Info Object Master Data (0DATETO &0DATEFROM)

Hi,
I created Info Objects with attributes and loaded master data
When i do
Bi Contect Info Object-->Context menu (Maintain master data) -->which show me info object id ,attributes ,  0DATETO and 0DATEFROM
when i checked definiation of info object i can't find the attributes 0DATETO & 0DATEFROM
When i do the same for my Z info object i didn't get 0DATETO
0DATEFROM
Please advise

In the InfoObject Manteinance, under attributes, you have the infoobjects that are attributes of a characteristic
The fifth column, has a flag, which determines if that attribute is time dependent or not.
A time dependen attribute is when for a certain characteristic, such as Customer, you put an attribute, as Customer Classification, and from 1.1.2006 to 1.5.2006 you can say that is Classification A, and then from 2.5.2006 to 31.12.9999 (or until you change it) is Classification B.
Hope it helps..

Similar Messages

  • Effect from build time dependent  2 attribute in info object master data

    Dear all,
    i creat time dependent  2 attributes in info object master data (ZCURRLUM) which use in info cube. after that i open workbook or query, it has short dump which error message
       "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
       "CL_RSBOLAP_BICS_SERVICES======CP" or "CL_RSBOLAP_BICS_SERVICES======CM003"
       "HANDLE_UNCAUGHT_EXCEPTION"
    Question: info object master data can't use more than a attribute time dependent???
    i use in BI 7.0 level 14
    thanks for your help
    regards,
    Joy

    Hi Chandamita Sarmah,
    I copy error code to you from line 1 to line 28
    METHOD handle_uncaught_exception.
      data:
        l_r_program_error  TYPE REF TO cx_rsbolap_program_error.
      data: lBExDebug type rs_bool.
      GET PARAMETER ID 'BEXDEBUG' FIELD lBExDebug.
      if lBExDebug = rs_c_true or CL_RSTT_TRACE=>GET_TRACEMODE_CURRENT_TRACE( ) = rstt0_c_tracem
    Break-point for debugging, e.g. during running a trace
        break-point.  "#EC NOBREAK
      endif.
    Subcall?
      if P_RFC_CALL_DEPTH > 1.
      Forward the exception
        subtract 1 from P_RFC_CALL_DEPTH.
        DATA: l_r_x TYPE REF TO cx_no_check.
        TRY.
           l_r_x ?= i_r_exception.
          CATCH cx_root.
            CLEAR l_r_x.
        ENDTRY.
        IF l_r_x IS INITIAL.
          RAISE EXCEPTION TYPE cx_rsr_propagate_x
            EXPORTING
              previous = i_r_exception.
        ELSE.
        RAISE EXCEPTION l_r_x.
        ENDIF.
      endif.
    All exceptions should have been caugth -> X-Message
    Thanks a lot for your help
    Joy

  • Info-Object Master Data is not populated using Attribute View

    Hi Colleagues,
    I have one info-Object 'Resource', compounded with client, resource type and scenario.
    I want to fill its master data using an attribute view.  In Master data tab, i have mentioned the package and attibute view (SAP HANA MODEL).
    Assigned all the attributes to respective fields in attribute view.
    I can see data using the 'Data Preview' in my attribute view.
    Two issues --
    1. Maintain master data option is disabled in the context menu of 'Resource' Info-Object.
    2. Also the data available in attribute view is not populating in master data of info-Object ( I tried seeing by creating a report).
    Please suggest what is wrong here.
    Thanks in advance.
    Regards,
    Rohit

    Hi,
    When you are loading data from DSO to IO, seems like some filtering is happening. Just check the active table of DSO and make sure that you have all the 59 records available.
    Another important thing is check the primary key of your master data i.e. if there is any compounding attribute if not then records from DSO might be getting overwritten in the master data. i.e. only 6 unique records.
    Regards,
    Durgesh.

  • Master data modified at SQL end not reflecting in Info object master data

    Hi All,
    we have done some data modification at SQl end where the modified data not reflecting in infoobjects master data.
    for example:
    we have split/skills numbers like 1-1000 in the data base and now we did some modifications to that particular split/skills numbers and uploaded that data successfully in the SQL end.now the problem is that modified data is not reflecting in split/skill info-objects and showing the same old data but not the modified one.can you please explain me how to reflect that modified data in BI side.
    regards
    Vamshi D Krishna

    Hi vamshi ,
    what is type of data load to master data infoobject (Full / Delta), if you know the split/skills numbers, try to load with repair full till PSA and check the data. if data is correct you can load to infoobjects and data will be overwrite, after loading data into infoobject -> in RSA1 -> infoobjects-> right and select "Activate master Data" ( this is not a mandatory step, if there is any M and A version data is there that will be adjusted.)  and updated data will be available infoobject master data.
    Regards,
    Daya Sagar

  • Info object as Data type as NUMC, master data doesnot store value as 0

    Hello All,
    I have an Info Object whose data type is NUMC.
    It has only text Master Data.
    Id and its description are the two fields of that Master data.
    Now when below data is feeded in to that infoobject through transformation which has 1 to 1 mapping.
    ID              Description
    0                Submiited
    1                 Approved
    2                  cancelled
    The data gets uploaded in text table but.
    0 ID values turns out to be "       "    blank.
    Which is wrong.
    Result in Text Master table:
    ID                Description
                        Submitted
    1                  Approved
    2                 Cancelled
    if the ID is 0 it should be populated as 0 for "submitted"
    No start routine our end routine is ther in the transformation.
    Kinldy help me to solve this issue.
    Points will be assigned

    Hi,
    When an InfoObject is created it'll have a blank record, in case of Numc it'll be as shown below:
    ID  Description
    0   Blank
    But this 0 gets displayed as blank as well.
    When you post transaction/master data you can post it as
    0 for Submitted
    1 for...
    2 for...
    When you do reporting on this & if you only select text display only it'll display "Submitted", which is required. But if you display ID & text or only ID. It'll display # instead of 0.
    See if you can replace this # with 0.
    Mean while i'll be trying to get this solution. I'll post soon if i get the solution.
    Regards,
    Iliyas

  • Change Info Object Master/Text  data in PROD  to Time dependant

    Hello Experts,
    I have an Info Object used in ODS and Cube. Both ODS and Cube has data in it. The Info Object has Text data.
    I need to change Info Object Text data as Time dependant.
    What are best way to make this change? If I make change to Info Object, how it's going to effect Cube and ODS.
    Please advise.
    Thanks
    Padma
    Padma Reddy

    Bhanu,
    Yes I am selectiong the check box to make IO as time dependant.
    May be I am over complicationg this. Here is my understanding, correct me if I am wrong.
    The IO is used in cube. It belongs to Dimension1. This dimension table is nothing but dim id's and SID's. So the Dimension table is built based on the exist SID values.
    When I make change to IO, the data and SID's will change. Doesn't it cause some data inconsistancy ? And also the IO text table will have multiple rows with the same data but with different validity periods.
    As I said I may be thinking too foolish or technical.
    Please advise.
    Thanks
    Padma

  • How to set the Default values for Info Objects in Data Selection of InfoPac

    Hi All,
    Flat file Extracion:
    How to set the Default values for Info Objects in Data Selection Tab  for Info Package
    ex: Fiscal Year Variant  Info Object having values 'K4' 'Y2' etc  in Flat file
    Initially  default value(not constant)  for this info Object value should be 'K4'  in Info Package
    If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
    Rgds,
    CV

    Hi,
    suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
    haritha

  • Date management on internal object master data

    Hi gurus,
    I need to use a set of dates on the internal object master data. On the date profile customizing there isn't anything that reflecting the management of the dates on products or internal object.
    However, on the web UI (Internal Objects details screen) I found the field "Date Profile":
    - component: PRDHS
    - view: PRDHS/Header
    - context node: PRODSETWTY
    - attribute: STRUCT.TIMEPROF
    This field is not active and I also searched for a set type that could allow me to activate it and to insert a date profile for my internal object without success.
    I'm searching the way to activate this field on the internal object master data and to understand if it's possible to use the date profile on it.
    Your help would be very appreciated.
    Thank a lot.
    Massimiliano.

    Hello,
    There are no date profiles assigned to products in the CRM system, I believe the same is true for internal objects.
    Generally, once a product has been added to an order then the dates from the order/APO system are what are taken into account.
    I have checked into internal objects but the only date I can find reference to is a timestamp:
    http://help.sap.com/saphelp_scm50/helpdata/en/f9/a67937b566ab49e10000009b38f842/frameset.htm
    I have also checked on information on the attribute STRUCT.TIMEPROF but haven't found anything.
    Thanks and regards,
    Ita

  • Multiprovider not taking info from master data table?

    Hi all,
    i've a problem with a multiprovider and some navigational attributes of zmaterial.
    There are several infocubes in the multiprovider and they all have zmaterial, the problem is that the data from one of these cubes is taking the values of some navigational attribute from the cube itself, not from the master data table of zmaterial even if i changed the assignment from the multiprovider.
    Is there any option i must check/look to get this thing work?
    If you need any other info just let me know.
    Thank you.

    Hi,
    It seems the identificaiton are still  incorrect.
    Just try to put the identification for those characteristics from the navigational attribute option in the multiprovider and not from the infoobject present in the cube.
    So for ZMaterial_A it should be identified with ZMaterial_A in the multicube from the respective cubes.
    Thanks
    Ajeet

  • How to load data from info object to ODS

    Hello BW Gurus,
    Is their any way to load data from info object to ODS and I am unable to fine the Info source for that particulate info object master data.
    For ex: we have 0PROFITCENTER as info object which is getting loaded everyday. We want same data in ODS too but I don't find any info source related to this info object to create update ruled.
    Please advise me how to proceed with this,
    Thanks,
    Swathi.

    hi Swathi,
    as mentioned, if you just need the master data text or attribute update, then it's sufficient to load 0PROFITCENTER master data. (don't forget to 'apply hierarchy/attribute change' - rsa1->tools)
    if you are going to update attribute in ods with attribute from 0PROFITCENTER, you can choose look up master data attribute method in update rules.
    if the requirement is really need 0PROFITCENTER to assign to update rules, then first you have to 'generate export datasource' for infoobject 0PROFITCENTER, right click the infoobject and 'generate export datasource', then do 'replicate datasource' from bw myself, after that it will available. to display it you may go to rsa1->infosource, and menu settings->display generated objects.
    hope this helps.

  • Overwrite data of master data infoobject

    Hi all,
    We have one master data infoobject ZASRYHMA. This infoobject does not have any attrbiutes but it has two compounding fields ZSITE and 0DISTR_CHAN.
    Now customer has a requirement in which value of ZASRYHMA can change for a particular site and distribution channel. Generally if this value changes then system creates a new entry in tables /bic/pzasryhma and /bic/szasryhma.
    What they want is to overwrite the existing entry.
    Is it possible to achieve?  It's a master data infoobject.
    Please provide your kind help.
    Regards,
    Nilima Rodrigues

    Hi,
    You have three fields as key field in table as shown below along with values,
    ZASRYHMA     ZSITE         0DISTR_CHAN
    A-1                     B-1            C-1
    A-2                     B-2            C-2
    now if you want to change the value of say second row to
    A-3                    B-2             C-2
    right?
    This is not possible just by overwritting in the info-object master data. Because these are key-fields system will treat A-3 as new value and create new entry, on top of this your A-2 master data values must have been used in transactional data.
    Only way I can think of is to delete the transactional data where ever A-2 is used and then delete ZASRYHMA master data and then upload master data for ZASRYHMA with new values. And then transacional data.

  • How to know corresponding info object for R/3 field and viceversa

    Hi....
    How to know corresponding object for a filed in r/3 data source and viceversa..While defining transformations.
    We can't do mapping of all objects to fields with the definition......!!!
    In 'rsosfieldmap'' what information we should give to know the proper tranformation...?
    thank u.....

    Hi,
    There are two ways to know the corresponding info objects in R/3 fields:
    1)  goto se11 t-code, enter RSOSFIELDMAP and enter display button. in the next screen click contents and give the field name or info object name as per your requirement, and excute.
    2)  first go through the field description in r/3 and identify the similar description in BI. For your easy understanding use excel sheet , in that you can copy the data source fields and target info objects ( master data or transaction data ). then it will be easy to identify the similar description.
    Thank you.

  • Bex Property of Info object doesn't work when Infoset is Used

    Hi,
      When I use Business partner info object ( example 0CRM_SALESP or 0BP_ACTIVIT etc) in a query build directly on a ODS(DSO)  or infocube, the Bex setting "Query Def Filter Value Selection = Only Values in Info provider" defined in the 'Business Explorer" tab of the infoobject, works perfectly. This means that if the info object has 1 Million records in the master data table, but in the transaction data only 100 are involved, when you define a varialble restriction for the info object , in the selection screen the F4 will only show these 100 data as help.
      Although this feature works fine when the query is directly developed ON THE INFO PROVIDER. However when I define a infoset on the same ODS and define  a similar query, the F4 value shows all the data from the master data table instead of the ocurance in the transaction data( info provider)..
      Is there any way , I can get over this issue.
      Thanks
    Arunava

    Hi,
      I guess, I couldn't ecplain the issue properly earlier.
    What I am saying that even though I have the proper setting in the BEX tab ("Query Def Filter Value Selection = Only Values in Info provider")  for the info object , It behaves differently if the query is defined directly on ODS then on the infoset which is built on top of the ODS.
    When the query is build on the ODS the setting works fine
    However when the query is defined on the Infoset, the F4 help get the value from the info object master data.
    My question is , why this two different behaviour for the same info object? And how do I over conme this to get the same bahavious in info set as of the ODS.
    Thanks
    Arunava

  • How can we find out when master data was activated

    Hello Friends,
    We are loading master data for one info object directly from R3 to Info Object without PSA.
    1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
    2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
    Thanks
    Tony

    hi,
    1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
    Ans- yes it give loading details only.
    2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
    ans -in SM37 chk any attribute change run is completed , else in RSA1 Tools -> apply attribute change and hierarchy -> you can see the finished and scheduled job.
    also u can chk the master data table for any M version records is available.
    Ramesh

  • To Join two SAP fields into one info object

    Hi All,
    Can you please suggest the best method to concatenate values from two R/3 fields into one info object master data table?
    The requirement is to create a Sales report where I need to report on sales against  sales type.
    Sales type is a list of joint values of item category ( 0ITEM_CATEG) and bill type (0BILL_TYPE).
    So, I need a list of all item categories and billing types in a single object and report sales value against it.
    Please suggest.
    Thanks,
    Sharmishtha

    Hi Venkat,
    In DSO any case you will not be having more than 16 Keys. I am surprised seeing requirement of more than 16 keys, but anyways you need to go with some workaround.
    You can concatenate multiple Fields and map to one Dummy InfoObject which will be Key in DSO so in actual you have more than 16 Keys but have 16 Keys in system.
    But analyze requirement in detail because this will increase data redundancy and time for load will get increased.
    Also for new issues start new discussion otherwise people will not able to help you in this forum.
    Regards,
    Ganesh

Maybe you are looking for