Info Package Selection Language key is not diplaying while this is checked

Hi
i am facing an issue in BI 7.0
in Info Package Data Selection Tab "Language key field" is not diplaying while this field is checked as a Selection option in R3 Data source.
How can i put Language key field in Info package data selection
Regards
Atul
Edited by: AtulMohan Mishra on Apr 28, 2011 11:50 AM
Edited by: AtulMohan Mishra on Apr 28, 2011 11:50 AM

Hi,
Please see OSS note 1033537 .Even if langauge selection is available in infopackage it wont work .Tthe only way to restrict a particular language is in DTP or in transformation routine. Infopackage will extract all the language that is installed in BW system and you have to place your restriction in DTP or transformation.
Regards,
Raghavendra.
Edited by: Raghavendra Padmanaban on Apr 28, 2011 9:18 AM

Similar Messages

Issue withe Info Package Selection for the CRM Datasource

Hello,
I have a custom CRM data-source which has the Selection option as CRM-GUID as the Selection option in the RSA3.
I have replicated the Same Data-source in BI system and Created the Info Package ,but i could not see that GUID Selection in the Info Package.
To Be Noted:
I went to RSA6 enabled the selection option( check Box ) , there is no hide option in the datasource , only the Selection option check box is enabled in the RSA6 .
Replicated again , and activated again , logged out and logged in again . But the Info Package does not show the CRM - GUID selection option.
I found something not sure this might be the issue:
1) The Data type is RAW with length 16.
2) The Datasource in the BI side has SS conversion Routine Blank for this field and the Selection has X.
But no Selection option in the Info Package.
Any suggestion and inputs are welcome.
Thanks in advance.
Adhvi.

similar issue is disussed in the below thread...
Info package Selection were hidden
Info Package Selection Language key is not diplaying while this is checked
search for any SAP Note which explains about data type RAW ....

Language key in info-package selection

Hi,
Just wondering on the language key selection in the info-package. This topic was raised a number of times in the forum and what i have found is no matter what you do 'Language Key' will not appear in the info-package selction as its a srevice API feature and BW will automatically assign the language key based on the installed languages.
If i need to filter out on any particular language then i need to use some formula / routines etc (of course this is the last option).
Is my understanding correct ? or Do we have some workarounds to make the language key available in the info-package ?
Points will be assigned to value added answers.
Thanks,
Soumya

Hi Soumya,
Hope you would have checked these:
1. Datasource for text is lang-dependent. If not make it lang-dependant.
Also check:
look in OSS Note 324684 'Selections for language and time-dependence'...
"If a field of a DataSource - typically with field name 'LANGU' or 'SPRAS' - is assigned to InfoObject '0langu', the field is not provided in the selection fields although the field actually can be selected. In this case, all languages of the language vector active in the BW System are requested by the source system but the language selection cannot be defined in the Scheduler.
Check for more details:
Re: Infopackage Language Selection
Bye
Dinesh

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

Hello After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

Hello
After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
https://discussions.apple.com/thread/3023160?

BW 2.0B, info package selection, cant use two system variable for 0CALMONTH

Hi Experts,
I am working on BW 2.0B in APO system. There is an info package for which I want to supply two selection value for 0CALMONTH as equal to current month and last month. System variables 0CMONTH (for current month) and 0CMLMON (for last month) are available but I am not able to use them both.
If I change the variable in one selection, it automatically changes the other one too, making both the selection as same variable.
Can you suggest any solution/idea?
Regards,
Purvang

any ideas to achieve this?

Calweek in Info package selection parameter

Hi,
I need to send the data from cube1 to another cube2 on weekly basis.
Cube1 is getting the data on daily basis.
on every week end i need to send the data to cube2 based on selection parameter OCALWEEK, and the load should be full update.
i want automatic, so that every week end InfoPackage selection parameters should change to next calweek so that it will fetch correct lastweek data to cube 2 from cube.
Can you please suggest me how to automate the Info package.
Regards,
Silpa

Hi,
at infopacks selection screen, for field 0calweek select type : abap routine.
in routine use function mod DATE_GET_WEEK to retrive the week based on sy_datum (current date), reduce the result -1 and the result will be calweek minus 1, e.g.: 200725 for today.
/manfred

How to select date range 01/01/2007 to till date in info package selection

HI
I have a business requirement like i have to load data from 01.05.2007 to till date daily and the the till date should change daily when we are scheduling it daily.
data: l_idx like sy-tabix.
read table l_t_range with key
 fieldname = 'KDAY'.
 l_idx = sy-tabix.
 L_T_RANGE-IOBJNM = '/BI0/0CALDAY'.
 L_T_RANGE-FIELDNAME = 'KDAY'.
 L_T_RANGE-SIGN = 'EQ'.
 L_T_RANGE-OPTION = '<>'.
 L_T_RANGE-LOW = '01.05.2007'.
 L_T_RANGE-HIGH = 'sy-datum'.
 modify l_t_range index l_idx.
l_idx = sy-tabix.

Hi,
try to debug that one by putting a break-point.
there is a reply from A.H.P , how to debug the routine in the infopackage.
put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
and when run infopackage, go to sm50,
on that process, menu program->debug program,
in debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.

On Start-Up my Imac shows (**********) in the Password Field, and I cannot get rid of them, the delete key is not effective. This also happens in other program password fields. Any ideas?

On Start Up My I - Mac automatically fills the password field with (****************) , and they are very hard to delete. This also happens with the password
field in other applications, like my Mail Server, etc. I am on Mac OSX 10.5.8. Any Ideas?

But does it work if you just hit Enter?

Adding a field in data selection tab of Info Package

Hello,
how can I add a field for selection in the data selection tab of the info-package in BW 3.5.
Thanks,
SD

Hi,
You need check Selection in RSO2 in ECC then that field is available for Selectgion in InfoPackage.
Here I'm giving 0CUST_SALES_ATTR DataSource Example for Selection Change, so see the logic and accordingly you can change your DataSource Selections.
See the properties of that field in RSA2 in ECC and you can also make it for selection, use the following program and see it.
In ROOSFIELD table give the datasource 0CUST_SALES_ATTR and see , select only Active version Fields.
For the following fields you can find FIELD = X, it indecates that it is abailable for selections, so in this way you try to do it by using following program and check.
KUNNR
SPART
VKORG
VTWEG
REPORT ZBI_ROOSFIELD NO STANDARD PAGE HEADING .
tables ROOSFIELD.
Update ROOSFIELD set SELECTION = 'X' where
OLTPSOURCE = '0CUST_SALES_ATTR' and
FIELD = 'FAKSD '.
Also see SAP Note : 1033847
Re: Field Selection in Datasource 0CUST_SALES_ATTR
Thanks
Reddy

Selection Option question in Info Package

We would like to stop update Master Data if no master data exists for a characteristics. I found there is a selection options in Info Package Update Tab called "Do not update data if no master data exists for a characteristic"
I added a row in one of the InfoObject which has been used in another InfoObject as an Attribute. I selected this option in the IP and tried to re-load Master Data, and it didn't fail.
What does this option do?
Thanks!

For example:
InfoObject ITEM and ITMPLN. ITEM is an Attribute in ITMPLN.
ITEM has
Item Description
001 Test 1
002 Test 2
ITMPLN has
Project No Item Description
A 001 Test A
B 002 Test B
C 004 Test C
After I load the last row to ITMPLN, I would like to see the error message instead of adding 004 into ITEM InfoObject. Do you know how to do it?
Thank you!

How come when I update Firefox in Ubuntu, the existing french language package is not functional while in Windows, it always works without problems?

When I upgrade Firefox (French, from 13.0 to 13.0.1) in Ubuntu, the existing french language pack does not work, while in Windows 7, it does work without problems. It seems to me that the language pack should be system independent.
This problem happens in Ubuntu everytime there is an upgrade, and it is usually very difficult to find the correct language file that wors in Ubuntu. Again, in Windows, no such problem.
I am puzzled.

You always need to reinstall language packs if you update Firefox because the updater doesn't seem to be able to find them on its own.
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/win32/xpi/
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/linux-i686/xpi/

Info package ABAP Routine to populate date from and To filed

Hello Experts,
I have requirement to populate the From and To dates with the: T-1 to T (Current Date u2013 1 to Current Run Date aka Sy-Datum) at info package level.I have written a code for this but see that From filed is not getting populated but TO filed is filled with current date.Can someone please tell me wats wrongwith my code?It is a delta info pacakage.
data: l_idx like sy-tabix.
read table l_t_range with key
     fieldname = 'CPUDT'.
l_idx = sy-tabix.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
l_t_range-low = sy-datum - 1.
l_t_range-High = sy-datum.
modify l_t_range index l_idx.
p_subrc = 0.
Thanks,

Was able to tackle this using the following code.
data: l_idx like sy-tabix.
data: V_date type sy-datum.
v_date = sy-datum - 1.
read table l_t_range with key
     fieldname = 'CPUDT'.
l_idx = sy-tabix.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
l_t_range-low = v_date.
   l_t_range-High = sy-datum.
modify l_t_range index l_idx.
p_subrc = 0.
Thanks,
I am closing this thread

Unable to find my info package in the info source

Hi all,
I am unable to find my info package in the info source, When i try to activate data from ODS to Cube then i can see the Info package, I have to do any setting for this problem or any suggestions guys.
Thank you
DST

Hi DST,
It might be that you are using someone elses DataSource hence you don't see the InfoPackage for your InfoSource and the other person has loaded data into all the data targets including yours. Hence you see the InfoPackage in the ODS.
Try to find the InfoPackage location for all the InfoSources. in the InfoSources make select find and give the InfoPackage name from the ODS. It should give the location of the InfoPackage.
Hope this helps!!
NewBW

"The selected port, COM1, is not available..."

I had a Sony Clie working just fine on my new Dell XPS 400 with Windows XP 2005 Media edition. It died on me and when I went to recharge it, I got a message I'd never gotten before:
"The selected port, COM1, is not available at this time. HotSync Manager will open the port when it becomes available."
I just bought a new Palm Z22 and I'm having the same problem.
The crazy thing is, I HAVE NO COM (SERIAL OR PARALLEL) PORTS ON THIS COMPUTER! Consequently, there is no "Ports" icon in the Device Manager.
I'm totally stumped. Any help would be greatly appreciated!!
Post relates to: Palm Z22

I am having the same problem on both my PCs (HP Laptop and Dell Laptop) using Bluetooth via USB. I can connect with the cable just fine every time. I also successfully HotSynced via Bluetooth the first time.
After shutting down the PCs, the I get the "The selected port, COM X, is not available at this time. HotSync Manager will open the port when it becomes available."
I've gone in to the Microsoft Bluetooth manger and added and deleted ports several times. That hasnt worked.
Help!!!

Info Package Selection Language key is not diplaying while this is checked

Similar Messages

Maybe you are looking for