[info only] 2.6.33.3-2 nvidia-96xx freezes - errors

I started noticing some strange freezes in Stumpwm today.  At first I suspected stump since I just started using it recently but then kde did the same thing upon reboot. The system would start freezing for a while, lockup (no keyboard input), graphics display would appear corrupted, etc. Investigating the logs I found:
May 11 17:11:06 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 0c2c ff000000 0000fde8 ff000000 ff000000
May 11 17:11:07 arch-desktop kernel: NVRM: Xid (0001:00): 13, 0000 01019700 00001796 00000c28 00ed0000 00000800
May 11 17:12:42 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 1ffc ffffffff 0000f000 ffffffff 00000000
May 11 17:13:12 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 1ffc ffffffff 0000f000 ffffffff 00000000
May 11 17:16:48 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 15f8 ff040404 0000ee40 fff4f5f8 ffffffff
May 11 17:23:26 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 1ffc ffffffff 0000fdfc ffffffff ffffffff
May 11 17:27:25 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 1ffc ffffffff 0000f000 ffffffff 00000000
May 11 17:27:33 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 1ffc ffffffff 0000f000 ffffffff 00000000
May 11 17:29:11 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 01f4 00d2e1f6 00000f68 00000000 00d2e1f6
May 11 17:30:22 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 14f4 fff4f4f4 0000f000 fff4f4f4 fff4f4f4
May 11 17:32:24 arch-desktop kernel: NVRM: Xid (0001:00): 8, Channel 00000000
May 11 17:32:29 arch-desktop kernel: NVRM: Xid (0001:00): 6, PE0000 0000 ffb5101d 0000f000 ffa10000 ffc03f3d
May 11 17:33:54 arch-desktop kernel: NVRM: Xid (0001:00): 8, Channel 00000000
May 11 17:34:04 arch-desktop kernel: NVRM: Xid (0001:00): 8, Channel 00000000
May 11 17:34:16 arch-desktop kernel: NVRM: Xid (0001:00): 8, Channel 00000000
May 11 17:34:28 arch-desktop kernel: NVRM: Xid (0001:00): 8, Channel 00000000
After considering things I decided to simply switch back to Nouveau from nvidia-96xx.  I've yet to see the problem reoccur yet since doing so.  I will update if it does.  I only started getting these errors in the logs after having these problems.  Investigating past logs show that they have never appeared before as far as I can see.
Some hardware and config  info:
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000] (rev c1)
Linux arch-desktop 2.6.33-ARCH #1 SMP PREEMPT Sun May 2 08:21:02 UTC 2010 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux
Recently upgraded the kernel but I rebooted a few days ago and did not notice this before:
[2010-05-09 20:25] upgraded kernel26-firmware (2.6.33.3-1 -> 2.6.33.3-2)
This isn't a big deal to me as I prefer using nouveau anyway but I wanted to share this because I would not be surprised if others see it.  Just a little info for anyone who runs into this and does a search on these errors....

Thought I had better follow up on this in case someone relied on this information.  The problem reoccurred this morning with the Nouveau driver.  Upon investigating I found two blown (gapping holes, leaking) capacitors on the Nvidia card.  This might also be related to previous system instability which I have been experiencing the last few months (I was unable to find evidence of capacitor issues on the motherboard itself).  I'm using a backup video card at this time.

Similar Messages

  • Show view options/Show item info - only half working

    Used to be that all my photos in a folder showed the dimension under the name. Now, even tho I do:
    Show view options/ and check Show item info, only some of them have the dimensions. And what's really funny is that the portrait oriented pix have the dimensions, but the landscape oriented are missing the dimensions. What's going on here?

    must've recently done something to the Landscape ones...
    actually, the workflow I mentioned was applied to only one folder of pix, both port. and lands., but now, even other folders are affected, ones that I didn't run the workflow on. If I go to iPhoto, export some pix from last year to a folder (saved to anywhere), same results, port. have the dim.s below, landscapes do not.
    And now for something completely diff... So I have a folder of pix on my desktop I just imported from iPhoto. I see dim.s under the port.s, none under the land.s. I open a lands. with preview. I rotate ccl, then clockwise (back to original orientation, right?), save, close preview. There it is in the folder WITH the dim.s under it. What kinda ghost have I got here?
    Just to mention, I bought a Touch. It launches iPhoto when I attach it to my MBP (so it can sync the saved photos, only when I have some on the Touch). Don't know if that has anything to do with anything. Tx 4 th response, BD.

  • Technical Info (only visible for developers) ORA-01403:

    My Apex was working fine, but now when I create any application, and try to modify any record I face following error....???
    Technical Info (only visible for developers)
    is_internal_error: false
    ora_sqlcode: 100
    ora_sqlerrm: ORA-01403: no data found
    component.type: APEX_APPLICATION_PAGE_PROCESS
    component.id: 3049630242871846
    component.name: Fetch Row from SL_AUTONUMBER
    error_backtrace:ORA-06512: at line 1 ORA-06512: at "SYS.DBMS_SYS_SQL", line 1815 ORA-06512: at "SYS.WWV_DBMS_SQL", line 1064 ORA-06512: at "SYS.WWV_DBMS_SQL", line 1090 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 832 ORA-06512: at "APEX_040200.WWV_FLOW_DML", line 551 ORA-06512: at "APEX_040200.WWV_FLOW_PROCESS", line 333

    The reason of  getting 'No data found' error..
    In Table Primary Key is Cust_Code which contain data like ('13/1', '13/2'........ and so on)
    If I remove '/' from data and use the flat numbers like 1,2,3......and so on, then there is no error.
    But my data consist of with '/' , which is my requirement, how can i handle this type of data.......????

  • Content has been indexed with Info only. Resubmit should only be performed

    Hi All,
    Im using the Oracle Content Server (OCS) , When im trying to checkin new document then i get the below mentioned error message can any one plz tell me that what is the problem.
    Error Message:_
    Text conversion of the file failed.
    Content has been indexed with Info only. Resubmit should only be performed if the problem has been resolved.
    Text conversion of the file '//awusrp04/PortalStg/oracle/inetucmstg/weblayout/groups/public/@enterprise/@hr/documents/document/s_013020.pdf' failed.
    **Content has been indexed with Info only. Resubmit should only be performed if the problem has been resolved.      **

    Hello Experts,
    I am Facing the Same Issue, anybody know the solution for the same?
    Thanks in Advance.

  • ACE : Alternate configuration for NCI-TYPE-INFO only

    Hi,
    Is there a way to configure redirect type NCI-TYPE-INFO only - on the ACE devices ?
    I need this functionality to redirect the traffic when the servers at the primary site are down and the clients still hit the content at site 1
    The CSS config is
    service 1
    ip address a.a.a.a
    active
    service 2
    ip address a.a.a.b
    active
    service site2
    ip address Y.Y.Y.Y(Vip address of the remote site)
    type NCI-INFO-ONLY
    active
    content
    vip X.X.X.X
    add service 1
    add service 2
    primarysorryserver service site2
    active
    source group redirect
    vip address X.X.X.X
    add destination service site 2
    active
    and similar configuration at Remote CSS.
    Thanks in Advance.
    Raj

    Something like this should do
    rserver Site1-Server1
    ip address a.a.a.a
    inservice
    rserver Site1-Server2
    ip address a.a.a.b
    inservice
    rserver Site2-Server
    ip address Y.Y.Y.Y
    inservice
    serverfarm host Site1-SF
    probe ICMP
    rserver Site1-Server1
    inservice
    rserver Site1-Server2
    inservice
    serverfarm host Site2-SF
    probe ICMP
    rserver Site2-Server
    inservice
    policy-map type loadbalance first-match APP1-policy-map
    class class-default
    serverfarm Site1-SF backup Site2-SF
    nat dynamic 1095 vlan x serverfarm primary
    interface vlan x
    ip address
    access-group input ANYONE
    nat-pool 1095 x.x.x.x x.x.x.x netmask 255.255.255.0 pat
    service-policy input VLANX-VIPS
    no shutdown
    Syed Iftekhar Ahmed

  • HELP ! Audio won't load.  itunes grabs (imports) cd track info only

    re: an ipod mini on a winXP system. Used this mini just fine on a win2000 box. That box died, am now on an XP system. its an older computer (pentium I, 256 RAM)but is up to date with service pack 2 and all the critical updates. Installed itunes 7.
    Now the mini won't work with itunes. Put cd in and itunes loads up the track info but wont take the audio part. ipod syncs up the playlist info as displayed in itunes with no audio. CD's add to the library as track info only without the audio. Had itunes v.4 on there before v7 and had the SAME PROBLEM so dont think its a version issue.
    ANY SUGGESTIONS TO FIX THIS? HELP PLEASE - THANKS!
    windows   Windows XP Pro   256 RAM - sp2 + updates

    hi scottymac!
    header; iTunes.exe - No disk
    There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR5.
    hmmm. actually, i've had
    b mixed
    results when trying to fix this one, and you're actually the first person who's reported only getting it
    b some
    of the time (that i'm aware of).
    so if you don't mind, let's try doing some basic research.
    (1) head into your "My Computer" while you've got the ipod plugged in. what drives are being assigned to what drive letters? for reference purposes, here's a screenshot of my "My Computer" window:
    http://www.pixentral.com/show.php?picture=1HtsRhQOZw6zixPuie63kEUx4RNKvP0
    (your ipod may not show up in this window. don't panic.)
    do you get the message when you're in this configuration?
    (2) could you head into your itunes "Advanced-General" subtab and take a screenshot of that for us? there's instructions on how to do that given here:
    Hudgie, "Taking screenshots to help with problems.", 12:04pm Apr 19, 2005 CDT
    love, b

  • SOLVED Blurry/Ghosting LCD with Nvidia-96xx

    Hi all,
    I've spent hours trying to figure this out...  I installed the Nvidia-96xx driver for my Geforce2 MX/MX 400 and everything seems ok in my xorg.conf.  XFCE comes up with the right resolution (1280x1024 Dell 1702fp), but everything is blurry.  When i use the Nvidia X Server Settings application, it looks like everything is running correctly - 1280x1024 @ 60hz.  But this doesn't seem right, because otherwise everything wouldn't look so blurry.  And I do mean everything - fonts, icons, etc.
    So I did a bunch of reading and decided to try xrandr.  Well, that seems like a fairly cool command, but it didn't really solve my problem.  However, it did confirm my suspicions that one of these programs is giving me the wrong information, since the only 1280x1024 resolution it gives me is at a 50* 51 refresh rate.  I tried changing the rate with:
    xrandr -r 60
    It wouldn't let me do it.  It says:
    "Rate not available for this size"
    I'm really kind of puzzled about this, I've tried three different ways of generating xorg.conf files (Xorg -configure, xorgconfig, nvidia-xconfig) and they all give me the right resolution, but the wrong refresh rate.  For some reason linux wants to run things at 50hz...
    I'd post more information up here, but I'm not sure what you would want to see.  I'm pretty sure it's not the xorg.conf...
    Hope you guys can help.
    Last edited by syan (2007-02-20 17:40:50)

    Thanks for the reply, berbae.
    I've been trying different things with the xorg.conf file, but nothing I do seems to help.  I tried adding in some of the things you had in yours, like the EDID option and now my xorg.conf looks like this:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "xtrap"
    Load "dbe"
    Load "record"
    Load "extmod"
    Load "dri"
    Load "glx"
    Load "type1"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Dell"
    ModelName "1702FP"
    DisplaySize 337 270
    HorizSync 31-80
    VertRefresh 56-76
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "KGAUniversal" # [<bool>]
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "NV11 [GeForce2 MX/MX 400]"
    BusID "PCI:1:5:0"
    Option "UseEDIDfreqs=false"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Here's the Xorg.0.log file too:
    X Window System Version 7.1.1
    Release Date: 12 May 2006
    X Protocol Version 11, Revision 0, Release 7.1.1
    Build Operating System: UNKNOWN
    Current Operating System: Linux mythos 2.6.20-ARCH #1 SMP PREEMPT Tue Feb 13 14:51:15 CET 2007 i686
    Build Date: 10 January 2007
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 19 12:03:44 2007
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.0
    X.Org XInput driver : 0.6
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
    (II) Module bitmap: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules/libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1022,700e card 0000,0000 rev 13 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1022,700f card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:04:0: chip 1106,0686 card 1043,8040 rev 40 class 06,01,00 hdr 80
    (II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
    (II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 16 class 0c,03,00 hdr 00
    (II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 16 class 0c,03,00 hdr 00
    (II) PCI: 00:04:4: chip 1106,3057 card 1043,8040 rev 40 class 00,00,00 hdr 00
    (II) PCI: 00:09:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
    (II) PCI: 00:09:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
    (II) PCI: 00:09:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80
    (II) PCI: 00:0a:0: chip 1033,0035 card 1799,0001 rev 43 class 0c,03,10 hdr 80
    (II) PCI: 00:0a:1: chip 1033,0035 card 1799,0001 rev 43 class 0c,03,10 hdr 00
    (II) PCI: 00:0a:2: chip 1033,00e0 card 1799,0002 rev 04 class 0c,03,20 hdr 00
    (II) PCI: 01:05:0: chip 10de,0110 card 107d,2834 rev b2 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xce000000 - 0xcfefffff (0x1f00000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xcff00000 - 0xdf7fffff (0xf900000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:5:0) nVidia Corporation NV11 [GeForce2 MX/MX 400] rev 178, Mem @ 0xce000000/24, 0xd0000000/27, BIOS @ 0xcfff0000/16
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
    (II) PCI Memory resource overlap reduced 0xdf800000 from 0xdf800fff to 0xdf7fffff
    (II) PCI I/O resource overlap reduced 0x0000e000 from 0x0000e003 to 0x0000dfff
    (II) Active PCI resource ranges:
    [0] -1 0 0xcb800000 - 0xcb8000ff (0x100) MX[b]
    [1] -1 0 0xcc000000 - 0xcc000fff (0x1000) MX[b]
    [2] -1 0 0xcc800000 - 0xcc800fff (0x1000) MX[b]
    [3] -1 0 0xcd000000 - 0xcd003fff (0x4000) MX[b]
    [4] -1 0 0xcd800000 - 0xcd8007ff (0x800) MX[b]
    [5] -1 0 0xdf800000 - 0xdf7fffff (0x0) MX[b]O
    [6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [7] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[b](B)
    [8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [9] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[b](B)
    [10] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[b]
    [11] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[b]
    [12] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
    [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [14] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    (II) Inactive PCI resource ranges:
    [0] -1 0 0x0000e000 - 0x0000dfff (0x0) IX[b]O
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xcb800000 - 0xcb8000ff (0x100) MX[b]
    [1] -1 0 0xcc000000 - 0xcc000fff (0x1000) MX[b]
    [2] -1 0 0xcc800000 - 0xcc800fff (0x1000) MX[b]
    [3] -1 0 0xcd000000 - 0xcd003fff (0x4000) MX[b]
    [4] -1 0 0xcd800000 - 0xcd8007ff (0x800) MX[b]
    [5] -1 0 0xdf800000 - 0xdf7fffff (0x0) MX[b]O
    [6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [7] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[b](B)
    [8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [9] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[b](B)
    [10] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[b]
    [11] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[b]
    [12] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
    [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [14] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    (II) Inactive PCI resource ranges after removing overlaps:
    [0] -1 0 0x0000e000 - 0x0000dfff (0x0) IX[b]O
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xcb800000 - 0xcb8000ff (0x100) MX[b]
    [5] -1 0 0xcc000000 - 0xcc000fff (0x1000) MX[b]
    [6] -1 0 0xcc800000 - 0xcc800fff (0x1000) MX[b]
    [7] -1 0 0xcd000000 - 0xcd003fff (0x4000) MX[b]
    [8] -1 0 0xcd800000 - 0xcd8007ff (0x800) MX[b]
    [9] -1 0 0xdf800000 - 0xdf7fffff (0x0) MX[b]O
    [10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [11] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[b](B)
    [12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [13] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[b](B)
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [16] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[b]
    [17] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[b]
    [18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
    [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [20] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [21] -1 0 0x0000e000 - 0x0000dfff (0x0) IX[b]O
    (II) LoadModule: "xtrap"
    (II) Loading /usr/lib/xorg/modules/extensions/libxtrap.so
    (II) Module xtrap: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DEC-XTRAP
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading sub module "drm"
    (II) LoadModule: "drm"
    (II) Loading /usr/lib/xorg/modules/linux/libdrm.so
    (II) Module drm: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.9631
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Type1
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.1.1, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.9631
    Module class: X.Org Video Driver
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) NVIDIA dlloader X Driver 1.0-9631 Thu Nov 9 17:39:58 PST 2006
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01:05:0
    (--) Chipset NVIDIA GPU found
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules/libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xcb800000 - 0xcb8000ff (0x100) MX[b]
    [5] -1 0 0xcc000000 - 0xcc000fff (0x1000) MX[b]
    [6] -1 0 0xcc800000 - 0xcc800fff (0x1000) MX[b]
    [7] -1 0 0xcd000000 - 0xcd003fff (0x4000) MX[b]
    [8] -1 0 0xcd800000 - 0xcd8007ff (0x800) MX[b]
    [9] -1 0 0xdf800000 - 0xdf7fffff (0x0) MX[b]O
    [10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [11] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[b](B)
    [12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [13] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[b](B)
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [16] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[b]
    [17] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[b]
    [18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
    [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [20] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [21] -1 0 0x0000e000 - 0x0000dfff (0x0) IX[b]O
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xcb800000 - 0xcb8000ff (0x100) MX[b]
    [5] -1 0 0xcc000000 - 0xcc000fff (0x1000) MX[b]
    [6] -1 0 0xcc800000 - 0xcc800fff (0x1000) MX[b]
    [7] -1 0 0xcd000000 - 0xcd003fff (0x4000) MX[b]
    [8] -1 0 0xcd800000 - 0xcd8007ff (0x800) MX[b]
    [9] -1 0 0xdf800000 - 0xdf7fffff (0x0) MX[b]O
    [10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [11] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[b](B)
    [12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [13] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[b](B)
    [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[b]
    [20] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[b]
    [21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
    [22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [23] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [24] -1 0 0x0000e000 - 0x0000dfff (0x0) IX[b]O
    [25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [26] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): NVIDIA GPU GeForce2 MX/MX 400 at PCI:1:5:0 (GPU-0)
    (--) NVIDIA(0): Memory: 65536 kBytes
    (--) NVIDIA(0): VideoBIOS: 03.11.01.30.00
    (II) NVIDIA(0): Detected AGP rate: 4X
    (--) NVIDIA(0): Interlaced video modes are not supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce2 MX/MX 400 at
    (--) NVIDIA(0): PCI:1:5:0:
    (--) NVIDIA(0): DELL 1702FP (CRT-0)
    (--) NVIDIA(0): DELL 1702FP (CRT-0): 350.0 MHz maximum pixel clock
    (II) NVIDIA(0): Assigned Display Device: CRT-0
    (WW) NVIDIA(0):
    (WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    (WW) NVIDIA(0): will be used as the requested mode.
    (WW) NVIDIA(0):
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "nvidia-auto-select"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b]
    [1] 0 0 0xce000000 - 0xceffffff (0x1000000) MX[b]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1 0 0xcb800000 - 0xcb8000ff (0x100) MX[b]
    [7] -1 0 0xcc000000 - 0xcc000fff (0x1000) MX[b]
    [8] -1 0 0xcc800000 - 0xcc800fff (0x1000) MX[b]
    [9] -1 0 0xcd000000 - 0xcd003fff (0x4000) MX[b]
    [10] -1 0 0xcd800000 - 0xcd8007ff (0x800) MX[b]
    [11] -1 0 0xdf800000 - 0xdf7fffff (0x0) MX[b]O
    [12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [13] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[b](B)
    [14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [15] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[b](B)
    [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [21] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[b]
    [22] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[b]
    [23] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
    [24] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [25] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [26] -1 0 0x0000e000 - 0x0000dfff (0x0) IX[b]O
    [27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [28] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) Loading extension NV-CONTROL
    (WW) NVIDIA(0): Option "UseEDIDfreqs=false" is not used
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    (**) Option "Protocol" "auto"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: Core Pointer
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Option "CoreKeyboard"
    (**) Keyboard0: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (II) XINPUT: Adding extended input device "NVIDIA Damage Notification Manager" (type: Other)
    (II) XINPUT: Adding extended input device "NVIDIA Kernel RC Handler" (type: Other)
    (II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
    (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    Apart from the warnings "No modes were requested ..." and "option "UseEDIDfreqs=false" is not used" nothing looks that bad to me.  Any ideas?  This is what I see in xfce:
    http://img299.imageshack.us/img299/5268 … ot2dk6.png
    I also tried using the gtf output a few times and that didn't work either.  I'm starting to wonder if it's a hardware problem.  Seems kind of subtle for a malfunctioning graphics card though, doesn't it?
    Thanks again

  • When I try to download all my info like notes and contacts onto a new iphone an error appears saying that it is incompatible or the backup was corrup, how do I fix this?

    When I try to download all my info like notes and contacts onto a new iphone an error appears saying that it is incompatible or the backup was corrup, how do I fix this?

    Which is it?  Is "it" incompatible or is the backup corrupt?
    What specifically are you attempting and what specifically is occurring?

  • I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune w

    Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune  y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada.  Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar,  he buscado para ver si tiene errores  el disco del Ipod y me dice que esta bien.  Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo.  He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien.  Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo.  Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema. 
    I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.

    06-sep-2012 0:14 
    Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune  y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada.  Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar,  he buscado para ver si tiene errores  el disco del Ipod y me dice que esta bien.  Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo.  He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien.  Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo.  Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
    I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
    iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA 

  • Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    #1
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    #1.1 n/a because the errror message overrides it
    #2 see #1
    #3 iOS: Device not recognized in iTunes for Mac OS X
    But could be caused by #1
    #4 Covered by previous ones
    #5 Obvious jpegs are photos and thus will not sync as videos. Also see:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    #6 iOS: If you can't back up or restore from a backup in iTunes
    First #7 See #6
    Second #7 You have so many other problems resolve those first
    #8 Resolve other problems first

  • Xorg 1.8 - nvidia 96xx legacy driver

    Since a few weeks I use Archlinux and I'was happy with it until my last upgrade. After this (incl. kernel 2.6.34 and xorg 1.8) I was lost in the dark. Googling learned me that the nvidia 96xx legacy driver (I have an old Geforce card) cannot cope with xorg 1.8 (yet??). Could this be better coordinated in the future?
    If not, can someone please explain (in simple terms, I'm a newbie, what to do if such things happen).
    Thanks in advance.

    Lets see (long post)
    uname -a
    Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux
    [ 11.364]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 11.364]
    X.Org X Server 1.8.1.902 (1.8.2 RC 2)
    Release Date: 2010-06-21
    [ 11.364] X Protocol Version 11, Revision 0
    [ 11.364] Build Operating System: Linux 2.6.34-ARCH i686
    [ 11.364] Current Operating System: Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686
    [ 11.364] Kernel command line: root=/dev/sda1 ro fastboot quiet 4
    [ 11.364] Build Date: 21 June 2010 11:54:27AM
    [ 11.364]
    [ 11.378] Current version of pixman: 0.18.2
    [ 11.378] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 11.378] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 11.378] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 28 02:17:21 2010
    [ 11.401] (==) Using config file: "/etc/X11/xorg.conf"
    [ 11.401] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 11.450] (==) ServerLayout "Layout0"
    [ 11.450] (**) |-->Screen "Screen0" (0)
    [ 11.450] (**) | |-->Monitor "Monitor0"
    [ 11.450] (**) | |-->Device "Device0"
    [ 11.450] (**) |-->Input Device "Keyboard0"
    [ 11.450] (**) |-->Input Device "Mouse0"
    [ 11.450] (==) Automatically adding devices
    [ 11.450] (==) Automatically enabling devices
    [ 11.503] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 11.503] Entry deleted from font path.
    [ 11.503] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 11.503] Entry deleted from font path.
    [ 11.521] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 11.521] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 11.521] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 11.521] (WW) Disabling Keyboard0
    [ 11.521] (WW) Disabling Mouse0
    [ 11.521] (II) Loader magic: 0x81e9d00
    [ 11.521] (II) Module ABI versions:
    [ 11.521] X.Org ANSI C Emulation: 0.4
    [ 11.521] X.Org Video Driver: 7.0
    [ 11.521] X.Org XInput driver : 9.0
    [ 11.521] X.Org Server Extension : 3.0
    [ 11.531] (--) PCI:*(0:1:0:0) 10de:0181:1462:9350 nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] rev 164, Mem @ 0xfb000000/16777216, 0xf4000000/67108864, BIOS @ 0x????????/131072
    [ 11.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 11.531] (II) LoadModule: "extmod"
    [ 11.580] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 11.589] (II) Module extmod: vendor="X.Org Foundation"
    [ 11.589] compiled for 1.8.1.902, module version = 1.0.0
    [ 11.589] Module class: X.Org Server Extension
    [ 11.589] ABI class: X.Org Server Extension, version 3.0
    [ 11.589] (II) Loading extension MIT-SCREEN-SAVER
    [ 11.589] (II) Loading extension XFree86-VidModeExtension
    [ 11.589] (II) Loading extension XFree86-DGA
    [ 11.591] (II) Loading extension DPMS
    [ 11.591] (II) Loading extension XVideo
    [ 11.591] (II) Loading extension XVideo-MotionCompensation
    [ 11.591] (II) Loading extension X-Resource
    [ 11.591] (II) LoadModule: "dbe"
    [ 11.608] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 11.618] (II) Module dbe: vendor="X.Org Foundation"
    [ 11.618] compiled for 1.8.1.902, module version = 1.0.0
    [ 11.618] Module class: X.Org Server Extension
    [ 11.618] ABI class: X.Org Server Extension, version 3.0
    [ 11.618] (II) Loading extension DOUBLE-BUFFER
    [ 11.619] (II) LoadModule: "glx"
    [ 11.619] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 12.050] (II) Module glx: vendor="NVIDIA Corporation"
    [ 12.050] compiled for 4.0.2, module version = 1.0.0
    [ 12.050] Module class: X.Org Server Extension
    [ 12.050] (II) NVIDIA GLX Module 96.43.16 Thu Jan 28 16:14:25 PST 2010
    [ 12.050] (II) Loading extension GLX
    [ 12.050] (II) LoadModule: "record"
    [ 12.051] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 12.061] (II) Module record: vendor="X.Org Foundation"
    [ 12.061] compiled for 1.8.1.902, module version = 1.13.0
    [ 12.061] Module class: X.Org Server Extension
    [ 12.061] ABI class: X.Org Server Extension, version 3.0
    [ 12.061] (II) Loading extension RECORD
    [ 12.061] (II) LoadModule: "dri"
    [ 12.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 12.074] (II) Module dri: vendor="X.Org Foundation"
    [ 12.074] compiled for 1.8.1.902, module version = 1.0.0
    [ 12.074] ABI class: X.Org Server Extension, version 3.0
    [ 12.074] (II) Loading extension XFree86-DRI
    [ 12.074] (II) LoadModule: "dri2"
    [ 12.074] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 12.075] (II) Module dri2: vendor="X.Org Foundation"
    [ 12.075] compiled for 1.8.1.902, module version = 1.2.0
    [ 12.075] ABI class: X.Org Server Extension, version 3.0
    [ 12.075] (II) Loading extension DRI2
    [ 12.075] (II) LoadModule: "nvidia"
    [ 12.084] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 12.137] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 12.137] compiled for 4.0.2, module version = 1.0.0
    [ 12.137] Module class: X.Org Video Driver
    [ 12.137] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 9.0, need < 8.0). The driver will continue to load, but may behave strangely.
    [ 12.175] (II) NVIDIA dlloader X Driver 96.43.16 Thu Jan 28 16:02:25 PST 2010
    [ 12.176] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 12.176] (--) using VT number 4
    [ 12.178] (II) Primary Device is: PCI 01@00:00:0
    [ 12.178] (II) Loading sub module "fb"
    [ 12.178] (II) LoadModule: "fb"
    [ 12.178] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 12.189] (II) Module fb: vendor="X.Org Foundation"
    [ 12.189] compiled for 1.8.1.902, module version = 1.0.0
    [ 12.189] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 12.190] (II) Loading sub module "ramdac"
    [ 12.190] (II) LoadModule: "ramdac"
    [ 12.190] (II) Module "ramdac" already built-in
    [ 12.211] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 12.211] (==) NVIDIA(0): RGB weight 888
    [ 12.211] (==) NVIDIA(0): Default visual is TrueColor
    [ 12.211] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 12.211] (**) NVIDIA(0): Option "DPI" "96x96"
    [ 12.214] (**) NVIDIA(0): Enabling RENDER acceleration
    [ 12.214] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    [ 12.214] (II) NVIDIA(0): enabled.
    [ 12.706] (II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 with AGP8X at PCI:1:0:0 (GPU-0)
    [ 12.706] (--) NVIDIA(0): Memory: 65536 kBytes
    [ 12.706] (--) NVIDIA(0): VideoBIOS: 04.18.20.07.23
    [ 12.706] (II) NVIDIA(0): Detected AGP rate: 8X
    [ 12.706] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 12.706] (--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 with AGP8X at
    [ 12.706] (--) NVIDIA(0): PCI:1:0:0:
    [ 12.706] (--) NVIDIA(0): LG TV (CRT-0)
    [ 12.706] (--) NVIDIA(0): LG TV (CRT-0): 350.0 MHz maximum pixel clock
    [ 12.707] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 12.707] (II) NVIDIA(0): Validated modes:
    [ 12.707] (II) NVIDIA(0): "856x481"
    [ 12.707] (II) NVIDIA(0): Virtual screen size determined to be 856 x 481
    [ 12.707] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 12.707] (--) Depth 24 pixmap format is 32 bpp
    [ 12.709] (II) NVIDIA(0): Initialized GART.
    [ 12.720] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [ 12.728] (II) NVIDIA(0): Setting mode "856x481"
    [ 12.813] (II) Loading extension NV-GLX
    [ 12.824] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    [ 12.840] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    [ 12.850] (==) NVIDIA(0): Backing store disabled
    [ 12.850] (==) NVIDIA(0): Silken mouse enabled
    [ 12.852] (**) NVIDIA(0): DPMS enabled
    [ 12.852] (II) Loading extension NV-CONTROL
    [ 12.852] (==) RandR enabled
    [ 12.852] (II) Initializing built-in extension Generic Event Extension
    [ 12.852] (II) Initializing built-in extension SHAPE
    [ 12.852] (II) Initializing built-in extension MIT-SHM
    [ 12.852] (II) Initializing built-in extension XInputExtension
    [ 12.852] (II) Initializing built-in extension XTEST
    [ 12.852] (II) Initializing built-in extension BIG-REQUESTS
    [ 12.852] (II) Initializing built-in extension SYNC
    [ 12.852] (II) Initializing built-in extension XKEYBOARD
    [ 12.852] (II) Initializing built-in extension XC-MISC
    [ 12.852] (II) Initializing built-in extension SECURITY
    [ 12.852] (II) Initializing built-in extension XINERAMA
    [ 12.852] (II) Initializing built-in extension XFIXES
    [ 12.852] (II) Initializing built-in extension RENDER
    [ 12.852] (II) Initializing built-in extension RANDR
    [ 12.852] (II) Initializing built-in extension COMPOSITE
    [ 12.852] (II) Initializing built-in extension DAMAGE
    [ 12.856] (II) Initializing extension GLX
    [ 13.318] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 13.318] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.318] (II) LoadModule: "evdev"
    [ 13.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 13.326] (II) Module evdev: vendor="X.Org Foundation"
    [ 13.326] compiled for 1.8.0, module version = 2.4.0
    [ 13.326] Module class: X.Org XInput Driver
    [ 13.326] ABI class: X.Org XInput driver, version 9.0
    [ 13.326] (**) Power Button: always reports core events
    [ 13.326] (**) Power Button: Device: "/dev/input/event4"
    [ 13.333] (II) Power Button: Found keys
    [ 13.333] (II) Power Button: Configuring as keyboard
    [ 13.333] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 13.333] (**) Option "xkb_rules" "evdev"
    [ 13.333] (**) Option "xkb_model" "evdev"
    [ 13.333] (**) Option "xkb_layout" "us"
    [ 13.377] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 13.377] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.377] (**) Power Button: always reports core events
    [ 13.377] (**) Power Button: Device: "/dev/input/event2"
    [ 13.387] (II) Power Button: Found keys
    [ 13.387] (II) Power Button: Configuring as keyboard
    [ 13.387] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 13.387] (**) Option "xkb_rules" "evdev"
    [ 13.387] (**) Option "xkb_model" "evdev"
    [ 13.387] (**) Option "xkb_layout" "us"
    [ 13.387] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 13.387] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 13.387] (**) Sleep Button: always reports core events
    [ 13.387] (**) Sleep Button: Device: "/dev/input/event3"
    [ 13.397] (II) Sleep Button: Found keys
    [ 13.397] (II) Sleep Button: Configuring as keyboard
    [ 13.397] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 13.397] (**) Option "xkb_rules" "evdev"
    [ 13.397] (**) Option "xkb_model" "evdev"
    [ 13.397] (**) Option "xkb_layout" "us"
    [ 13.401] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 13.401] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 13.401] (**) AT Translated Set 2 keyboard: always reports core events
    [ 13.401] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 13.410] (II) AT Translated Set 2 keyboard: Found keys
    [ 13.410] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 13.410] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 13.410] (**) Option "xkb_rules" "evdev"
    [ 13.410] (**) Option "xkb_model" "evdev"
    [ 13.410] (**) Option "xkb_layout" "us"
    [ 13.411] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
    [ 13.411] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 13.411] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 13.411] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found relative axes
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    [ 13.423] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
    [ 13.423] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 13.423] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 13.423] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
    [ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 13.424] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    [ 13.424] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
    [ 13.424] (II) No input driver/identifier specified (ignoring)
    [ 13.424] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 13.424] (II) No input driver/identifier specified (ignoring)
    [tigtex@mediacenter ~]$ glxgears
    Running synchronized to the vertical refresh. The framerate should be
    approximately the same as the monitor refresh rate.
    7096 frames in 5.0 seconds = 1419.008 FPS
    7110 frames in 5.0 seconds = 1421.859 FPS
    7111 frames in 5.0 seconds = 1422.168 FPS
    01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4)
    [tigtex@mediacenter ~]$ lsmod | grep nvidia
    nvidia 4657813 22
    i2c_core 15144 2 i2c_viapro,nvidia
    agpgart 23120 2 nvidia,via_agp
    [root@mediacenter tigtex]# pacman -Syu
    :: Synchronizing package databases...
    testing is up to date
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    there is nothing to do
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jan 28 16:14:36 PST 2010
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 30.0 - 110.0
    VertRefresh 50.0 - 150.0
    Option "DPMS"
    Option "DPI" "96x96"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "856x481"
    EndSubSection
    EndSection
    pacman -Qs nvidia
    local/libvdpau 0.4-1
    Nvidia VDPAU library
    local/nvidia-96xx 96.43.16-3
    NVIDIA drivers for kernel26, 96xx branch.
    local/nvidia-96xx-utils 96.43.16-1
    NVIDIA drivers utilities and libraries, 96xx branch.
    Good luck with the mistery.
    I didn't use anything else to install nvidia-96xx, it was with pacman. nvidia-96xx is no longer on repos but it was when i made the setup. I dont see why they removed it. Works 100% good here on my SD plasma. Even with games and xbmc.
    Last edited by TigTex (2010-06-28 01:36:03)

  • Mid 2010 iMac upgraded SSD, can't seem to install windows via bootcamp. Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems error

    I have windows 8.1 on DVD & on USB CF Reader/Card. I've followed the full steps in bootcamp, but when it restarts and its time to select the bootcamp partition to install windows (after alt rebooting to the efi startup) I get the "Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems" error.
    I've scoured the internet trying different solutions that seem to work for everyone else, but to no avail. I've reformatted from that screen, doesn't help. I've removed bootcamp partition and manually partitioned using disk util, leaving it empty once partition-wise, and filling it with a blank partition the second time. I've done a full back up and clean re-install of Yosemite, and nothing seems to be working.
    Thats when I switched to DVD install, as I heard sometimes you can't install with a CF card. When I alt-boot, I can see EFI-windows and windows, but if I select EFI-windows, same problem as before, and if I select windows, I get the black screen of "no bootable device please insert boot disk and press any key."
    I've been stuck w/o bootcamp for over 2 years now. Anyone, please help?
    Mid 2010 iMac running 256gb SSD, Yosemite 10.10.1 trying to install windows 8.1

    I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
    This is the Windows error:
    Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
    Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
    I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

  • Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem m

    Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem making the program no longer work properly. The program is closed and there is a notification if a solution is available.

    I may have just solved my own problem. Right after posting this I googled bezel lightroom and found this: Flickr: Discussing The word 'bezel' appears in the taskbar. in Adobe Lightroom
    I changed the setting in the view menu and now everything appears to be working fine. I cannot explain why it stopped working before because I hadn't made any previous changes to the view options.
    Still am curious about the memory usage, though.

  • Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up?

    Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up? It's brand new, so I don't understand why it would be doing this?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Recent nvidia-96xx update

    Currently I'm using kernel26ck and because one of my graphics cards is a geforce4 I need to use the legacy nvidia  drivers.  nvidia-96xx and nvidia-96xx-utils was recently updated, but nvidia-96xx-ck was not, which creates a version error with nvidia module when starting X with kernel26ck. I see in the extra repostory the nvidia-96xx-ck is flaged as out of date.
    So my question is.. Is kernel26ck and nvidia-96xx-ck no longer being maintained?

    Thanks! : )
    I couldn't find any topics about kernel26ck going away any time soon, So I thought maybe this was the case.

Maybe you are looking for

  • Help. Updated to ios7 and itunes 11.1 but now I'm stuck on the 'connect to itunes' screen

    I backed up my phone on itunes before I began this process. I downloaded itunes 11.1  While downloading ios7 I had an error message which was likely due to the limited memory space available on my laptop..(I cleaned some stuff up and it downloaded) 

  • "Save as" function of meld not working with gksu

    Hi there, I used to run $ gksu meld to merge changes of my config files in /etc. After editing I was able to select Save as from the context menu and overwrite the old config file with the modified .pacnew file. This is no longer working. I can save

  • XI transport method

    Hi, I know there was 3 transport method for XI which is 1) File Transport 2) CMS 3) CTS Can anyone guide me what is the consideration for implement it on our XI system? Which method is recommended? Edited by: fcgan on Jan 12, 2009 10:17 AM

  • Internet via ethernet

    Greetings. I've searched posts for ages and never found a solution to connecting extra macs via ethernet so I can transfer not only files (and often big files hence not using wireless) and also connect to net. I'm setting up a new Mac Pro with Snow L

  • IMovie crashing when I try to export

    iMovie crashes with below error when I try to export a file.Any help is appreciated. MacBook Air Yosemite 10.10.2 The operation couldn't be completed (com.apple.Compressor.CompressorKit.ErrorDomain.error -1) Thanks, Steve