Info Pack asks for trasnport request

Dear all,
After Patch Upgrade from EHP4 to EHP 10 , During Info pack edit it is asking for transport request.
we done below setting:
Transport connection>Object changeability>Info Package Type: (ISIP)--->Everything Changeable.
we are in SAP_BW (SAPKW73110) and release 731 , SP Level-10
Error message:
Carry out repairs in non-original system only if they are urgent
Message no. TR850
Diagnosis
This SAP System is not the original system of the object being edited.
System Response
The function continues.
Procedure
Only perform urgent repairs and also maintain these changes in the original system of the object.
waiting for favorable reply.
Regards,
Linganathan

I think that setting you have done is not necessary.Just collect your info package by searching & transferring to right side panel in transport connection. Also make sure that your Package is not in $tmp, If needed you can change it by right click on info package and assign there Package.
If info package in standard one then no need of it.
And one more thing I think is make sure you are collecting info package in Development/Correction's Task not in repair one;according to your error message.
Also you can collect your info package directly in your TR by double click on Development/Correction's Task and edit it. In Program Id put "R3TR",
object type "ISIP" and in object name Info pack tech name. Now save it. If any lock problem occurs unlock your task using SE03.
At the end check your TR for info package.

Similar Messages

Maintenance view entries asking for Tr. request

Hi ,
I have created a Maintenance view for a table.
While creating entries through view it is asking for
transport request.
How can I get rid of this prompt for transport request ?
Thanks,
Sandip.

Hi sandip,
1. Thats bcos in se11,
the DELIVERY CLASS
for this table must be C
(customizing table)
2. Make it to A (applicatkion table)
save, and activate the table,
and once again, create table maintenance.
regards,
amit m.

Customizing tables not asking for Customizing Request while saving data

Hi,
I have some customizing tables in my development server (Delivery Class = 'C').
These always used to ask for a Customizing Request whenever data was saved in them.
Suddenly, I have noticed they are no more asking for any Customizing Request. I cross-checked in the Transport Organizer and confirmed that there are no customizing requests of mine which may be already holding any data entries of these tables.
I wonder why this may be happening (believe it to be some basis configuration issue. also asked my basis guy but he has no clue).
Kindly suggest.
Thanks,
Z

Thanks Navneet and Gautham.
My problem is now solved. Let me summarize the problem and the solution now.
-> The customization tables suddenly stopped asking for a request while saving data.
Somehow the settings had been reset, and as Gautham pointed out, it was corrected in the tcode SCC4
-> Most of the tables now worked fine, but still few of them didnt ask for requests
Here, I found out that the developers had chosen "no, or user, recording routine" instead of "standard recording routine". For such tables, when i check in the tcode SE54, menu path Environment -> Maintenance Objects -> Change, I find the Transport category 'No Transport'. Regenerating the maintenance generator choosing "standard recording routine" fixes this and the tables now ask for a customizing request.
Thanks, both, for the quick response.

I want to change my apple id on my macbook pro in the user info. it ask for a password...i am typing in my password to the apple id but it will not accept it....how to solve it ?

i want to change my apple id on my macbook pro in the user info. it ask for a password...i am typing in my password to the apple id but it will not accept it....how to solve it ?

I'm afraid that you may be confusing two different 'passwords' - there's your Apple ID (the user name and password that you used to get into these forums) and then there's your computer user name and password - usually two seperate user names and passwords.
If you want to change your password for your user account on your computer, go to System Preferences>Users & Groups and unlock the preference pane. Then you can select your user name and change your password there. Changing a user name is a bit complex and I don't think you want to try that!
Clinton

Asking for transport request whie table data updation

Hi All,
I am trying to update a table TCJ04 using transaction OPS6. When ever I am adding a new entry or edit the existing entry and click SAVE, the table is asking for Transport request number.
This table carries a master data and should not be asking for transport request. Rather its access has to be controlled by user authorisation.
Please tell me as to what is the reason of asking for transport request.
regards,
Gaurav.

Hi Gourav,
If you go table maintanance generater of the table TCJ04 in SE11, you will find that Standard recording routine radio button is selected. That is the reason you are asked to provide transport request while updating data.

Asking for Transport Request while editing DTP in Quality - Client Open

Hi Guru's,
We have opened the client and trying to edit the DTP, but it is asking for transport request.
Is there any other setting that we need to do in order not to prompt for transport request?
Thanks & Regards.

Hi Ganesh,
One of the options would be to save it in a DUMMY request ,incase you do not want to transport such that you make changes next time it will by default get saved in that DUMMY request i.e it will not ask for a request next time.
We usually save it in Dummy request,when we change a DTP in Quality or in Production.
Rgds
SVU123

Asking for transport request while table data updation

Hi All,
I am trying to update a table TCJ04 using transaction OPS6. When ever I am adding a new entry or edit the existing entry and click SAVE, the table is asking for Transport request number.
This table carries a master data and should not be asking for transport request. Rather its access has to be controlled by user authorisation.
Please tell me as to what is the reason of asking for transport request.
regards,
Gaurav.

Hi There,
It is asking for the transport request for each new entry in the table since the Delivery class in the attributes is set to C( Customizing table, maintenance only by cust., not SAP import ), If it is set to "A" it will not ask for the transport request..
Try creating a custom table and play around with the Delivery class, A and C, you will come to know the difference.
Let me know if you need further help in this regard.
don't 4get to rward pionts if found helpful.
Thanks-

HT204266 App store say's I need to answer three security questions but keeps asking for my password! Won't log in to fill in info keeps asking for password even though I fill in password.

After setting up new account with iCloud so I can use the app store it asks me to answer three security questions for further security then I am prompted for my password to log in then I put in password and it never logs me in and keeps on asking for my password. I went over all setting but found no problems wit network as I can go on line etc, if anyone has had this issues please help. I was able to download too apps and then was prompted to answer these questions and it would not let me proceed.

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

Customer table with delivery class 'A' asking for a request

Hello.
I've built an customer table and defined the delivery class 'A' ... Application table (master and transaction data).
Data Browser/Table View Maint. 'X' ... Display/Maintenance Allowed.
Why is this type of table definition asking for a change request to store table entries?
Please, provide some help.
Mário Semedo

Thanks ... how did i let it pass?
Thanks alot!

While creating proxie asking for transport Request/task...

Hi Experts,
This is the first time i am creating proxies. When i entered Spoxy transaction and trying to activate the proxie its asking for package name,Prefix and Transport (Request/Task) .
The transport request shouild be created by network people or we can ignore it and it can created later.
Please guide me on how to proceed further.
Regards
Santosh

Hi
The prefix name will be used in the creation of Proxy-Interface ABAP Name and in Implemented Class ABAP Name.
You should provide the transport request which will be helpful for further transport from one system to another.

Importing standard SAPScript text - not asking for transport request!

Hi!
I tried to import some standard SAPScript text running program RSTXSCRP.
Everything was fine, but I was not asked for package and for a transport request... is it ok?
How can I send this standard text to Quality system?
Will reward,
Mindaugas

You can use program : RSTXTRAN
Navigation -> goto SE38 -> enter RSTXTRAN -> execute ->
Name of correction -
text key -object - TEXT
text key- name - enter standard text name
Text id - ST
Text key language - EN
execute now -> select text here -> enter -> now click on push button trsfr texts to corr -> you will get pop up window( request)
Thanks
Seshu

J1ID asks for Transport Request

Hi All,
The system asks for a transport request number while creating or changing excise tax rates and chapter ID in J1ID.
How do i disable the asking of the Transport Request number.
Thanks in advances!!!
Regards,
Gaurav Nayar

Hi,
J1ID is for master data, No request should be cretaed.
Contact Basis Consultant or set in SCC4 t.code .
Regards,
Biju K

Problem entering credit card info : itunes asking for 3 letters but in drop down just have 2 letters for province

i try to download app in app store .
i filled credit card info about my address and get stuck on province collum.
it drop down option but itunes want province name in 3 letters but the option in drop down list just get 2 letters..
please help

You will get more feedback if you post in the iTunes forum here.
This is the Mac App Store forum for apps that run on the Mac OS X, not iOS devices.

Magic TrackPad asking for Pairing Request

Hello guys,
I was using my MagicTrackpad in my old MBP. I just got my new MBA but when I try to pair my Magic Trackpad the Blutooth panel asks me for a passcode!
I have tried in the Passcode Options the "Do not use a passcode with this device" but once again the passcode input window appears.
Any way to reset the bluetooth or trackpad itself?
Im on Lion!
Thanks!

Found the workaround!!!
Just hold the Trackpad power button until it flashes... keep on pushing it and open the "Set Up Bluetooth Devide" panel... go through the set up process (keep the power pressed down) and there you go.
It Works!

Flat file data sources info pack executing for long time with yellow

I can see flat file all records 140 in above screen but i could not see data in PSA . when i am trying to see the PSA it show not data .
I have tries to make status to green but still request not process to Data target .

HI,
When you see message like there is no psa mean data source was not in active.
so activate your data source Thru by using SE38 - RSDS_DATASOURCE_ACTIVATE_ALL(bw 7.x).
After the activation you can try to load data.before that make your yellow request to red status and delete it.
later reload the same flat file.
Thanks

Info Pack asks for trasnport request

Similar Messages

Maybe you are looking for