Info record & PO creation withou master data

Dear experts,
Please explain me
1. Can we create an Info record without material master
2. For creating a PO without material master,
    i) Account assignment, material text entry is must, apart from this any
        configuration is required?
    ii) Explain me the use of settings in IMG --- MM --- Purchasing -- Entry aids for
        items without material master.
thanks in advance,
regards,
Govardhan,V.

1. Can we create an Info record without material master
yes you can - create for material group
2. For creating a PO without material master,
i) Account assignment, material text entry is must, apart from this any
configuration is required?
No
ii) Explain me the use of settings in IMG --- MM --- Purchasing -- Entry aids for
items without material master.
If you are create material master w/o accounting view in this case system will take the valuation class based on the mateiral master
The assignment of a valuation class to a material group enables the    
system to determine different accounts for the individual material     
groups.

Similar Messages

  • BI 7.0 - Duplicate Record Error while loading master data

    I am working on BI 7.0 and I am trying to load master data to an info object.
    I created an Infopackage and loaded into PSA.
    I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
    I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
    My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
    I would appreciate your help to resolve this issue.
    Regards,
    Ram.

    Hi,
    Refer:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Creation of master data info object- data coming form a 3rd party system

    Hi All
    i need to create a master data info - object  which connects the customer and the corresponding plant..actually thios data is coming from a third party system and they have maintained 2 tables one for customer and one for the plant details and these 2 tables are connected through some common id which populates unquie id for each customer and is maintained in the plant table with the same id...now both these tables have to be merged together and to be cretaed as a single info object..can any one suggest  me as to how to proceed with it.
    Regards
    Shilpa

    Hi,
    Create a Z-InfoObject with the same format as is used in your 3rd party system for the commonid.
    Add Customer and Plant as navigational Attributes.
    Create an infosource with these three fields.
    Unload (in a CSV-file) the commonid with customer and plant from your 3rd party system.
    Load these data to BI into your newly created Z-commonid InfoObject.
    Success,
    Udo

  • Info object creation and master data attributes

    Hai All,
              I have customerid, customer name, customer address, customer location. Similarly I have buyerid,buyer name, buyer address, buyer location. I have some more fileds like this for seller and vendor. I am thinking of creating a central location for all this master data creating a infoObject with name "personid" and making all the others attributes like "personname", "personaddress", "personlocation". I will load all the details of customer, buyer, seller and vendor to these objects.
    The cental idea is to get all the master data to a central location and then create objects with reference to these objects and let all the data flow. so that I just load the central objects and everything takes whatever it wants from there.
    Now my questions
    1. Can I just create an object for customerid referencing personid and then as all the other attributes get copied, can I just report on it or do I need to again create all the info objects for the customer details? Also the same for all others buyer, seller and vendor.
    2. Is this of any problem if I am reporting on customer or vendor or buyer or seller's details?
             Please advise me if the above situation works and let me know if I am going wrong.
    Thank you.

    hi Visu,
    yes, you can do so, should no problem.
    business content has this kind of approach,
    0sold_to, 0ship_to reference to 0customer.
    and also 0employee if i'm not wrong.
    one thing to consider if the volume data is very high,
    put it as line item dimension in infocube.
    hope this helps.

  • Quality info record mass creation

    Hello Guys,
    Can we able to do mass creation of quality info records thru QI06 ? I want to load bunch of QIR as a manual load.
    I tried using qi06 in add option but I am getting a warning message that QIR is not changed.
    Is that only we can change it ? Pls help.
    Akash

    Hi
    For QI06:
    Read follwoing
    You can use this program to make mass changes to quality information records. When adding records, you can enter one or several materials. As a rule, the only materials used for processing are those for which QM in Procurement is active in the material master and a vendor release or quality assurance agreement is required by the control key.
    You can also select the materials using the material class.
    You can enter one or more vendors, for whom a quality information record is to be created.
    Using the selection criterion 'Only for purchasing info records', you can create quality information records for all possible material-vendor combinations, provided that purchasing information records already exist for these combinations.
    That means first of all you must enter Procurement key in QM view of that Material
    Second if you select multiple vendor for a material or maultiple materials with single Vendor.
    if you execute this then You will get the list of all possible vendor material combination for which QI can be maintained.
    by selecting line you can save them.
    The quality info records printed in the list have a traffic light indicator which denotes the following:
    Green light:  - All data is O.K.
    Yellow light: - Ordered quantity is greater than released quantity
            - There is no quality assurance agreement
            - Lock function is active
            - Validity period of QM system has expired
    Red light:    - Deletion flag is set
      You can select the "Set deletion flag"
      function using the menu
    Regards
    Sujit

  • Info record auto creation

    Hi all,
    When I create a PO and inform the auto info record creation, the plant information is not updated in the info record created. Is there any configuration regarding this? How can I set this to update by plant?
    Thanks in advance.
    Regards,
    Marcelo Buosi.

    Hi,
    Materials Management>Purchasing>Conditions-->Define Condition Control at Plant Level
    check also
    Materials Management>Purchasing>Environment Data>Define Default Values for Buyers>Settings for Default Values>Indicators>Info record update
    You assign default values that you maintained in Customizing to a user by entering the key of the default value in the user master record under the parameter ID "EVO".
    Andrzej

  • Duplicate records found while loading master data(very urgent)

    Hi all,
    One infopackage in the process chain failed while laoding the master data(full update).Its showing the following error-->duplicate record found ..1 record used in /BI0/PTCTQUERY and the same record occured in /BI0/PTCTQUERY tables.
    can anyone give me the solution...its very urgent...
    Thanks & Regards,
    Manjula

    Hi
    You can see the check box in the Processing tab page. Make a tick mark for the check box Ignore Duplicate Data Records indicator . When multiple data records that have the same key are transferred, the last data record in the request is updated to BI. Any other data records in the request with the same key are ignored.
    Help says that:
    To maintain consistency, ignoring duplicate data records is only possible if the data is updated serially. A serial update is when data is first updated into the PSA then, after it has been successfully written to the PSA, it is updated into the master data or text tables of the InfoObject.
    If a DataSource transfers potentially duplicate data records or if you manually set the Ignore Duplicate Data Records indicator, the PSA Only update type is automatically selected in the scheduler.
    hope it clears ur doubt, otherwise let me know.
    Regards
    Kiran

  • BAPI OR RFC FOR CREATION OF MASTER DATA

    Hi
    I want BAPI or RFC for master data creation,(Vendor,Customer,material,Service master)
    Vendor(MK01)
    Customer(XD01)
    Material(MM01)
    Service Master(AC01)
    Pls Help me on this
    Regards
    Rajan

    Hi ,
    For material
    BAPI_MATERIAL_SAVEDATA
    For service
    BAPI_SERVICE_CREATE

  • Data Source creation for Master Data from Flat File to BW

    Hi,
    I need to upload Master Data from Flat File. Can anybody tell step by step right from begining of creation of DataSource up to Loading into Master Data InfoObject.
    can any body have Document.
    Regards,
    Chakri.

    Hi,
    This is the procedure.
    1. Create m-data with or without attributes.
    2. Create infosource .
        a) with flexible update
             or
        b) with direct update
    3. Create transfer rules and assign tyhe names of m-data and attribute in "Transfer rules" tab and transfer them to communication structure.
    4. Create the flat-file with same stucture as communication structure.
    5. if chosen direct update then create infopackage and assign the name of flat-file and schedule it.
    6. if chosen flexible update the create update rule with assigning name of the infosource and the schedule it by creating infopackage.
    Hope this helps. If still have prob then let me know.
    Follow this link also.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Assign points if helpful.
    Vinod.

  • Adding new records from time dependent master data

    Hi,
    i need to keep track of asset movements between costcenters. currently we using costcenter hierarchy, which is not time dependent. But i can see asset movement from one cost center to another in asset master data. if i access costcenter from asset master data report is giving wrong values, because its reading last value of the costcenter. i am using 0FIAA_C11 AND 0FIAA_C12, I need to populate extra record for that asset when it moves one cost center to another cost center, if it moved in 2nd period of current fiscal year, i need to populate two records for that specific fiscal year.
    any suggestion or solution.
    regards
    raja

    If you make cost center a time dependent attribute of 0ASSET you will be able to track the changes undergone by an asset.  Anytime a costcenter changes for the asset there will be a new record that will be created and the old one will be delimited.

  • Creation of Master Data InfoObject

    Hi All,
    I need to modify 0COMP_CODE Master data Infoobject, with adding some fields as attributes.
    I need to add few fields to 0COMP_ CODE, based on tables.
    And 0COMP_CODE should pull data from source tables while used at reporting.
    Can you please help me on this.

    Hello Sri,
    You can add the required inobjects in the Attribute tab of 0COMP_ CODE masterdata object.
    Also mark them as Navigational if you want them to be used in reports for drill  down, navigation etc.
    Now either you can enhance the masteradata datacource for 0COMP_ CODE in source system or create your own custom datasource.  If you are modifying the already existing DS them you would have to write ABAP code in CMOD for those fields you are adding to 0COMP_ CODE.
    Replicate it to BW. Activate the datasource. Create transformations(modify transformation in case you haev modified the already existing DS)  to update these new fields to 0COMP_ CODE masterdata attribute.
    Now rest of  the things are same, like create DTP or IPs etc.
    Now as you would have marked these new objects as Navigational in 0COMP_ CODE masteradat attributes tab, you will be able to use them in query design.
    Hope it helps...
    Regards,
    Pratap Sone

  • RE: mass user creation of master data in webclient ui

    Hi,
    we have around 250 users that are to be created (Master data) in webclient UI, is there any way that we can create them massively at  a time and assign the BP roles to users or is there any method to pull them from ABAP side (already created users ids from ABAP side)
    Thanks,
    SSSSS

    Hi,
    You can write a report program to create users in the system.
    You can use FM 'BAPI_BUPA_CREATE_FROM_DATA' to do so.
    To assign created BP to the user ID, use FM 'BP_CENTRALPERSON_ASSIGN_USER'.
    Hope this helps!
    Regards,
    Saumya

  • Combining records for time dependent master data

    Good Day,
    We have a characteristic with turned on time dependency for master data.
    Bringing in data from the source generated a number of entries for the master data.
    Here is an example:
    Line 1: [Date 1] - [Date 2]
    Line 2: [Date 2] - [Date 3]
    Line n: [Date x] - [Date y]
    Any thoughts on how we can converge/aggregate Line 1 through Line n for the history, so that we have
    Line 1: [Date 1] - [Date y]...
    and then, going forward we can, use time dependency for any changes to master data that might come up.
    Thank You for your input,
    Dmitriy

    Hi Dmitriy,
    As far as I know, it is not possible, unless you delete the master data and reload.
    I don't think you will be able to delete the master data at this stage, because it will not possible to delete the master data without deleting the transaction data.
    Thanks,
    Krishnan

  • Creation of master data thru planning layout

    Hi SEM gurus,
    We have a text characteristic in the lead column of a layout. Is it possible that if I enter some values for that characteristic at run time and the values is automatically stored as master data?
    Thanks in advance!
    -SK

    Hi ,
    No its not possible to do that on Run time.since master data validation happens every time you save the data from the layou.Assuming that you have an excel layout and you are having ,say Material code in the lead column.If you want to create a new Material code and plan for the same,you should be able to do planning for a new Material code .But  you cannot save it into the master data.For doing this you can use the function modules present in the Group RSNDRI_MD. there you can find functions to Update master data ,update texts and also delete the Master on the run.you can do the Master data change by calling one of the update master data functions using an exit type function in BPS.
    hope this is of some help.
    regards
    Sai VIshnubhatla.

  • Updating record that exist in master data target but not master data sourc

    HI,
    I have PLANT key value "0004" that exist in my master data target ZPLANT, but this value has never sended by my source system, it was added only when I loaded my Infoprovider.
    My problem is that  this key value "0004" haven't text, and I would like put automatiquely the text of another value '0005' for this value '0004'.
    I'm in BI7 for information.
    Do you have any idea please? ABAP, Start routine or End routine?
    Andcould you give me please the ABAP code to do that?
    Radj.

    Thank you for your answer, but the source system doesn't contain the value '0004'.
    Can'I add this value while loading ZPLANT master data from source system?
    If yes, How can'I do it, and How can I maitain (automatiquely not manually) the text of '0004' key value?
    PS:
    The text of '0004' key value is the same as the text of '0005' key value'.
    Thank you.
    Radj.
    Edited by: Radjech Radjech on Jul 26, 2009 8:53 AM

Maybe you are looking for