Info on tape channel when connected with remote instance
Hello,
I'm trying to debug a problem with Backup Exec to do recovery of an instance against a server different from the original one, using command line
and so I'm doing some tests isolating some components to keep the problem general...
Suppose I have a server server_one with Oracle instance TEST and a running listener
Suppose I have another server server_two with tnsnames.ora configured to reach TEST instance.
On server_two I have a dummy instance in nomount, called again TEST and where I set ORACLE_SID=TEST
I run:
$ rman
RMAN> connect target sys@TEST <--- remote
target database Password:
connected to target database: TEST (DBID=1165152943)
RMAN> connect auxiliary / <--- local
connected to auxiliary database: TEST (not mounted)
RMAN> run {
2> ALLOCATE CHANNEL ch0 TYPE 'SBT_TAPE';
3> RELEASE CHANNEL ch0;
4> }
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
The question is about my "allocate" channel above:
Who drives there, the target and so it tries to go remote with the tape in some way or local so it should work, if the local instance/user/oracle installation is configured for tape access?
Thanks,
Gianluca
Ok, stupid me I had to use AUXILIARY in channel specification
ALLOCATE AUXILIARY CHANNEL ch0 TYPE 'SBT_TAPE';
With that, now I correctly get:
allocated channel: ch0
channel ch0: SID=135 device type=SBT_TAPE
channel ch0: Symantec/BackupExec/1.1.0
Thanks anyway...
Similar Messages
-
How do I simulate a right-click in Windows when connected with Remote Desktop 8.0 for Mac OS X?
When connecting to a remote Windows 7 OS from Mac OS X 10.8.5 with Microsoft Remote Desktop 8.0.24091, I'm not able to simulate a right-click with the Apple magic mouse.
On an older version Microsoft Remote Desktop Client version 2.1.1, I can hold down shift+ctl on the Mac and click the magic mouse to simulate a right-click in Windows. With this new version RDP 8.0, I can't find any way to simulate a right-click,
other than to select "Swap mouse buttons" under settings, and then every click is a right-click and then I'm no longer able to left-click (which is even worse). I've tried several key combinations and nothing seems to work. Am I missing
something simple here with the new RDP 8.0 application, or is the right-click simulation not (yet) functional?
Any help is greatly appreciated, thanks!In order to make use of the right-click inside an open session you have three options:
Standard PC two button USB mouse
Apple Magic Mouse: To enable right-click, clickSystem Preferences in the dock, click Mouse, and then enable Secondary click.
Apple Magic Trackpad or MacBook Trackpad: To enable right-click, click System Preferences in the dock, click Mouse, and then enable Secondary click.
Extracted from "Remote desktop Client on Mac: FAQ"
http://technet.microsoft.com/en-us/library/dn473006.aspx -
IPod touch 4G with interferance on 1 channel when connected in my car
I have an iPod touch 4G with interferance on 1 channel when connected to my VW Golf (2009) using VW cables and a RNS510 stereo system. I can only listen to it if the balance is full left channel! Tried it in another car and it is fine. Tried my sons 2G touch in my car and that is fine. VW say the stereo is fine? I used the same settings as the VW technician's iPod his was OK and mine wasn't. Any ideas how to fix this?
ThanksTry turning off your iPod and turning it back on. It might Help.
-
Error while making connection with remote oracle database
Dear,
I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
DriverManager.getConnection(
"jdbc:oracle:thin:@erp:1521:ORCL", "apps",
"apps");
Pls any body have idea.
Thanks.Thanks for support.
Below is error which i am getting while making connection with remote database.
C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
-------- Oracle JDBC Connection Testing ------
Where is your Oracle JDBC Driver?
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:186)
at OracleJDBC.main(OracleJDBC.java:13)
Advice. -
Error message (-3256) appears when connecting to remote speaker
An error occured when connecting to remote speaker. An unknown error occured (-3256).
ANy help would be most appreciated. Thank you.I get the same message and have been stuck with this for weeks since upgrade to iTunes 8, now running 8.02 and did a firmware upgrade on airport express to 6.3 but still no joy...anybody got any other ideas ? I'm about to give up and move to sonos
-
I am curious as to why my iTunes 10.4 won't open when connected with my Touch (v.4.3.5). iTunes used to open when connected with my Touch. Can anyone help me? Thankyou.
I have got a solution, it was shared on another 'apple support coummunity' board:
https://discussions.apple.com/message/15830348#15830348
It worked for me -
My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged -
I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?
Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
When connecting with FaceTime, I see other people then they hang up.
When connecting with FaceTime, I see other people then they hang up. Has anyone one else encountered this?
Usually, my wife contacts me with facetime, I try to accept connection and she sees other people form another country that quickly hang up.
This happens often.
ThanksThis seems to happen with the Iphone 5s if I am not mistaken
Thnaks -
Can't open app store in itunes when connected with ipad
Hi. Could anybody tell me how I can use app store in itunes when connected with ipad 2? When I click app store, it just gives no response at all. Thanks a lot!
Welcome to the Apple Community.
Do you have the power cable in, it won't show up with the power cable in.
Additionally, there have been some issues with the update servers, it's possible you won't be able to complete the update procedure anyway. -
Why isn't my iPad2 charging its battery when connected with my iMac?
Why isn't my iPad2 charging its battery when connected with my iMac?
A lot of computers, especially older ones (I don't know how old yours is), don't provide enough power through their USB ports in order to charge the iPad - it may still be charging, but at a low rate (it may charge quicker if the iPad's screen is off). If you want to charge it at a reasonable rate then the wall charger is better.
-
Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help
Hi!
It looks like there might be some security settings or software on your laptop that's preventing the restore process from working.
Check out this article in Apple's support. It shows you the steps you can take to try to get around error 1611.
Like diesel vdub said, a DFU-mode restore might give you success where a regular restore might not, so maybe you can try that.
What you need to do is put your phone into DFU mode, which is a low-level mode that helps the restore process get a little more done, or it can help iTunes get around certain roadblocks (hopefully like the one you're experiencing!). Your computer will install special DFU-iPhone drivers for it, and then iTunes will see it as a phone that needs restoring.
To get your phone into DFU mode:
Plug your phone into your laptop.
Turn the phone off.
Press and hold the power/lock button. Keep it held in, even after the display turns on and you see something on the screen. As soon as you see something on the screen, start holding the home button as well as the power button, so that they're being pressed together.
Keep both buttons pressed down for 10 seconds.
After 10 seconds, release the power button, but keep holding home until the laptop sees a new USB device. Once you see that, you're in DFU mode, and you can let go of buttons. Your iPhone screen will be blank during it all, even though it's actually on, in DFU mode.
Now your restore should work!
If your phone shows the Apple logo or anything else while you're trying to get it into DFU mode, then something went wrong. Try the steps again. If it suddenly starts up normally again, try reducing the time to a bit less than 10 seconds--try reducing it by about a second at a time. It should work! -
Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge
I have reached the same conclusion in the mean time. I have done a bit of investgation in to other grahics cards and am seeing some that show SPDIF connections from the card to the mother board. I was not familar with SPDIF but it did a little bit of sluething. It is of course a digitally enconded voice. I am guessing that in that case the mother board ( assuming it supports this hardware option) would use this output and be able to translate that digital audio to its other audio outputs. That is a lot of guessing of course. I think my "solution" might be a whole new desktop - a rather drastic course of action! I was in the proceess of getting ready to upgrade this machine anyway with a new graphics card (which I will now return), go to Win 7, and maybe even a new digital TV reciever, and I don't want to throw good money after bad anyway.
Thanks for your comments -
Will not recognize the Lucid LG when connected with USB
My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?
That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport -
the resolution of my thunderbolt screen is not ok / sharp when connected with my air book. Who can help me out?
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.
Maybe you are looking for
-
I want to list all of the connectors on a board on a vi front panel (e.g. J1, J2, etc...). If the user clicks on e.g. J1, all of the pins on J1 will be displayed, like when using a treeview. The user will then be able to select multiple pins from J1
-
Oracle R12 on Windows Server 2008
Hi - does anyone have a good guide or link to a site that does a walk through of installing Oracle R12 on Windows Server 2008? Thanks!
-
After reinstalling CS4 my serial number is now 'invalid'
I reinstalled CS4 on my MBP to sort out some stability issues. When prompted to enter the serial number, I did. This is a valid educational serial number obtained legally and properly. It has been working for several years now and I have reinstalled
-
Can't downgrade 10.5 to the original 10.4 on MacBook
Hi there! I've upgraded my MacBook that came with 10.4 to 10.5. Now I wan't to "downgrade" to 10.4 as 10.5 isn't running as smoothly as i had hoped on the Book. (I love it on my iMac 24" though) Problem: I can't ! I started by saving my files and era
-
I cannot log in to my Bank of America account. The website says that my cookies are disabled but they are enabled. What is the problem?