Info needed if replacing iTouch
If I replace my iTouch with a new one will I have any issues getting my apps onto the new one?
I have a few medical apps like; Epocrates, Taber's and Skyscape that I need to make sure are transferable
lllaass wrote:
Syncing will only copy the apps themselves and not data in the apps.
while that is correct, i wonder what kind of in-app data any of the mentioned apps could lose.
those are not game apps where one would want to keep point counts or stats or whatever ...
JGG
Similar Messages
-
I bought a used macbook air, it didn't come with the flash drive to do a factory reset. Can I download the info needed and save it to my own flash drive and then do a factory reset? If not what can I do?
If it originally shipped with Mac OS X 10.6.8 or earlier, click here, phone Apple, and order a replacement.
If it originally shipped with Mac OS X 10.7 or newer, restart it with the Option, Command, and R keys held down.
(113079) -
purchase song on notebook, change info, iCloud syncs with iTouch with old info, i sync then 2 copies on iTouch, can't get rid of old info one. Help? thx
Also, you need to have activated the computer for use with itunes. Why that's not done when you install is a mystery.
Because you don't need an iTunes account tio use or install iTunes.
You cannot authorize the computer until you have an account because that's what you are authorizing.
Note, you can only have 5 active computers, but you can deactivate all of them.
You can have 5 computers authorized at any one time. You can only select Deauthorize all when you do hae 5 authorized and you can only do it one time per year.
Next, create/update your itunes account.
Again you cannot "activate" (which is authorize) unless you have an iTunes account. So you cannot authorize iTunes and then create an iTunes account. -
Hi folks,
Got a replacement iTouch for a two-year old that had an unrelated hardware issue. 3rd generation I believe. Version is 4.3.5. Everything from old one reloaded fine, but have found that the e-mail sometimes loads, sometimes doesn't. When it doesn't, it either perpetually searches for new mail, or sometimes gives the following message:
The mail server ''imap.gmail.com'' is not responding. Verify that you have entered the correct account info in Mail settings.
Could not find anything online that directly addresses this message. Went through all of Apple's instructions (reloading account, ensuring IMAP is enabled, etc) with no success. Safari connection is unaffected.
Everything was hunky-dory with the previous one for e-mail. What's the deal with my new iTouch? Your time is appreciated.
Cheers,
MYou can try deleting the mail account from the iPod and recreating it. However, I suspect there is a problem with your network or Gmail.
-
I need to replace my processors....how?
I need to replace my processors on my G5.
I already purchased the replacement processor, I just need instructions on how to do it.
Can anyone help?Whoever knows how to do a replacement for, please post it here.
Interestingly, I rand the Apple Hardware Test on my G5 (A CD that came with the computer). I ran the Quick and Extended versions. The Hardware Profile tab says I have a 2xPowerPC,G5 @1.8 GHz. So that must mean it's still reading two processors. By the way the fans have been blowing full blast for over an hour while it did these tests. So I restarted and now the darn thing is showing 2 processors (in Utilities=Activity Monitor). What happened? It "fixed" itself???
After starting up and waiting a minute, the G5 froze up. Then I got the gray screen telling me to restart.
I restarted. Then it froze up after I entered my login screen.
I force quit and restarted. Got past the login. Activity Monitor shows 2 processors. Got a dialog box: The computer was restarted after Mac OS X quit unexpectedly. I clicked "Report." Here's what it read:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000073 PC=0x000000000003468C
Latest crash info for cpu 0:
Exception state (sv=0x5D0DB000)
PC=0x0003468C; MSR=0x00001030; DAR=0x00000073; DSISR=0x40000000; LR=0x000347DC; R1=0x446CBD50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x04CE7CC0 0x000347DC 0x00034540 0x000A9714
Proceeding back via exception chain:
Exception state (sv=0x5D0DB000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x00D7D000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x5D0DB000)
PC=0x0003468C; MSR=0x00001030; DAR=0x00000073; DSISR=0x40000000; LR=0x000347DC; R1=0x446CBD50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x04CE7CC0 0x000347DC 0x00034540 0x000A9714
Exception state (sv=0x00D7D000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Model: PowerMac7,3, BootROM 5.1.8f7, 2 processors, PowerPC G5 (3.0), 1.8 GHz, 4 GB
Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
Memory Module: DIMM0/J11, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J12, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM2/J13, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM3/J14, 1 GB, DDR SDRAM, PC3200U-30330
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: usb, usb, SLOT-4
PCI Card: usb, usb, SLOT-4
PCI Card: pcie55,2928, SLOT-4
Serial ATA Device: ST3250823AS, 232.89 GB
Serial ATA Device: WDC WD5000AAKS-00YGA0, 465.76 GB
Parallel ATA Device: SONY DVD RW DW-Q28A
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: PTZ-630, Tablet, Up to 12 Mb/sec, 500 mA
FireWire Device: unknown_device, unknown_value, Unknown
FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec -
I need a replace method for a string buffer
I am not a Java programmer but I have been working with programming languages for a number of years.
What I have is some code that returns a hyperlink into a string buffer and then passes that buffer back to the web page that called it inserting the HTML so the page can be displayed.
I need to replace certain characters in that variable prior to it being handed back to the web page.
I was hoping for a code snippet that would like me do this.
Can someone help?
ThanksI am afraid the syntax is escaling me here.Time to brush up on your Java syntax then.
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com . A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.
James Gosling's The Java Programming Language. Gosling is
the creator of Java. It doesn't get much more authoritative than this.
Can you show me an example of how to incorporate it
on an existing String Buffer?Do you know how to call a method on a String Buffer( Like say append)? Do you know how to do a loop? -
Satelite P200-RT9 - motherboard info needed
Hello,
I have a PSPB6C-RT908C a.k.a Satellite P200-RT9 and I am looking for the motherboard make and model info for my records.
Anyone know this information?
I tried calling Toshiba directly and even they didn't know.Hi
Everything what I can say about this notebook is that this seems to be a Toshiba Canadian notebook model and the Toshiba is the motherboard manufacture.
If you need an replacement or other details then you could contact the authorized service partner in your country.
Regards -
I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?
Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy? -
I my mac wont recognise my password, i have tried to reset password using single user but my mac wont stop at single user it just continues to root, how do i get it to stop at single user so i can add info needed to reset password?
Are your sure that wasn't a Verbose boot (Cmd-V) you were trying? That would go on to a regular boot.
Try a PRAM Reset, then try the single user, Cmd-S, at the startup chime. For the PRAM Reset, hold down Option - Cmd - P - R all together until it chimes a total of three times, then let go to finish booting. -
How do I find out the size of each individual element within a photoshop file as need to replace some elements? Thanks
What do you mean by "Elements"?
Elements in a flat image or Layers?
Could you please post a screenshot with the Layers Panel visible? -
I have an iphone 4s that is over 2 years old. The phone's battery is no longer able to hold a charge for an acceptable length of time. Assuming I need to replace the battery, how much will this cost at an Apple store?
graciebethgrant wrote:
Basically, I'm new to Apple, despite using them before, but I've never actually owned my own.
Since buying this phone off a colleague at work, I seem to be having problems with it. First, I noticed how rubbish the battery life is, then my charger almost went up in flames and thirdly my camera lense is scratched beyond belief.
I know the phone isn't within warranty, although I was lead to believe it was before and during buying it, so basically I'm extremely disappointed with the general make up of iPhone's considering they cost such a **** of a lot of money, you'd think they'd be built to last.
Back to my main point, how much would it cost for a new battery? Or a new camera lense if anyone can help me with that? (I know that the back of the phone was refurbished just before my buying it, so literally just the camera lense)
Thanks!
So basically it sounds like you bought an abused used iPhone and somehow that makes the phone subpar because dispite the abuse it should still last forever and look like new? Batteries don't last forever, even under ideal conditions, so your expectatoins are unrealistic. Take it in and have an estimate done. -
Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help
Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268 -
Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!
Here's the steps to follow if your printer isn't turning on.
If you've gone through all those steps and you still don't have power, there are a lot of places that sell a replacement cord and supply for that printer.
I am an HP employee. -
Need to replace a file in the application server
Hello Experts,
Through ABAP coding, I need to replace a file which is available in the application server from one path to another. I should not use OPEN DATASET, CLOSE DATASET, DELETE DATASET and all as they deal with the data. I need to replace the file with out touching the data of the file.
Could anyone please help.
I heard that i have to use some UNIX script.
Regards,
SudheerSudheer,
Try this...
WITHOUT TOUCHING THE DATA OF A FILE . . .Just Moving the file ( unix commands in abap )
DATA: command(255) TYPE c,
fnam_sour(255),
fnam_target(255).
fnam_sour = '\hme\usr\interface\..... " path of source file
fnam_target = '\hme\usr\interface\..... " target path, where file to placed.
OPEN DATASET fnam_sour FOR INPUT " fnam_sour -> path of source file...
MESSAGE msg IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc <> 0.
< error msg : no file exits>
else.
OPEN DATASET fnam_target FOR INPUT " fnam_target -> path where file to be placed....
MESSAGE msg IN TEXT MODE
ENCODING DEFAULT.
if sy-surc = 0.
CONCATENATE 'mv' fnam_sour fnam_target INTO command SEPARATED BY
space.
CONDENSE command.
PERFORM uxcmd USING command.
endif.
endif.
*& Form UXCMD
FORM uxcmd USING p_command.
**issue UNIX command by calling system function.
DATA: BEGIN OF itab OCCURS 0,
line(255),
END OF itab.
CALL 'SYSTEM' ID 'COMMAND' FIELD p_command
ID 'TAB' FIELD itab-sys.
ENDFORM. " UXCMD
Regards
Ram -
I need to replace the HD on a p7-1206 with a SSD
I need to replace the 2TB system hard drive in a Pavilion p7-1206 with a 120GB SSD. What is the best procedure for transferring the Win 7 OS to the much smaller SSD? I created the recovery disc set. After starting the Recovery Discs to install the OS on the SSD an error message said that SSD capacity was less than the original disc and stopped the install process. Do I need a procedure that will reproduce all 4 partitions on the SSD in working order or can some partitions be ignored?
Thanks for your help.
This question was solved.
View Solution.MusicCity wrote:
... Do I need a procedure that will reproduce all 4 partitions on the SSD in working order or can some partitions be ignored?
Thanks for your help.
Hi,
No, this also won't work. Hope the following tutorial helps:
http://www.overclockers.com/forums/showthread.php?t=670079
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
Why does a JButton automatically have a mouse listener registered with it?
If I instantiate a JButton, I find there's a mouse listener already registered (see code below). Does anyone know why? Looking at the source code for JButton, I can't see how this is. If a create a dummy subclass of AbstractButton (of which JButton i
-
Is there a quick-start guide to creating plugins ?
Hello Adobe Community, I would like to know if there is a guide or something similar that shows how to create a very-very simple plugin (maybe change only one parameter of a layer) ? Right now there is only the SDK.pdf, which isn't the best place for
-
Not given the option to save files hosted on Sharepoint 2010 site.
We have a problem with opening forms on our intranet site. We have hosted some forms which staff will search for in order to fill them in, only the experience is being jilted somewhat by what seems to be a simple issue. When opening a document for re
-
Results recording tab not appearing in QA32
hi, can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?
-
when I download a podcast on my iPhone why is the release date missing? This really screws up the sort order.