Info Of SAP BPC 7.5 NW

Dear Expert,
I'm a newbie on SAP BPC 7.5 NW and had a knowledge of SAP BPC 7M before. I found several articles and information about BPC 7.0 NW and never ever touch in BPC NW system, I would like to make sure and maybe more tips from experts. My questions are:
1. BPC 7M have a dimension in excel format for an user enter members, BPC 7.5NW have same format with BPC 7M ? If not, could I know how an user enter members please ?
2. I read some articles BPC 7NW for load data for reports, the first step we must to do that create BPC cube which is data from BW cube. Is it correct or maybe BPC 7.5NW have new features ?
3. Regarding point no 2, Is it correct that data from SAP ECC must be in BW cube first and then create BPC cube for SAP BPC ?
Thanks in advance for your help and information. I really appreciate your help.
Kind Regards,

Hi,
In the NW version also, the members are maintained in the same way in the MS platform.
You can load transaction data from a flat file or from a BI cube or from a file in the application server.
The NW and the MS platforms are very similar with a very few differences.
Please go through the below link from help.sap for further details.
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/bpc_nw_index.htm
Hope this helps.

Similar Messages

Xcelsius in SAP BPC 7.5 MS

Hi experts,
I have a couple of questions with regard to xcelsius in sap bpc 7.5 ms
I am using SAP BPC 7.5 MS AND Xcelsius 2008 sp5.
I already installed the required extended analyzer and EPM connector.
Now here are my questions
1st. I have a file named BPCDATAGRID.XLX, is it the same add ons that mentioned on the HTG? i tried adding this add on but everytime i add this file my xcelsius freeze. in short it was unsuccessful. Could you please teach me or tell me where or how to download the BPCDATA grid that was mentioned in the HTG?
2nd. Since i installed the extended analytic analyzer. im wondering why the function =GetReportDefinition() wouldn't work.
when i check the available functions of IDPrj.AnalyzerFuncs, it includes only two functions, namely AnalyzerOLAPMember and ButtonActionFormattingSheet. Will you please please please teach me how to deal with this.
Thanks in advance.
yajepe

Hi Sorin,
according to the guidlines, SAP posted in the wiki, for connecting SAP BPC to Xcelsius via XML connection I have to connect the XcelsiusService.dll via .NET framework 1.1.4322.
This might not be the correct way anymore, but there is no other guide on how to connect BPC and Xcelsius.
Can you provide info on a other way of connecting BPC to Xcelsius?
Thanks in advance,
Harmen

Best practice to Load FX rates to Rate Application in SAP BPC 7.5 NW

Hi,
What is the best practice/approach to load FX rates to Rate Application in SAP BPC 7.5 NW? Is it from ECC or BW?
Thanks,
Rushi

I have seen both cases.
1) Rates coming as a flat file from external system, treasury department, and ECC and BPC both loads in to respective systems in batch.
2) ECC pushes rate info to BW and data in turn get pushed to BPC along with other scheduled process chains.
How are rates entering your ECC?
Shilpa

Multiple SQL Queries in SAP BPC 5.1 EVMODIFY

Hi All,
We have multiple SQL Queries in Outlooksoft 4.2 which extracts data from Oracle source system with different set of selections and conditions and parameters. We were able to use multiple SQL Queries in Outlooksoft 4.2 using Transform Data Flow Task and paste parameters using evModify dynamic script task, where ever extract to source system is needed.
According to SAP BPC 5.1, all these multiple SQL Queries and extracts by passing parameters will be coded in EVMODIFY dynamic script editor.But, EVMODIFY dynamic script editor is not working with the sets of multiple SQL Queris.It's able to recognize and execute the first SQL Query, but not able to execute from the second SQL Query.
Does any body, did multiple extracts using SQL Queries to the source system by passing parameters using SAP BPC 5.1 data manager and SSIS Packages, please let me know, how you did achieve the above functionality.
Regards,
Sreekanth.

Hi Sorin,
Thanks for your update, I tried declaring the variable between %%....GLOBAL(%GTIMEID%,%SELECTION%) and the package runs now but the problem is that the package is executed using the default date value for the variable GTIMEID declared in the DTSX package and its not taken the date that I'm trying to pass from BPC. As showed below, please if you could take a look to the ModifyScript and see the last line for the global variable and line 13 PROMTP(SELECTINPUT,%SELECTION%,,,%TIME_DIM%) where I am selecting the TIMEID:
DEBUG(ON)
PROMPT(INFILES,,"Import file:",)
PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
PROMPT(RADIOBUTTON,%CLEARDATA%,"Select the method for importing the data from the source file to the destination database",0,{"Merge data values (Imports all records, leaving all remaining records in the destination intact)","Replace && clear data values (Clears the data values for any existing records that mirror each entity/category/time combination defined in the source, then imports the source records)"},{"0","1"})
PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after importing",1,{"Yes","No"},{"1","0"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
INFO(%TEMPFILE%,%TEMPPATH%%RANDOMFILE%)
PROMPT(SELECTINPUT,%SELECTION%,,,%TIME_DIM%)
TASK(CONVERT Task,INPUTFILE,%FILE%)
TASK(CONVERT Task,OUTPUTFILE,%TEMPFILE%)
TASK(CONVERT Task,CONVERSIONFILE,%TRANSFORMATION%)
TASK(CONVERT Task,STRAPPSET,%APPSET%)
TASK(CONVERT Task,STRAPP,%APP%)
TASK(CONVERT Task,STRUSERNAME,%USER%)
TASK(Dumpload Task,APPSET,%APPSET%)
TASK(Dumpload Task,APP,%APP%)
TASK(Dumpload Task,USER,%USER%)
TASK(Dumpload Task,DATATRANSFERMODE,1)
TASK(Dumpload Task,CLEARDATA,1)
TASK(Dumpload Task,FILE,%TEMPFILE%)
TASK(Dumpload Task,RUNTHELOGIC,1)
TASK(Dumpload Task,CHECKLCK,1)
GLOBAL(%GTIMEID%,%SELECTION%)
Do you guess That I am missing something?
Thanks in advanced
Regards

Send parameter from one script logic to another. SAP BPC 7.5 NW.

Hello!
Before i start, want to apologize for my English.
We work on SAP BPC 7.5 for NetWeaver.
In general, we want to send parameter from one Script logic file to another script logic file.
I will explain why :
1. We have parametr like %C_CATEGORY_SET% (and another four parameter, like groups, currency and etc.) that work on one script(next, i will named it A_Script).
       We will send this parametr from BPC EXCEL (we will create button, then use command MNU_eData_SelectPackage(we also set parameters) and run package that we need, also before we set script for this package by the SAP Guide. We send some data, and this A_Script work good. Everything that we want from this script work correctly. )
2. Next we create another script(B_Script) , and we want use %C_CATEGORY_SET%, but we don't know how use this parametr, if we will just write this parametr on Script Logic, apears error ("C_CATEGORYDATAVALUE" is not assigned to the Data Administrator). We try to solve this problem by using System_Constants.lgf, but we get error.
Code:
*DIM C_CATEGORY          WHAT=%C_CATEGORY_SET%;             WHERE=<<<;                   USING=<<<;    TOTAL=<<<
*DIM C_ENTITY                 WHAT=%ENTITYSET%;                         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM GROUPS                   WHAT=%GROUPS_SET%;                    WHERE=<<<;                  USING=<<<;     TOTAL=<<<
*DIM RPTCURRENCY         WHAT=%RPTCURRENCY_SET%;         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM TIME                          WHAT=%TIME_SET%;                          WHERE=<<<;                  USING=<<<;     TOTAL=<<<
If we will change %C_CATEGORY_SET% for ACTUAL, and also change another parameters, script will work, package will run correctly. But we need using parameters, because we didn't exactly what will choose our client.
Our question have BPC Script Logic some kind of Globar Parameter(Variable), that we will set in A_Script, and then use them on B_Script?
How can we define parameter from another script logic, maybe we should send it?
Should we use System_Constants for solving this problem, if yes, how?
Any help will be appreciated
Best Regards,
Erlan Kadraliev
Edited by: Erlan Kadraliev on Feb 8, 2011 4:50 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:58 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:59 PM

Hi Ethan Jewett
1. About %ENTITYSET% it is normal. Before this line i write :
*SELECT(%ENTITYSET%, "ENTITY", GROUPS, "[ID]=%GROUPS_SET%")
So it is not this problem. %ENTITYSET% just parameter, that i used.
2. Are you running the scripts using the same data manager package? I am running two different package for 2 different Script.
For example aPackage for aScript, and bPackage for bScript.
My questions was how can i send parametr from one script to another, for example i can run another script by using BADi command Runlogic, but how can send parameter that i need to used on another script. I have for example parameter %GROUPS_SET% (CG001) on aScript, but i can't get this parameter on another script, if i write %GROUPS_SET% i will get error ("GROUPSDATAVALUE" is not assigned to the Data Administrator)
OR
Maybe if you will answer for next question, i will be able solve problem , How can i send parameter CG001 (this is %GROUPS_SET%, for example it stay in EXCEL in cell A5) from excel to script logic by running package. Maybe i can get cell value on Dynamic Script Data Management?
My Dynamic Script on bPackage
PROMPT(RADIOBUTTON,%CHECKLCK%,"u0412u044Bu0431u043Eu0440 u0431u0430u0437u043Eu0432u043Eu0433u043E u043Fu043Eu043Au0430u0437u0430u0442u0435u043Bu044F.",1,{"u0412u0441u0435u0433u043E u0410u043Au0442u0438u0432u044B","u0421u043Eu0431u0441u0442u0432u0435u043Du043Du044Bu0439 u043Au0430u043Fu0438u0442u0430u043B","u0412u044Bu0440u0443u0447u043Au0430 u043Eu0442 u0440u0435u0430u043Bu0438u0437u0430u0446u0438u0438","u0414u043Eu0445u043Eu0434 u0434u043E u043Du0430u043Bu043Eu0433u043Eu0431u043Bu0430u0436u0435u043Du0438u044F u043Eu0442 u043Fu0440u043Eu0434u043Eu043Bu0436u0430u044Eu0449u0435u0439 u0434u0435u044Fu0442u0435u043Bu044Cu043Du043Eu0441u0442u0438"},{"BPAST_ALL","BPEQ","BPPROCE","BPOPIN_GO"})
INFO
(%EQU%,=)
INFO
(%TAB%,;)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,REPLACEPARAM,CHECKLCK%EQU%%CHECKLCK%%TAB%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,MYTEST_145.LGF)
Best Regards,
Kadraliev Erlan

Data Manager Package Error in SAP BPC 10

Hi All,
I am getting below error message while running the Data manager package /CPMB/LOAD_INFOPROVIDER in SAP BPC 10. Screenshot is attached for your reference. Please help in solving this issue.
Thanks & Regards,
Ramesh.

Hi Vadim,
Please find the Advanced DM Script of Copy Package.
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,%TARGETMODE%)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)
Thanks & Regards,
Ramesh.

SAP BPC doesnt process dimensions, but it shows that was successful

Hello Experts,
We are using SAP BPC 7.0M SP7 with the StarterKit. When we try to process a dimension, it finishes in step 1 of 4, and software says that it was successful, but in BPC Excel we cant show the changes in our dimension, so its not processing anything. Also it doesnt show any info about the process.It also happens in the original IFRS (Application set of the StarterKit), not only in our customized application set.
Any idea about how we can solve it?
Best Regards,
Juan
Edited by: JAnchuelo on Jun 9, 2010 11:31 AM

Hello,
You can take a look at mbrDimension Name within the database to see if it has been added. You can run a query for the member ID to verify that it's been added.
In any event, please let us know.
Regards,
Jason

SAP BPC - Intercompany reconciliation - IC accounts - Input from user?

Dear All,
When doing consolidation(of investments), we need to reconcile IC transactions prior to consolidation process. I believe, there are specific accounts which are specific to IC transactions. These IC related accounts must be identified and used in the business rules during reconciliation process.
My question is:
During requirements gathering, even if I(SAP BPC Consultant) know those IC specific accounts on seeing the chart of accounts, this info./data MUST come from the users as these accounts may vary from company to company. When it is a legal consolidation, it is safer that these inputs are coming from the user and not from the SAP BPC Consultant. This is my understanding.
Is my above understanding is correct? IC related accounts must be an input from users and not expected from SAP CONS. specialist?
Correct me if I am wrong.
Thank you!
Regards,
Peri

Hi Peri,
Different companies use different charts of accounts and the intercompany group of accounts have to be confirmed by customers finance.
Vadim

Minimum H/W to run SAP BPC 7.5 NW

Hi Folks,
I have a question regarding hardware as for the performance testing.
We are currently dealing with performance testing in the early phase of design since the customer wants to see the initial expectation. The client wants to build server for the purpose of performance testing(NOT scalability testing, that is one user test with large amount of records), and want to know minimum size since it is only focused one user testing.
Anyone can tell me what is the minimum size of hardware to run SAP BPC NW?
And few more questions,
1. Is it possible to run SAP BPC with BW and NW in a single server?
2. 1 above is true, what is the step of installation?(Just to provide info to the customer)
3. Any customer to run SAP BPC NW in the cloud environment?
Thanks in advance,
YH Seo

Hi,
Let me try to answer one by one.
1. BPC and BW can be installed on the same hardware. However, if BW is installed on a linux platform, then BPC cant be installed there, because BPC is only supported on windows. Having said this, for the production system, I would suggest you to have the BPC and BW in 2 different systems. It will be better from the performance aspects.
2. You will get all the information regarding the installation from the installation guide available on SAP service market place.
3. Not that I am aware of. the development and quality can be run on a cloud environment. However, I wont suggest the same for the production system.
Hope this helps.

SAP BPC 5.1 with Excel 2007 shows with an error..

SAP BPC 5.1 with excel 2007 does not works instead says when I open sap bpc for excel..
"Cannot download te demesntion list from the server[get server info]".An errror occurs while getting an information from the server the request failed HTTP: STATUS 401:UNAUTHORIZED" COMES IN THE BOX .
Have installed Microsoft.ACE.OLEDB.12.0 provider..still does not works..
Any idea to resolve this..?
Thanks for the help.

Hi patrick
Thanks for help ...
Now its working fine
Regards
Dayalan M

How to use the RateEntity dimension in SAP BPC?

Hello everbody,
I am implementing a consolidation process using SAP BPC. I want to use the RateEntity dimension, to translate a same currency into different exchange rates depending on the company.
I want the company which ID is GFU (which is from Brazil) in LegalEntity dimension is converted using a special exchange rate. I have added a GFU member in RateEntity dimension, and I have entered the exchange rates for the member GFU and for the member Global in RateEntity dimension.
But the problem is that after I run the FX Restatement package, converted data for this company is not the proper one, because Global exchange rates have been used instead of GFU exchange rates. Does anybody know why? Do I have to do anything else?
Thank you very much for your time

Do you see the search functionality in the upper left of the screen?
Okay, now type in ecatt, press enter and in the next screen filter on blogs.

Reports from SAP BPC NW 7.5

Hi All,
Our Landscape:
SAP ECC EhP1
SAP BW 7.10
SAP BOBJ XI 3.1 (WebI/Crystal/Xcelsius)
SAP BPC NW 7.5
We are new to BPC. We would like to know where do we need to develope the reports on BPC data. Can some one help me on this. If some one have any best practices or options that where we can develope the reports, pls let me know
Like we can do reporting directly on BPC with only couple of reports from BW/BOBJ or all reports from BW/BOBJ.
Here we are planning to use BW as warehouse solution and BOBJ tools for reporitng on BW data.
Thanks,
Bala

Hi Bala,
BPC is a planning & a reporting tool. It can also be used for Consolidation. As mentioned in the previous reply, the data in BW has to be made available in BPC Application (cube) to be able to report it out.
You might need to create transformation files and conversions files between your BW cubes and the BPC cubes to realise the data transfer to BPC application (cube). Note, BPC cubes are automatically generated when you create an application from the BPC front end.
Please refer to some good introductory blogs available on SDN to get to know the BPC terminology and BW terms. Then BPC has an reporting tool in itself. You can create reporting using EVDRE for example which displays the data landed in BPC cubes. This typically will have actual data (loaded from BW), plan data (planned through Input Schedules or flat file data loads).
Hope this give some brief idea.
Thanks

SAP BPC MS 7.5 with Extended Analytic Analyzer and EPM connector

Hi experts,
I need your inputs regarding Extended Analytic Analyzer add ins.
I installed the SAP Business Object Extended Analytic Analyzer hoping to integrate the Xcelsius in SAP BPC MS 7.5
I am following the HTG to integrate but got lost.
In EPM connector steps, I cannot find the option from OPERATION TYPE: Retrieve data using Analyzer Report.
The only options available under operation type are
EPM Report
Retrieve Environments
Retrieve Models
Retrieve Dimensions
Retrieve Dimension Members
Input Data
Retrieve Business Process Flows
Retrieve Context
Retrieve Members Property Values
RetrieveText From Library
It doesn't include the option Retrieve data using Analyzer Report.
Im wondering if there are different version of the epm connector? Was my EPM connector differs from the HTG?
And also in Excel under Extended Analytic Analyzer, the function =GETREPORTDEFINITION() is missing
Please help me on this guys..
Thanks in advance.
yajepe

It seems a very good oportunity to use FIM.
FIM was designed especially for exchange data betweeen different SAP product.
FIM will provide an easy way to do the conversion using wizards and also will assure you about data inetgrity and quality.
This will be the way forward but more details has to be define during the implementation.
I hope this will help you.
Kind Regards
Sorin Radulescu

Performance issues with SAP BPC 7.0/7.5 (SP06, 07, 08) NW

Hi Experts
There are some performance issues with SAP BPC 7.5/7.0 NW, users are saying they are not getting data or there are some issues while getting data from R/3 system or ECC 6.0. Then what things do I need to consider to check, such as what DataSources or Cubes I need to check? So, how to solve this issue?
What things I need to consider for SAP NW BI 7.0 u2013 SAP BPC 7.5 NW (SP06, 07, 08) Implementation?
Your help is greatly appreciated.
Regards,
Qadeer

Hi,
New SP was released in February, and now most of the new bugs should been caught ,This has a Central Note. For SP06 it's Note 1527325 - Planning and Consolidation 7.5 SP06 NetWeaver Central Note to fix any issues. Most of the improvements in SP06 were related to performance, especially when logging on from the BPC clients.There you should be able to find a big list of fixes/improvements and Notes that describe those. Some of the Notes even have test description how to reproduce that issue in the old version.
hope this will help you
Regards
Rv

Custom Process Types not working in SAP BPC 10.0

Hi Experts,
We have migrated from SAP BPC 7.5 NW to SAP BPC 10.0 NW.
We have three Custom Process Types created in BPC 7.5NW using the super class CL_UJD_SIMPLE_ACTOR as super class.
It has been made Obsolete and Final class in BPC 10.0NW and the Custom Process types are not running as expected.
Can you please suggest if there is any alternative for using the existing custom process types? Or do we have any alternative for creating custom process types?
*Note: We have tried replacing the superclass with CL_UJD_ACTOR instead of CL_UJD_SIMPLE_ACTOR but of no use.
Regards,
Balraj.

Hi Inl,
The statement looks fine, just confirm:
Your CATEGORY dimension is named CATEGORY? Is it really has property COMPARISOIN?
Can you show the screenshot of UJKT run of script?
What is your core BPC SP?
Vadim

Info Of SAP BPC 7.5 NW

Similar Messages

Maybe you are looking for