Info object version M and A do not match
Hi,
For one of my infoobject version Mand A do not match after reactivation from Business content. on forceful activation it gives error that Characteristic 0XXX: Cannot switch off InfoProvider property.
This is characteristic infoobject.
I am trying to run RSRV test but not yet any result.
Message was edited by:
sata babu
can you reproduce the error message
Venkata Devaraj !!!
Similar Messages
-
I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?
JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png 5 KB
averages of 10.vi 9 KB -
# Question
I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version which i understand is unsafe...what to do?That was probably caused by your Firewall blocking the newly installed version of Firefox.
No known security issues with Firefox 3.6.17, which was just released this past week. -
I downloaded the latest version (4) and there are not enymore that little triangle ( last sites) right to BACK/FORWARD button. How i get it back?
You can also get the drop down list by holding down the left button on the until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker -
Accounts and entities do not match data in application OWNERSHIP
Dear experts,
During execution of the legal consolidation package we get the following error:
"Accounts and entities do not match data in application OWNERSHIP"
We have entered the ownership and transaction data.
Could you, please, help us to solve the problem?
Thanks.
MilaThis problem occurs when your Legal application is not in synch with your Ownership.
See below what you have to do to fix this problem.
I am considering you are using BPC for NETWEAVER.
If you are using BPC for Windows, then you gonna have to check some other properties too. ok?
Here we go.
LEGAL APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
USELIM = 1 (if you gonna use US elimination)
VALIDATIONS = 1 (if you gonna use "online" validations entered in Netweaver)
OWNERSHIP APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
After setup web parameters, go to BPC console and check the following dimensions:
(I am mentioning just the ones you need to setup for the consolidation)
C_ACCT
This is your account, and if you are using SAP ECC it should be equal to 0050 accounts of your GL (for example)
In this dimension, you must check the following properties:
ID - NEVER, I repeat NEVER, use lower case letters since BPC is case sensitive.
ALWAYS USE UPPER CASE, FOR EXAMPLE, MY ACCOUNT ID'S ARE: VLD_PL_INV, VLD_PR_INV and so on.....
This is valid for all dimensions or any other ID you gonna create in BPC.
RATETYPE - must setup and must be the ones you gonna use in your RATE application
DIMLIST2 - must use to GROUP your accounts for eliminations or any other automatic adjustment
C_CATEGORY
This is your consolidation categories used to link data you gonna load to your Legal InfoCube.
You must have C_100 for example, for your Actual Version.
You can use the ones that comes with APSHELL C_CATEGORY. It is fine.
C_DATASRC
This is just to TRACK your entries.
Create as many data sources you need and you gonna use.
You can use the ones that comes with APSHELL C_DATASRC. It is fine.
ATTENTION for the following properties:
DATASRC_TYPE - I for input (all the entries, transaction data from txt or ECC) and A for automatic adjustments
IS_CONSOL - Y means that ALL entries in the Legal infocube must be considered for consolidation
IS_CONVERTED - Y means that ALL entries in the Legal infocube must be converted to the GROUP for consolidation
DATASRC_STAGE = Y (allways Y)
ENTITY
ID and PARENTH1 must be entered and must reflect your company hierarchy.
INTCO - inform the associated Inter Company.
CURRENCY - You must inform the currency of the company otherwise IT IS NOT GONNA WORK.
This currency ID must be setup IN ALL the currency dimensions.
In this entity you must enter:
1-All the companies
2-ALL TECHNICAL COMPANIES for the consolidation to work
3-ALL TECHNICAL COMPANIES for VALIDATIONS (if you gonna do you validations thru script logic to
have better control of accounts and values).
ATTENTION:
JUST FOR THE TECHNICAL COMPANIES FOR CONSOLIDATION YOU MUST INFORM Y TO THE ELIM PROPERTY.
Leave it blank for all the other companies.
FLOW - you can use the one that comes with APSHELL
GROUPS
If your version of BPC is 7.0 than this dimension has two objectives.
First Objective - store all the currencies.
All you company data must be loaded with LC currency i.e. in the Legal InfoCube, you gonna see LC in the GROUPS column.
This is you Local Currency, so NEVER delete it.
These currencies must have the following properties setup:
REPORTING - Y for any other currency you insert, X for LC currency, X for Transction Currency.
CURRENCY_TYPE - R for reporting, L just for LC currency, T for the transaction Currency
Leave all the other properties blank!!!!
Edited by: JADIRM on Nov 7, 2010 3:23 AM -
I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks
You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser. -
Reader version listed in GUI does not match that of executable file (again)
I posted regarding this issue before (http://forums.adobe.com/message/4817948), but was never able to find an answer.
Presently I am deploying Adobe Reader 10.1.5 via the MSI installer and group policy. The issue is that a user shut down her Windows 7 computer midway though the MSI installation interrupting (i.e. screwing up) the installation process. I had to delete a few registry entries and reboot the user's PC in order to re-initiate the Reader installation (something I've done in the past).
To verify that Reader was installed sucessfully, I browse to the Reader executable (AcroRd32.exe) in Program Files, double click the executable, select About Adobe from the Help menu, check the version number in the information box and see that the version number is 10.1.4 (i.e. the old version that I am upgrading from). However, when I browse to the Reader executable (AcroRd32.exe) in Program Files and and open the file properties, I see that the version is 10.1.5 (i.e. the new version that I am upgrading to).
So the Reader version listed in GUI does not match that shown in the executable property box.
This is the second time that this has happened with a Windows 7 PC. I've never experienced this sort of thing with a Windows XP PC.
Why is the version number different in the GUI? Where is the version number read in from for the GUI? The registry? Can anybody shed some light on this situation?Let me clarify that the tool posted on http://labs.adobe.com/downloads/acrobatcleaner.html is not the uninstaller for Reader. Instead it is a cleaner tool used for any botched up installation as mentioned above. This utility should only be used in rare circumstances. Instead reader has its own uninstaller which can be used through ARP (Add Remove Programs) in Windows or you can also use the command line "msiexec /x AcroRead.msi" to uninstall Reader.
Thanks,
Vinod -
Storage Breakdown On iTunes and iPhone Do Not Match Up
I will preface this question by providing the following information:
Computer Information
Model: MacBook Pro, mid 2009, 15 inch
Capacity: 1 TB
OS: Yosemite (10.10.1)
iTunes Version: 12.0.1.26
iPhone Information
Model: iPhone 6 Plus, purchased early 1/2015
Capacity: 128 GB
OS: iOS 8.1.2
Okay here's the problem. I was attempting to sync my iPhone 6 Plus with my iTunes library. I have about 50 GB of music which I normally carry around on my iPhone, which amounts to about half of my total storage. On my latest sync, I was told in iTunes that I do not have enough space to complete the sync. Here's what the display looked like:
As you can see:
> The total capacity for audio is displayed as being 49.67 GB (aprox. 6889 songs).
> The total capacity for photos is displayed as being 6.89 GB (aprox. 10,647 photos).
> The total capacity for apps is displayed as being 5.04 GB (aprox. 110 apps).
> The total capacity for other is displayed as being a whopping 45.08 GB.
Upon seeing this, I'm shocked that the other category is taking up so much space. I immediately go to my iPhone to begin trying to eliminate things that could possibly be taking up all this space. When I take a look at my iPhone usage, I see this:
As you can see, the photos and apps are approximately correct, but the songs are way off. In addition, the free space I have on my iPhone according to iTunes is 6.12 GB. According to my iPhone though, I have 47.1 GB (see the screenshot of my iPhone above).
Essentially the storage breakdown on my iPhone and iTunes does not match up. I'm not sure how to fix this problem without restoring the phone, which I want to avoid doing if I don't have to.
Has anyone else had this problem? If so, is anyone aware of a possible solution?
Thanks.If it was an iOS bug I would expect to see it on the 3 devices I have upgraded to iOS 8. I don't see it on any. I would also expect there to be thousands of posts and views about it, as somewhere over 100 million users have updated. This is the only thread I have seen, and you are the only one posting about it.
Go to Settings/iCloud. Turn off Find my iPhone. Then go to Settings/general/reset - Erase all content and settings. Check your "Other". I would expect it to be minimal. -
Reader version listed in GUI does not match that of executable file
I have an interesting situation...
I have Adobe Reader X installed on a Windows 7 desktop. When I go to the Reader installation files right click on the executable (AcroRd32.exe) and open properties, I see that the version is 10.1.4.38 and that the update date is July 28th 2012 (Which is consistent with the Reader X 10.1.4 release date). However, when I double click the same executable file and open About Adobe from the Help menu, the information box that appears states that the reader version is 10.1.3.
So the Reader version listed in GUI does not match that of executable file's properties. Very, very strange.
I am fairly sure that the version stated in the property box is correct, but am not 100% certain. So where is the version number read in from for the GUI? The registry? Can anybody shed some light on this situation?I don't know why you are seeing that, my Adobe Reader 10.1.4 shows this
-
Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?
Movie details
QuickTime Movie
Size: 17.95 GB
Duration 17:39
2 audio channels
Codecs- Linear PCM, Apple ProRes 422, Timecode
Thanks!!You can't use iMovie to create a video DVD - for that you need iDVD:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see. -
Audio and Video do not Sync on movie or TV show playback. Voice and video do not match
I am using the latest version of Itunes and the latest version of Quicktime and Windows 7 on a newer business level computer. On any movie or any TV show I rent or purchase, the video and audio do not match on playback. I have tried uninstalling and reinstalling Itunes, Quicktime and have even reinstalled Windows 7 recently for other reasons. Nothing works. I have to hit pause for a second or two, then it will play OK for a few mins., but the problem returns. Any advice would be most appreciated.
Thanks.See if this article will help:
iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696 -
Still ORA-19007: Schema and element do not match Error
Hi all,
I'm new to XML and dealing with lots of information but I'm stuck with this error ORA-19007: Schema and element do not match. Read some forums and tried some possibitlities but none has solved this issue. I think this is related with some malformed headers definitions but I'm not sure, so any help will be much appreciated.
Here's what I've done so far:
This is the xml file - emp.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2006 rel. 3 sp2 (http://www.altova.com)-->
<employees xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/xdb/emp.xsd">
<employee team="Team Test">
<id>1</id>
<name>Nelson Branco</name>
<comment>No Comments</comment>
</employee>
</employees>
...and this is the XSD file: emp.xsd:
<?xml version="1.0" encoding="ISO-8859-15"?>
<!-- edited with XMLSpy v2006 rel. 3 sp2 (http://www.altova.com) by Nelson Branco (Oracle Corp) -->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="qualified" xdb:storeVarrayAsTable="true">
<xs:element name="comment" type="xs:string"/>
<xs:element name="id" type="xs:string"/>
<xs:element name="name" type="xs:string"/>
<xs:complexType name="employeeType">
<xs:sequence>
<xs:element ref="id"/>
<xs:element ref="name"/>
<xs:element ref="comment" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="team" type="xs:string" use="optional"/>
</xs:complexType>
<xs:element name="employee" type="employeeType"/>
<xs:element name="employees" xdb:defaultTable="EMPLOYEES">
<xs:complexType>
<xs:sequence>
<xs:element ref="employee" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
1) Created folders
declare
ignore boolean;
begin
ignore := dbms_xdb.createFolder('/public/Emp');
ignore := dbms_xdb.createFolder('/public/Emp/xsd');
ignore := dbms_xdb.createFolder('/public/Emp/xml');
commit ;
end;
2) Copied emp.xsd to /public/Emp/xsd in Win Explorer (via WebDAV connection)
3) Registered the schema
begin
dbms_xmlschema.registerURI(schemaURL => 'http://xmlns.oracle.com/xdb/emp.xsd'
,schemaDocURI => '/public/Emp/xsd/emp.xsd'
,genTables => true
commit ;
end ;
4) Copied the xml file to /public/Emp/xml. At this point I was expecting that the xml file was automatically uploaded to corresponding tables based on is content but it didn't happen. I didn't got any error also. When I issue:
Select count(*) from employees
...or
select y."name", y."team" from employees x, table(x.xmldata."employee") y
...got 0 rows returned
5) So then created the table:
create table emp_tab(
id number,
emp sys.XMLType
xmltype column emp
XMLSCHEMA "http://xmlns.oracle.com/xdb/emp.xsd"
element "employee";
6) And tried to insert one record based on the emp.xml:
insert into emp_tab values (1,
xmltype('<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2006 rel. 3 sp2 (http://www.altova.com)-->
<employees xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/xdb/emp.xsd">
<employee team="Team Test">
<id>1</id>
<name>Nelson Branco</name>
<comment>No Comments</comment>
</employee>
</employees>'));
...and that when I get ORA-19007: Schema and element do not match.
Any help on this will be appreciated. Thx.SQL> set echo on
SQL> spool testcase.log
SQL> --
SQL> connect sys/ as sysdba
Enter password:
Connected.
SQL> set define on
SQL> --
SQL> define USERNAME = OTNTEST
SQL> --
SQL> def PASSWORD = OTNTEST
SQL> --
SQL> def USER_TABLESPACE = USERS
SQL> --
SQL> def TEMP_TABLESPACE = TEMP
SQL> --
SQL> drop user &USERNAME cascade
2 /
old 1: drop user &USERNAME cascade
new 1: drop user OTNTEST cascade
User dropped.
SQL> grant connect, resource to &USERNAME identified by &PASSWORD
2 /
old 1: grant connect, resource to &USERNAME identified by &PASSWORD
new 1: grant connect, resource to OTNTEST identified by OTNTEST
Grant succeeded.
SQL> grant create any directory, drop any directory to &USERNAME
2 /
old 1: grant create any directory, drop any directory to &USERNAME
new 1: grant create any directory, drop any directory to OTNTEST
Grant succeeded.
SQL> grant alter session, create view to &USERNAME
2 /
old 1: grant alter session, create view to &USERNAME
new 1: grant alter session, create view to OTNTEST
Grant succeeded.
SQL> alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
2 /
old 1: alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
new 1: alter user OTNTEST default tablespace USERS temporary tablespace TEMP
User altered.
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> alter session set events ='19027 trace name context forever, level 0x800'
2 /
Session altered.
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> --
SQL> begin
2 :schemaURL := 'http://xmlns.oracle.com/xdb/emp.xsd';
3 :schemaPath := '/public/testcase.xsd';
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> create or replace directory XMLDIR as 'c:\xdb\otn'
2 /
Directory created.
SQL> declare
2 res boolean;
3 xmlSchema xmlType := xmlType(
4 '<?xml version="1.0" encoding="ISO-8859-15"?>
5 <!-- edited with XMLSpy v2006 rel. 3 sp2 (http://www.altova.com) by Nelson Branco (Oracle Corp) -->
6 <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="qualified" xdb:store
VarrayAsTable="true">
7 <xs:element name="comment" type="xs:string"/>
8 <xs:element name="id" type="xs:string"/>
9 <xs:element name="name" type="xs:string"/>
10 <xs:complexType name="employeeType">
11 <xs:sequence>
12 <xs:element ref="id"/>
13 <xs:element ref="name"/>
14 <xs:element ref="comment" minOccurs="0"/>
15 </xs:sequence>
16 <xs:attribute name="team" type="xs:string" use="optional"/>
17 </xs:complexType>
18 <xs:element name="employee" type="employeeType"/>
19 <xs:element name="employees" xdb:defaultTable="EMPLOYEES">
20 <xs:complexType>
21 <xs:sequence>
22 <xs:element ref="employee" maxOccurs="unbounded"/>
23 </xs:sequence>
24 </xs:complexType>
25 </xs:element>
26 </xs:schema>');
27 begin
28 if (dbms_xdb.existsResource(:schemaPath)) then
29 dbms_xdb.deleteResource(:schemaPath);
30 end if;
31 res := dbms_xdb.createResource(:schemaPath,xmlSchema);
32 end;
33 /
PL/SQL procedure successfully completed.
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 :schemaURL,
5 xdbURIType(:schemaPath).getClob(),
6 TRUE,TRUE,FALSE,TRUE
7 );
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> var xmltext varchar2(4000)
SQL> --
SQL> begin
2 :xmltext :=
3 '<?xml version="1.0" encoding="UTF-8"?>
4 <!--Sample XML file generated by XMLSpy v2006 rel. 3 sp2 (http://www.altova.com)-->
5 <employees xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation=
"http://xmlns.oracle.com/xdb/emp.xsd">
6 <employee team="Team Test">
7 <id>1</id>
8 <name>Nelson Branco</name>
9 <comment>No Comments</comment>
10 </employee>
11 </employees>';
12 end;
13 /
PL/SQL procedure successfully completed.
SQL> insert into EMPLOYEES values ( xmltype(:xmltext));
1 row created.
SQL> /
1 row created.
SQL> create table emp_tab
2 (
3 id number,
4 emp sys.XMLType
5 )
6 xmltype column emp
7 XMLSCHEMA "http://xmlns.oracle.com/xdb/emp.xsd"
8 element "employee"
9 /
Table created.
SQL> insert into EMP_TAB values ( 1, xmltype(:xmltext))
2 /
insert into EMP_TAB values ( 1, xmltype(:xmltext))
ERROR at line 1:
ORA-19040: Element employees does not match expected employee.
SQL> drop table emp_tab
2 /
Table dropped.
SQL> create table emp_tab
2 (
3 id number,
4 emp sys.XMLType
5 )
6 xmltype column emp
7 XMLSCHEMA "http://xmlns.oracle.com/xdb/emp.xsd"
8 element "employees"
9 /
Table created.
SQL> insert into EMP_TAB values ( 1, xmltype(:xmltext))
2 /
1 row created.
SQL> -
How can i fix a clip when the video and audio are not matching up?
How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.
I would try detaching the audio and the dragging the audio to the left or right until it lines up.
-
i have a samsung hd camcorder. it records at 40 fps, but iMovie will not play the clips at the proper speed and the audio and video do not match up. I have tried to record at standard quality to no avail. Help. thanks in advance.
samsung sc-hmx10c ntsc
im guessing that is the speed it records at due to the fact imovie puts a blue 40 at the top left corner of every clip i import. -
Accounts and entities do not match in application ownership
Hi all,
I'm working on NW 7.5 SP07 (upgrading in SP09 isn't an option at the moment) and when running Consolidation i am getting the error "Accounts and entities do not match in application ownership".
I am very familiar with Consolidation and created consol appsets numerous times, so I am confident I have set up the dimensions correctly (with all the right properties), appset and app web parameters all look ok, business rules are good, ownership and rate data is all in correct place...but no matter what i do i still get this error.
FX, carry-forward and calc accounts all work ok, so it is simply something wrong with the ownership app or with how finance is talking to it.
There was only 1 thread I could find where others had this issue - many people had the same problem and there was never a clear solution to it ..... [Accounts and entities do not match data in application OWNERSHIP;
Any ideas besides upgrading to SP09?
Tom.Hi Tom
Thank you for answer. I found some missing data in my ownership cube and now 'Accounts and entities do not match in application ownership' gone but new error appears after validate script in se38 'GETWA_NOT_ASSIGNED'. Have you ever had this kind of error?
SAP sent me some tasks list but it seems to me that I have all settings they sent in that document.
I have a couple of questions and will be very appreciate if you can answer me.
Are additional members in O_Acct necessary? If I use only METHOD PCON PGROUP POWN in my input schedules.
METHOD_SYS
PCON_SYS
PCTRL
PCTRL_SYS
POWN_SYS
POWND
POWND_SYS
Are you using those above for your consolidation process?
Are you using dynamic hierarchy editor or input schedules to maintain your ownership data?
Regards!
Justyna
Maybe you are looking for
-
My mail app suddenly only allows one window at a time. Any ideas ?
When using mail app I get to work on one window at a time and can not do anything with the app or open another window. this is only on by macbook. Any ideas
-
Adobe Acrobat Pro XI from Private party, Is it an authorized copy?
A private party offered to sell me a copy of Adobe Acrobat Pro XI. How do I tell if it is an authorized copy? How do I register it with Adobe?
-
I have 2 issues. #1 - Bridge crash's upon launch #2 - I cannot install Camera Raw 7.1. I get an "Update Failed" saying "Unable to write at this location: '/Users/MediaServics?library/Application Supposrt/Adobe' Please provide write permissions to thi
-
Is there somewhere i can send my HP R707 Photosmart camera, to see if it can be fixed, it just stoped working tommyo
-
How can i get coloured icons in finder sidebar?
Is there a way to get coloured icons in finder sidebar? The greyscale icons are not really userfriendly ... Thx, Chriz