Info on indicator lights for 1250 lwapp radios

Does anyone a link or info regarding what the different led indicators on the lwapp 1250 mean? All I have found so far is the autonomous info
http://cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-chap22-trouble.html#wp1088135

It is going smoothly for the most part. It helps to have a rigger on staff that can drive a boom lift!
here are some pointers on the 1250 radios
The access space for ethernet & console is tight
The wall anchors that ship with the radios are useless, get better anchors and/or molly bolts.
The grid clips are supposed to work with hidden grid ceilings, they were too short for ours, however, you can change out the bolts in the grid clips.
The radios are much heavier than the older 1200 series, so you may need stronger anchors when replacing older 1200 & 1000 series
If you are replacing older lwapp radios and are using the controllers for ap dhcp scope, bump up your scope to allow for more radios. If the old radios are unplugged, they do not gracefully release addresses. The dhcp server on the controller is very limited compared to isc dhcp and you either need to wait or reboot the controller to refresh leases.
I tried cutting the lease times down, but that seemed to cause a lot of disassociations. My solution was to move the mgmt int + both ap-mgmt ints to a 23 bit network from a 24bit network and was able to accommodate 500+ aps. I then split the scope over 2 controllers
when you do a copy & replace in WCS, it does not remove the old radio, you still have to do that.
Do buy the power injectors if you are using 2 radios on an AP.
The radios are fairly sturdy. One fell off a scissor lift that was 12 ft' up and it still works. Can't say the same for the antennae
If at all possible, stage the radios before you mount them. It may save you a trip or two.

Similar Messages

Hp dv7-6b32us model has no indicator light for numlock

Model: Dv7-6b32us, OS: Windows 7 home premium 64bit.
Issue: There is no indicator light that num lock is active or not. Is this a default feature or there is something missing in the laptop?

Since there is no status light on that model, try this software
http://www.whoismadhur.com/2010/07/08/get-status-of-num-lock-caps-lock-keys-on-system-tray-with-tray...
I tried it and it works great. You have to avoid the maze of Freeware they try to download on your computer. Click the link in the text, NOT THE DOWNLOAD Manager.

G500 indicator light works for caps lock, but not for num lock

I have G500 laptop running windows 8.1 64 bit. I have noticed that there is no indicator light for when num lock is on. The light on the front of the computer under the touchpad comes on when caps lock is active, but not for num lock. Is there any indicator for num lock on this computer?

Hi Kimikat730,
Welcome to Lenovo Community!
I’m sorry to inform you that there is no other indicator in G500 Laptop for Num-Lock key.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My blue indicator lights only show under finder. How do I get them to show back under Safari and iTunes when I open them?

I have tried everything to fix this. I am going to restart my computer again and see if that works this time. I have checked every post about this on Apple Support and other sites (not Apple) to no avail. If anyone out there has any idea that will work help me out.
MakBook
MacBook 6, 1
Mac OS X
Snow Leopard
Version 10.6.8
Processer: 2.26 GHz Intel Core 2 Duo
Memory: 2 GB 1067 MHz DDR3
Bus Speed: 1,07 GHz
Not sure what information was really relevant so...
Thanks,
Havoc

Click the Apple in the upper left corner of your screen followed by “System Preferences” from the context menu
Click the “Dock” option to open its preference pane.
Click the checkbox next to “Show indicator lights for open applications” so it is checked.

Dock Indicator Lights Issue

Hi, can anyone link me to the default indicator light files? I deleted them by accident, now I can not see the indicator lights. This Mac version is Mountain Lion. I want the default .png files of the indicator lights for dock. Thank you!

You should probably download the OS X Mountain Lion installer from the Mac App store and re-install your OS.
It's against Apple licensing terms to ad-hoc distribute components of the operating system.

NB202-325BL - Meaning of system indicator lights

I am puzzled and frustrated after about 2 hours of searching the world online I have yet to find any information on the system indicator lights for a Toshiba NB202-325BL. Does anyone know what the meanings are in detail?
For example what does a flashing orange on/off system indicator light mean when the laptop lid is closed and sitting idol?
Thanks in advance.

Hi
The Toshiba NB202 isnt known to me. Do you mean NB200?
Normally you can find some informations in your user manual. There you can find a description for every system indicator light. If you dont have the user manual anymore you can download it on the Toshiba website.
Check this!!!

Minor Keyboard Issue: Caps Lock and Num Lock indicator lights are wrong.

For a few hours, I have been having a small issue with my PowerBook G4 keyboard. The green indicator lights for Number Lock and Caps Lock are indicating incorrectly.
Thus, in order to be able to type lowercase, I must keep the Caps Lock key light on, which subtly annoys the **** out of me [Apple edited out "heck" ]. Num Lock is worse, because I can actually see it; it isn't usually covered by my left hand. Very distracting.
Rebooting did not resolve this issue. Neither did monkeying with the Keyboard system preferences. If I could just turn the lights off altogether that would be fine with me.
This is a recent 15-inch PowerBook G4 1.67 Ghz, with the dual-level dvd burner and (I believe) the internal keyboard is USB, now, instead of ADB as (I believe) many of the older ones had been, so many of those hacks like fkeys and Ucontrol and so on are not options (I believe).
Any ideas? Thanks,
Nick
PowerBook G4 Mac OS X (10.4.4) 15 inch, USB keyboard (I believe).
PowerBook G4 Mac OS X (10.4.4) 15 inch
PowerBook G4 Mac OS X (10.4.4) 15 inch
PowerBook G4 Mac OS X (10.4.4) 15 inch

I finally got it working again, I took the power out and the battery out while it was running. I made sure there were no USB/FireWire/PC-Card stuff connected when I did this. When it booted back up it was normal again.
I also figured it happened because I put in a kyocera EVDO pc card into the laptop while it was in sleep. When it woke back up it went nuts and had to be rebooted several times.

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

iTunes only syncs to Apple devices.
Assuming the media is not DRM protected, any of the media can be dragged and dropped from iTunes onto other drives (external, flash, etc) as the user chooses.

Please add indicator LED light for the HDD and sleep back, add some system hotkey

After Lenovo have announced the new T440 T540，we were shocked by the graphic card: GT720m (game card) and no indicator LED for HDD. At last we need a NVS graphic card to do some grophic related work or mobile business.
So we waited for the new w540, after coming to public we were shocked again there is :
- no indicator LED for HDD, sleep, wift and bluetooth,
- no hotkey to disable touchpad
- no hotkey to sleep
- no turn on/off screen hotkey
- no hot plug for cdrom or second HDD
these are miserable and somehow funny, maybe no indicator for apple is ok as most new macbooks are all SSD
rather than mechanical hard disk.
maybe no led for sleep for apple is ok as Mac OS goes to sleep very quick and they use SSD. But for thinkpads we close the lid and wait for the moon LED light to take thinkpad freely, also for the sake of hard disk rotation. Now we need to look at the power button which is impossible when the lid is closed.
no hotkey for sleep ? some friends said " Fn+4 acts as a suspend shortcut (I think it was added in BIOS 2.05)" , we hope it is ok.
no notkey to off display? no hotkey to disable touchpad? It is really unconvenient
So is there update for these minus? Hotkey may update by the BIOS and driver. Will lenovo do so? After testing well, it will be back really easy to use.
And is there any Modle B for w540 to add LED back ? Missing indicator LED for HDD is nightmare for troubleshooting. Miss sleep indicator in front of Thinkpad(A-Side) is miserable for bringing sleeping w540.
Miss wifi and bluetooth is also unconvenient..... And it is not a very hard work.
Also it is said there is no driver update for fingerprinter reader from AuthenTec, because AuthenTec is bought by Apple?
For thoso who do is really smart but also keep the good previous features,
PLEASE
http://www.notebookreview.com/
https://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W540-Future-Owners-Thread/td-p/1308051/page/6
https://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Received-my-W540-today-First-impressions/td-p...

Today on shutting down the W540, I get the Windows blue shut down screen with the comment:
"Operations are in progress, pleases wait. The machine will be turned off automatically after the operations are complete."
OK, so I waited 20+ minutes.... Mouse logo spinning, but no idea what i/o's are going on. Fast disk access? Slow disk access, intermittent disk access? Or is it locked? CtrlAltDel has no action. Mouse cursor does move.
So did a cold boot/restart (still not knowing what was happening in the Black Box). Must have locked up restarting, as I waited 10+ minutes with NO IDEA what was going on, a REAL "black box".
Cold booted again, and tried a Safe Mode. Worked!, and did a check disk - said not errors????. All OK now.... but WHERE IS THE HD LIGHT!!!!!!!
Now I just cheked, the Dell, ASUS, TOSHIBA, SONY workstations have them..... We need to review this carefully at the R&D level, AND NOT LISTEN TO MARKETING! T'was, my fault for deciding on the W540, I never checked that specification, and just ASSumed all the indicators lights would be there! Now I'm stuck with a $2,500 toy - never feeling secure in the work being done. I need rwo more workstartion, but it will be a nuissance to be on two types of workstations.
When I run my Stat package, it takes sometime 1+hr of analysis, I have no idea if the program is waiting, paused, or locked.... no HD activity light, no heartbeat no idea if I need to reboot, or wait. Maybe it's an act ot terrorism to waste US worker's time ???? <g>

Hi, The computer in my MacBook Pro 10.6.8 isn't showing up in Skype (the indicator light doesn't show and it doesn't show in Skype preferences). Also Photo Booth doesn't recognize a camera. What can I check for please?

Hi, The computer in my MacBook Pro 10.6.8 isn't showing up in Skype (the indicator light doesn't show and it doesn't show in Skype preferences). Also Photo Booth doesn't recognize a camera. What can I check for please?

Hi Lee again..
Please do not startup duplicate topics. I responded to you here > Hi, The camera in my MacBook Pro 10.6.8...: Apple Support Communities
Sometimes navigating the forums can be difficult.. we understand that.

The dock indicator lights look fairly dim on the MBA display, but bright on external displays (LCD TVs for example). Any fixes?

(MacBook Air mid-2012)
As stated in the title, I've noticed the indicator lights on the dock which represent an open/running application looking fairly dim as opposed to the previous dock design in Lion. After a little look around on the internet, there are some others who are having a similar issue, but I've noticed that upon connecting the laptop to external displays (monitors and LCD TVs), they look extremely bright and noticeable on that particular screen.

https://discussions.apple.com/message/19126554#19126554 This thread appears to address the same issue, yet its odd how the dock "raises" if connected to an external display in my case. I'm considering locating the image files used to display the dock indicators and photoshopping them to be brighter.

Indicator light failure on G3 iBook after security update

I use a G3 iBook as second choice for occasional work. Last night after installing the latest Tiger security update I noticed that the indicator light at the front of the book no longer functions. When I put the iBook to sleep I saw there was no little breathing light that's usually going in and out.
Is this inevitably a hardware malfunction or could there be something in the system that might be causing this?

Hi Tom,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
If no improvement...
Have you done a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238
Tried resetting the PMU?
http://docs.info.apple.com/article.html?artnum=14449

Info update Indicator

Hi,
I have a basic querry.
I have created an Material & an Info record (At Pur.org level)
I'm using the std pricing procedure.
Now i have changed the price in the PO and selected info update Indicator and saved the PO.
Now when i create a new PO the system picks the inforecord price instead of the lasr document price.
As per my understanding it should pick the last document price.
Is my understanding wrong or i have missed something somewhere.
Kindly thro me some light.
Regards,
Shakthi.

Hi,
Please check your condition table and access sequence for the purchase order.The price is automatically picked up from the conditions of the condition table by the access sequence.
Regards,
Rambhupal reddy

ISight indicator light on even when no programs are running.

The green indicator light next to the built-in iSight camera is on, even though the only program currently running is Safari. Furthermore this seems to be causing the camera to show nothing but that same shade of green when I open Photobooth. The color settings are set for millions, so I know that's not the problem. Any and all suggestions are welcome.

Hi. First, I suggest you install the most updated software from Apple. Try resetting the SMC as well. Here's the steps:
http://docs.info.apple.com/article.html?artnum=303319
If none of this works, it is possible that you have a hardware issue. Try going to an Apple Store.

Mbp late 2011 battery indicator light question

The mbp will not boot or turn on.
Without being connected to a power source, none of the battery indicator lights come on when I push the little battery indicator light button.
Once I plug in the power cord and push the little battery indicator light button, the very left battery indicator light flashes on and off green.
What does this mean?
I have detached the battery and re-attached the battery adapter to no avail. (Using the following instructions: http://www.spathi.net/tech-support/macbook-pro-wont-turn-on-charge-light-blinkin g-orange/)

If you have AppleCare, they will mail you the battery.
If you do not have AppleCare, call Customer Relations 1-800-767-2775. See what they can do for you. CS will determine if your model MBP qualifies for a free battery.
An Apple Store is not the only place to go. There may be an AASP closer. See KB Article: http://docs.info.apple.com/article.html?artnum=304398 How to find your nearest Apple Authorized Service Provider (AASP)
Another thing you can do is to go to System Profiler. Copy/Paste the Power info here. *Do not post any serial numbers.*

Info on indicator lights for 1250 lwapp radios

Similar Messages

Maybe you are looking for