Info object installation error

Dear Experts,
i am having error while upgradation
2EER7000 "InfoObject 0APO_HOUNIT is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_HUNIT is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_IUNIT is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LADGR is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LGKND is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LGRAD is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LINENO is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LOCNOF is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LOCTYF is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LPPRIO is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LPROD is not" "consistent - activate it" " " " "
when i luking for IO 0APO_LGKND, 0APO_LOCTYF its thr in active mode but in upgradation its giving error.
please tell how to install
InfoObject 0APO_HOUNIT
InfoObject 0APO_HUNIT
InfoObject 0APO_IUNIT
m trying to install from BI content but its not coming in info object tab.
Please help
Ankit

Hi Ankit,
For these infoobjects, in Tocde RSD1, do the version comparison between active and content version.
It might reveal what is the inconsistency.
Thanks,
Krishnan

Similar Messages

Business content info object installation:

Hai gurus,
when i install info object ( omaterial) got an error as:
Version A of DataStore object 0RF_DS02 does not exist
Message no. RSDODSO102

Hi Sampath,
When you try to install any of the Business content, there are some important settings that you should check. This includes,
*Grouping - What are the related objects that should be collected along with your target
*Install - How do you want the installation to be done
*Collection mode - Whether collection should be automatic or not
Please check what type of grouping you have used while you tried to install the specified object.
(NOTE 1: I believe that if you use grouping as "dataflow before" or "only neccessary objects" you will not get this error for Infoobject installation
NOTE 2: This error might have shown since this DSO 0RF_DS02 would have not been installed from BI content yet and would have been collected when you collected the related objects of the 0material with "dataflow after or before and after")
Hope it helps.
Warm Regards,
Preethi R.

Business Object Installation Error code STW00140

Hi Gurus,
During Installation I am getting error
The product keycode you entered is not valid : STW00140
I am installing on XP.
could any one help me?
Thanks in advance
Jack

Try a temporary license key from http://service.sap.com/licensekey
If it works, request for a permanent key at the same location.
Thanks
Subhodeep

0MATERIAL(Info Object) Activation Error from BI Content.

Hello Experts,
0Material activation failed..... for below reasons...
When I am trying to activate 0material from BI Content it is showing errors -
1. Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding.
2. Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
3. Attribute 0CM_CTAR from characteristic 0CM_CDT1 not (actively) available
4Attribute 0CM_SHAR from characteristic 0CM_CDT1 not (actively) available
It is having error messages like point 3 & 4 up to 0CM_CDT7.....
5. Attribute 0CM_CDT1 from characteristic 0RT_SEAROLL not (actively) available
6. Attribute 0RT_SEAROLL from characteristic 0MATERIAL not (actively) available
7. Hierarchy characteristic 0CM_CDT1 of characteristic 0MATERIAL is not active
8. Hierarchy characteristic 0CM_CDT2 of characteristic 0MATERIAL is not active
9. Hierarchy characteristic 0CM_CDT3 of characteristic 0MATERIAL is not active
Please suggest me the solution of this error.
Thanks
Kshitij D.

Hi Ashish,
Thanks for quick reply
0UNIT_DIM & 0AREA_UNIT is active in BI System.
But when I am trying to activate the 0CM_CTAR & 0CM_SHAR then is showing following error.
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
Activation was terminated
Please suggest for the same.
Thank you
Kshitij D.

Error in transpoting info object

Hello,
Need help to solve this please!
I am getting an error while tranporting an info object!
Error 1 with function module RSDRX_FILL_INITIAL_PQTABLE (Fill Master Data)
Message no. R7195
Diagnosis
Possible causes:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me please!
Regards
RAm

Hello,
Help me to solve this !
I cant transport the info object !
It says:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me!!
Regards
Ram

Inactive info Object

I get the following errors when i try to activate an info object ( 0CO_AREA ) which is inactive under my info object tree and within the Business Content.
*+Error deleting document property /BI0/0CO_AREA*+
*Error when deleting document property*
*Error when activating Info Object 0CO_AREA*
*Error when generating master data routines*
**Error when resetting Info Object 0CO_AREA to the active version* "*

Hi
Follow the steps
1. In the infobject menu delete the 0CO_AREA
2.Catch up the infobject 0CO_AREA in Business Content screen and say Install.
3.In AWB-->Modelling, search your infobject 0CO_AREA..and this time it shoul be active..
assign points if it helps..

Error while creating info object

error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALL

Hi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis

Error while activating the info object.

Hi,
While activating one of the info objects, i am getting the following error message:
Characteristic 0BP_GRP: Cannot switch off InfoProvider property
Message no. R7B289
Diagnosis
The characteristic receives master data from other objects (for example, transformations or update rules). Therefore it is necessary to select the characteristic as an InfoProvider.
Procedure
If you want to deselect the Characteristic Is InfoProvider indicator, delete the corresponding objects in the data flow.
Thanks and Regards
Niren.

Hi Niren,
Check the below thread..
Howto Remove 0Employee Char from my InfoArea
Hope it helps..
Regards,
Ramki.

Error in char. Info Object

I have created the char . info object and in attributes gave the same char. and made it as navigational attribute. when i am trying to activate the info objecty i am getting the error
    "Name of the Characteristic is Reserved".
Can nyone plz let me know how to resolve it.

Hi,
   Could you be a bit clearer? If you created a chrarcteristic infoobject and added the same in the attributes then its not possible and wrong.
An attribute must be a different infoobject.
For eg.
CHAR        ATTr
MATID       MATTYPE
You cannot have
MATID as the attribute of MATID.
Regards.

Error in transporting info-object

Hello Experts,
We need to a import an info-object from Quality to Prod.
From Dev to Quality the transport was successful, but while transporting from
quality to prod we are getting the following errors:
Changes cannot be made, display user only
And as a result the info-object and hence the info-object,transfer rules/Transformation etc are
now inactive in the prod. enviornment.
Could anyone advice on what may be the source of this error??
Thanx and Regards
Priyanka

Hi Priyanka,
Pls check below threads, may be it will helpfull to you.
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6720353
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6407281
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6407210
Thanks & Regards,
Ramnaresh .P.

Error while creating Info Object in Info object catelog

Hi experts,
I'm making few info object in info object catelog but while activating system giving error mesage as "Error when generating master data routines"
can any one tell what's the problem and what needs to be done.
Sumantra

Hi
let me know weather r u using any reference object which contain the routinee.
regards,
chandra.

Error when assigning SID while uploading text in the info-object of the DSO

Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.

Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

Error in Transport the info object

Dear all,
i am trying to transport the info object 0CM_CTAR
during transpot i am getting the error as
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
but i checked in development i not got any error but when i am trasport iam getting error.
Regards,
siva.

HEllo,
Please see these OSS Notes
1139547 - Transport of InfoObjects RC = 8
1100575 - InfoObjects: Using units in compounding
The other way is to use a Z* object referenced to needed unit object in the compouding,
Regards,
Shashank

Error while adding an Info Object in an Info Cube

Hi Experts,
I am trying to add one InfoObject to my info cube but I get following error:
"InfoObject GSMBUHR is only allowed as an attribute (not in InfoCubes)"
The Data Type of the InfoObject is TIMS.
The Reference Char. for it is 0TIME
And in other Properties Attribute only is checked.
but its not maintained as an attribute of any InfoObject as I checked in where used list for this InfoObject.
Please let me know to add it in cube.
Regards
Shubh Karan

hi,
u will not be able to add an 'attribute only' info object as characteristic in the cube
it can only be added as an attribute in another master data characteristic. so if u still want to include this info object , u need to unchecck 'attribute only' flag.
hope it helps
Regards,
Rathy

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Info object installation error

Similar Messages

Maybe you are looking for