually sync with and run iTunes software update.

Can Not send pictures and documents with my webmail, the link is Not visible on Safari Browser

Hello, i can Not send pictures and documents wit my tele2 webmail, the link to so this is Not visible. I tried Safari, Opera, and Dolphin.

Safari doesn't support the attaching/uploading of files. If you want to send documents or photos that you have stored on the iPad then you can use the Mail app - if you've set up your email account on it, then you should be able to start in the app that contains the document, and then use that app's functionality to select the document and attach it to an email e.g. in the Photos app you can use the icon of the box with the arrow coming out of it to select and email a picture

Link is not visible in Z widget

Hi ,
I have created z componenet with , empty view.
added this in my standard wcc_ssv_home,
i can see my widget in UI.
But now i m trying add new z logical link for this. but it is not visible in this new widget box.
Please suggest.
thanks
ram

Works OK here. Got a link to the page online?
You have some unwanted HTML attributes in the code which may already be confusing you.
<body bgcolor="#99C" text="#99C" link="#99C" vlink="#99C" alink="#99C" class="oneColFixCtr">
You're better off getting rid of all the attributes in the <body> tag i.e. reduce it to simply <body> and add styles in the stylesheet.

Forgot your answers? Send reset security info email ..... this link not see in my apple accound pls help

Forgot your answers? Send reset security info email. this link not see in my apple accound pls help i am used another id is alredy located

The send reset link will only show on your account if you already have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you haven't checked whether you have the link then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side of the screen (similar to the screenshot in the second post on this thread) you might see an option below the questions to send reset info to a rescue email address.
If you don't get the link (you won't be able to add a rescue email address until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

Info Link Not Visible in DefaultFileStore filestore provider UCM

Similar Messages

Maybe you are looking for