Info needed about SATA

hi there
Need some specs about SATA & lga 775
Can any 1 help me

You have 4 S-ATA ports on the LGA 775 based boards, supported by Intel IChR6.
They are S-ATA I ports with a teoretical transfer rate of 150 MB/s.
If thats what you were after...

Similar Messages

  • UNIX Executable Files - Additional Info Needed About Zipped Files

    I've tried to go through all of the questions posted so far but each link leads me back to the same three or four discussions.  I have downloaded zipped folders of sound samples.  When they are unzipped the files all have an extra space added just after the extension.  This causes them to be read as UNIX Executable files.  I've discovered the problem but the only cure I've found is to open their info page and erase the space and then confirm that they are aif files.  Is there any way to stop this from happening in the unzip process?  If not is there a method to change these in large groups as opposed to confirming every file one at a time?  I've done about 100 of them but the next folder has 275 files.  Also if the sounds were zipped as stereo files this folder also appears to have separate Left and Right files. I'm not sure if that also could have happened in the file compression process.  The download site has hundreds of folders from different contributors but the file formatting is very consistent.  Thanks for your time.

    Download a renaming application such as "NameChanger."

  • Info needed about PU12 transaction

    Hi,
    I am making modifications in a User Exit which is providing data to a file defined for Interface format ZTE1 through tcode PU12 interface toolbox.
    So, my question is what is this tcode used for ?
    And if my changes include making modifications to the file structure by including extra fields and deleting some,what are necessary steps i need to do to ensure same changes are reflected on PU12 side.
    I hope my question is clear.
    Ask me in case of any doubts.
    Please Guide!!!
    Answers will be rewarded.
    Regards,
    Rohan

    Hi,
    The purpose of PU12 is to create interface format for data export to a third party system.
    The interface format forms the basis for data export. You use the interface format to determine which HR data should be selected and how this will take place.
    You use the interface toolbox to create a program based on the format you have defined. You use this program to export the data.
    You can try this link for improvements in this T Code from 4.5A onwards.
    http://translate.google.com/translate?hl=en&sl=de&u=http://help.sap.com/saphelp_45b/helpdata/de/35/b0ea5187a62488e10000009b38f9b7/content.htm&sa=X&oi=translate&resnum=2&ct=result&prev=/search%3Fq%3DPU12%2B%252B%2Bsap%26hl%3Den
    Reward if helpful.

  • +++           Info needed about a drive for our [very] old floppies.

    I guess what I need is a USB, external floppy drive.
    does anyone know of such an animal ? especially one that reads both the 3" hard and the very oldest 5" soft discs.
    G4 tower, OS 9
    I'm asking this question here, cos the 'very old hardware'
    column only covers thru the power mac and the g3.
    and the knowledge of the writers here seems very deep and
    broad,
    does claris works make a package for os 9 that
    will 'read backwards' all of it's earliest formats?

    a floppy 3 1/2" external USB drive will be no problem to get from a local dealer. I bought two Panasonics in March for £25 each.
    Iomega have one also:
    http://www.iomega.com/direct/products/family.jsp?FOLDER%3C%3Efolderid=31220671&PRODUCT%3C%3Eprd_id=15620507&ASSORTMENT%3C%3Eastid=26890319&bmUID=1152541140207
    I dont know if you will be successfull for a 5 1/4" drive. I had a data recovery company transfer files a few years ago for me as I could not source a drive anywhere.
    There is obviously no machine that can read both sizes.
    G

  • More info needed about using wifi in high reflective enviroment

    I am looking for documents about using wifi in highly reflective enviroments: rooms with aluminium floor, walls and ceiling en very little materials that absorb rf. (cleanroom enviroment)
    Any hints are appreciated.

    Thanks for your reply Mat,
    The cleanroom enviroment (ASML semiconductor industry) is a large room about 30 * 60 meter and 7m high. In this room are smaller cabinets (about 20) where the actual work is done. Here you can see some pictures:
    http://www.brecon.nl/images/brecon_brochure.pdf
    In full production there are about 120 engineers working with their 802.11b/g equipped laptops.
    Every wall, floor, ceiling, door is made with aluminium sandwich panels. We have major troubles getting a reliable wifi enviroment, and also DECT and GSM telefony is hardly working at all.
    Right now we have 10 AP's is the large room, and we are contemplating installing 1 AP in every cabinet with low power setting and using attenuators. We are also considering the use of leaky coaxial cable.
    Migrating to 802.11N is not really an option since the clients are b/g equipped.
    I will upload a plan soon.

  • Try to setup powerdvd 13 and got error for my LG blue-ray about 'SATA HL-DT -ST device'

    i try to setup powerdvd 13 and got error for my LG blue-ray player  about 'SATA HL-DT -ST device' that is not support the program setup. can you help me..?

    What is powerdvd, and what does it have to do with Adobe software?
    A quick google shows that is the product of a different company... you need to contact that company
    http://www.cyberlink.com/store/powerdvd-ultra/buy_en_US.html?affid=2581_1013_80_paidsearch -us_0_1&gclid=COzWlpDVp7gCFadxQgodbhIAmA

  • After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

    After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
    After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
    In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

    Well, I found the solution here in another thread.
    i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
    So I found the solution here.
    Thank you graphicsluc!!!

  • I have one of the original IPOD's and just tried adding a bunch of songs, (200) and now that they're on my computer my ipod won't sync as it now says i need about 8.45 more gb. any thoughts on this?

    I have one  of the oriignal IPOD's circo 2006.  I've got about 150 tunes on it which has been fine but today tried to add another 200 or so and was advised I need about 848 MB to load them.  Is there any solution.  I have 2 playlists.  One with the original 150 tunes and one with the addiitional 200 tunes. Thoughts as now my IPOD won't sync at all and I don't want to delete any of the songs if I don't have to.

    How much storage on the IPOD  -  I have one that has 60GB on it.   Also have an IPOD shuffle that held less songs.
    As your IPOD does not have enough storage for all of your songs, you have to create a list to sync to it that does not exceed the storage size.
    For instance my IPOD shuffle had its only list of songs that did not exceed storage.
    The IPOD gets them all because I only loaded the songs from my CDs that I really liked into ITUNES - leaving out the ones I skipped over.

  • TS1543 my mac wont stop at single user it continues to root, how can i get to single user to enter info needed to reset password

    I my mac wont recognise my password, i have tried to reset password using single user but my mac wont stop at single user it just continues to root, how do i get it to stop at single user so i can add info needed to reset password?

    Are your sure that wasn't a Verbose boot (Cmd-V) you were trying? That would go on to a regular boot.
    Try a PRAM Reset, then try the single user, Cmd-S, at the startup chime. For the PRAM Reset, hold down Option - Cmd - P - R all together until it chimes a total of three times, then let go to finish booting.

  • On those site asking for your name, address, city, email address, this program would put that info where required. All one had to do was type the first letter or number of the info needed. Is this a Firefox program?

    The program would enter info for me. I only had to type the first letter or number of the info needed. For example, my first name is OSCAR. So, to enter this info in the box marked "First name", I only had to type in the box the letter "O". The program would then type OSCAR. I would then click on the name "OSCAR" and the name OSCAR would be entered in the box asking for my first name. Same with "city", "zip code", "last name", "email address", etc. Is this a Firefox feature??

    That feature would be provided by an add-on for Firefox. The most popular add-on of that type was the Google Toolbar for Firefox, which has been discontinued by Google for Firefox 5 and future versions. <br />
    http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
    There are a number of different '''"auto fill"''' add-ons that are available from other developers. Look at this search for one that meets your needs. <br />
    https://addons.mozilla.org/en-US/firefox/search/?q=auto+fill&cat=all&x=0&y=0

  • I bought a used macbook air,  it didn't come with the flash drive to do a factory reset.  Can I download the info needed and save it to my own flash drive and then do a factory reset?  If not what can I do?

    I bought a used macbook air,  it didn't come with the flash drive to do a factory reset.  Can I download the info needed and save it to my own flash drive and then do a factory reset?  If not what can I do?

    If it originally shipped with Mac OS X 10.6.8 or earlier, click here, phone Apple, and order a replacement.
    If it originally shipped with Mac OS X 10.7 or newer, restart it with the Option, Command, and R keys held down.
    (113079)

  • Info needed to produce a Docking Station for iPhone 5

    Hello,
    Where can I get the info needed to produce a Docking Station for iPhone 5?
    I mean technical details (e.g. for Lightning connector) and legal issues.
    Thank you!

    https://developer.apple.com/programs/mfi/

  • "Account Info Needed" and Calendar entries disappear

    This is a side problem in conjunction with the perpetual "Install Update" problem (see here: http://supportforums.blackberry.com/t5/BlackBerry-​Link/10-1-0-4181-won-t-stop-trying-to-load-and-now​...
    The BBQ10 device stops connecting to my desktop Outlook (calendar, contacts, tasks)
    Symptoms:
    Calendar entries disappear after a simple screen refresh.
    "Account Info Needed" keeps repeating.
    When updating the Account, this error appears: "There was an unexpected error and the operation was canceled"
    The only way to temporarily fix this is to delete my account on the device and recreate it. I've done that three times just today. The data comes back fine then disappears again.
    Any tricks on making the account stay put?

    It's been 24 hours with neither of these 2 symptoms occuring.  What did I do? I deselected the "Turn on wireless connections to my computer".
    Wth the bluetooth still enabled, my PC connects to the device as a storage device (which is all I really need for data/file transfer anyway). The Calendar entries are perfect - back and forth.
    I'd be interested in hearing from others if this helped them.  
    (NOTE: the DPC_WATCHDOG_VIOLATION BSOD still happens when the device is connected to the PC for any time longer than the backup or sync. That's an altogether different issue.) 

  • Iphoto needs about 5 minutes to open

    I've made all the upgrades (Iphoto, OS X, ...). My Iphoto Library is a new and nearly empty one (160 photos). Il needs about five minutes to get access to iphoto!

    Do you have a Bootcamp partition? Try dismount it first, then launch iPhoto
    Regards
    TD

  • HT5035 Why is my credit card info needed if I have an iTunes balance?

    Why is my credit card info needed if I have an itunes balance?

    It is part of the Verification process.
    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for