Info object for KNUMV

Hi gurus,
Can anybody please tell me what is the info objetc for KNUMV (Number of document condition) based on table KONV .
I need above info object for my 2lis_13_vdkon but it is not there Buisness content..
Thanks.

Akash,
If you are unable to find any info object then create, Zobject based on KNUMV Field properties of KNOV table.
Hope this may help you
Sree

Similar Messages

How to find Info objects for particular filed??

Hi
I hav doubt Can anyone tel me???
My Query s <b>How to find Info objects for particular filed??</b>
For example i hav some table fileds, how to find Info objects for that fields??
Pls explain me detaily
Points wil be given for all answers.
Thanks
Senthil

Hi Senthil ,
You have your field description along with your Field right.
For example:MATNR - Material Number
Now take this description and go to your BW side Tcode:RSA1
1)Search in Modelling >> Infoobjects >> Material Number
Then you get few hits (matches) which have description matched.
For Example: 0material - Material Number
Check for the Length and type match.
You will understand once you get those hits as to which is related to yours.
2)Go to BI content and search in the infoobjects this has all active and inactive objects but this takes a little time (not much though).
3) You have meta data search / simple search also where you can search for the objects with field description as matching criteria.
Hope your doubt is cleared atleast to some extent.
Assign Points if helpful.
Thanks,
Priyanka

How to know corresponding info object for R/3 field and viceversa

Hi....
How to know corresponding object for a filed in r/3 data source and viceversa..While defining transformations.
We can't do mapping of all objects to fields with the definition......!!!
In 'rsosfieldmap'' what information we should give to know the proper tranformation...?
thank u.....

Hi,
There are two ways to know the corresponding info objects in R/3 fields:
1) goto se11 t-code, enter RSOSFIELDMAP and enter display button. in the next screen click contents and give the field name or info object name as per your requirement, and excute.
2) first go through the field description in r/3 and identify the similar description in BI. For your easy understanding use excel sheet , in that you can copy the data source fields and target info objects ( master data or transaction data ). then it will be easy to identify the similar description.
Thank you.

Unable to find info object for J_3ASTAT

hello,
can some one help me find the info object name for the field J_3ASTAT for table J_3ABDBS.

Hi Akash,
To find the BW fields for the corresponding R/3 fields on the BW side use the table RSOSFIELDMAP and also use the table RSOLTPSOURCE.
Hope this helps.
Bye
Dinesh
(Do not forget to assign points!!) ...

Where can I find Standard Info Object for 2LIS_06_INV

Hi
I have a requirement to find out the Standard Content objects for Block reason Qty,Price , Date Changed on,Blocking Reason Order PRice Qnty. Can any one let me know where I can find the 0Objects for this or do I need to create ZObjects ?
Thanks in advance

Hi,
Go to RSA1 and Go to Business Content Tab->In Object Type->Infoobject and Search there and transfer that and install.
or
TO RSA1 and Metadata Res
Search in Infobjects.
Regards,
San!

To change Sequence of info-Objects in Filter dispaly for a 7.0 report

Hi
I have a 7.0 Bex Query.
When I run the report .Click on 'Filter' , I get all the available info Objects for drill down in alphabetic Order .
I know that we can change the Order through 'Query Properties' and tab 'Navigational state'. But it is for that temporary view.
Is there any way to fix the Order/ sequence parmanantly? I dont want to fix it every time I open the report.
Thanks for your inputs.
Nandita..

Hi,
I am assuming you are talking about the order of free characteristics.
By default when you execute the report, they are arranged in an alphabetical order evn though you have arranged them in some other order in the query designer. In 7.0, this can be fixed in WAD.
Go to WAD 7.0 (release 2004s), open the web template created on your query. Then after you open, on the left you can see web items.Under that select 'Navigation Pane' and drag it to layout. Once you bring it in layout, then on the left side under Web item properties look for 'Internal display'.
In 'Internal display' look for in the field navifation pane content select free charcteristics. Then just uncheck the check box named 'Alphabetical Sorting of'. By default it will be On, you just make it Off.
Hope this helps.
Thanks,
rahul

Authorization for info object

hi friends,
i have doubt in authorization. i created authorization object in rrsm, i created roles in pfcg and i need to enter my info object for this authorization, but i am unable to fing my info object in pfcg . how can i get this one. and when i want save my report in roles, can i create roles first and save that report in that role. ple give me clarification
Thanking u
suneel.

so,
i went pfcg , i created some role, some name like zrole, but i didnt find that role name when i was saving my querry in rrmx screen.
in pfcg i need create just role name or can i do any other thing.
today i was trying to create authorization for my one info object, i am not getting my output.
su ppose i have on einfo object M1_ODS , how can i give authorizations.
first businees explorer give authorization relevent
next RRSM create object and can i select radio button for object or cube. and move ur info object
in PFCG create rols and go to authorizations and give manually ur authorization object in (chnage authorization data) and i need create user and assign this user to my role. when i have seen with new use i am getting all bw liek normal when i open bw screen, i didnt find my only object in the new user.
in PFCG menu tab is red that is no problem .
Thanking u
suneel.

Which info object should be used for Financial statement line (BPS and BCS)

Hi experts.
A rather easy and straightfoward questions for someone out there.
In BPS as we know, we use the info object '0SEM_POSIT' (account groups, or financial statement line) to summamrize and store amounts from groups of accounts or for example data from COPA's value fields, and which is already an attribute of the info object '0ACCOUNT'.
I am told that there is another BCS related info object called '0CS_ITEM' that serves the same purpose, and uses it for the same reason for the purpose of consolidations.
We'd obviously like to use just the one of these info objects because of planning and reporting.
Can someone out there with knowledge in BCS recommend which one to use, and from their experience in the past how they combined the use of both (if you in fact did use both).
Also, is it true that in BCS you cannot use a two characteristic BW hierarchy for consolidations, and it can only consolidate a one characteristic BW hierarchy?
Thanks dearly

Hi Eugene,
I kind of understood what you said, but just incase, let me explain my situation a little clearer. In BPS I'm using 0SEM_POSIT for two reasons:
1) To create hierarchy based on 0SEM_POSIT info object, and making each node postable. This is because on this project we don't plan at account level. Only at a kind of account group/financial statement line level. So each node is postable so that they roll up to the higher levels.
2) I will have 0SEM_POSIT as an attribute of 0ACCOUNT (which is standard delivered as an attribute in BW). This will ensure that I derive the actuals at that the same level as the planned. This is required for two reasons:
                           a) I can have the actuals as comaprison column in the Planning
                               layout.
                           b) I can report on the Actuals vs. Plan at the postable node
                               level in BW queries.
So having explained this, what I understood from your explanation is:
a) I can continue to 0SEM_POSIT as my info object for my postable node hierarchy, and
b) I can also use 0CS_ITEM as a consolidation unit specifically for BCS only.
So what I really didn't understand is:
1) your explanation of the mapping of 0SEM_POSIT to 0CS_ITEM, and what this mapping actually does. For example does 0CS_ITEM derive the values from 0SEM_POSIT because of this mapping? Can you explain this a bit? Is Datastream a tool in BCS by which BCS readinf financial data from other components?
2) Can BCS use a 2 characteristic postable nodes hierarchy as a consolidation unit? For example, if I create ONE hierarchy using 0SEM_POSIT, and 0ACCOUNT. Both will be postable at any level of the hirarchy.
Can BCS consolidate using this 2 characteristic hierarchy structure? OR, must it use 0CS_ITEM info object?
3) How does both 0SEM-POSIT, and 0CS_ITEM co-exist together, in terms of planning, consolidation, and reporting. For example if I report using the 0CS_ITEM hierarchy, then I will not be able to read plan data, because plan data is posted on the 0SEM_POSIT? and vice versa......? This question kind of ties in with 1).
Sorry for the long message, but I wanted to make sure I explained it better.
Thanks for your help

What are the standards to write info objects

i appended one structure in BSEG table in r/3 for data source 0FI_GL_4 and through that structure i added some z fields to it . now in bw i have to create info objects for those fields .i created data source in which all fiels are populating correctly only i have to create new info objects for new fileds .i am very new to BI please tell me what standards to follow to create info objects. and also tell me which field fell under char field catalog and which field under key field catalog
i am giving the field names
ZZFUNDNO CHAR 8
ZZGRPOLICY CHAR 15
ZZAGENTNO CHAR 10
ZZTRTYNO2 CHAR 12
ZZCEDAMT CHAR 14
ZZPLANCODE CHAR 6
ZZAGENTID CHAR 10
ZZFOAGNTNO CHAR 10
ZZFOAGNTID CHAR 10
ZZACCIDTYR CHAR 4
ZZDESKCODE CHAR 8
ZZORIGCOMP CHAR 6
ZZORIGACCT CHAR 24
ZZTRTYATR1 CHAR 22
ZZTRTYATR2 CHAR 35
ZZCLAIMNO CHAR 12
ZZADMSYST CHAR 8
ZZAPPROVER CHAR 8
ZZOPERATOR CHAR 10
ZZCHECKNO CHAR 10
ZZCHCKDATE DATS 8
ZZINVOICNO CHAR 12
ZZVENDORS CHAR 12
ZZVOUCHRNO CHAR 12
ZZITEMID CHAR 5
ZZPAYEE CHAR 20
ZZEFTVDATE DATS 8
ZZDESCR CHAR 22
ZZSUBCODE CHAR 4
please help me in this regard

HI,
for creating a Infoobject go through the following link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a63b3e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a63b3e07211d2acb80000e829fbfe/frameset.htm
for your second doubt, the all fields you have mentioned here is Char and DAT data types. So all will be in Character field catelog.
Since mostly keyfigures will have the following data types only.
Amount, Number, Date, Quantity, Integer, Time.
You can use DAT fields as keyfigures but you have to decide that.
rgrds,
v.sen.

Issue in info object creation

Hi All,
While creating info object under info object catalog (for characteristics only but i can able to create for key figure with out any issue)i am getting below error
InfoObject 0LANGU does not exist in version A
Message no. R7245
Pls update me how to solve this issue.
Regards
Ramesh

Dear Ramesh
I think you are getting the issue with Language conversion.
In case you are creating info object for characteristics , always use the SAP standard info object as reference. This will help to avoid this issue. Is it possible to share which reference SAP standard Info object which you are using. ??
Thanks
Amol

Collecting Objects for Transport

Hi,
I have to transport a new cube, few of the info-objects for this cube are already active in QA. Also the application component and infoarea are active in QA. what all should I collect for transport, can someone provide me steps. After going to Transport Connection in RSA1 Ive selected the cube, now it shows me the list containing application component, info area, info objects.. what should I do next.
Thank you,
Sam

Use Option of Only Necessary Objects - Execute - Install
Make sure you give right Package.
Thanks,
CP

How to increase the length of the Info object

Hi All
Any one have idea about how to increse the length of the Info object Char(beyond 60). Can you please explain me in detail we are using BI7.0.
Thanks
Vani

Hello Vani,
You cannot increase the length of an info-object beyond 60 chars.However if you want to store a characteristics data with more than length 60, then you may create separate info-objects
for example: if you need to store 'notes' which might have length more than 60,
then you may create info-objects like notes 1/3 ---store first 60 chars.
notes 2/3 --- store next 60 characters and so on.
Thanx
Priyanka

Datsource /CRMBW/CODEC_TEXT : Need to find Corresponding Info Object

Hi BW Experts,
I just want to identify the corresponding info object for this datasource.
/CRMBW/CODEC_TEXT
Can anyone tell me how to find the corresponding info Objects for this datasource.
Thanks,
shahina

I'm not sure about the /CRM part, but in BI you might want to try 0CODEC.

Type of Budget Entry document info object

hi
what is info object for Type of Budget Entry document

Hi,
Check in following InfoObjects Tables..
RSDIOBJ ---Directory of all InfoObjects
RSDIOBJT ---Texts of InfoObjects
RSDIOBJ ---Directory of all InfoObjects
RSDIOBJT ---Texts of InfoObjects
RSDATRNAV--- Navigation Attributes
RSDATRNAVT--- Navigation Attributes
RSDBCHATR--- Master Data Attributes
RSDCHABAS ---Basic Characteristics (for Characteristics,Time Characteristics, and Units)
RSDCHA--- Characteristics Catalog
RSDDPA-- Data Package Characteristic
RSDIOBJCMP --Dependencies of InfoObjects
RSKYF ---Key Figures
RSDTIM ---Time Characteristics
RSDUNI--- Units
Thanks
Reddy

SORT VALUES IN AN INFO OBJECT

Hi -
I am on BW 3.5, wrote a query in BEX, and displayed in Webpage.
On the webpage, there is an info object for Fiscal Year/Period that when you click on the selection button to drill down the variable, it will display values such as 001/2008, 002/2008, 003/2008, etc.
Users wonder if we can sort these values descending so the latest period will show first?
Appreciate any help.
Thanks, Minh Le

Hi
Right click on your infoobject and select properties.
Sorting - select the option as descending.
Regards
M.A

Info object for KNUMV

Similar Messages

Maybe you are looking for