Info Regarding Initial Configuration for BPMN?
Hi @,
I am new to BPMN I have installed the CE EHP1 with BPM addon. I just need to know whether I have to do any kind of configuration for working on the same.
I have created one Process but it is not working and I tried finding solution but couldn't locate the solution. Can you please help on the same.
Regards,
Amit
HI Amit,
Hmm... Just in case, here is the whole documenrtation on CE config:
http://help.sap.com/saphelp_nwce711/helpdata/en/45/a3c3f043cb0cf0e10000000a114a6b/content.htm
and Portal config:
http://help.sap.com/saphelp_nwce711/helpdata/en/5d/69a107210f4f2c81066808623404b5/content.htm
But I think the other docs I sent you should contain all relevant info on BPMN config. If not, could you pls tell me what you think should be enhanced, so that we can fix it and everything is clear? Thanks
Regards
Similar Messages
-
Need Help regarding initial configuration for distributed cache
Hi ,
I am new to tangosol and trying to setup a basic partitioned distributed cache ,But I am not being able to do so
Here is my Scenario,
My Application DataServer create the instance of Tangosolcache .
I have this config.xml set in my machine where my application start.
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<!--
Caches with any name will be created as default near.
-->
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>default-distributed</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<!--
Default Distributed caching scheme.
-->
<distributed-scheme>
<scheme-name>default-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<class-scheme>
<scheme-ref>default-backing-map</scheme-ref>
</class-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<!--
Default backing map scheme definition used by all the caches that do
not require any eviction policies
-->
<class-scheme>
<scheme-name>default-backing-map</scheme-name>
<class-name>com.tangosol.util.SafeHashMap</class-name>
<init-params></init-params>
</class-scheme>
</caching-schemes>
</cache-config>
Now on the same machine I start a different client using the command
java -Dtangosol.coherence.distributed.localstorage=false -Dtangosol.coherence.cacheconfig=near-cache-config.xml -classpath
"C:/calypso/software/release/build" -jar ../lib/coherence.jar
The problem I am facing is
1)If I do not start the client even then my application server cache the data .Ideally my config.xml setting is set to
distributed so under no case it should cache the data in its local ...
2)I want to bind my differet cache on different process on different machine .
say
for e.g
machine1 should cache cache1 object
machine2 should cache cache2 object
and so on .......but i could not find any documentation which explain how to do this setting .Can some one give me example of
how to do it ....
3)I want to know the details of cache stored in any particular node how do I know say for e.g machine1 contains so and so
cache and it corresponding object values ... etc .....
Regards
MaheshHi Thanks for answer.
After digging into the wiki lot i found out something related to KeyAssociation I think what I need is something like implementation of KeyAssociation and that
store the particular cache type object on particular node or group of node
Say for e,g I want to have this kind of setup
Cache1-->node1,node2 as I forecast this would take lot of memory (So i assign this jvms like 10 G)
Cache2-->node3 to assign small memory (like 2G)
and so on ...
From the wiki documentation i see
Key Association
By default the specific set of entries assigned to each partition is transparent to the application. In some cases it may be advantageous to keep certain related entries within the same cluster node. A key-associator may be used to indicate related entries, the partitioned cache service will ensure that associated entries reside on the same partition, and thus on the same cluster node. Alternatively, key association may be specified from within the application code by using keys which implement the com.tangosol.net.cache.KeyAssociation interface.
Do someone have any example of explaining how this is done in the simplest way .. -
Reg : Initial configuration for SLD
HI all ,
In the netweaver administration portal we have a option for deploy and change .when we click on that we have some options for initial configuration.Now the doubt that i have is that we have installed netweaver java stack on a server .We have configured local sld on that .We want to connect to a seperate ECC 6.0 system.That system doesnt have a sld configured for it .So we want to bring that system into our sld.I have configured NWA_01 i.e .configuration for local sld and NWA_03 i.e. create a connection to the SLD and Setting required authorizations for SLD (CIM client settings) in netweaver administrator portal.Do i need to configure only these or anything else other than this .One more thing is that when i enter the netweaver administrator portal i am getting these error messages.
System Landscape Directory is not accessible
Only local system can be administered
Any pointers regarding this.Thanx in advance .Hi there,
The java stack is installed as standalone or ABAP+Java?
You need to maintian SLD server details in RZ70 on ECC server and test if data is sent successfully. Check for RFCs SLD_UC/SLC_NUC in ECC.
Also, check if SLD server is running.
regards, Sean. -
Regarding Initial load for CUA
we are testing CUA migration in IDM7.0 version.
Already below systems exists in my place
1)IDM7.0
2)CUA System(ABAP)
3)ABAP systems(Child for CUA system)
Now how to integrate CUA with IDM7.0 and Migrate CUA User information. Instead of Connecting each abap system with IDM, we plan to connect CUA and take all the data to IDM.
so how to do this? Executing Initial load for CUA system will solve this problem ? or any particular process available.
please suggest us.
regardshi mathew,
thanks for your reply
Actually our initial step is to find to what extend CUA system information can be taken ove(Migrate) to IDM.
I feel It would be better to take all the Child system user info from CUA at one point rather than connecting each abap system with IDM. so that i can disconnect CUA once IDM is established.
So wondering how to integrate CUA system with IDM7.0, Executing Initial load for CUA system is same
as executing initial load fo ABAP system.
please shed light on this.
regards -
Need info regarding planning adapter for HAL
Hi all
We are using 9.3.1 on windows machine, I am wondering for HspJsHome.properties file where I can check the port number for RMI .
i just want to double check the port no for RMI is registered in planning or not.
I am unable to connect planning adapter with planning server, to my surprise i am unable to see HspJSHome.prper file in
Hyperion\HyperionPlanning\AppServer\InstalledApps\Tomcat\5.0.28\ HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes
we are using tomcat I am unable to see the folders from Hyperionplanning\webapps I didn't find them , after 5.0.28 i have only two bat files of start and stop planning bat files, and also I do have only one folder with name InstallableApps not InstalledApps ...in the above given path.
Did I make any mistake in installation.
I already created the planning applicattion and initialized the wrkforce and capex too...
regards
MarHi,
Version 9.3.x does not use the HspJSHome.properties file, all this information is now stored in the relational database for the planning system.
Cheers
John -
Need Info Regarding Unix Scripts for DBA's
Hi,
I'm a oracle DBA with little knowledge of Unix.
I wanted to write some shell scripts which will be helpful for DBA's regular activity.
As i'm a new to oracle with unix can any plese tell me what are all the activities can be done throgh Unix Shell Scripts also suggest me how to learn unix shell scripts quickly.
Thanks in Advance
GobinathanMaybe it is about time you leave your ideal world, and take a reality check.
You don't take into account, I would say all over the globe, with the likely exception of the University of Washington, companies unwilling to upgrade to a supported version of Oracle. Then there are companies who can't upgrade to a supported version of Oracle, as the third party sw doesn't support a supported version of Oracle.
Then there are companies who are unwilling to pay for OEM and/or database control.
My company can't afford to use OEM to manage all our customers.
Daniel, I think I know your answers. They are, and always have been highly unrealistic. You need to leave your paradise, and stop making people frustrated, because they have to stick with the (you so often use that word) paleolithic version of Oracle that has been presented to them.
They simply have no choice.
In the Netherlands 50 percent of the customers use 10g, 25 percent 8i and 25 percent 9i. You can climb your hobbyhorse every day, many of them won't upgrade, simply because management doesn't want to upgrade, as it doesn't buy them anything, apart from support, which is considered unimportant, as the application 'works'.
Apart from that, your assertion scripts aren't portable across platform is not necessarily true when you start using Perl (comes with Oracle).
There are many tasks for which shell scripts are still mandatory.
In fact Rman is one of them. As Rman doesn't support variables, you can't use OEM to set up a script which uses a proper tag in the backup command.
You need scripting to reset an alert.
You need scripting to rotate the log file of a listener.
Etc, etc, etc.
Sybrand Bakker
Senior Oracle DBA -
Problems with initial configuration for ipad 2 (Icloud)
I started having problems with updating some applications because I threw mistake my Id Apple and password, restoring the password and continue without solution, finish restoring manufacturing the device, and now asks me to set enter the Id Apple with which I set the same, the problem is that I do not know because I'd gift my father about 2 years ago, and does not remember. What I can do?
PD: My english is really bad.Jeewski wrote:
... finish restoring manufacturing the device, and now asks me to set enter the Id Apple with which I set the same, the problem is that I do not know...
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
Initial configuration of ACS 5.1 for EAP authentication for Wireless clients
Hi,
I have set-up with below devices :
Wireless LAN controller 5508
LAP 3302i
and ACS 5.1
since i am new in ACS 5.1 configuration , I need so information to go ahead to configure ACS 5.1.
which EAP method to use for wireless client authentication ? what is the best practice ?
I have gone through some cisco documents and it shows that best practice is to configure PEAP but for the same , I need to install certificate in ACS server as well in client PC. is that so ?
I have no clear picture for this certificate ?
from where i can get this certificate or do i need to purchase this certificate separately from cisco. how to install it in ACS server ?
I will be obliged to get atleast initial configuration for ACS 5.1 to enable the EAP method,
I need GUI based initial configuration for ACS 5.1
This mentioned ACS 5.1 is installed on ACS 1121 hardware appliance.Hi,
which EAP method to use for wireless client authentication ? what is the best practice ?
-> I would advise the most widely spread EAP method, which has the best ratio security/easy to deploy: PEAP with MSCHAPv2, which is available by default by all windows machines.
I have gone through some cisco documents and it shows that best practice is to configure PEAP but for the same , I need to install certificate in ACS server as well in client PC. is that so ?
-> You will always need to install a server certificate, however, there is no need for client certificate because the authentication is based on the MSCHAP credentials exchange, not certificate based. The only requirement on the client regarding certificates is the following.
If you want to validate the server certificate, you have to install the server certificate under the trusted CAs of the clients.
If you do not require to trust the server certificate, you can simply disable the option of server certificate validation.
I have no clear picture for this certificate ?
from where i can get this certificate or do i need to purchase this certificate separately from cisco. how to install it in ACS server ?
-> The server certificate can be a simple self signed certificate that you generate and install on the ACS GUI.
Please feel free to follow this step-by-step guide on
PEAP under Unified Wireless Networks with ACS 5.1 and Windows 2003 Server:
http://www.cisco.com/en/US/partner/products/ps10315/products_configuration_example09186a0080b4cdb9.shtml or in pdf
http://www.cisco.com/image/gif/paws/112175/acs51-peap-deployment-00.pdf.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
UCS C210 - Initial Configuration using DHCP
Hello All,
I'm trying to do the initial configuration for a C210 but we have no keyboard and monitor. So the idea was to use the default configuration on the Shared LOM, using DHCP. But i can't get an ip address.
We connected the server to the switch core, that is the DHCP server. The switch port is configured correctly. I can see the mac-address being identified by the switch, the LOM on the server is up, the switch port is up but cant get ip address.
So we are stuck right now, trying to get a monitor and keyboard.
Any clue on how to solve that?Hello Rafael,
i just want to sharing
For initial configuration i always use DHCP, this is my tool
For 1or2 Cisco UCS C-series if more then 3 just add the switch
1. laptop
2. Cat6 cable (cross/straight its ok
3. tftpd32
step:
1. plug cat6 cable to laptop NIC port and to 1GB LOM C210 (dont power the c210)
2. run tftpd32
3. configure DHCP server
4. configure your laptop NIC with static ip address (same subnet with DHCP pool)
5. turn off firewall on laptop
6. power on C210
7. open tftpd32 and monitoring the IP address..
if c210 already power up or didnt get the ip address you should unplug the power cable and plug again and power on the c210..
you must plug the cat 6 to 1GB LOM (port 1 or 2 its OK but dont plug to MGMT port) -
Quality info records: different pack configurations for same raw material
how can i differentiate different pack configuration for same raw material in quality info records, as one might approved and the other not? that is, besides creating different material master for each packaging?
thanks
AlisaYou need to use the MPN profile functionality that is a standard part of SAP.
In Config under the purchasing define the MPN profile. There are several options you can turn on/off including info records.
You assign the MPN profile to your material. It now is considered by SAP to be an internal material number.
You then create a HERS material type for each separate manufacturer material number you have. You only need the purchasing view for these materials. You can also create purchasing text views, classification and some others if you wish.
In the SAP approved vendors list (AVL), you then assign each manufacturer vendor(s) with the HERS material created.
You create a Q-info record for each manufacturer/HERS material combination.
Now, when you specify the internal material number in a PO, the system will tell you to order the MPN material. When you do the drop down for the material now, it will show you the approved manufacturers allowed in the AVL for the ordering plant.
When the 01 inspection lot is created you will have a vendor number as well as a manufacturer's number in the inspection lot. The DMR can be done by the manufacturer or the vendor depending on how you set up the inspection plan. Q-info record will be used accordingly.
Take a look at it and research it. It's not hard to set up.
FF -
Hi, Everyone,
I just got a new Cisco Wlan controller 4402 from somebody else but I can't find a suitable console cable( DB-9 console on the controller) , I googled everywhere and I read I could use service port to do the initial configuration, the CISCO FAQ says initial IP for service port is 192.168.1.1, I tried use Cross-over cable to connect a PC to the service port directly and use a normal cable with a switch to connect the service port and a PC, both of the connections do not work out: from the PC, I can't ping 192.168.1.1 ( PC IP changed to 192.168.1.20) , nor can I go http://192.168.1.1 . The service port Link is solid GREEN and ACT is solid GREEN, the PC NIC says Connected with 100 Mbps , so I'm wondering the IP address of service port is not 192.168.1.1? Please help.
Any sussgestions and advices are greatly appreciated.Hi,
plz connect service port to the switch port that should be configured as access.
connect a pc (ip address - as u mentioned) to the other port of the switch. both wlc and pc should be in same vlan (create a temperary vlan).
try https to access the wlc.
Thanks -
ORA-01658: unable to create INITIAL extent for segment in tablespace
NEW REPOSITORY INSTALLATION ERROR!!
I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
After pressing the Install button in the RAU:
-I take public synonyms
-I scheck the box for "Support Designer Objects", then
-The Repository size is Medium
-I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
After Starting, the Installation began an stop by installing some Tables like schown :
Operation: Started : 07/03/04 20:26:32
Reading File: cktabs.sql
Object : TABLE CDDL_TMP_TBL
Executing statement(s)...
Verifying...
.and so on till....uns so weiter bis
Reading File: cktabs.sql
Object : TABLE RM$INFO
Executing statement(s)...
Error Submitting Definition: User intervention required...
RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
Dumping Buffer...
CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
...End of Buffer
User Requested: Stop Process
When I read the Help of the Error the
CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
-pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
-And the installato still stop with the same Error.
Question: How schould I resolve this Configuration?
You could respond in ENGLICH, GERMAN or FRENCH
Thank you for your Help!You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
Regards
Sue -
SM 7.0 EHP1 SR1 - solman_setup initial configuration - No execute authority
I am performing the initial configuration step of SOLMAN_SETUP, when I receive the error below.
Error: E 002 No execute authority
Step: Get ABAP System Info
This occurs when I click the "Start J2EE Configuration" button on the J2ee Configuration screen(Step 3). This opens another browser window, where I enter the solman_admin user that was created in an earlier step. On the first screen, I enter the
Solution Manager Administrator(solman_admin), J2EE Administrator(j2ee_admin) user/password, as well as the password for the Technical Users (SLDDSUSER, etc).
The script then starts and stops on step 5 of 118, with the error shown above. Below is the output from the link provided on the error window. It is not clear to me, what execute authority is missing and for which user. Any suggestions on where to look for further details about this error, or possible solutions would be appreciated. Thanks.
InvokeService:Get ABAP System Info
Library: sap.com/tc~lm~config~bs
SourcePath ./com_sap_sld70x_scenario_simulate/process/process_2/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal
Time 2011/03/22 at 12:41:32
WSDL service/NW/AbapServer/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal.wsdl
Destination
<Destination name="ABAPHost" subtype="message" type="JCOConnection"> <JCOConnection><host>SUZUKI</host><user>SOLMAN_ADMIN</user><password>% secure content %</password><sysnr>00</sysnr><sapnr>001</sapnr><lang>en</lang></JCOConnection></Destination>
Destination parameters
user : SOLMAN_ADMIN
password : % secure content %
host : SUZUKI
sysnr : 00
client : 001
language : en
function name: S_TCC_LMCFG_LIB_GET_SYSINFOInput
<Input/>
InvokeService- Result: Error
Duration:734 ms
SourcePath./com_sap_sld70x_scenario_simulate/process/process_2/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal
Refresh Env. Messages: false
Output
<S_TCC_LMCFG_LIB_GET_SYSINFOOutput xmlns:system="http://sap.com/ctc/systeminfo"> <CLIENTS/> <SAPRL/> <LOGSYS/> <LOGSYSTEXT/> <SID/> <OPSYS/> <RETURN> <BAPIRET2> <TYPE>E</TYPE> <ID>SCTC_API</ID> <NUMBER>002</NUMBER> <MESSAGE>No execute authority</MESSAGE> <LOG_NO/> <LOG_MSG_NO>000000</LOG_MSG_NO> <MESSAGE_V1/> <MESSAGE_V2/> <MESSAGE_V3/> <MESSAGE_V4/> <PARAMETER/> <ROW>0</ROW> <FIELD/> <SYSTEM>SMXCLNT001</SYSTEM> </BAPIRET2> </RETURN> <CLIENT/> <COMPONENTS/> </S_TCC_LMCFG_LIB_GET_SYSINFOOutput>
Regards,
Russel RobbinsThanks to all for the suggestions.
I first reviewed note 1451426, but the changes discussed in that note, were already present in my system.
I then performed a trace while repeating the error, but I did not find any trace output (at first). I then added SAP_ALL and SAP_NEW to users SOLMAN_ADMIN and J2EE_ADMIN (just in case), and repeated the initial configuration step. After adding these profiles, the step completed successfully.
One additional note, after reviewing the trace information closer, I did find the failing object that was causing the issue originally (see below). This occurred for user SOLMAN_ADMIN. The other option would have been to add this object/value to one if the roles in use, as Ragu had suggested.
S_CTC RC=4 ACTVT=16;
Also, I noticed that in the trace, the only users reported were SOLMAN_ADMIN, SAPJSF and SLDAPIUSER, so the profiles were definitely not needed for user J2EE_ADMIN.
Thanks again for the suggestions from everyone.
Regards,
Russel -
Dialog queue Standstill after applying Java Initial configuration
Hi All,
I am installing NW 7.11 PI and after running Java Initial configuration with j2ee_admin user the system is not starting anymore.
On SAP MMC I notice the "message server connected ok" message and java process is starting.
Then it stops and I see message "Dialog queue standstill" and the system stops.
I can start oracle without issues but when I run R3trans -d I get Ora 1017 error.
I checked all notes regarding this error (400241, 1410573, etc) but no luck. I can connect to orace using sapsr3/<password>/@<SID> without issues. But on trans.log file I see the message that OPS$ can not connect even if I reset the password to default "sap".
It seems to me that tje problem is related to some issue with the Java instance but am not sure.
Please can any body help me out ?
Thanks and best regards,
JoaoHi Pranay,
In fact not. The abap instance is also stopped. BTW, it is on Windows 2008 and oracle 11.2.
When I stat the instances on sapmmc, i see on process list the disp+work.exe running, the message server connection ok and it tries to start the AS Java. Then I got that message "Dialog queue standstill"and then it stops.
I can not attach the complete dev_disp and dev_server0 files because they are too long.
See part of the dev_disp below.
I will send the dev_server0 in another query.
thanks very much for your help.
Mauricio
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "711"
sysno 01
sid DPC
systemid 562 (PC with Windows NT)
relno 7110
patchlevel 0
patchno 135
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile F:\usr\sap\DPC\SYS\profile\DPC_DVEBMGS01_fordnc01
pid 2772
Thu Aug 11 09:16:58 2011
kernel runs with dp version 120000(ext=118000) (@(#) DPLIB-INT-VERSION-120000-UC)
length of sys_adm_ext is 584 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2772) [dpxxdisp.c 1261]
shared lib "dw_xml.dll" version 135 successfully loaded
shared lib "dw_xtc.dll" version 135 successfully loaded
shared lib "dw_stl.dll" version 135 successfully loaded
shared lib "dw_gui.dll" version 135 successfully loaded
shared lib "dw_mdm.dll" version 135 successfully loaded
shared lib "dw_rndrt.dll" version 135 successfully loaded
shared lib "dw_abp.dll" version 135 successfully loaded
shared lib "dw_sym.dll" version 135 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Thu Aug 11 09:17:03 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6388]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >fordnc01_DPC_01 <
DpShMCreate: sizeof(wp_adm) 42864 (2256)
DpShMCreate: sizeof(tm_adm) 5796848 (28840)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm) 584080 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm) 156064 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=3800/16/364864/364880
DpShMCreate: sizeof(file_adm) 364880 (80)
DpShMCreate: sizeof(vmc_adm) 40896 (2152)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3936
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000C030050, size: 7210208)
DpShMCreate: allocated sys_adm at 000000000C030060
DpShMCreate: allocated wp_adm_list at 000000000C0330C0
DpShMCreate: allocated wp_adm at 000000000C0332B0
DpShMCreate: allocated tm_adm_list at 000000000C03DA30
DpShMCreate: allocated tm_adm at 000000000C03DA80
DpShMCreate: allocated wp_ca_adm at 000000000C5C4E80
DpShMCreate: allocated appc_ca_adm at 000000000C5D4890
DpShMCreate: allocated comm_adm at 000000000C5E42A0
DpShMCreate: allocated slock_adm at 000000000C672C40
DpShMCreate: allocated file_adm at 000000000C698DF0
DpShMCreate: allocated vmc_adm_list at 000000000C6F1F50
DpShMCreate: allocated vmc_adm at 000000000C6F2000
DpShMCreate: allocated gw_adm at 000000000C6FBFD0
DpShMCreate: allocated j2ee_adm at 000000000C6FC010
DpShMCreate: allocated ca_info at 000000000C6FCF80
DpShMCreate: allocated wall_adm at 000000000C6FCFA0
DpCommAttachTable: attached comm table (header=000000000C5E42A0/ft=000000000C5E42B0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpFileInitTable: init table for 3800 entries
DpSesCreateTable: created session table at 0000000002E10050 (len=161328)
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2999 blocks reserved for free list.
ES initialized.
Thu Aug 11 09:17:04 2011
Es2ResCreate: Changed resource parameters to
filenamePrefix =
blockSizeKB = 1024 KB
initialSizeMB = 240 MB
extendSizeMB = 120 MB
maxSizeMB = 5640 MB
DpVmcSetActive: set vmc state DP_VMC_ENABLED
DpVmcSetActive: set vmc state DP_VMC_ACTIVE
DpVmcInit2: o.k.
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
J2EE server info
start = TRUE
state = STARTED
pid = 1388
argv[0] = F:\usr\sap\DPC\DVEBMGS01\exe\jstart.EXE
argv[1] = F:\usr\sap\DPC\DVEBMGS01\exe\jstart.EXE
argv[2] = pf=F:\usr\sap\DPC\SYS\profile\DPC_DVEBMGS01_fordnc01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DPC
argv[7] = -DSAPMYNAME=fordnc01_DPC_01
argv[8] = -DSAPPROFILE=F:\usr\sap\DPC\SYS\profile\DPC_DVEBMGS01_fordnc01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1648]
***LOG Q0K=> DpMsAttach, mscon ( fordnc01) [dpxxdisp.c 12436]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >fordnc01_DPC_01 <)
DpStartStopMsg: start msg sent
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Aug 11 09:17:05 2011
CCMS: Initalized shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
CCMS: AlMsUpload successful for F:\usr\sap\DPC\DVEBMGS01\log\ALMTTREE.DAT (1495 MTEs).
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1295]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Thu Aug 11 09:17:44 2011
ERROR => DpHdlDeadWp: W0 (pid 4588) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W1 (pid 3296) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W2 (pid 4116) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W3 (pid 3240) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W4 (pid 4576) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W5 (pid 4456) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W6 (pid 3684) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W7 (pid 3540) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W8 (pid 3304) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W9 (pid 4068) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W10 (pid 3432) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W11 (pid 4952) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W12 (pid 4944) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W13 (pid 3588) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W14 (pid 4956) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W15 (pid 4044) died (severity=0, status=0) [dpxxwp.c 1548]
ERROR => DpHdlDeadWp: W16 (pid 2096) died (severity=0, status=0) [dpxxwp.c 1548]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1297
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Aug 11 09:17:54 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Aug 11 12:17:54 2011
========================
Number of work processes: 17
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
0 DIA -1 Ended no no 1 0 0
1 DIA -1 Ended no no 1 0 0
2 DIA -1 Ended no no 1 0 0
3 DIA -1 Ended no no 1 0 0
4 DIA -1 Ended no no 1 0 0
5 DIA -1 Ended no no 1 0 0
6 DIA -1 Ended no no 1 0 0
7 DIA -1 Ended no no 1 0 0
8 DIA -1 Ended no no 1 0 0
9 DIA -1 Ended no no 1 0 0
10 UPD -1 Ended no no 1 0 0
11 ENQ -1 Ended no no 1 0 0
12 BTC -1 Ended no no 1 0 0
13 BTC -1 Ended no no 1 0 0
14 BTC -1 Ended no no 1 0 0
15 SPO -1 Ended no no 1 0 0
16 UP2 -1 Ended no no 1 0 0
Dispatcher Queue Statistics Thu Aug 11 12:17:54 2011
=========================== -
Error while configuring initial configuration of ESR
Dear All
I am continuously facing problem while doing the post installation steps for Configuration of ESR in CE.
Here is the log trace attached. Please go through it and tell me the correct way.
I am using the TechEd07 DVD for the CE7.1 and downloaded ESR SP03 from SMP.
This is the error that I am getting when the execution reaches to 97%.
I am doing the initial configuration of the ESR and following the Installation Guide - SAP Netweaver Composition Environment 7.1 SP3 - Developer Edition
I am in the configuration wizard of the nwa and trying to configure 'Configuration of ESR in CE'.
I am getting one error, the log is below.
Can anyone tell me the way out and how can I insall CE7.1SP3 successfully on my system
The log is Error:
ClientServerException exception:Import failed: Internal error
during pvc call: Version management was unable to execute the
last action because a temporary internal lock has been set.
com.sap.aii.utilxi.misc.api.ResourceException: Import failed:
Internal error during pvc call: Version management was unable
to execute the last action because a temporary internal lock
has been set.
at
com.sap.aii.ib.server.transport.impl.utils.PvcUtils.throwRootCa
use(PvcUtils.java:86)
at
com.sap.aii.ib.server.transport.impl.pvc.GenPvcTransport.genPvc
Import(GenPvcTransport.java:82)
at
com.sap.aii.ibrep.server.transport.impl.pvc.RepPvcTransport.pvc
Import(RepPvcTransport.java:94)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.pvcImport(TransportServiceImpl.java:789)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.importZippedStream(TransportServiceImpl.java:868)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.importXiStream(TransportServiceImpl.java:672)
at
com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.executeM
ETHOD_ID_WRITE_VERSIONSET(CmsHmiMethods.java:513)
at
com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(
CmsHmiMethods.java:128)
at
com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(Hmi
sServiceImpl.java:167)
at
com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.ja
va:212)
at
com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImp
l.java:98)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccesso
rImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMetho
dAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.ejb3.runtime.impl.RequestInvocationCont
ext.proceedFinal(RequestInvocationContext.java:43)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:166)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTr
ansition.invoke(Interceptors_StatesTransition.java:19)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource
.invoke(Interceptors_Resource.java:71)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transact
ion.doWorkWithAttribute(Interceptors_Transaction.java:38)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transact
ion.invoke(Interceptors_Transaction.java:22)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:189)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Stateles
sInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.jav
a:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Security
Check.invoke(Interceptors_SecurityCheck.java:21)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Exceptio
nTracer.invoke(Interceptors_ExceptionTracer.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChai
nsManager.startChain(DefaultInvocationChainsManager.java:133)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvoca
tionHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy2405_10002.process(Unknown Source)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmi
Server(HmisServletImpl.java:331)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmi
Server(HmisServletImpl.java:238)
at
com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(H
misInternalClient.java:70)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletI
mpl.java:532)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletI
mpl.java:670)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.runServlet(FilterChainImpl.java:163)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.doFilter(FilterChainImpl.java:82)
at
com.sap.engine.services.servlets_jsp.server.servlet.Authenticat
ionFilter.doFilter(AuthenticationFilter.java:124)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.doFilter(FilterChainImpl.java:74)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.run
Servlet(HttpHandlerImpl.java:425)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.han
dleRequest(HttpHandlerImpl.java:289)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.start
Servlet(RequestAnalizer.java:387)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.start
Servlet(RequestAnalizer.java:376)
at
com.sap.engine.services.servlets_jsp.filters.ServletSelector.pr
ocess(ServletSelector.java:85)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.servlets_jsp.filters.ApplicationSelecto
r.process(ApplicationSelector.java:160)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.WebContainerInvoker.
process(WebContainerInvoker.java:67)
at
com.sap.engine.services.httpserver.chain.HostFilter.process(Hos
tFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.ResponseLogWriter.pr
ocess(ResponseLogWriter.java:60)
at
com.sap.engine.services.httpserver.chain.HostFilter.process(Hos
tFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.DefineHostFilter.pro
cess(DefineHostFilter.java:27)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(S
erverFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.MonitoringFilter.pro
cess(MonitoringFilter.java:29)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(S
erverFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.server.Processor.chainedRequ
est(Processor.java:309)
at
com.sap.engine.services.httpserver.server.Processor$FCAProcesso
rThread.run(Processor.java:222)
at
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.
java:37)
at java.security.AccessController.doPrivileged(Native Method)
at
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThr
ead.java:152)
at
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.
java:247)
Caused by:
com.sap.aii.ib.server.propagation.XIPropagationException:
Internal error during pvc call: Version management was unable
to execute the last action because a temporary internal lock
has been set.
at
com.sap.aii.ib.server.propagation.XIPropagationException.create
FromException(XIPropagationException.java:67)
at
com.sap.aii.ib.server.propagation.PropagatorImpl.importXiConten
t(PropagatorImpl.java:239)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccesso
rImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMetho
dAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.aii.ib.server.pvcadapt.PvcTransactionControlProxy.invok
e(PvcTransactionControlProxy.java:79)
at $Proxy2571_10002.importXiContent(Unknown Source)
at
com.sap.aii.ib.server.propagation.Propagator.importXiContent(Pr
opagator.java:92)
at
com.sap.aii.ib.server.transport.impl.pvc.GenPvcTransport.genPvc
Import(GenPvcTransport.java:65)
... 69 more
Caused by: com.sap.aii.utilxi.misc.api.BaseException: Internal
error during pvc call: Version management was unable to execute
the last action because a temporary internal lock has been set.
at
com.sap.aii.ib.server.propagation.XIPropagationException.wrapRa
wException(XIPropagationException.java:150)
... 79 more
Caused by:
com.sap.aii.ib.server.pvcadapt.lockmgr.XiLockDeniedException:
Version management was unable to execute the last action
because a temporary internal lock has been set.
at
com.sap.aii.ib.server.pvcadapt.lockmgr.TransactionalLockManager
.createLockDeniedException(TransactionalLockManager.java:187)
at
com.sap.aii.ib.server.pvcadapt.lockmgr.TransactionalLockManager
.requestLock(TransactionalLockManager.java:86)
at
com.sap.aii.ib.server.pvcadapt.lockmgr.CentralLockManager.reque
stLock(CentralLockManager.java:113)
at
com.tssap.dtr.pvc.propagation.server.PropagatableBlobTransientC
lass.lockPropagatableBlob(PropagatableBlobTransientClass.java:1
10)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.getEx
clusiveLock(PropagatableProvider.java:644)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.setDa
ta(PropagatableProvider.java:574)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.impor
t_(PropagatableProvider.java:780)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.impor
t_(PropagatableProvider.java:821)
at
com.tssap.dtr.pvc.objectpers.Propagator.import_(Propagator.java
:104)
at
com.sap.aii.ib.server.propagation.PropagatorImpl.importXiConten
t(PropagatorImpl.java:233)
... 77 more
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@13a0af
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@9a81d3
Serialized exception:Version management was unable to execute
the last action because a temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@1c161b3
Step: Importing XI content
Retry StepSkip StepCancel Process
Thanks & regardsDear Rathish
Thanks for the reply and forwarding the problem to the developemnt team.
As I mentioned that the execution of the ESR failed when it reaced to 97%.
The error was it was not able to find some ..xi.. component and if you go to the log you will find that (come to the end in the log i.e. mentioned above)
" Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@13a0af
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@9a81d3
Serialized exception:Version management was unable to execute
the last action because a temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@1c161b3
Step: Importing XI content
Retry StepSkip StepCancel Process "
And also I am following one help from 'http://help.sap.com/saphelp_nwesrce/helpdata/en/46/b3a7d01b475a62e10000000a11466f/frameset.htm' and they say that you will have the 'zero admin template'.
But when I go to 'Configuration Management > Infrastructure > Java System Properties
In the template I can see 3 things and theya are:
1. instance_development
2. CE_Complete_Stack_development_full
ID43799
3. CE_Composition_Environment_development_full
and there is no zero admin template as given in the help that I getting from the above guide.
I think this is the issue (missing zero admin template)
I got this from the SMP but dont know when and how to deploy to CE.
Can you please help me in this.
Thanks & regards
Vivek
Maybe you are looking for
-
How do you make the resolution clearer in Acrobat documents?
I scanned in documents into pdf files inorder to be able to read them from the computer. But parts of the document are not clear and hard to read. I figured out how to get higher resolution by converting the document to word. But when it converted
-
I would like to rip my DVDs so that they are playable within iTunes. I know how to use Handbrake (and VLC) to rip HD an SD video files. That part is easy. However, I would like to recreate what the iTunes store does. When a video is purchased, two fi
-
Can't import songs from CD using iTunes 8.02
I noticed a few (random) corrupted music files following upgrading to iTunes to 8.02, and decided to try reload them from the CD's. The computer would add a few complete songs, but some would not load completely. (I only tried this with one CD, altho
-
Users files not showing updated version
Users complained that she has a file that she knows she edited 4/23/15 but the document says last modified 1/14/15. When i look at the backups it seemed that on 6/16/15 12:00pm the documents say last modified 4/23/15 But at 9:00pm the files say las
-
I have many files in a folder. 3 of the files have v2 in their file name here is the code I use to get all files with v2 in their name into a list. the result has a : as item 1 item 2 and 3 have the colon at the end of their name in the list item 4 h