Info Record creation for Pipeline Material

Hello,
I am having issued while creating the Info records for a Pipeline Material(water)
This is the error.
"Material XXXX not a pipeline material" where as I have created the material as a Pipeline.
I have Info Record created previously for other plants within same Porg and CC.
Need the Info record in the Process Order where it does not allow to confirm the Order without the price that comes from Info Record
Can anyone tell me what is the issue?
Thanks
SAP Fans...

Hi,
Confirm that the material XXXX is created under material type "PIPE"
check for the material type in T code OMS2, whether "Pipeline mandatory" is active. And under "Quantity/value updating" option "Quantity updating" and "Value updating" should not be active.
Hope it helps..
Tx
Uts
Award f helpfull

Similar Messages

Restrict Info Record Creation Based on Material Type

Dear colleagues
I would like restrict material info record (ME11) creation based on given materialsu2019 material type (MARA u2013 MTART). Is it possible such control? If yes, can you please provide the way?
Best regards

Dear AP,
Unfortunately I wasnu2019t able to find any user exit, badi or etc. That's way I need to post the question to the forum. Before providing any answer please consider that no question is post without any research and give the audience specific, to the point answers not such irrelevant ones.
Thank you

Q-Info Record found for material rev level 06

Dear All
I have an error Q-info record found for material xxx rev level 06 while doing migo inbound delivery. Even i verify with some documents also but till not to come out of this problem. Is any body having solution.
Please specify whether it is minor or major problem.
Awaiting for ur reply

In QI01/QI02--->You must have created the quality Info record for the vendor /material/revision combination.
Suppose Material for which PO is cretaed is having latest revision 6 & infor record exists for rev 5 or less and not for rev level 6 ,then you may get this error.Also if relase date for vendor /material/revision combination is not valid then also you can get such error.
only way is you can create with future relase date..and chaeck again.

How to assign the vendor for Pipeline material like Oil,power etc.

Dear All,
Can anybody tell me , how tp assign the vendor for Pipeline material like Oil,power etc.

Dear,
Create source list ME01 maintain vendor here if vendors are multiple.
Create Info record ME11for vendor and material combination
Regards,
R.Brahmankar

Po for pipeline material

Hi guys,
Can we create a purchase order or contract for pipeline material?

Hi,
Pipeline material is a material that flows directly into the production process from a pipeline (for example, oil), from a pipe (for example, tap water), or from another similar source (for example, electricity). A material from the pipeline is always available; i.e. it can be withdrawn from the pipeline at any time and in any quantity. Consumption of the material is settled with the vendor on a regular basis
1. Cretae Pipeline material with material type Pipeline
2. Cretae Source list,
3. Cretae Info record and maintain Price,
po etc is not genrated u can directly do the good issue
The Accounting Generated After GI/Settlement are:
1. Goods Issue
Consumption A/C: DR
A/c Payable For Pipeline : CR
2. Pipeline Settlement
A/c Payable For Pipeline : DR
Vendor Account A/C: CR
Reward points if helpful,
Regards,
Archit

Info records flagged for deletion don't update purchase orders

Hi, I would like to know how I can customize SAP-MM in order to avoid that the info records flagged for deletion update the purchase orders.
When I create a PO from a Purchase requisition (which have data with texts like "Vendor material number"), the Info record flagged for deletion update this data.
Thank you

Hello
I think inforecords flagged for deletion is not being considered for PO updation. Could you please check again.
It might be posible that 'Vendor material number' is spcified in Purchase requisition and when you create PO from Purchase requisition, it is copied from there to PO.
I hope it will resolve your issue.
Best regards
Avinash

Quality check for Pipeline Material

Hi MM Guru's
Is it possible to do quality check for Pipeline Material?
If yes what is the process.
Thank you
Venu

you can create a manual inspection lot, analyze a sample and record the results.
but you cannot have a quality stock and do not do a transfer posting from quality to unrestricted or quality to blocked.
There a many chemicals that are transported via pipeline and managed as pipleline materials, either supplied by a supplier in the neighborhood or even cross country. And it is needed that you want do quality checks on certain materials before you use them.
Search the QM forum, you may find some discussions.

Can a PO be generated using Info record marked for deletion

Hello all,
Is it possible that PO be generated using Info record marked for deletion?
Observed that a info record is marked for deletion but still able to see a PO generated using this info record.
Is this becasue - PO can be generated untill info record is actually deleted from the system during next reorganization run?
What is reorganization run?
Regds.,
Chaitanya

Hello S. Iyer,
I have following queries -
1. What is meaning of your statement -
"If you want to restrict creation of POs against deleted info record"
Do you mean that info record is "deleted" or "marked for deletion"?
2. Any way, is there difference between two - "deleted" or "marked for deletion"?
3. Where in the info record I can see history of marking for deletion to see who and when marked it for deletion?
4. Observed that there is a message that comes up that info record is marked for deletion.
Is there indication on info record itself like - permanent record, tick mark to indicate that it is marked for deletion?
Regds.,
Chaitanya

Purchasing Info Record marked for deletion

Hi experts,
I need some explanation on Purchasing Info Records and more precisely on the deleted ones.
Could you tell me why a Purch. Info Record that is marked for deletion is still set when a PO is created?
In ME13 I have the following warning message : 06-718 (Purchasing info record & & & & flagged for deletion).
In ME21N the same message is displayed as warning and users are able to save the PO with the deleted Info Record.
I don't understand why SAP still retrieves Info Records that are marked for deletion...
Is there a way to prevent SAP from using deleted info records?
Thank you for your help.
Regards,
Philippe

Hi Philippe,
The message 06718 can be set as an error or warning in customising.
If message 06718 is set as error then system will not allow to save
the document with that info record.
The deletion indicator is the reservation to delete this record. But
this is not comparable with the deletion of the record from the database
This has to be done within the archiving run for the object MM_EINA.
Untill this inforecord is not archived the data is taken as usual."
Online documentation provides the following information
"You cannot delete obsolete info records immediately. You can
only flag them for subsequent deletion. Info records earmarked for
deletion in this way are not actually deleted until the archiving
program is run. This is done at regular intervals by your system
administrator. You can flag an individual info record for deletion,
or create a list of deletion proposals and choose the relevant records
that are to be deleted from this list."
Kind regards,
Lorraine

MIGO for pipeline material

Hi,
I am trying to post MIGO for pipeline material, while at the same time I am facing following problem while executing:
1. At the time of the Goods Issue of the Pipeline material, the error ocured: Account determination for entry INT GBB _____ VBR not possible.
So maintained an enntry for the same in the OBYC setting, but received a new error: period 001/2005 is not open for a/c type S & G/l A/c 790000
Thus tried to solve it by going in FS00, but change authorisation was not available.
Please help me in coming out of this
Thanks
Ritesh

Hi,
Now Use t.code: OB52 and open current period in Account Types S and specially Account Type + which stands for valid for all accounts type and save( also can check A, K, D,M,). Better consult FICO consultant for OB52 step.
Also Check in T.code: MMRV and see which period is open for ur Co.Codeand back posting is allowed or not.In MMPV close the period last period and automatically system open the new one.
Regards,
Biju K

Sales order for pipeline material type..

Hi All,
How can we raise the sales order for pipeline material..
Is schedule lines will be there for the sales order raised for pipeline material???
Rgds,
Pavan

Hi
Seems you working on IS Utilities, please corerct if Wrong and if I am wrong to guess you are working on IS Utilities then the next story dosn't make any sence.
PIPEline material type is used for Materials such as oil, power, or water that flow into the production process directly from a pipeline, line, or other type of conduit. Since pipeline materials are always available, they are not planned.
To answer specifically what you asked would be as follows:
1. The fact that material type is PIPE from an SD standpoint is irrelevant
2. lets consider your PIPEline material is power, your UOM should be Kilowatt hours and establish price for it.
3. "deliver" the material and bill it.
However, taking the whole business context of sale of electricity into account why you want to sell PIPEline material without using IS Utilities. Typically electrical utiltity requirements have some unique challenges not easily met by SD:
1. Amount to be billed to the customer is from meter readings.
2. The bill to the customer ( at least in North America) is not so much of an invoice as opposed to statement of accounts that includes meter readings, consumption history etc.
I will suggest to look into IS Utilties first before getting into SD.

Info record mandatory for shopping cart creation in SRM classic scneario

Hi Gurus,
We are creating shopping cart in our SRM 7.01 system in classic mode. We have not created any info record for the product category and vendor in the backend ECC system.
Do we need create an info record for the particular combination of material group/material and supplier in the ECC backend system so that the shopping cart in SRM classic scenario creates a PO directly in the system?
Thanks and regards,
Ranjan

Hi Sam,
Thanks for your update. So, what you mean that the SRM shopping cart with a direct vendor or contract can create a PO directly in the backend system even if the backend system does not have nay info record for the particular combination of the material and vendor.
Thanks and regards,
Ranjan
Ranjan Sutradhar

BAPI for Purchase info record creation

Hi
Please let me know how to create purchase info record through BAPI, with tax codes along with material price.
please guide me.
Simha

Hi,
ME_MAINTAIN_INFORECORD
ME_UPDATE_INFORECORD
ME_GET_INFORECORD_CONDITIONS
ME_PRICING_INFORECORD.
ME_DIRECT_INPUT_INFORECORD
ME_POST_INFORECORD.

BAPI for Purchase Info record creation - ME11 transaction

Hi,
Is there any bapi or function modules which will create the Purchase info record in Me11 transaction and also bapi for change Purchase info record in Me12 transaction?
Points will be awarded.
Regards,
vinoth.

Hi,
ME_MAINTAIN_INFORECORD
ME_UPDATE_INFORECORD
ME_GET_INFORECORD_CONDITIONS
ME_PRICING_INFORECORD.
ME_DIRECT_INPUT_INFORECORD
ME_POST_INFORECORD.

Purchase Info Record - Creation

Hi,
I want to create a Purchase Info Record. I came to know that, the following FM's are used for creating a Purchase Info Record.
ME_INITIALIZE_INFORECORD
ME_DIRECT_INPUT_INFORECORD
ME_POST_INFORECORD
The following are my questions....
Is there any other FM's available for creating a Purchase Info Record. I want to test these FM's in SE37. Can anyone guide me with the minimum parameters required to run these FM's in SE37. How can I find the info record number created using these FM's.I mean to say.. there are no output parameters available in these FM's to know whether the PIR creation is success/wrong.
I request everyone to help me with your answers.
Many thanks !

Hi,
I am using the following information to execute the function module ME_DIRECT_INPUT_INFORECORD.
Material : 123
Material Group: 12164400
Vendor Account Number: 100015
Purchase Order Unit of Measure: PC
Purchase Organization: 460
Purchasing Group: 100
Currency Key: DKK
Plant: 316
I get the error 'Please adjust conversion factors in conditions'.
I do not know the root cause for this error. Can anyone guide me to solve this error? Have I missed any mandatory fields required to run the above mentioned FM?
Kindly help. Many thanks.

Info Record creation for Pipeline Material

Similar Messages

Maybe you are looking for