Info object maintain directly in DSO without Master data .

Hello all,
DSO Activation failing due to invalid characters hence not able to generate SID's during activation .
Note : Special characters should be allowed .
I checked info object settings i.e " Lower case letters is not checked " .
At present no program available to handle these special characters.
No Master data maintainence is possible.
Now please please suggest how to handle these special characters in DSO's .
we are using 7.3 .
Thanks,
Surla

Are you able to reproduce the problem in DEV or QA system?
Transaction RSKC. Copy the contents of the permitted character list into a file and preserve the file for possible future use. Type ALL_CAPITAL in the field (and nothing else.) Try loading and activating the data and see if the problem is resolved. If the problem doesn't go away, restore RSKC content from file and pursue other solutions. If it does go away, discuss with your team and implement ALL_CAPITAL throughout the landscape permanently. Read the below SAP Notes for explanations.
173241 - Allowed characters in the BW System
1075403 - Unallowed characters and ALL_CAPITAL

Similar Messages

Filter on attribute of 0MATERIAL filters charac. values without master data

Hi SAP-Gurus,
I've a problem while executing a query (this query is based on a MultiProvider).
I got the message "Filter on attribute of 0MATERIAL filters charac. values without master data" and I don't know why.
When I don't use the filter on the navigation attribute, the query can be executed without any errors, bute when I set the filter, the warning message comes again.
Thank you all,
Clemens

Dear all SAP Gurus,
we've solved this problem and this is the solution:
The warning is triggered by the method CL_RSDRV_ODS_QUERY-PROCESS_SFC_WITH_ATR when the BExFlag of the InfoProvider is not set. Using DSOs for direct update there is no change to change the BExFlag. As a result queries based on a DSO for direct update always throw the above mentioned warning when filter-characteristics are attributes.
Regards, Clemens

BI-IP WEB characteristic without master data

Hello!
In Bex ready for input query i can use characteristic without master data and then i can insert new values in characteristic key (maintain this characteristic from ready for input query). But when i try use this feature in WEB application i get error messsage about incorrect master data validation. Do you have any idea how use this feature in WEB?
Thanks

Hi,
please be aware that this is called "Master data planning". Master data plannig is not supported in BI-IP although it may work in some cases. As far as I remember somebody posted how this could be done in the Web recently. I remember he used a class to achieve it. I have not tested the approach, but you should find the thread in the forum. Nevertheless you should try to find a "better" approach for generating new master data.
See [Data entry of Character values;
Regards
Matthias Nutt
SAP Consulting Switzerland

GR Doc & GR Slip Printing for materials without master data

We need to print the GR document, GR Slip for materials which doesn't have the master data ( Ex: Materials with long text, material group maintained).
Kindly let me know the requirements for executing this task.

For printing GR slips we need to maintain a few fields in the master data for the material. In case of materials without master data, these fields will not be maintained. So, in this case, how to print the GR Slips is the clarification whcih I would like to have.

Data load stuck from DSO to Master data Infoobject

Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.

Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh.

Maintain output device in user master data

when we try to print the Purchase order smartform we are getting the
following update terminated error message.
" Please maintain output device in user master data".
1. If we maintain output device in my user profile as any printer name
then we are not getting the update terminated error message.
2. when we select the network printer it is always printing
using the output device maintained in the user profile (example
LOCL). it is not printing using network printer.
when we select the network printer it should overwrite the user profile
output device.
Can we have the network printer selected irrespective of the printer
maintained in the user profile?
Please provide the solution
Title was edited by:
Alvaro Tejada Galindo

Hi
If you mention printer as LOCL the system will use network printer and the printer will be controled by Windows.
If you specify printer name the printer will be controled by SAP.
I hope now you can re-analyze your issue.
Regards
Surya.

Maintain number range interval for master data upload for existing employee

Hi Experts,
1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
2) I have the senario where i have to upload master data for new employees.
Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jan 12, 2011 3:49 PM

>
s c patil wrote:
> 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an Internal number range. & then default that Internal number range.
>
> Pls reply ASAP
Yes Mr. Patil...
For existing employees
you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
For new employees
While configuration you can create another number range as internal for new hiring. and use NUMKR feature as well.
Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
Best Regards,
Anand Singh

Maintain SAP ECC (R/3) Master Data with backend validation

Hi,
I would like to maintain SAP ECC (R/3) Master Data via the Visual Composer. As far as I understand the functionality, it should be possible, if the ECC provides a BAPI to do that.
The BAPI must be able to do the same validation that we have, using the backend itself.
Now the question is whether it is possible, that the BAPI returns the result of the validation back to Visual Composer, because of course the user wants to know whether his action was successfull or not (because of invalid values for example).
Does anybody has expierences with such a requirement? Can a BAPI return something to the Visual Composer and how can I integrate such a return result in VC?
Thank you in advance.
Best regards,
Johannes

It is possible to captured BAPI's return parameters in VC.
Steps:
1.Add a Form and BAPI to the story board.
2.Now connect the OUT port of a BAPI to the IN port of FORM , this you can do by
just drag(BAPI Out port) and drop( FORM in port).
3.Add a Expression Box in FORM.
4.Display the values returned by BAPI in the expression box(Use formula)

Can I reuse objects without Master data and load master data into it?

Hai,
I have a standard object that doesnot have Master data. Its already used somewhere else. It matches the name I want but I need to load some master data into it. Does resuing it in my catalogue and loading Master data into it hurt anything? Or should I create a new one?
Thank you.

Hi Visu,
The same InfoObject can be included in more than one InfoObject catalog without any issue. Also loading master data would not hurt an existing InfoProviders where it is being used.
Hope this helps...

Maintain the attributes for the master data-InfoSource

Hi All,
I got the error in the Schedule Process chain were one of my Delta Load-Master Data is not taking data from the source system.For rectifing the error is tried to check the Master data attribute (InfoPackage) in InfoSource. But I am getting the error message as "Attributes are not yet maintained" RSM006. Please provide the solution to the problem. As I want to run the scheduled Process Chain.
Regards,
Rajesh Giribuwa.

Hi,
Welcome to SDN!
In the error message do you see a question mark (or help/explanation button)? Clcick on it and see the system explanation and proposed remedy.
Best regards,
Eugene

Maintain penalty costs in product master data via macro

Hi all,
I am trying to use the function MATLOC_SET to maintain the penalty cost (field Non. Del. Penalty) on SNP1 tab, but it didn't work.
Is it possible to use this function to update this field or I need to use an other function to do this?
I tried :
1) MATLOC_SET( 'NDPEN' ; 123 ; ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION )
2) MATLOC_SET( 'NDPEN' ; '123' ; ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION )
3) MATLOC_SET( 'NDPEN1LOC' ; 123 ; ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION )
4) MATLOC_SET( 'NDPEN1LOC' ; '123' ; ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION )
Thanks in advance,
Regards,
Douglas Marques

Thanks all for replies!
Kishore Reddy,
Yes, it's possible to maintain product master data via macro by functions. In my case, I'm using MATLOC_SET and it's work fine... except for the penalty costs fields.
Saradha,
I can't use the MASSD to do this because the costs are calculated in the macro based on sku/location forecast. But call a custom program in the macro is a good idea. I only have a doubt... Is it possible to transfer the calculated values in the macro to the custom program? If it's possible, how can I do to call the custom program transferring these values?
Julien,
The function MATLOC_SET works fine for other fields, only doesn't work to penalty costs fields...
I saw that the structures are different, but the help that provides by SAP not mention any restriction. So, I think there is some other specific function to update the costs and i tried the MATLOC_EXTRA_SET, but it updates only extra fields...
May be having another function to do this...
Thanks and Regards
Doug

Can i load data directly into DSO without PSA?

hi friends,
can i load data into DSO directly without PSA(without infopackage), if possible ple let me know where can i do that in dtp?
regards
ss

Suneel,
Why don't you try it to see if error DTP is possible with a flat file ds or not?
Or, extrapolate logically -
- An error DTP is based on a regular DTP.
- In any situation where you can have a DTP, why can you not have an error DTP? I would think there would be no reason for this.
At this point of my reasoning I will give it a try to validate if my assumption (DTP possible==>Error DTP possible) is correct or not.
regards,

Is delta possible for DSO from Master Data InfoObject?

Hi,
   I am loading MD Infoobj. from Data Source. Now I have to send the data from MD InfoObject to DSO. Now i need DELTA from InfoObj. to DSO.
    Is it possible? Then how it works? please explain it breafly. My scenario is like,
                                                                                here I need Delta, is it possible?
DS(ECC)--> MD InfoObject--
> DSO
Thank you,
VCREDDY>

Hi,
I think generally if a delta load is done, the changes would be captured in the change log.
What exactly is your requirement?
The way it works is
New record flows from master to dso.
if next, the same object value changes in the master,
in the next load the delete image would come in the dso
and then the new image would come in.
I believe this is the way it works.
Experts can correct me if i am wrong.
Regards,
Joe

Reporting on Time Dependent Master Date Info Provider

Dear All.
We have a info object Employee which is time dependent master data containing all the information with time dependency, when i create the query over this info object it give me the option to select the key date and it show the accurate information which is lying according to the key date.
my requirement is to show all the records in the report which are there in master data but i am not able to show more then one record cause of the key date, can you please let me know how can i show all the records for any given employee id in the query.

Hello Zeeshan,
By standard if you create query directly on time dependent info object, it would display the active records as of the report execution (if no key date has been provided). In any case you can only see one record per the info object key, not the history.
In order to fulfill this requirement, you may need to create infoset on this infoobject and select "date from" and "date to" as part of infoset fields.
Then create bex query on the infoset and drag the "date from" and "date to" also into "rows" section of the query (apart from infoobject key, time dependent attributes). This will let you see the history of changes to time-dependent attributes of the infoobject.
Cheers,
Vasu

Loss Authorization after changing info object

Hi
tHIS is authorization issue
I have DP Planning book and in this planning book I have used Zinfoobject .
This is working fine since go live . Recently I have added new atribute in this zinfoobject .
After that user is not accessible to DP pLANNING Area.
SAYS THAT 'NO Authorization.
Can anybody suggest me

Hi,
Is this Info Object is Std. one?
I assume this info object is created by manually.If you want to change the data type of info object then you need to delete master data of this info object.After that you can change the data type of info object.
But this is the vrey risky steps,so i would suggest try it ones in dev. or sand box server,then go further.
Regards
Sujay

Info object maintain directly in DSO without Master data .

Similar Messages

Maybe you are looking for