Info Provider Data Space

hello
Can anybody let me know the procedure or any method to get that how much data space is occupied by an info provider at BW side?? Is there any T-code or any formula to get the space figure?
also can any body tells me that if I have a table (/BIC/B00004XXXXXXX) in BW then what does its info provider's name??
I search for all related documents not get the answer..
Thanks in advance
Neha..

Hi,
You can find the information in the Tcode: DB02, there you will have the option Table/View information, if you click on that it goes to the next screen, there you will have to give infoprovider tech name like /BIC/F****, then you can able to see the size and other information of the infoprovider.
Hope it helps.
Veerendra.

Similar Messages

Download info provider data in CSV

Hello BI experts,
i have a requirement to download the info provider data in a csv file. I am aware of GUI_DOWNLOAD Function Module but i am not sure which table should i use to extract data in a csv file. for example, if i need to download data from a infocube i need to write a program. can someone help me

Hi,
-> There are many options to download the data if you have application server you can mention the path (in listcube) where you want take the data and schedule a background job.
->You can also create a openhub on the cube and download the data.
Hope this helps...........
Rgs,
I.Ravikanth

Demand release through Info Provider data in decimal

Hi,
When I release the demand through Info Provider for a FERT items,after extraction of the data in info provider we get the data in fractions.
The demand was entered at the lowest heirarchy.
Kindly suggest how to over come this issue .
Regards,
Sadasivam R K.

when you release from DP to SNP the message is a warning. I think if you continue it will transfer to BM. Just that these sales orders in SNP will not work like normal sales orders. The warning explains more about this
/SAPAPO/REL_TO_SNP is the release of data from infoprovider to SNP. This is meant to allow only the FA, FB, FC and FD category orders only
The restriction is because there are more than just the category groups that go into a order type - for eg the ATP category or check mode
Now if you want your sales orders it would be a good idea to CIF it from R3 or use the sales order BAPI_SLSRVAPS_SAVEMULTI2 or use SAPAPO/SJKTST04

How to combine two Info provider data matained at different line items?

Hello Friends,
I have a requirement in which they want to combine the invoice line item data with the GL line item data , in which both are maintained at different line items.......
For e.g:
DSo 1:
Invoice no                Inv line item         Net price
5100000674            10                         300
5100000674            20                         400
5100000674            30                         200
5100000674            40                         100
DSO2:
Acc Doc no            Line item            GL account    Invoice number            amount
9480000000               1                      21110000         5100000674          100
9480000000               2                      31110000         5100000674          200
I tried Infoset, but multiple lines are generating..... as both the line items are maintained at different line items..... Please help me with some ideas and suggestions.......
Thanks for your time..............................................................................

Hi,
You should maintain the InfoObejcts (Charecteristcis) in both DSO's other wise it will disiplay # in reports.
1. While loading the data to DSO's use LOOKUPs in transformations and load teh full fledged data to DSO-2, (in sequence if it will come in second place.)
2. Check with InfoSet Innrr/Outer Joins option.
Else use FM based on both DSO's and cretae DataSourcea nd load the data to another DSO/Cube and build report on that.
Thanks
Reddy

Information Broadcasting(Event Data change in Info provider)

Hi All,
Does anyone have experince on the functionality Information Broadcasting ,Can you please help me where we use Trigger event when change in the info provider in the process chains.I want to know when we use the (Trigger event in the Broadcaster) in the process chains,how will it take effect in the Information Broadcasting scheduler screen when we select the particular Info provider when there is any data change.Can you please elaborate on the topic if any one has used the event data change in the info provider.Actually I Executed and scheduled the pocess chains, when I go to the Process chain log ,It says that the Job is finished and the data change is occured for the Cube,but I dont get any error message and I dont get any mail to my Inbox.Can you please through some light if anyone has worked on this,Answers are always appreciated and rewarded.
Thanks.

Hi,
Usually we trigger an event in SM64 tcode..if u want to create an event u will go for SM62.
In addition to time- and calendar-based job scheduling, the background processing system supports event-driven scheduling.
Triggering an event notifies the background processing system that a particular condition has been met. The background processing system reacts by starting any jobs that were waiting for that event.
Events are not saved. Once an event occurs and triggers any jobs that were waiting for that event, the event is discarded
U can monitor process chain via Tcode 'CCMS'..
Information broadcasting allows you to make objects with Business Intelligence content available to a wide spectrum of users, according to your own requirements.
Go through this
Information Broadcasting:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm
Including an Event Data Change in a Process Chain :
http://help.sap.com/saphelp_nw04/helpdata/en/ec/0d0e405c538f5ce10000000a155106/content.htm
Regards-
Siddhu
Message was edited by: sidhartha

BEX F4 help values from posted values in Info Provider not from Master data

We have an info object called Archival purpose and it is display attribute of Master data info object Archive Number. Both Info objects are used in a cube. Posted values in cube have only two value for info object Archival purose which is "EXCOM" and "EA".
But when we do the F4 in the bex query, we see some other F4 values. Although Master data is having other entries but we have defined in the bex property of both the info object to read the f4 value from the posted values in the info provioder.
Please suggest how to get values in bex F4 help only from posted values in info provider and not from the master data.
Thanks

Hi,
You don't need to change the Infoobject definition as it will become global and it will be applicable for whereever this infoobject is used. Instead you can manage this setting for this particular Infoprovider.
Go to RSA1 and double click on your infoprovider used for this query, go to change mode. From the right hand side dimension tree search for the Infoobject for which you want to maintain this property. If it is navigation attribute then you can search it in navigation attribute tree.
Once you find the infoobject right click and from context menu choose the first option "InfoObject specific properties". In the next popup in the last option about F4 values for filter you can select the option, "Only values from Infoprovider".
Regards,
Durgesh.

Error reading data from Info Provider

Hi Folks,
I am executing a report and am getting the following error message:
Error reading data of Info Provider.
System Error: Whole Number Overflow on Multiplication.
The infoprovider being read is a Virtual Info provider Based on DTP/3.x InfoSource.
Let me know what could be the potential problem here ? How would I fix such issues.
Regards
Arjun

Hello,
There is some problem in data. Check if in transformation u have any formulas or routines.
regards,
Shashank

Targets not providing data exceeded the critical threshold

Hi all,
 
I received the following alert in the enterprise manager:
 
Name=Management Services and Repository 
Type=oracle_emrep 
Host=null 
Metric=Targets not providing data 
Timestamp=Oct 5, 2006 4:15:37 PM GMT-07:00 
Severity=Critical 
Message=Targets not providing data exceeded the critical threshold (0). Current value: 3 
Rule Name=Agent Upload Problems 
Rule Owner=SYSMAN 
 
(1) What does this alert mean? 
(2) Which documentation or refrence I can use to check explanations of the EM alerts? 
 
Thanks in advance.

It means what it says. Your agents are no longer providing information to the oms, so info for any metrics you have set is no longer being collected.
Check the agent logs. An example as to why this could happen is the agent has run out of space and it disables collections to save blowing the file system

Targets not providing data is below the warning threshold

Hi all,
 
I received the following alert in the enterprise manager:
 
Name=Management Services and Repository 
Type=oracle_emrep 
Host=null 
Metric=Targets not providing data 
Timestamp=Oct 5, 2006 4:15:37 PM GMT-07:00 
Severity=Critical 
Message=Targets not providing data exceeded the critical threshold (0). Current value: 3 
Rule Name=Agent Upload Problems 
Rule Owner=SYSMAN 
 
(1) What does this alert mean? 
(2) Which documentation or refrence I can use to check explanations of the EM alerts? 
 
Thanks in advance.

It means what it says. Your agents are no longer providing information to the oms, so info for any metrics you have set is no longer being collected.
Check the agent logs. An example as to why this could happen is the agent has run out of space and it disables collections to save blowing the file system

Short dump when expand info provide

Dear all,
I have 0GL_ACOOUNT info object that act as a master data.
the problem is when I want to expand at the info provider instantly create short dump
the overview of the short dump is :
Runtime Errors ASSERTION_FAILED
Date and Time 12.08.2009 10:08:16
Short text
 The ASSERT condition was violated.
What happened?
 In the running application program, the ASSERT statement recognized a
 situation that should not have occurred.
 The runtime error was triggered for one of these reasons:
 - For the checkpoint group specified with the ASSERT statement, the
 activation mode is set to "abort".
 - Via a system variant, the activation mode is globally set to "abort"
 for checkpoint groups in this system.
 - The activation mode is set to "abort" on program level.
 - The ASSERT statement is not assigned to any checkpoint group.
What can you do?
 Note down which actions and inputs caused the error.
 To process the problem further, contact you SAP system
 administrator.
 Using Transaction ST22 for ABAP Dump Analysis, you can look
 at and manage termination messages, and you can also
 keep them for a long time.
Information on where terminated
 Termination occurred in the ABAP program "CL_RSAWBN_OBJ_IOBJ_DATA=======CP" -
 in "GET_TRFN_AWBSUBOBJ".
 The main program was "RSAWBN_START ".
 In the source code you have the termination point in line 23
 of the (Include) program "CL_RSAWBN_OBJ_IOBJ_DATA=======CM005".
Source Code Extract
Line SourceCde
 1 METHOD get_trfn_awbsubobj .
 2
 3 DATA: l_tranid TYPE rstranid,
 4 l_s_source TYPE rstran_s_tlogo,
 5 l_s_target TYPE rstran_s_tlogo,
 6 l_objvers TYPE rsobjvers.
 7
 8 l_tranid = i_objnm.
 9 l_objvers = rs_c_objvers.
 10
 11 * get the source and target for the tranid
 12 WHILE l_s_source IS INITIAL OR l_s_target I
 13 TRY.
 14 cl_rstran_stat=>get_objects(
 15 EXPORTING
 16 i_tranid = l_tranid
 17 i_objvers = l_objvers
 18 IMPORTING
 19 e_s_source = l_s_source
 20 e_s_target = l_s_target
 21 ).
 22 CATCH cx_rstran_not_found .
>>>>> ASSERT sy-index < 2.
 24 ENDTRY.
 25 * for possible second run set objvers
 26 l_objvers = rs_c_objvers-modified.
 27 ENDWHILE.
29 * pass back the su
30 IF i_target = rs
31 re_awbsubobjec
32 ELSE.
33 re_awbsubobjec
34 ENDIF.
35
36 ENDMETHOD.
Please advice

HI,
I have read the sap notes and that is exactly what happen to me.
but I don't understand how to correct it.
It said :
This error cannot be corrected automatically. Use the method DELETE_VERSION_FROM_DB of the class CL_RSTRAN_STAT to delete the existing A version of the transformation manually in the target system.
Ensure that the transformation is permanently deleted from the database; therefore, you should verify that the correct transformation ID is specified (in the short dump, the TranID that is specified in the short dump is in the variable L_TRANID).
anybody know how to use delete_version_from_db ?
please advice

ITunes was unable to load provider data from Sync Services

Hello,
My itunes says : "iTunes was unable to load provider data from Sync Services", when i connect my iphones.
My iphones sync fine on my other computer.
This problem occurred when formatting my pc from work.
And this problem prevents me only sync tab "info" (contacts, calendar and Outlook). This does not prevent me to synchronize other tabs.
I already tried to reinstall itunes, and the diagnostic option.
Thanks in advance.

This problem has been ongoing since 9.2 came out ... i.e. quite some time.
I uninstalled and then removed all traces off Apple applications, then reinstalled back to the prior version and ran with no problems.
When I upgraded to V4 iPhone software I had to upgrade again and ran into the same problem.
Upgrading from Outlook 2000 to Outlook 2003 was of no benefit.
I have purchased Sync2, set up a gmail account and sync over wireless from Outlook to gamil, then from gamil to iPhone.
This only does calendar and contacts (haven't found a solution for notes) but waiting for Apple to sort this will probably see you old and gray.
Good luck.

How to get the latest update time of a info provider in ABAP

hi experts,
i am doing a ABAP program and need to get the latest update time of a info provider , does anyone know where it stores in BW or any other way to get it?
many thanks
WHY

Table : RSREQDONE
you can give INFOPAK_ID as parameter and search for latest/last Request ID and dispaly time and Date.
Cheers
Praveen

Move out Info Provider to other server without transport connection?

Hi All,
Could you share you thought ?
Is there a possibility to move out the info provider design & info object to other server without transport connection ?
The background is our project box will be decommissioned, and unfortunately it's not connected to development box. We've already found how to move out ABAP program, we generate it to XML, than upload it.
How about for info provider itself / info Object ? Is there a possibility to have the same treatment ?
Any thought from all of you ?
If you have the way, appreciate if you can share it to me.
Thanks a lot and have a good day,
Best regards,
Daniel N.

Hi,
From transport side, it is possible. You can create a dummy transport target system, then collect BI objects in request and release it. After release, the exported data is in dir_trans, you can manually copy it to realy target server, put them in dir_trans, and in STMS import Q, select from menu of import external request and import it.

Info provider not found for 2LIS_13_VDKON

Hi,
We are using 2LIS_13_VDKON data source for Billing Conditions ( Plug in 2004.1).
Am unable to find the Info Provider for this data source /info source at 3.3 content. ( Unless my selections were incorrect).
Shall you please kindly help me if this info source is already in use.
Our extraction was strcuked at PSA level because of No data target it looks like we need to built custom ODS/Cube.
Thanks for earliest reply.
kind regards
martin

found in 3.5 content.
Cheers
martin

BI Statistics NW2004S Content - Virtual Info Provider 0TCT_VC01

Hi
We implemented BI NW2004S statistics for front end OLAP analysis which consists of info providers 0TCT_C01, 0TCT_C02. However, when we activated the queries, we are not seeing enough data in queries even though the info providers are loaded correctly. SAP has provided content for 0TCT_VC01 & 02 as virtual info providers which are used in multi providers -0TCT_M01 & M02 along with the base info providers mentioned above. All content queries are built on these multi providers and currently in our multi provider we have just base info providers but not virtual info providers.
Now my question is, on virtual info providers - These virtual info providers are based on DTP and am just wondering which data source I should use to maintain transformation as info provider based on DTP would require transformations to load the cube. I have used data sources 0TCT_DS01 & 02 to map transformations to base info providers 0TCT_C01 & C02 respectively.
Pls confirm on how I should use these virtual info providers as part of multi providers and which data source should I use to maintain transformation.
I am hoping that by including virtual info providers into the above multi providers, I would be able to see the data to analyze query performance during user navigations.
Appreciate your response.
Thanks

RSDDSTAT_OLAP->0TCT_DS01(data source)->InfoPackage->0TCT_C01(0TCT_MC01)->0TCT_MC01_Q*(queries)
The cube 0TCT_C01 gets filled from data source 0TCT_DS01 which is again gets data from the view RSDDSTAT_OLAP.
So whenever you run queries (3.x or 7.0) or templates (3.x or 7.0) or workbook (3.x or 7.0), this view gets filled.
So, you please schedule the releavant process chain or infopackage which will fill the cube 0TCT_DS01, then you will be able to use the queries built on this cube.These process chains are starting with 0TCT*.The installation steps and scheduling steps are very well explained in the note 934848.
P.S. SAP delivered queries are based on multicube 0TCT_MC01 (built on 0TCT_C01 and 0TCT_VC01) and not on 0TCT_C01
0TCT_VC01 Usage -
The purpose of virtual cube 0TCT_VC01 is to give delta data.
For ex, you would've scheduled the process chain for loading 0TCT_C01 every day in the mid-night. If you are running the query built on 0TCT_MC01 cube in the morning, you will miss the data from yesterday mid-night till today morning. To give this delta data, the virtul cube is used in the multi cube.
Hope it Helps
Chetan
@CP..

Info Provider Data Space

Similar Messages

Maybe you are looking for