Info on creating an MMS video that can be sent as a message.

As you may already know you can send quite a large video if it is sent to an email address but there are more stringent restrictions if you want to send a video as an MMS message.
For messages with a video attached it appears that the maximum size is 1,175,000 Bytes and also only 60 seconds long maximum.  Not to worry, it is easy to do as follows;
Bring up your camera. Touch the camera icon (upper right corner) so it becomes the "video camera" ICON.  Then on the left-middle side of the screen touch the white triangle and then touch the second ICON from the top (looks like a video camera with a reel).  On the screen that comes up touch "Limit for MMS."   Back on the right side touch the red dot and your video will start.   Let it the video run and at the same time read further.
Now here is how you comply with the size 1,175 Bytes and the 60 second rule.  As your video is running notice at the top-left of the screen the seconds are ticking away and at the bottom-left of the screen the number of bytes are also ticking away.  Now, here is why I said not to worry...it's because the video will stop automatically, whether you want it to or not, at 60 seconds.  The only thing you have to do is make sure you have included everything you wanted during this 60 second video.  By the way, to stop the video before it reaches 60 seconds touch the "Black Colored Square Box" that is just below the Red Dot you previously pressed to start the video.
After that you can touch the "Image Viewer" which now is where the the "Black Colored Square Box" was before you pressed it to stop the video before the 60 second maximum OR the video stopped at the 60 second mark.  Also, in a couple of minutes your video will show up in your Gallery.
JerryF

Open the conversation>edit>highlight the audio message>forward->instead of entering a phone number enter your email address. Now, you can download the file like a normal attachment.

Similar Messages

  • How do i create an itunes account that can only download free apps

    how do i create an itunes account that can only download free apps

    Follow the instructions here > Create an iTunes App Store account without a credit card

  • Can I create a PDF document that can be commented on by others using READER

    I have dozens (hundreds?) of PDF Books that I've purchased. Whoever created them made them so anyone using Adobe Reader 5 or better can make highlights and comments on the text.  I use the feature to correct typos and send them back to the publisher. I know it can be done because I've been doing it for a few years before I ever got Adobe Standard.
    So . . . My question is . . . How can I create documents like this that can be commented on using Adobe Reader? I have Adobe Standard 8 and I don't see this as a separate feature of Adobe Pro. and I'm hoping that I'm just missing the instructions on how it's done. I do not have any problem doing what I want using Adobe Standard 8 but I need to be able to make it doable in Reader so others can make comments in my documents.
    Thanks for taking the time . . .
    thehapster

    "Enable Usage Rights in Adobe Reader" or "Extend Features in Adobe Reader"
    are available with Acrobat 8 Professional / 3D version 8 or Acrobat Professional / Pro Extended respectively.
    Additionally, Adobe provides a server based service (LiveCycle ES) that "enables/extends" a PDF such that Adobe Reader can  be used for Comment, Review, Digital Signature, etc.
    That you can use Adobe Reader to comment on PDFs means one of the above applications were used.
    Because you have mentioned the PDFs are purchased PDF Books I suspect that LiveCycle ES was used.
    This server based application (which has a myriad of "modules" available) is expensive so, typically, it is licensed by enterprises that need its functionality. Examples: the large publishing houses or governmental agencies (e.g., IRS).
    If you move up to Acrobat Professional you will be able to "Extend Features in Adobe Reader" such that others can perform Comment & Review on your PDF documents.
    As Acrobat 9.x is the current, marketed release the Professional version would be available to you via an upgrade (not to be confused with the free "updates").
    Be well...

  • I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

    I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

    Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
    If that solution is not flexible enough, consider using the very affordable (12$)  Elements+ add-on which offers a 'meta stamp' script :
    http://elementsplus.net/v5/en/meta-stamp.htm
    Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview...

  • Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached an email back to the sender and a preset admin password would open it

    Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached to an email back to the sender and a preset admin password would open it?

    Hello Graphicsguy123,
    You would need to first create the form ( or Widget in EchoSign) first to generate a url which you can paste it in the email being sent to customers. You would need to make sure you have a Document Cloud Enterprise Premium account in order to create a Widget. If you don't have the account, you can use the trial version to test it. Here is the link:
    Global Trial Registration | eSign services from Adobe
    -Rijul

  • With adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

    with adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

    Hey Paul,
    Please let me know what version of Acrobat Standard are you using.
    Regards,
    Anubha

  • Is there any limit of character that can be sent as body of the mail ?

    Hi,
    we are in exchange 2010 server environment. Is there any limit of character that can be sent as body of the mail ?
    Sankar M http://messagingdevelopment.blogspot.in/

    Hi Munirathinam,
    We can use transport rule and content filtering to implement this function, for example "SubjectOrBodyContains" or "
    FromAddressContains". More details about it, please refer to:
    Transport Rule Predicates:
    http://technet.microsoft.com/en-us/library/dd638183(v=exchg.141).aspx
    Understanding Content Filtering:
    http://technet.microsoft.com/en-us/library/bb124739(v=exchg.141).aspx
    Best Regards,
    Allen Wang

  • What is the maximum number of addresses that can be sent in a group mailing

    Can anyone tell me the maximum number of addresses that can be sent as a group mailing?
    Thanks.

    "Does Mail complain when you try to send a message to several recipients at once? You might be surprised to know that Mail actually has no limit on the number of recipients to whom you can send a message! So, what's going on here?
    Chances are it's your Internet Service Provider (ISP) that's preventing your message from being sent. Your ISP might do this, for example, to deter folks who send unsolicited bulk commercial email (such as "spam" or "Junk mail") to a large number of addresses.
    If this happens to you, contact your ISP and ask them if they enforce a limit on how many recipients each email message can have. If there is a limit, you can either send your message to fewer people, or divide your recipient list into multiple sets and send the same message in batches (each time to a different set of recipients). "
    Brilliant! Thanks.

  • Creating a Sampler bassline that can be triggered by one key?

    Hi all
    I've just found the video on the Apple website that shows you how to convert, say, a beat to a sampler instrument using transient markers. A Sampler instrument is created with ascending MIDI notes that can then be altered.
    I would like to do a similar thing, but put each chopped up bit of what would be a bassline on the same note. I have an electric drumkit, and I would like to be able to trigger the bassline using one of my drum pads. When I hit the pad, I would like the Sampler instrument to advance to the next note in the bassline, so I can essentially play a bassline whilst drumming.
    Any ideas on how I could do this?
    Cheers
    Jonny

    jonathan.townend wrote:
    I have an electric drumkit, and I would like to be able to trigger the bassline using one of my drum pads. When I hit the pad, I would like the Sampler instrument to advance to the next note in the bassline, so I can essentially play a bassline whilst drumming.
    Hi,
    Sorry for the latency... I just created the Environment tool you need.
    It is some kind of step sequencer Macro tool, where you can assign the Drumset triggering note and the LO/HI range target notes. The Macro sequencer steps are determined by the LO/HI range notes.
    Here are the Macro Elements short description:
    1. Trig.Note box - here you set you drum pad triggering note.
    2. *Out Ch.* box - here you set the output midi channel for the bassline software instrument. It is supposed that you use two software instrument instances (one for drums and one for the bassline).
    Example: If you switch Logic to "Live Play Mode" from the Settings>Recording>"Autodemix by midi channel if multitrack recording", then you can assign your original input Drumset to say EXS midi ch.1 Instrument and the Bassline newly converted instrument to EXS midi ch2... In this scenario assign the "Trig Note Out.Ch" (2) to midi ch.2 so the "Trig.Note" drum pad will operate as a keyswitcher and recall the midi Key Range Notes of the bass line channel ( i.e instrument ).
    3. *LO Key Range* box - here you set the low key range of the Bassline Instrument.
    4. *HI Key Range* box - here you set the high key range of the Bassline Instrument.
    5. *Reset Button* - use it to reset the Step sequencer to the "First/LO" key range note.
    6. *Play Triggering Note Button* - switch it ON if want to play/add the original drum triggering drum pad keyswitcher note. Cause it is a keyswitcher by default this button is set to "OFF"! The Trigg. Note is added to its Input Midi channel i.e to the Drum patch software instrument !
    *Note to Keyrange Triggering Tool v1.0* - [DOWNLOAD|http://audiogrocery.com/files/notekeyrange_triggv1.0.zip]
    !http://img7.imageshack.us/img7/783/noteregtrig.gif!
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!

  • How do I create an e-mail graphic poster that can be sent out?

    I need to create an e-mail poster advertisement for a
    recreation area that
    will be sent out to shareholders. I need to do this for work.
    Does anyone
    have any suggestions on how I would do this? Would I create
    the web page and
    then send the web page in an e-mail. I need it to show up
    directly, not
    through an attachment. Also, once created, this will be sent
    out to
    shareholders. How do I save this file to disk in what format
    so that it can
    be sent out by my boss. I am doing this as an
    extra-curricular activity for
    work. Any suggestions would be helpful.
    Thanks
    jmick

    You can open the web page in a browser, select all, copy and
    paste into Outlook. That works. i don't know about other email
    progs.

  • How can you create a button master that can be unlocked but where edits to the master will affect all buttons?

    I'm creating a course calendar (January - December) for an organization and courses are repeated several times throughout the year. I've been asked to create this as an interactive pdf rather than as an interactive Indesign document that can be viewed via a browser, so I'm unable to use multi-state objects
    Anyway, I've created button masters for such buttons such as previous page/next page, course index and search on my master pages, so that's all fine and dandy as I don't need to move these elements. The way I have set up the calendar is that you click on the course name (a button) and a popup (also a button) shows up with a course description - I want to be able to move these popups so that they are the general vicinity of the course name button and not just floating about in the centre of the calendar.
    However, because course descriptions or what is offered in the course change frequently and I am expected to keep the calendar up to date, it doesn't seem efficient to have to manually change every description for a course popup that shows up several times throughout the year or even several times on a month. The issue is that even if I create the popups on the master page, as soon as I unlock them on my month pages and move them to where I want them to be...they'll no longer be affected by changes to the master.
    Is there some sort of function like in html/CSS where you can assign a class to a button or something? Or it is something that Indesign isn't capable of and I will just have to do it manually and try to be careful not to miss any courses when they are updated?
    Any help is appreciated!

    While you could create a different screen for each, a better way to do this is via some form of database.  The buttons cause functions to be executed and the functions utilize data resources based on the selections that are established.
    So if you pick a particular character, a variable is a assigned a value that indicates that.  That variable is then utilized to extract the data associated with the character and to build the screen elements related to the options for that character.

  • Create a PDF file that can be opened in PS

    Hello,
    I a cartographer that is creating a map with thousands of contour lines (among many other layers) in .ai.  Unfortunately, I can't open this map in PS.  PS will think for upwards of 10 hours trying to rasterize this file (and at that point it was about 1/100th converted).  If I turn the contour layer off, PS can open/rasterize the file in a matter of minutes.
    My goal is to open this .ai file in PS and then save it as a .tiff for printing. Does anyone know how to go about doing this?  FYI, I have opened this file in InD and exported it as a PDF, but PS can't open it either.
    Thanks,
    kru

    Hello Larry,
    I have an information plug-in that gets a little more specific.  In all I have 850,000 verticies (2 points and a connecting line segment) which equates to about 5,250 paths.  I can't simplify too much, however, I have simplified the paths 5 x at 99%.  If I try to simplify at just 95% my contour lines will not line up with my streams and valleys.
    Do you know the maximum amount of verticies that can be handled?
    Thanks,
    kru

  • How to create an OS command that can be used in the process chains

    I need to create a command that can copy files from one location to another for a unix machine.
    I have the commands for the unix machine, but need to create a Z customer command so it can be executed in a process chain in SAP

    Hi Again,
    You can use ABAP program in the process chain.
    I guess there are some OS level commands in ABAP which will allow you to open, close, read , write and move files.
    Serach in ABAP help or on net.
    Bes regards,
    Sunmit.

  • How do I create a new Style that can be applied to an object?

    Under the Assets menu there is a tab called “Styles”.  My question is how do I create a new Style that I can apply to an object???  A link to a tutorial or something like that would be useful because I can’t find anything!!!    Thanks in advance for helping me eliminate this frustration!!! 

    KomputerMan.com wrote:
    What I want to do is create a library of styles that are basically pictures of various wood types.
    There are a couple of approaches you could try.
    Clipping paths
    1. Draw the part shape as a closed path.
    2. Position the image of woodgrain above or below the shape where you want it positioned.
    3. Cut
    4. Select the closed path.
    5. Paste Inside.
    See: Using FreeHand MX > Contents > Working with Objects > Working with clipping paths
    Tiled fills
    1. Use autotrace to trace the image of the woodgrain, using plenty of colors.
    Using FreeHand MX > Contents > Using Imported Artwork > Tracing bitmaps > Tracing an image
    2. Group the traced paths (but not the image) and create a tiled fill,
    Using FreeHand MX > Contents > Using Strokes and Fills > Applying attributes to fills > Using tiled fill attributes
    3. Make a style from a tile-filled object
    4. Apply the style to other objects.
    Judy Arndt

  • How should I create a swing UI that can be consumed by a variety of apps?

    Hi,
    I have written a few different swing based java applications that could use a similar user interface class. I would like to create user interface that opens in a popup window, allows the user to do some work, and then returns a resulting object to the parent UI. My needs are too cusomtized to use a standard dialog object.
    So, what is the proper way to build a UI class that can be consumed by other applications? I don't know if I build such a thing in a JFrame, JPanel, etc. Pointers to a specific tutorial would be very helpful. I just want to make sure I can build this as a stand alone project that I can consume by other projects.
    Thanks very much,
    Alan

    For a Swing GUI object which can be shared among several applications, I would use a JPanel. If you want something which pops up and returns an object based on user input, I would use one of the standard JDialog static methods, passing it an instance of this JPanel.

Maybe you are looking for

  • EXPORT IN 10g is not working

    hi Guru's when i am trying to run expdp command i am getting following error [oracle@localhost ~]$ echo $PATH /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/home/oracle/oracle/product

  • XA Exception while invoking the Web Service

    I'm getting the following exception frequently while invoking the webservice hosted in OC4J: -4972682009633467115com.evermind.server.rmi.OrionRemoteException: Transaction was rolled back: Error in transaction: javax.transaction.xa.XAException: Commit

  • No JSESSIONID cookie found in log-in response

    The below code keeps throwing the "No JSESSIONID cookie found in log-in response" Public Sub Establish() If Not sessionId Is Nothing Then Destroy() End If CheckUsernamePassword() Dim req As HttpWebRequest req = WebRequest.Create(GetLogInURL()) req.He

  • Problem in identifying unique records from different tables

    Hello gurus, I am on E-Recruitment module. I order to get more fields in CANDIDATE_ATTR datasource I have enhanced it. I am getting additional fields from HRP5103 (Employer, Employment Start Date & Employment End Date) & from HRP5104 (Institute, City

  • Screen Exit on Me21n

    Hi experts, I want to insert a field for the header part of the ME21n. So I choose the MM06E005 enhancement and I created a project in smod. then I create a field in CI_EKKODB include table , and I double click in 0101 screen and insert that field in