Info required on Report Report Interface
Hi Experts ,
Can anyone please provide inputs regarding the Report Report Interface . Any document will be highly appreciated.
Regards
Garima
Hi Garima,
Links ................
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=3353440
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=2762562
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=1846978
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=180080
The steps to create RRI
1)Goto T code RSBBS
2)In the Sender Query -give the Query name
3)Press Create tab which is there on the Right Top
4)It will as for a list select the Query name in the Bottom
5)and Press OK.
6)Come back to the main Screen os RSBBS and Select the Receiver Query and click Assignments.
7)Make them objects as Delete.
8)Save and Execute the Query ,Sender Query.
9)Right Click on the Query ,we will find GOTO Tab ,Drill down further
we can view the Second Query.
10)we can view the Second Query through first query
Hope it Helps
Get bak if u have any issues
Rgds
SVU
Similar Messages
-
Report Report Interface: No applicable data found
Hi.
I m using the Report Report Interface and getting:
No applicable data found
while calling in GoTo the second Report.
While removeing the filters threre is data .
What conditions needs to be met that there is data displayed?
Thank You
MartinHi,
Please execute the second report separtely with the same filter with which you are getting 'No applicable data found'.
Please check whether executing second report gives you any data with same filter or not.
If it doesn't give , then it means there is no data available to be displayed for that particular filter combination in cube.
In that case you will have to filter the data which is available in cube or need to load the data as required.
Regards,
Amit -
Setting OBDC info on multiple reports (batch)
Hello,
Is there a way to set OBDC info for multiple reports at once. I have users with 100+ reports and we just changed SQL server, so that each report need to be pointed to the new server. Doing it manually by opening each report and manually pointing it to the new server is a real pain.
If there is a way we can do it in a batch that would save us a lot of time.
TIA!since you're changing servers, just editing the existing odbc connection (i.e. in the 32 Bit ODBC Data Source Administrator) to point to the new server should be all that is required as long as the table names and field names / types within those tables remains constant.
otherwise, there are 3rd party tools (usually cost) like 'rpt inspector' where you can do this. -
Report to Report interface - restrict query results
HI Experts,
following issue. i'm using the Report-Report interface to jump from a report to a very detailled report.
my concern is if the user don't filter the first report to a specific Item the receiver report can explode trying to get all items.
is there any technical possibility to restrict this i.e. display message or check the number of items selected?
note: i'm working with BEx analyzer.
thanks to all,
regards,
YounesHI,
there is a mandatory variables for time restriction.
but not for the material ids so this was the requirement.
are there any other possibilities?
thanks,
regards,
YNS -
Stock/requirment list report
Require a report to display the month stock requirment for the next two years based on the plant and mrp.
Hi Raju,
Please check this FM MD_STOCK_REQUIREMENTS_LIST_API.
Hope this will help.
Regards,
Ferry Lianto -
Report to Report Interface Error
Hello,
I have a summary query which needs to go to detail query. I used the RSBBS transaction to designate the sender and receiver query. I can see the "go to" option in the context box when I try to link from my summary to detail and see the detail query as available. However, when it tries to transfer, I get the following error. I know these queries are saved and active. I can run them each independently but cannot get the Report-to-Report Interface to work. Any help would be greatly appreciated.
Thanks,
Lynda
error:
query &v2 on infoprovider &v3 can't be assigned to the dataprovider &v1,
because it does not exist on the BW Server.Hi Chandran,
Thank you for your reply and the two links. I am reviewing the assignment details and have a few questions. I currently only have 2 fields assigned - as variables - material and plant.
Everything else is set to generic.
My first query is driven by one date variable which I created which takes a default of January 2008 and pulls Feb - Dec (used offset +1, +2, etc).
The summary report comes up with correct data.
Material Plant UOM Yearly Budgeted Amt Jan/Yr Feb/Yr March/Yr etc
The user then wants to drilldown to detail behind a month. i.e. Jan/Yr
I created the detail query to ask for material and plant which then provides
Material Plant Purchase Order Main Vendor Freight Vendor UOM Qty Recvd Price and Freight Amoutn
There will be multiple Purchase Orders.
One thing I am not sure about transferring fields. Do I need to designate the month/year as a variable in my detail query along with material and plant? I am a bit fuzzy as to the whole process.
Someone I worked with before mentioned that the sending query will pass the fields on the line where you click "go to"????
Thanks for your patience and help...
Lynda -
Bex report to report interface dynamically based on Value in the query
Hi,
Is it possible to change the destination of the report to report interface dynamically based on the data of the bex query?
For example my query has the below data
Plant | KPI | Quantity
P1 | A | 20.00
P2 | B | 25.00
When the user selects KPI A I want to navigate to Query 1, and when KPI B is selected to Query 2. Query 1 and Query 2 have completely different layouts, Instead of create to two destinations is it possible to pick one based on the KPI selected.
Is this possible in Bex report to report interface or any other way.
Please suggest
Thanks in advance.Hi
we have RRI in sap bw. ( TCODE RSBBS.)
Below article will enlighten you about this topic .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
hope this helps -
Using Report-to-Report Interface (RRI) in BEx Report Designer?
Dear experts,
I would like to know if it is possible to use Report-to-Report Interface in BEx Report Designer?
From what I read from this article
[(Creating Formatted reports using BEx Report Designer)|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ae5173-6112-2d10-d78f-e7779d269f25?quicklink=index&overridelayout=true], the RRI capability of query is not supported in BEx report. So is it true? And are there any workarounds to enable/emulate RRI capability in BEx Report?
Thanks in advance.
Regards,
JoonHi Joon,
It is possible to make RRI in BEX Report Designer by using Transaction Code - RSBBS .
Here you need to give the Target Query and Source Query names and than you can easily connect two reports or two levels of same report.
For further step wise description please check the below SDN document :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
I hope this document helps to sort out the queries.
Regards,
Akanksha -
CO 1SRJ-001: Too many line items selected via report interface
Report group/report 1SRJ/1SRJ-001 (CCentres: Rolling Year): provides an overview for the last 12 periods of actual and plan data.
When you access line item report RKAEP000 (KSB1 or KSBP) from report Cost Centres Rolling Year (1SRJ-001) using the report/report interface, too much data is selected.
For example, you enter fiscal year 2009 and month 8 in selection parameters, the report generates results for the last 12 periods: 2008/9 to 2009/8. But the line item report accessed via report interface selected ALL data for the fiscal years 2008 and 2009.
I searched and found Note 127643 that described a similar but not exactly the same situation. Have anyone have any problems with this report? Any suggestion is appreicated.
Regards,Issue with report 1SRJ-001 (S_ALR_87013631) has been resolved. The interfaced line item report selects all data records for fiscal years 2008 and 2009, instead of just for the selected last 12 months. The problem is due to missing restrictions for a characteristic, in this case, the from-period and to-period fields.
SAP has corrected the problem by issuing an updated version (1999) and the one we were using was the 1995 version. I imported the updated version of report from client 000 and now it works fine. -
Report-Report Interface ECC Reports
Dear all,
I'm making a report using report painter (TCode GRR2) and now I need to drill-down to the documents. I think that I can build it via report-report interface.
So, have I to use RSBBS tcode to built it? In fact, I need to built a drill-down to a ECC table, Is the process the same?
Could anybody explain me steps to follow to built it? thanks in advance.
Kr
Arriamu.You assign drill-down report at report group level (GR52).
Report/Report interface > Configure, use the "insert row" icon to assign reports. -
Hi,
Please help me in getting the report.
Require a report which should have PO No., Material Code, PO qunatity, GR quantity and payment to supplier with respect to GR.
Thanks...Go to MB5S for this report
and add the fields which you don't see on the screen from Current display varinat from the header
you will get all this information -
Which Table will have 'Report to Report Interface (RRI)' Details?
Hi all,
Which table will have 'Report to Report Interface (RRI)' Details after creating them with RSBBS Tcode, PLEASE.
Thanks in advance.Hi,
Serach in these tables
RSBBSCUBE
RSBBSCUBEDIR
RSBBSQUERYDIR
Cheers..
Krishna -
Report-Report Interface from BW to Project Systems
I'd like to jump from BW reports based on 0PS_C04 into the corresponding R/3 line items. If I specify CJ74 as the transaction target then run the BW report and choose the corresponding option from the 'GoTo' menu the following message is displayed. I find this very confusing -- it seems to be saying that the report behind the transaction cannot be used in the report-report interface, but in the procedure says always use the program in the report-report interface.
Can anybody understand what the message is telling us? Can anyone tell me how to jump to an R/3 line item report from BW Project System cube?
Thanks
Robert Williams
You cannot use the report-report interface to call up report RKPEP000
Message no. HF 800
Diagnosis
Line item report RKPEP000 is not suitable for the report/report
interface.
Procedure
Always enter RKPEP000 as the receiver report for project line items in
the report/report interface. This program uses the transfer parameters
to determine which line item reports can be accessed.Hi
I dont know whether you have solved the problem or not yet
But i came up with the same issue....
Use interface program RKPBW000 instead of RKPEP000 in the RRI settings.
OSS Note : 356166
Thanks -
Report to Report Interface - Pass Key Figures
Hello,
I have setup a RIR interface on a Query to jump to another query for detailed inforamtion - works perfect.The issue I am facing is,there's a particular Keyfigure value in the sender query (derived from a Cube) which does not exist in the receiver query(ODS). Is there a way to get this information across to the Receiver Query ?
Thanks,
hdevHi, Hdev.
Do you have any documentation on how the Report to Report Interface works? If not, could you explain briefly what it is? Much appreciated!
Thanks,
Sarah-Jane -
Report to Report Interface (RRI)
Hi,
I had a Query on a Cube (Multiprovider) and I had a query on DSO
How can i perform Report to Report Interface (RRI) for this two queries
ThanksGo to transaction RSBBS in the BW back end (i.e. via SAP Logon pad).
Add the name of the query based on the MultiProvider in the Sender box.
Click create.
Select Report Type BW BEx Query (default selection).
Enter name of query based on DSO in Receiver Object. Add the description for the query that you want to appear in the Goto menu in BEx Analyzer.
Click apply.
Save.
Done!
Maybe you are looking for
-
7 pin s-video to 4 pin s-video
My laptop has a 7-pin s-video port. all my Tvs have 4-pin s-video ports. how do i make them work together? Solved! Go to Solution.
-
IF WE DOES NOT SELECT ANY VALUE IN SELECTION SCREEN WHAT WILL BE THE OUTPUT
hi plz give me the answer for this
-
can anyone help me with a frozen iphone after update download, says its in restore mode. i do not want to loose my contact or info, how do I get my phone to work again????
-
How do i get my computer to recognize my computer
how do i get my computer to recognize my computer
-
Why no screen info in status??
Hello everybody, I just ran a std program: balvex01 and the selection scree (no. 1000) came up. then I hit F8 (execute button) to see the alv. but why was I not able to see the screen no for this alv in the system->status menu? What is the screen whe